First of all, I've based this on the patches sent by Jonas Gorski back in
2016:
https://www.spinics.net/lists/linux-gpio/msg15983.html
http://patchwork.ozlabs.org/project/linux-gpio/patch/[email protected]/
I've tried to address all coments from Linus Walleij, but I know that
this may still need some other modifications
This patchset adds appropriate binding documentation and drivers for
pin controller cores found in the BCM63XX MIPS SoCs currently supported.
While the GPIO part is always the same, the pinmux part varies quite a
lot between different SoCs. Sometimes they have defined groups which
can be muxed into different functions, sometimes each function has a
different group. Sometimes you can mux individual pins. Often it is a
combination of single pins and groups.
Some core versions require the GPIO direction to be set according to the
function, most do not. Sometimes the mux register(s) contain bits for
unrelated other functions.
v4: fix gpiochip_irqchip_add_domain(), remove IRQ Kconfig selections and add
missing of_node_put().
v3: introduce new files for shared code and add more changes suggested by
Linus Walleij. Also add a new patch needed for properly parsing gpio-ranges.
v2: introduce changes suggested by Linus Walleij and remove interrupts
- In order to use GPIO_REGMAP, the need to get gpio_chip from gpio_regmap
and use it for pinctrl_add_gpio_range() and gpio_chip.direction_input()
and gpio_chip.direction_output().
Álvaro Fernández Rojas (15):
gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
gpio: regmap: set gpio_chip of_node
pinctrl: bcm: add bcm63xx base code
Documentation: add BCM6328 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6328
Documentation: add BCM6358 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6358
Documentation: add BCM6362 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6362
Documentation: add BCM6368 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6368
Documentation: add BCM63268 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM63268
Documentation: add BCM6318 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6318
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 187 +++++
.../pinctrl/brcm,bcm63268-pinctrl.yaml | 208 ++++++
.../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 +++++
.../pinctrl/brcm,bcm6358-pinctrl.yaml | 137 ++++
.../pinctrl/brcm,bcm6362-pinctrl.yaml | 250 +++++++
.../pinctrl/brcm,bcm6368-pinctrl.yaml | 261 +++++++
drivers/gpio/gpio-regmap.c | 1 +
drivers/pinctrl/bcm/Kconfig | 55 ++
drivers/pinctrl/bcm/Makefile | 7 +
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 496 ++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63268.c | 643 ++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6328.c | 403 +++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6358.c | 369 ++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6362.c | 617 +++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 114 ++++
drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 46 ++
include/linux/gpio/driver.h | 9 +
include/linux/gpio/regmap.h | 3 +
19 files changed, 4500 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h
--
2.20.1
Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
to different functions. BCM6318 is similar to BCM6328 with the addition
of a pad register, and the GPIO meaning of the mux register changes
based on the GPIO number.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Signed-off-by: Jonas Gorski <[email protected]>
---
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 496 ++++++++++++++++++++++++++
3 files changed, 505 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 186985846120..33660e8fec05 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
select PINCONF
select PINMUX
+config PINCTRL_BCM6318
+ bool "Broadcom BCM6318 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6318 GPIO driver.
