ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- fixed Laurent comments
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated to new dt-bindings style
.../display/bridge/chipone,icn6211.yaml | 99 +++++++++++++++++++
MAINTAINERS | 5 +
2 files changed, 104 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 000000000000..62c3bd4cb28d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+ - Jagan Teki <[email protected]>
+
+description: |
+ ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+ It has a flexible configuration of MIPI DSI signal input and
+ produce RGB565, RGB666, RGB888 output format.
+
+properties:
+ compatible:
+ enum:
+ - chipone,icn6211
+
+ reg:
+ maxItems: 1
+ description: virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: Bridge EN pin, chip is reset when EN is low.
+
+ vdd1-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+ vdd2-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+ vdd3-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DSI input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DPI output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ compatible = "chipone,icn6211";
+ reg = <0>;
+ enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in_dsi: endpoint {
+ remote-endpoint = <&dsi_out_bridge>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d241b832aae..065cbdc889d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5529,6 +5529,11 @@ S: Maintained
F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
F: drivers/gpu/drm/panel/panel-boe-himax8279d.c
+DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
+M: Jagan Teki <[email protected]>
+S: Maintained
+F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+
DRM DRIVER FOR FARADAY TVE200 TV ENCODER
M: Linus Walleij <[email protected]>
S: Maintained
--
2.25.1
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated the driver to inline with new drm bridge style
MAINTAINERS | 1 +
drivers/gpu/drm/bridge/Kconfig | 13 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++
4 files changed, 308 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 065cbdc889d3..9c59402e51bc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5533,6 +5533,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
M: Jagan Teki <[email protected]>
S: Maintained
F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+F: drivers/gpu/drm/bridge/chipone-icn6211.c
DRM DRIVER FOR FARADAY TVE200 TV ENCODER
M: Linus Walleij <[email protected]>
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index e4110d6ca7b3..330ee70ed746 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -27,6 +27,19 @@ config DRM_CDNS_DSI
Support Cadence DPI to DSI bridge. This is an internal
bridge and is meant to be directly embedded in a SoC.
+config DRM_CHIPONE_ICN6211
+ tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
+ depends on OF
+ select DRM_MIPI_DSI
+ select DRM_PANEL_BRIDGE
+ help
+ ICN6211 is MIPI-DSI/RGB Converter bridge from chipone.
+
+ It has a flexible configuration of MIPI DSI signal input
+ and produce RGB565, RGB666, RGB888 output format.
+
+ If in doubt, say "N".
+
config DRM_CHRONTEL_CH7033
tristate "Chrontel CH7033 Video Encoder"
depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 86e7acc76f8d..3eb84b638988 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
+obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
new file mode 100644
index 000000000000..a6151db95586
--- /dev/null
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <[email protected]>
+ */
+
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#define HACTIVE_LI 0x20
+#define VACTIVE_LI 0x21
+#define VACTIVE_HACTIVE_HI 0x22
+#define HFP_LI 0x23
+#define HSYNC_LI 0x24
+#define HBP_LI 0x25
+#define HFP_HSW_HBP_HI 0x26
+#define VFP 0x27
+#define VSYNC 0x28
+#define VBP 0x29
+
+struct chipone {
+ struct device *dev;
+ struct drm_bridge bridge;
+ struct drm_bridge *panel_bridge;
+ struct gpio_desc *enable_gpio;
+ struct regulator *vdd1;
+ struct regulator *vdd2;
+ struct regulator *vdd3;
+};
+
+static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct chipone, bridge);
+}
+
+static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge)
+{
+ return &bridge->encoder->crtc->state->adjusted_mode;
+}
+
+static inline int chipone_dsi_write(struct chipone *icn, const void *seq,
