It's odd to adopt different error handling on failure of
pci_read_config_dword(). Check the return value and terminate
execution flow on failure of all pci_read_config_dword() calls
in this function.
Signed-off-by: Dinghao Liu <[email protected]>
---
drivers/mmc/host/sdhci-pci-o2micro.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 94e3f72f6405..51d55a87aebe 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -706,6 +706,8 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG0,
&scratch_32);
+ if (ret)
+ return ret;
scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
/* Check Whether subId is 0x11 or 0x12 */
@@ -716,6 +718,8 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG4,
&scratch_32);
+ if (ret)
+ return ret;
/* Enable Base Clk setting change */
scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
@@ -795,6 +799,8 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
+ if (ret)
+ return ret;
if ((scratch_32 & 0xff000000) == 0x01000000) {
scratch_32 &= 0x0000FFFF;
@@ -812,6 +818,8 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG4,
&scratch_32);
+ if (ret)
+ return ret;
scratch_32 |= (1 << 22);
pci_write_config_dword(chip->pdev,
O2_SD_FUNC_REG4, scratch_32);
--
2.17.1