+
config PINCTRL_BCM6328
bool "Broadcom BCM6328 GPIO driver"
depends on (BMIPS_GENERIC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 4117847fd279..00c7b7775e63 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6318.c b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
new file mode 100644
index 000000000000..57fa64180df1
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <[email protected]>
+ * Copyright (C) 2016 Jonas Gorski <[email protected]>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6318_NUM_GPIOS 50
+#define BCM6318_NUM_MUX 48
+
+#define BCM6318_MODE_REG 0x18
+#define BCM6318_MUX_REG 0x1c
+#define BCM6318_PAD_REG 0x54
+
+struct bcm6318_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6318_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned mode_val:1;
+ unsigned mux_val:2;
+};
+
+static const struct pinctrl_pin_desc bcm6318_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+ PINCTRL_PIN(48, "gpio48"),
+ PINCTRL_PIN(49, "gpio49"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+static unsigned gpio48_pins[] = { 48 };
+static unsigned gpio49_pins[] = { 49 };
+
+#define BCM6318_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6318_pingroup bcm6318_groups[] = {
+ BCM6318_GROUP(gpio0),
+ BCM6318_GROUP(gpio1),
+ BCM6318_GROUP(gpio2),
+ BCM6318_GROUP(gpio3),
+ BCM6318_GROUP(gpio4),
+ BCM6318_GROUP(gpio5),
+ BCM6318_GROUP(gpio6),
+ BCM6318_GROUP(gpio7),
+ BCM6318_GROUP(gpio8),
+ BCM6318_GROUP(gpio9),
+ BCM6318_GROUP(gpio10),
+ BCM6318_GROUP(gpio11),
+ BCM6318_GROUP(gpio12),
+ BCM6318_GROUP(gpio13),
+ BCM6318_GROUP(gpio14),
+ BCM6318_GROUP(gpio15),
+ BCM6318_GROUP(gpio16),
+ BCM6318_GROUP(gpio17),
+ BCM6318_GROUP(gpio18),
+ BCM6318_GROUP(gpio19),
+ BCM6318_GROUP(gpio20),
+ BCM6318_GROUP(gpio21),
+ BCM6318_GROUP(gpio22),
+ BCM6318_GROUP(gpio23),
+ BCM6318_GROUP(gpio24),
+ BCM6318_GROUP(gpio25),
+ BCM6318_GROUP(gpio26),
+ BCM6318_GROUP(gpio27),
+ BCM6318_GROUP(gpio28),
+ BCM6318_GROUP(gpio29),
+ BCM6318_GROUP(gpio30),
+ BCM6318_GROUP(gpio31),
+ BCM6318_GROUP(gpio32),
+ BCM6318_GROUP(gpio33),
+ BCM6318_GROUP(gpio34),
+ BCM6318_GROUP(gpio35),
+ BCM6318_GROUP(gpio36),
+ BCM6318_GROUP(gpio37),
+ BCM6318_GROUP(gpio38),
+ BCM6318_GROUP(gpio39),
+ BCM6318_GROUP(gpio40),
+ BCM6318_GROUP(gpio41),
+ BCM6318_GROUP(gpio42),
+ BCM6318_GROUP(gpio43),
+ BCM6318_GROUP(gpio44),
+ BCM6318_GROUP(gpio45),
+ BCM6318_GROUP(gpio46),
+ BCM6318_GROUP(gpio47),
+ BCM6318_GROUP(gpio48),
+ BCM6318_GROUP(gpio49),
+};
+
+/* GPIO_MODE */
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+/* PINMUX_SEL */
+static const char * const ephy0_spd_led_groups[] = {
+ "gpio0",
+};
+
+static const char * const ephy1_spd_led_groups[] = {
+ "gpio1",
+};
+
+static const char * const ephy2_spd_led_groups[] = {
+ "gpio2",
+};
+
+static const char * const ephy3_spd_led_groups[] = {
+ "gpio3",
+};
+
+static const char * const ephy0_act_led_groups[] = {
+ "gpio4",
+};
+
+static const char * const ephy1_act_led_groups[] = {
+ "gpio5",
+};
+
+static const char * const ephy2_act_led_groups[] = {
+ "gpio6",
+};
+
+static const char * const ephy3_act_led_groups[] = {
+ "gpio7",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio6",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_act_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const inet_fail_led_groups[] = {
+ "gpio9",
+};
+
+static const char * const dsl_led_groups[] = {
+ "gpio10",
+};
+
+static const char * const post_fail_led_groups[] = {
+ "gpio11",
+};
+
+static const char * const wlan_wps_led_groups[] = {
+ "gpio12",
+};
+
+static const char * const usb_pwron_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_active_groups[] = {
+ "gpio40",
+};
+
+#define BCM6318_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mode_val = 1, \
+ }
+
+#define BCM6318_MUX_FUN(n, mux) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mux_val = mux, \
+ }
+
+static const struct bcm6318_function bcm6318_funcs[] = {