+ size_t len)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev);
+
+ return mipi_dsi_generic_write(dsi, seq, len);
+}
+
+#define ICN6211_DSI(icn, seq...) \
+ { \
+ const u8 d[] = { seq }; \
+ chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \
+ }
+
+static void chipone_enable(struct drm_bridge *bridge)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+ struct drm_display_mode *mode = bridge_to_mode(bridge);
+
+ ICN6211_DSI(icn, 0x7a, 0xc1);
+
+ ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff);
+
+ ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff);
+
+ /**
+ * lsb nibble: 2nd nibble of hdisplay
+ * msb nibble: 2nd nibble of vdisplay
+ */
+ ICN6211_DSI(icn, VACTIVE_HACTIVE_HI,
+ ((mode->hdisplay >> 8) & 0xf) |
+ (((mode->vdisplay >> 8) & 0xf) << 4));
+
+ ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay);
+
+ ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start);
+
+ ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end);
+
+ ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00);
+
+ ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay);
+
+ ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start);
+
+ ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end);
+
+ /* dsi specific sequence */
+ ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80);
+ ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28);
+ ICN6211_DSI(icn, 0xb5, 0xa0);
+ ICN6211_DSI(icn, 0x5c, 0xff);
+ ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01);
+ ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92);
+ ICN6211_DSI(icn, 0x6b, 0x71);
+ ICN6211_DSI(icn, 0x69, 0x2b);
+ ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40);
+ ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98);
+
+ /* icn6211 specific sequence */
+ ICN6211_DSI(icn, 0xb6, 0x20);
+ ICN6211_DSI(icn, 0x51, 0x20);
+ ICN6211_DSI(icn, 0x09, 0x10);
+
+ usleep_range(10000, 11000);
+}
+
+static void chipone_pre_enable(struct drm_bridge *bridge)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+ int ret;
+
+ if (icn->vdd1) {
+ ret = regulator_enable(icn->vdd1);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD1 regulator: %d\n", ret);
+ }
+
+ if (icn->vdd2) {
+ ret = regulator_enable(icn->vdd2);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD2 regulator: %d\n", ret);
+ }
+
+ if (icn->vdd3) {
+ ret = regulator_enable(icn->vdd3);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD3 regulator: %d\n", ret);
+ }
+
+ gpiod_set_value(icn->enable_gpio, 1);
+
+ usleep_range(10000, 11000);
+}
+
+static void chipone_post_disable(struct drm_bridge *bridge)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ if (icn->vdd1)
+ regulator_disable(icn->vdd1);
+
+ if (icn->vdd2)
+ regulator_disable(icn->vdd2);
+
+ if (icn->vdd3)
+ regulator_disable(icn->vdd3);
+
+ gpiod_set_value(icn->enable_gpio, 0);
+}
+
+static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags);
+}
+
+static const struct drm_bridge_funcs chipone_bridge_funcs = {
+ .attach = chipone_attach,
+ .post_disable = chipone_post_disable,
+ .pre_enable = chipone_pre_enable,
+ .enable = chipone_enable,
+};
+
+static int chipone_parse_dt(struct chipone *icn)
+{
+ struct device *dev = icn->dev;
+ struct drm_panel *panel;
+ int ret;
+
+ icn->vdd1 = devm_regulator_get_optional(dev, "vdd1");
+ if (IS_ERR(icn->vdd1)) {
+ ret = PTR_ERR(icn->vdd1);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd1 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret);
+ }
+
+ icn->vdd2 = devm_regulator_get_optional(dev, "vdd2");
+ if (IS_ERR(icn->vdd2)) {
+ ret = PTR_ERR(icn->vdd2);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd2 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret);
+ }
+
+ icn->vdd3 = devm_regulator_get_optional(dev, "vdd3");
+ if (IS_ERR(icn->vdd3)) {
+ ret = PTR_ERR(icn->vdd3);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd3 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret);
+ }
+
+ icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(icn->enable_gpio)) {
+ DRM_DEV_ERROR(dev, "failed to get enable GPIO\n");
+ return PTR_ERR(icn->enable_gpio);
+ }
+
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+ if (ret)
+ return ret;
+
+ icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+ if (IS_ERR(icn->panel_bridge))
+ return PTR_ERR(icn->panel_bridge);
+
+ return 0;
+}
+
