2021-03-04 06:14:38

by Stanimir Varbanov

[permalink] [raw]
Subject: [PATCH v2 1/2] v4l2-ctrl: Add decoder conceal color control

Add decoder v4l2 control to set conceal color.

Signed-off-by: Stanimir Varbanov <[email protected]>
---
.../media/v4l/ext-ctrls-codec.rst | 33 +++++++++++++++++++
drivers/media/v4l2-core/v4l2-ctrls.c | 9 +++++
include/uapi/linux/v4l2-controls.h | 1 +
3 files changed, 43 insertions(+)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 00944e97d638..817da8a14572 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -674,6 +674,39 @@ enum v4l2_mpeg_video_frame_skip_mode -
is currently displayed (decoded). This value is reset to 0 whenever
the decoder is started.

+``V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (integer64)``
+ This control sets conceal color in YUV color space. It describes the
+ client preference of error conceal color in case of error where
+ reference frame is missing. The decoder should fill the reference
+ buffer with preferred color and use it for future decoding. The control
+ is using 16bits per channel.
+ Applicable to decoders.
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * -
+ - 8bit format
+ - 10bit format
+ - 12bit format
+ * - Y luminance
+ - Bit 0:7
+ - Bit 0:9
+ - Bit 0:11
+ * - Cb chrominance
+ - Bit 16:23
+ - Bit 16:25
+ - Bit 16:27
+ * - Cr chrominance
+ - Bit 32:39
+ - Bit 32:41
+ - Bit 32:43
+ * - Must be zero
+ - Bit 48:63
+ - Bit 48:63
+ - Bit 48:63
+
``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)``
If enabled the decoder expects to receive a single slice per buffer,
otherwise the decoder expects a single frame in per buffer.
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 016cf6204cbb..a3b9d28a00b7 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -945,6 +945,7 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_MPEG_VIDEO_VBV_SIZE: return "VBV Buffer Size";
case V4L2_CID_MPEG_VIDEO_DEC_PTS: return "Video Decoder PTS";
case V4L2_CID_MPEG_VIDEO_DEC_FRAME: return "Video Decoder Frame Count";
+ case V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR: return "Video Decoder Conceal Color";
case V4L2_CID_MPEG_VIDEO_VBV_DELAY: return "Initial Delay for VBV Control";
case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: return "Horizontal MV Search Range";
case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: return "Vertical MV Search Range";
@@ -1430,6 +1431,14 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
*max = 0x7fffffffffffffffLL;
*step = 1;
break;
+ case V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR:
+ *type = V4L2_CTRL_TYPE_INTEGER64;
+ *min = 0;
+ /* default for 8bit black, luma is 16, chroma is 128 */
+ *def = 0x8000800010LL;
+ *max = 0xffffffffffffLL;
+ *step = 1;
+ break;
case V4L2_CID_PIXEL_RATE:
*type = V4L2_CTRL_TYPE_INTEGER64;
*flags |= V4L2_CTRL_FLAG_READ_ONLY;
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 039c0d7add1b..5e5a3068be2d 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -428,6 +428,7 @@ enum v4l2_mpeg_video_multi_slice_mode {
#define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228)
#define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229)
#define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230)
+#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+231)

/* CIDs for the MPEG-2 Part 2 (H.262) codec */
#define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270)
--
2.25.1


2021-03-16 15:38:59

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH v2 1/2] v4l2-ctrl: Add decoder conceal color control

On 02/03/2021 12:44, Stanimir Varbanov wrote:
> Add decoder v4l2 control to set conceal color.
>
> Signed-off-by: Stanimir Varbanov <[email protected]>
> ---
> .../media/v4l/ext-ctrls-codec.rst | 33 +++++++++++++++++++
> drivers/media/v4l2-core/v4l2-ctrls.c | 9 +++++
> include/uapi/linux/v4l2-controls.h | 1 +
> 3 files changed, 43 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index 00944e97d638..817da8a14572 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -674,6 +674,39 @@ enum v4l2_mpeg_video_frame_skip_mode -
> is currently displayed (decoded). This value is reset to 0 whenever
> the decoder is started.
>
> +``V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (integer64)``
> + This control sets conceal color in YUV color space. It describes the

conceal -> the conceal

> + client preference of error conceal color in case of error where

client preference of the error conceal color in case of an error where the

> + reference frame is missing. The decoder should fill the reference
> + buffer with preferred color and use it for future decoding. The control

with the

> + is using 16bits per channel.

16bits -> 16 bits

> + Applicable to decoders.
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * -
> + - 8bit format
> + - 10bit format
> + - 12bit format
> + * - Y luminance
> + - Bit 0:7
> + - Bit 0:9
> + - Bit 0:11
> + * - Cb chrominance
> + - Bit 16:23
> + - Bit 16:25
> + - Bit 16:27
> + * - Cr chrominance
> + - Bit 32:39
> + - Bit 32:41
> + - Bit 32:43
> + * - Must be zero
> + - Bit 48:63
> + - Bit 48:63
> + - Bit 48:63
> +
> ``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)``
> If enabled the decoder expects to receive a single slice per buffer,
> otherwise the decoder expects a single frame in per buffer.
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> index 016cf6204cbb..a3b9d28a00b7 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -945,6 +945,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> case V4L2_CID_MPEG_VIDEO_VBV_SIZE: return "VBV Buffer Size";
> case V4L2_CID_MPEG_VIDEO_DEC_PTS: return "Video Decoder PTS";
> case V4L2_CID_MPEG_VIDEO_DEC_FRAME: return "Video Decoder Frame Count";
> + case V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR: return "Video Decoder Conceal Color";
> case V4L2_CID_MPEG_VIDEO_VBV_DELAY: return "Initial Delay for VBV Control";
> case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: return "Horizontal MV Search Range";
> case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: return "Vertical MV Search Range";
> @@ -1430,6 +1431,14 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> *max = 0x7fffffffffffffffLL;
> *step = 1;
> break;
> + case V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR:
> + *type = V4L2_CTRL_TYPE_INTEGER64;
> + *min = 0;
> + /* default for 8bit black, luma is 16, chroma is 128 */

8bit -> 8 bit

> + *def = 0x8000800010LL;
> + *max = 0xffffffffffffLL;
> + *step = 1;
> + break;
> case V4L2_CID_PIXEL_RATE:
> *type = V4L2_CTRL_TYPE_INTEGER64;
> *flags |= V4L2_CTRL_FLAG_READ_ONLY;
> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> index 039c0d7add1b..5e5a3068be2d 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -428,6 +428,7 @@ enum v4l2_mpeg_video_multi_slice_mode {
> #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228)
> #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229)
> #define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230)
> +#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+231)
>
> /* CIDs for the MPEG-2 Part 2 (H.262) codec */
> #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270)
>

After fixing the typos:

Reviewed-by: Hans Verkuil <[email protected]>

Regards,

Hans