+ BCM6318_MODE_FUN(led),
+ BCM6318_MUX_FUN(ephy0_spd_led, 1),
+ BCM6318_MUX_FUN(ephy1_spd_led, 1),
+ BCM6318_MUX_FUN(ephy2_spd_led, 1),
+ BCM6318_MUX_FUN(ephy3_spd_led, 1),
+ BCM6318_MUX_FUN(ephy0_act_led, 1),
+ BCM6318_MUX_FUN(ephy1_act_led, 1),
+ BCM6318_MUX_FUN(ephy2_act_led, 1),
+ BCM6318_MUX_FUN(ephy3_act_led, 1),
+ BCM6318_MUX_FUN(serial_led_data, 3),
+ BCM6318_MUX_FUN(serial_led_clk, 3),
+ BCM6318_MUX_FUN(inet_act_led, 1),
+ BCM6318_MUX_FUN(inet_fail_led, 1),
+ BCM6318_MUX_FUN(dsl_led, 1),
+ BCM6318_MUX_FUN(post_fail_led, 1),
+ BCM6318_MUX_FUN(wlan_wps_led, 1),
+ BCM6318_MUX_FUN(usb_pwron, 1),
+ BCM6318_MUX_FUN(usb_device_led, 2),
+ BCM6318_MUX_FUN(usb_active, 2),
+};
+
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
+{
+ return BCM6318_MUX_REG + (pin / 16) * 4;
+}
+
+static inline unsigned int bcm6318_pad_off(unsigned int pin)
+{
+ return BCM6318_PAD_REG + (pin / 8) * 4;
+}
+
+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6318_groups);
+}
+
+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6318_groups[group].name;
+}
+
+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6318_groups[group].pins;
+ *num_pins = bcm6318_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6318_funcs);
+}
+
+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6318_funcs[selector].name;
+}
+
+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6318_funcs[selector].groups;
+ *num_groups = bcm6318_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static inline void bcm6318_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
+ unsigned int mode, unsigned int mux)
+{
+ if (pin < BCM63XX_BANK_GPIOS)
+ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin),
+ mode ? BIT(pin) : 0);
+
+ if (pin < BCM6318_NUM_MUX)
+ regmap_update_bits(pc->regs,
+ bcm6318_mux_off(pin),
+ 3UL << ((pin % 16) * 2),
+ mux << ((pin % 16) * 2));
+}
+
+static inline void bcm6318_set_pad(struct bcm63xx_pinctrl *pc, unsigned pin,
+ uint8_t val)
+{
+ regmap_update_bits(pc->regs, bcm6318_pad_off(pin),
+ 0xfUL << ((pin % 8) * 4),
+ val << ((pin % 8) * 4));
+}
+
+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6318_pingroup *pg = &bcm6318_groups[group];
+ const struct bcm6318_function *f = &bcm6318_funcs[selector];
+
+ bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val);
+
+ return 0;
+}
+
+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ if (offset < 13) {
+ /* GPIOs 0-12 use mux 0 as GPIO function */
+ bcm6318_rmw_mux(pc, offset, 0, 0);
+ } else if (offset < 42) {
+ /* GPIOs 13-41 use mux 3 as GPIO function */
+ bcm6318_rmw_mux(pc, offset, 0, 3);
+
+ bcm6318_set_pad(pc, offset, 0);
+ }
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6318_pctl_ops = {
+ .get_groups_count = bcm6318_pinctrl_get_group_count,
+ .get_group_name = bcm6318_pinctrl_get_group_name,
+ .get_group_pins = bcm6318_pinctrl_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinctrl_utils_free_map,
+};
+
+static struct pinmux_ops bcm6318_pmx_ops = {
+ .get_functions_count = bcm6318_pinctrl_get_func_count,
+ .get_function_name = bcm6318_pinctrl_get_func_name,
+ .get_function_groups = bcm6318_pinctrl_get_groups,
+ .set_mux = bcm6318_pinctrl_set_mux,
+ .gpio_request_enable = bcm6318_gpio_request_enable,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6318_soc = {
+ .ngpios = BCM6318_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6318_pins),
+ .pctl_ops = &bcm6318_pctl_ops,
+ .pins = bcm6318_pins,
+ .pmx_ops = &bcm6318_pmx_ops,
+};
+
+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6318_soc, NULL);
+}
+
+static const struct of_device_id bcm6318_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6318-pinctrl", },
+ { },
+};
+
+static struct platform_driver bcm6318_pinctrl_driver = {
+ .probe = bcm6318_pinctrl_probe,
+ .driver = {
+ .name = "bcm6318-pinctrl",
+ .of_match_table = bcm6318_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6318_pinctrl_driver);
--
2.20.1