+static int chipone_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct chipone *icn;
+ int ret;
+
+ icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL);
+ if (!icn)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, icn);
+ icn->dev = dev;
+
+ ret = chipone_parse_dt(icn);
+ if (ret)
+ return ret;
+
+ icn->bridge.funcs = &chipone_bridge_funcs;
+ icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
+ icn->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&icn->bridge);
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_bridge_remove(&icn->bridge);
+ dev_err(dev, "failed to attach dsi\n");
+ }
+
+ return ret;
+}
+
+static int chipone_remove(struct mipi_dsi_device *dsi)
+{
+ struct chipone *icn = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_bridge_remove(&icn->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id chipone_of_match[] = {
+ { .compatible = "chipone,icn6211", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, chipone_of_match);
+
+static struct mipi_dsi_driver chipone_driver = {
+ .probe = chipone_probe,
+ .remove = chipone_remove,
+ .driver = {
+ .name = "chipone-icn6211",
+ .owner = THIS_MODULE,
+ .of_match_table = chipone_of_match,
+ },
+};
+module_mipi_dsi_driver(chipone_driver);
+
+MODULE_AUTHOR("Jagan Teki <[email protected]>");
+MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge");
+MODULE_LICENSE("GPL");
--
2.25.1
Hey Jagan,
This looks good to me, feel free to add my r-b.
Reviewed-by: Robert Foss <[email protected]>
On Thu, 4 Mar 2021 at 10:21, Jagan Teki <[email protected]> wrote:
>
> ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
>
> It has a flexible configuration of MIPI DSI signal input and
> produces RGB565, RGB666, RGB888 output format.
>
> Add dt-bingings for it.
>
> Signed-off-by: Jagan Teki <[email protected]>
> ---
> Changes for v4:
> - fixed Laurent comments
> - added regulators
> - replace reset with EN
> - fixed warnings pointed by Robert
> Changes for v3:
> - updated to new dt-bindings style
>
> .../display/bridge/chipone,icn6211.yaml | 99 +++++++++++++++++++
> MAINTAINERS | 5 +
> 2 files changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> new file mode 100644
> index 000000000000..62c3bd4cb28d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> +
> +maintainers:
> + - Jagan Teki <[email protected]>
> +
> +description: |
> + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
> +
> + It has a flexible configuration of MIPI DSI signal input and
> + produce RGB565, RGB666, RGB888 output format.
> +
> +properties:
> + compatible:
> + enum:
> + - chipone,icn6211
> +
> + reg:
> + maxItems: 1
> + description: virtual channel number of a DSI peripheral
> +
> + enable-gpios:
> + description: Bridge EN pin, chip is reset when EN is low.
> +
> + vdd1-supply:
> + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
> +
> + vdd2-supply:
> + description: A 1.8V/2.5V/3.3V supply that power the PLL.
> +
> + vdd3-supply:
> + description: A 1.8V/2.5V/3.3V supply that power the RGB output.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Video port for MIPI DSI input
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Video port for MIPI DPI output (panel or connector).
> +
> + required:
> + - port@0
> + - port@1
> +
> +required:
> + - compatible
> + - reg
> + - enable-gpios
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + dsi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bridge@0 {
> + compatible = "chipone,icn6211";
> + reg = <0>;
> + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + bridge_in_dsi: endpoint {
> + remote-endpoint = <&dsi_out_bridge>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + bridge_out_panel: endpoint {
> + remote-endpoint = <&panel_out_bridge>;
> + };
> + };
> + };
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9d241b832aae..065cbdc889d3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5529,6 +5529,11 @@ S: Maintained
> F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
> F: drivers/gpu/drm/panel/panel-boe-himax8279d.c
>
> +DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
> +M: Jagan Teki <[email protected]>
> +S: Maintained
> +F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> +
> DRM DRIVER FOR FARADAY TVE200 TV ENCODER
> M: Linus Walleij <[email protected]>
> S: Maintained
> --
> 2.25.1
>
Hey Jagan,
This patch also looks good to me.
