Claiming the sibling control interface is a bit more involved and
specifically requires adding support to USB-serial core for managing
either interface being unbound first, something which could otherwise
lead to a NULL-pointer dereference.
Similarly, additional infrastructure is also needed to handle suspend
properly.
Since the driver currently isn't actually using the control interface,
we can defer this for now by simply not claiming the control interface.
Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Reported-by: Mauro Carvalho Chehab <[email protected]>
Cc: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
---
drivers/usb/serial/xr_serial.c | 25 -------------------------
1 file changed, 25 deletions(-)
diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
index 483d07dee19d..0ca04906da4b 100644
--- a/drivers/usb/serial/xr_serial.c
+++ b/drivers/usb/serial/xr_serial.c
@@ -545,37 +545,13 @@ static void xr_close(struct usb_serial_port *port)
static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
{
- struct usb_driver *driver = serial->type->usb_driver;
- struct usb_interface *control_interface;
- int ret;
-
/* Don't bind to control interface */
if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
return -ENODEV;
- /* But claim the control interface during data interface probe */
- control_interface = usb_ifnum_to_if(serial->dev, 0);
- if (!control_interface)
- return -ENODEV;
-
- ret = usb_driver_claim_interface(driver, control_interface, NULL);
- if (ret) {
- dev_err(&serial->interface->dev, "Failed to claim control interface\n");
- return ret;
- }
-
return 0;
}
-static void xr_disconnect(struct usb_serial *serial)
-{
- struct usb_driver *driver = serial->type->usb_driver;
- struct usb_interface *control_interface;
-
- control_interface = usb_ifnum_to_if(serial->dev, 0);
- usb_driver_release_interface(driver, control_interface);
-}
-
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x04e2, 0x1410) }, /* XR21V141X */
{ }
@@ -590,7 +566,6 @@ static struct usb_serial_driver xr_device = {
.id_table = id_table,
.num_ports = 1,
.probe = xr_probe,
- .disconnect = xr_disconnect,
.open = xr_open,
.close = xr_close,
.break_ctl = xr_break_ctl,
--
2.26.2
On Fri, Feb 26, 2021 at 11:08:26AM +0100, Johan Hovold wrote:
> Claiming the sibling control interface is a bit more involved and
> specifically requires adding support to USB-serial core for managing
> either interface being unbound first, something which could otherwise
> lead to a NULL-pointer dereference.
>
> Similarly, additional infrastructure is also needed to handle suspend
> properly.
>
> Since the driver currently isn't actually using the control interface,
> we can defer this for now by simply not claiming the control interface.
>
> Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
> Reported-by: Mauro Carvalho Chehab <[email protected]>
> Cc: Manivannan Sadhasivam <[email protected]>
> Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Em Fri, 26 Feb 2021 11:08:26 +0100
Johan Hovold <[email protected]> escreveu:
> Claiming the sibling control interface is a bit more involved and
> specifically requires adding support to USB-serial core for managing
> either interface being unbound first, something which could otherwise
> lead to a NULL-pointer dereference.
>
> Similarly, additional infrastructure is also needed to handle suspend
> properly.
>
> Since the driver currently isn't actually using the control interface,
> we can defer this for now by simply not claiming the control interface.
>
> Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
> Reported-by: Mauro Carvalho Chehab <[email protected]>
> Cc: Manivannan Sadhasivam <[email protected]>
> Signed-off-by: Johan Hovold <[email protected]>
That solved the issue with XR21V1410:
[ 8176.265862] usbcore: registered new interface driver xr_serial
[ 8176.265885] usbserial: USB Serial support registered for xr_serial
[ 8176.265921] xr_serial 2-1:1.1: xr_serial converter detected
[ 8176.266041] usb 2-1: xr_serial converter now attached to ttyUSB0
[ 8176.268023] printk: console [ttyUSB0] enabled
[ 8186.512841] usb 2-1: USB disconnect, device number 5
[ 8186.513131] printk: console [ttyUSB0] disabled
[ 8186.513340] xr_serial ttyUSB0: xr_serial converter now disconnected from ttyUSB0
[ 8186.513376] xr_serial 2-1:1.1: device disconnected
Tested-by: Mauro Carvalho Chehab <[email protected]>
Regards,
Mauro
> ---
> drivers/usb/serial/xr_serial.c | 25 -------------------------
> 1 file changed, 25 deletions(-)
>
> diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
> index 483d07dee19d..0ca04906da4b 100644
> --- a/drivers/usb/serial/xr_serial.c
> +++ b/drivers/usb/serial/xr_serial.c
> @@ -545,37 +545,13 @@ static void xr_close(struct usb_serial_port *port)
>
> static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
> {
> - struct usb_driver *driver = serial->type->usb_driver;
> - struct usb_interface *control_interface;
> - int ret;
> -
> /* Don't bind to control interface */
> if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
> return -ENODEV;
>
> - /* But claim the control interface during data interface probe */
> - control_interface = usb_ifnum_to_if(serial->dev, 0);
> - if (!control_interface)
> - return -ENODEV;
> -
> - ret = usb_driver_claim_interface(driver, control_interface, NULL);
> - if (ret) {
> - dev_err(&serial->interface->dev, "Failed to claim control interface\n");
> - return ret;
> - }
> -
> return 0;
> }
>
> -static void xr_disconnect(struct usb_serial *serial)
> -{
> - struct usb_driver *driver = serial->type->usb_driver;
> - struct usb_interface *control_interface;
> -
> - control_interface = usb_ifnum_to_if(serial->dev, 0);
> - usb_driver_release_interface(driver, control_interface);
> -}
> -
> static const struct usb_device_id id_table[] = {
> { USB_DEVICE(0x04e2, 0x1410) }, /* XR21V141X */
> { }
> @@ -590,7 +566,6 @@ static struct usb_serial_driver xr_device = {
> .id_table = id_table,
> .num_ports = 1,
> .probe = xr_probe,
> - .disconnect = xr_disconnect,
> .open = xr_open,
> .close = xr_close,
> .break_ctl = xr_break_ctl,
Thanks,
Mauro
On Fri, Feb 26, 2021 at 11:08:26AM +0100, Johan Hovold wrote:
> Claiming the sibling control interface is a bit more involved and
> specifically requires adding support to USB-serial core for managing
> either interface being unbound first, something which could otherwise
> lead to a NULL-pointer dereference.
