This series contains a minor simplification of ibmvfc_init_sub_crqs() followed
by a couple fixes for sub-CRQ handling which effect hard reset of the
client/host adapter CRQ pair.
changes in v2:
* added Reviewed-by tags for patches 1-3
* Patch 4: use rtas_busy_delay to test rc and delay correct amount of time
* Patch 5: (new) similar fix for LPM case where CRQ pair needs re-enablement
Tyrel Datwyler (5):
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
ibmvfc: simplify handling of sub-CRQ initialization
ibmvfc: fix invalid sub-CRQ handles after hard reset
ibmvfc: treat H_CLOSED as success during sub-CRQ registration
ibmvfc: store return code of H_FREE_SUB_CRQ during cleanup
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 49 ++++++++++------------
2 files changed, 26 insertions(+), 27 deletions(-)
--
2.27.0
A hard reset results in a complete transport disconnect such that the
CRQ connection with the partner VIOS is broken. This has the side effect
of also invalidating the associated sub-CRQs. The current code assumes
that the sub-CRQs are perserved resulting in a protocol violation after
trying to reconnect them with the VIOS. This introduces an infinite loop
such that the VIOS forces a disconnect after each subsequent attempt to
re-register with invalid handles.
Avoid the aforementioned issue by releasing the sub-CRQs prior to CRQ
disconnect, and driving a reinitialization of the sub-CRQs once a new
CRQ is registered with the hypervisor.
fixes: faacf8c5f1d5 ("ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Signed-off-by: Tyrel Datwyler <[email protected]>
Reviewed-by: Brian King <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 384960036f8b..3dd20f383453 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -158,6 +158,9 @@ static void ibmvfc_npiv_logout(struct ibmvfc_host *);
static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *);
static void ibmvfc_tgt_move_login(struct ibmvfc_target *);
+static void ibmvfc_release_sub_crqs(struct ibmvfc_host *);
+static void ibmvfc_init_sub_crqs(struct ibmvfc_host *);
+
static const char *unknown_error = "unknown error";
static long h_reg_sub_crq(unsigned long unit_address, unsigned long ioba,
@@ -926,8 +929,8 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
unsigned long flags;
struct vio_dev *vdev = to_vio_dev(vhost->dev);
struct ibmvfc_queue *crq = &vhost->crq;
- struct ibmvfc_queue *scrq;
- int i;
+
+ ibmvfc_release_sub_crqs(vhost);
/* Close the CRQ */
do {
@@ -947,16 +950,6 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
memset(crq->msgs.crq, 0, PAGE_SIZE);
crq->cur = 0;
- if (vhost->scsi_scrqs.scrqs) {
- for (i = 0; i < nr_scsi_hw_queues; i++) {
- scrq = &vhost->scsi_scrqs.scrqs[i];
- spin_lock(scrq->q_lock);
- memset(scrq->msgs.scrq, 0, PAGE_SIZE);
- scrq->cur = 0;
- spin_unlock(scrq->q_lock);
- }
- }
-
/* And re-open it again */
rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address,
crq->msg_token, PAGE_SIZE);
@@ -966,6 +959,9 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
dev_warn(vhost->dev, "Partner adapter not ready\n");
else if (rc != 0)
dev_warn(vhost->dev, "Couldn't register crq (rc=%d)\n", rc);
+
+ ibmvfc_init_sub_crqs(vhost);
+
spin_unlock(vhost->crq.q_lock);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
@@ -5692,6 +5688,7 @@ static void ibmvfc_deregister_scsi_channel(struct ibmvfc_host *vhost, int index)
free_irq(scrq->irq, scrq);
irq_dispose_mapping(scrq->irq);
+ scrq->irq = 0;
do {
rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address,
--
2.27.0
The H_FREE_SUB_CRQ hypercall can return a retry delay return code that
indicates the call needs to be retried after a specific amount of time
delay. The error path to free a sub-CRQ in case of a failure during
channel registration fails to capture the return code of H_FREE_SUB_CRQ
which will result in the delay loop being skipped in the case of a retry
delay return code.
Store the return code result of the H_FREE_SUB_CRQ call such that the
return code check in the delay loop evaluates a meaningful value. Also,
use the rtas_busy_delay() to check the rc value and delay for the
appropriate amount of time.
Fixes: 9288d35d70b5 ("ibmvfc: map/request irq and register Sub-CRQ interrupt handler")
Signed-off-by: Tyrel Datwyler <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ba6fcf9cbc57..4ac2c442e1e2 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -21,6 +21,7 @@
#include <linux/bsg-lib.h>
#include <asm/firmware.h>
#include <asm/irq.h>
+#include <asm/rtas.h>
#include <asm/vio.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -5670,8 +5671,8 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
irq_failed:
do {
- plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
- } while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
+ rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
+ } while (rtas_busy_delay(rc));
reg_failed:
ibmvfc_free_queue(vhost, scrq);
LEAVE;
--
2.27.0
Reviewed-by: Brian King <[email protected]>
--
Brian King
Power Linux I/O
IBM Linux Technology Center