Reviewed-by: Robert Foss <[email protected]>
On Thu, 4 Mar 2021 at 10:22, Jagan Teki <[email protected]> wrote:
>
> ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
>
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
>
> Add bridge driver for it.
>
> Signed-off-by: Jagan Teki <[email protected]>
> ---
> Changes for v4:
> - added regulators
> - replace reset with EN
> - fixed warnings pointed by Robert
> Changes for v3:
> - updated the driver to inline with new drm bridge style
>
> MAINTAINERS | 1 +
> drivers/gpu/drm/bridge/Kconfig | 13 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++
> 4 files changed, 308 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 065cbdc889d3..9c59402e51bc 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5533,6 +5533,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
> M: Jagan Teki <[email protected]>
> S: Maintained
> F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> +F: drivers/gpu/drm/bridge/chipone-icn6211.c
>
> DRM DRIVER FOR FARADAY TVE200 TV ENCODER
> M: Linus Walleij <[email protected]>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index e4110d6ca7b3..330ee70ed746 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -27,6 +27,19 @@ config DRM_CDNS_DSI
> Support Cadence DPI to DSI bridge. This is an internal
> bridge and is meant to be directly embedded in a SoC.
>
> +config DRM_CHIPONE_ICN6211
> + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
> + depends on OF
> + select DRM_MIPI_DSI
> + select DRM_PANEL_BRIDGE
> + help
> + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone.
> +
> + It has a flexible configuration of MIPI DSI signal input
> + and produce RGB565, RGB666, RGB888 output format.
> +
> + If in doubt, say "N".
> +
> config DRM_CHRONTEL_CH7033
> tristate "Chrontel CH7033 Video Encoder"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 86e7acc76f8d..3eb84b638988 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
> +obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
> obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
> obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
> diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
> new file mode 100644
> index 000000000000..a6151db95586
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
> @@ -0,0 +1,293 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2020 Amarula Solutions(India)
> + * Author: Jagan Teki <[email protected]>
> + */
> +
> +#include <drm/drm_of.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_mipi_dsi.h>
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#define HACTIVE_LI 0x20
> +#define VACTIVE_LI 0x21
> +#define VACTIVE_HACTIVE_HI 0x22
> +#define HFP_LI 0x23
> +#define HSYNC_LI 0x24
> +#define HBP_LI 0x25
> +#define HFP_HSW_HBP_HI 0x26
> +#define VFP 0x27
> +#define VSYNC 0x28
> +#define VBP 0x29
> +
> +struct chipone {
> + struct device *dev;
> + struct drm_bridge bridge;
> + struct drm_bridge *panel_bridge;
> + struct gpio_desc *enable_gpio;
> + struct regulator *vdd1;
> + struct regulator *vdd2;
> + struct regulator *vdd3;
> +};
> +
> +static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct chipone, bridge);
> +}
> +
> +static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge)
> +{
> + return &bridge->encoder->crtc->state->adjusted_mode;
> +}
> +
> +static inline int chipone_dsi_write(struct chipone *icn, const void *seq,
> + size_t len)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev);
> +
> + return mipi_dsi_generic_write(dsi, seq, len);
> +}
> +
> +#define ICN6211_DSI(icn, seq...) \
> + { \
> + const u8 d[] = { seq }; \
> + chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \
> + }
> +
> +static void chipone_enable(struct drm_bridge *bridge)