>
> Similarly, additional infrastructure is also needed to handle suspend
> properly.
>
> Since the driver currently isn't actually using the control interface,
> we can defer this for now by simply not claiming the control interface.
>
> Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
> Reported-by: Mauro Carvalho Chehab <[email protected]>
> Cc: Manivannan Sadhasivam <[email protected]>
> Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Thanks,
Mani
> ---
> drivers/usb/serial/xr_serial.c | 25 -------------------------
> 1 file changed, 25 deletions(-)
>
> diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
> index 483d07dee19d..0ca04906da4b 100644
> --- a/drivers/usb/serial/xr_serial.c
> +++ b/drivers/usb/serial/xr_serial.c
> @@ -545,37 +545,13 @@ static void xr_close(struct usb_serial_port *port)
>
> static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
> {
> - struct usb_driver *driver = serial->type->usb_driver;
> - struct usb_interface *control_interface;
> - int ret;
> -
> /* Don't bind to control interface */
> if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
> return -ENODEV;
>
> - /* But claim the control interface during data interface probe */
> - control_interface = usb_ifnum_to_if(serial->dev, 0);
> - if (!control_interface)
> - return -ENODEV;
> -
> - ret = usb_driver_claim_interface(driver, control_interface, NULL);
> - if (ret) {
> - dev_err(&serial->interface->dev, "Failed to claim control interface\n");
> - return ret;
> - }
> -
> return 0;
> }
>
> -static void xr_disconnect(struct usb_serial *serial)
> -{
> - struct usb_driver *driver = serial->type->usb_driver;
> - struct usb_interface *control_interface;
> -
> - control_interface = usb_ifnum_to_if(serial->dev, 0);
> - usb_driver_release_interface(driver, control_interface);
> -}
> -
> static const struct usb_device_id id_table[] = {
> { USB_DEVICE(0x04e2, 0x1410) }, /* XR21V141X */
> { }
> @@ -590,7 +566,6 @@ static struct usb_serial_driver xr_device = {
> .id_table = id_table,
> .num_ports = 1,
> .probe = xr_probe,
> - .disconnect = xr_disconnect,
> .open = xr_open,
> .close = xr_close,
> .break_ctl = xr_break_ctl,
> --
> 2.26.2
>
On Fri, Feb 26, 2021 at 11:54:47AM +0100, Mauro Carvalho Chehab wrote:
> Em Fri, 26 Feb 2021 11:08:26 +0100
> Johan Hovold <[email protected]> escreveu:
>
> > Claiming the sibling control interface is a bit more involved and
> > specifically requires adding support to USB-serial core for managing
> > either interface being unbound first, something which could otherwise
> > lead to a NULL-pointer dereference.
> >
> > Similarly, additional infrastructure is also needed to handle suspend
> > properly.
> >
> > Since the driver currently isn't actually using the control interface,
> > we can defer this for now by simply not claiming the control interface.
> >
> > Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
> > Reported-by: Mauro Carvalho Chehab <[email protected]>
> > Cc: Manivannan Sadhasivam <[email protected]>
> > Signed-off-by: Johan Hovold <[email protected]>
>
> That solved the issue with XR21V1410:
>
> [ 8176.265862] usbcore: registered new interface driver xr_serial
> [ 8176.265885] usbserial: USB Serial support registered for xr_serial
> [ 8176.265921] xr_serial 2-1:1.1: xr_serial converter detected
> [ 8176.266041] usb 2-1: xr_serial converter now attached to ttyUSB0
> [ 8176.268023] printk: console [ttyUSB0] enabled
> [ 8186.512841] usb 2-1: USB disconnect, device number 5
> [ 8186.513131] printk: console [ttyUSB0] disabled
> [ 8186.513340] xr_serial ttyUSB0: xr_serial converter now disconnected from ttyUSB0
> [ 8186.513376] xr_serial 2-1:1.1: device disconnected
>
> Tested-by: Mauro Carvalho Chehab <[email protected]>
Thanks for testing, and thanks to Greg and Manivannan for the review.
Now applied.
Johan