Patch series for Engicam i.Core MX8M Mini SOM and it's associated
carrier board dts(i) support.
Changes for v4:
- rebase on linux-next
- fixed Krzysztof comments
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
- keep min/max regulator hoping
- collect Krzysztof r-b
- fix dt-bindings
Jagan Teki (5):
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
.../devicetree/bindings/arm/fsl.yaml | 8 +
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 97 ++++++++
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 97 ++++++++
.../dts/freescale/imx8mm-icore-mx8mm.dtsi | 232 ++++++++++++++++++
5 files changed, 436 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
--
2.25.1
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini
from Engicam.
General features:
- NXP i.MX8M Mini
- Up to 2GB LDDR4
- 8/16GB eMMC
- Gigabit Ethernet
- USB 2.0 Host/OTG
- PCIe Gen2 interface
- I2S
- MIPI DSI to LVDS
- rest of i.MX8M Mini features
i.Core MX8M Mini needs to mount on top of Engicam baseboards
for creating complete platform solutions.
Add support for it.
Signed-off-by: Matteo Lisi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
Changes for v4:
- collect r-b
Changes for v3:
- keep regulator min/max hoping
Changes for v2:
- updated commit message
- add cpu nodes
- add fec1 node
- fixed pmic tree comments
- dropped engicam from filename since it aligned with imx6 engicam
dts files naming conventions.
.../dts/freescale/imx8mm-icore-mx8mm.dtsi | 232 ++++++++++++++++++
1 file changed, 232 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
new file mode 100644
index 000000000000..b40148d728ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+ compatible = "engicam,icore-mx8mm", "fsl,imx8mm";
+};
+
+&A53_0 {
+ cpu-supply = <®_buck4>;
+};
+
+&A53_1 {
+ cpu-supply = <®_buck4>;
+};
+
+&A53_2 {
+ cpu-supply = <®_buck4>;
+};
+
+&A53_3 {
+ cpu-supply = <®_buck4>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "nxp,pf8121a";
+ reg = <0x08>;
+
+ regulators {
+ reg_ldo1: ldo1 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_ldo2: ldo2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_ldo3: ldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_ldo4: ldo4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck1: buck1 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck2: buck2 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck3: buck3 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck4: buck4 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck5: buck5 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck6: buck6 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_buck7: buck7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_vsnvs: vsnvs {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
--
2.25.1
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.
Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Matteo Lisi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- don't create carrier board dtsi, move changes in final dts.
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
Changes for v2:
- enabled fec1 node
- updated commit message
- dropped engicam from filename since it aligned with imx6 engicam
dts files naming conventions.
- add i2c nodes
- fixed v1 comments
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 97 +++++++++++++++++++
2 files changed, 98 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 6438db3822f8..3b5957ff1606 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
new file mode 100644
index 000000000000..5389d6f2beba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+ model = "Engicam i.Core MX8M Mini C.TOUCH 2.0";
+ compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
+ "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ no-1-8-v;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.25.1
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board from Engicam.
i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
Add bindings for it.
Signed-off-by: Jagan Teki <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes for v4:
- collect ack's
Changes for v3:
- fix dt-bindings
Changes for v2:
- update commit message
Documentation/devicetree/bindings/arm/fsl.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 949442d4f385..6d86a3a24983 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -690,7 +690,9 @@ properties:
- description: Engicam i.Core MX8M Mini SoM based boards
items:
- - const: engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+ - enum:
+ - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+ - engicam,icore-mx8mm-edimm2.2 # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
- const: engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SoM
- const: fsl,imx8mm
--
2.25.1
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
Add bindings for it.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes for v4:
- collect ack's
Changes for v3:
- add proper bindings
Changes for v2:
- updated commit message
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 297c87f45db8..949442d4f385 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -688,6 +688,12 @@ properties:
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- const: fsl,imx8mm
+ - description: Engicam i.Core MX8M Mini SoM based boards
+ items:
+ - const: engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+ - const: engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SoM
+ - const: fsl,imx8mm
+
- description: Kontron BL i.MX8MM (N801X S) Board
items:
- const: kontron,imx8mm-n801x-s
--
2.25.1
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
PCIe, DSI, CSI nodes will add it into imx8mm-engicam-edimm2.2.dtsi once
Mainline Linux supported.
Add support for it.
Signed-off-by: Matteo Lisi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- don't create carrier board dtsi, move changes in final dts.
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
Changes for v2:
- enabled fec1 node
- updated commit message
- dropped engicam from filename since it aligned with imx6 engicam
dts files naming conventions.
- add i2c nodes
- fixed v1 comments
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 97 +++++++++++++++++++
2 files changed, 98 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 3b5957ff1606..d68ffa77b761 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
new file mode 100644
index 000000000000..a4a2ada14835
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+ model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit";
+ compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm",
+ "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ no-1-8-v;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.25.1
On Fri, Feb 26, 2021 at 12:54:02AM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
>
> i.Core MX8M Mini needs to mount on top of this Carrier board for
> creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
>
> Add support for it.
>
> Signed-off-by: Matteo Lisi <[email protected]>
> Signed-off-by: Jagan Teki <[email protected]>
> ---
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
> + };
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +/* SD */
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
> + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> + max-frequency = <50000000>;
> + bus-width = <4>;
> + no-1-8-v;
> + pm-ignore-notify;
> + keep-power-in-suspend;
> + status = "okay";
> +};
> --
> 2.25.1
>
On Fri, Feb 26, 2021 at 12:54:03AM +0530, Jagan Teki wrote:
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
>
> EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
> Board from Engicam.
>
> i.Core MX8M Mini needs to mount on top of this Evaluation board for
> creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
>
> Add bindings for it.
>
> Signed-off-by: Jagan Teki <[email protected]>
> Acked-by: Rob Herring <[email protected]>
> ---
> Changes for v4:
> - collect ack's
> Changes for v3:
> - fix dt-bindings
> Changes for v2:
> - update commit message
>
> Documentation/devicetree/bindings/arm/fsl.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On Fri, Feb 26, 2021 at 12:53:59AM +0530, Jagan Teki wrote:
> Jagan Teki (5):
> dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
> arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
> arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
> dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
> arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
Applied all, thanks.