> +{
> + struct chipone *icn = bridge_to_chipone(bridge);
> + struct drm_display_mode *mode = bridge_to_mode(bridge);
> +
> + ICN6211_DSI(icn, 0x7a, 0xc1);
> +
> + ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff);
> +
> + ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff);
> +
> + /**
> + * lsb nibble: 2nd nibble of hdisplay
> + * msb nibble: 2nd nibble of vdisplay
> + */
> + ICN6211_DSI(icn, VACTIVE_HACTIVE_HI,
> + ((mode->hdisplay >> 8) & 0xf) |
> + (((mode->vdisplay >> 8) & 0xf) << 4));
> +
> + ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay);
> +
> + ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start);
> +
> + ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end);
> +
> + ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00);
> +
> + ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay);
> +
> + ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start);
> +
> + ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end);
> +
> + /* dsi specific sequence */
> + ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80);
> + ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28);
> + ICN6211_DSI(icn, 0xb5, 0xa0);
> + ICN6211_DSI(icn, 0x5c, 0xff);
> + ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01);
> + ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92);
> + ICN6211_DSI(icn, 0x6b, 0x71);
> + ICN6211_DSI(icn, 0x69, 0x2b);
> + ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40);
> + ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98);
> +
> + /* icn6211 specific sequence */
> + ICN6211_DSI(icn, 0xb6, 0x20);
> + ICN6211_DSI(icn, 0x51, 0x20);
> + ICN6211_DSI(icn, 0x09, 0x10);
> +
> + usleep_range(10000, 11000);
> +}
> +
> +static void chipone_pre_enable(struct drm_bridge *bridge)
> +{
> + struct chipone *icn = bridge_to_chipone(bridge);
> + int ret;
> +
> + if (icn->vdd1) {
> + ret = regulator_enable(icn->vdd1);
> + if (ret)
> + DRM_DEV_ERROR(icn->dev,
> + "failed to enable VDD1 regulator: %d\n", ret);
> + }
> +
> + if (icn->vdd2) {
> + ret = regulator_enable(icn->vdd2);
> + if (ret)
> + DRM_DEV_ERROR(icn->dev,
> + "failed to enable VDD2 regulator: %d\n", ret);
> + }
> +
> + if (icn->vdd3) {
> + ret = regulator_enable(icn->vdd3);
> + if (ret)
> + DRM_DEV_ERROR(icn->dev,
> + "failed to enable VDD3 regulator: %d\n", ret);
> + }
> +
> + gpiod_set_value(icn->enable_gpio, 1);
> +
> + usleep_range(10000, 11000);
> +}
> +
> +static void chipone_post_disable(struct drm_bridge *bridge)
> +{
> + struct chipone *icn = bridge_to_chipone(bridge);
> +
> + if (icn->vdd1)
> + regulator_disable(icn->vdd1);
> +
> + if (icn->vdd2)
> + regulator_disable(icn->vdd2);
> +
> + if (icn->vdd3)
> + regulator_disable(icn->vdd3);
> +
> + gpiod_set_value(icn->enable_gpio, 0);
> +}
> +
> +static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
> +{
> + struct chipone *icn = bridge_to_chipone(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags);
> +}
> +
> +static const struct drm_bridge_funcs chipone_bridge_funcs = {
> + .attach = chipone_attach,
> + .post_disable = chipone_post_disable,
> + .pre_enable = chipone_pre_enable,
> + .enable = chipone_enable,
> +};
> +
> +static int chipone_parse_dt(struct chipone *icn)
> +{
> + struct device *dev = icn->dev;
> + struct drm_panel *panel;
> + int ret;
> +
> + icn->vdd1 = devm_regulator_get_optional(dev, "vdd1");
> + if (IS_ERR(icn->vdd1)) {
> + ret = PTR_ERR(icn->vdd1);
> + if (ret == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + icn->vdd1 = NULL;
> + DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret);
> + }
> +
> + icn->vdd2 = devm_regulator_get_optional(dev, "vdd2");
> + if (IS_ERR(icn->vdd2)) {
> + ret = PTR_ERR(icn->vdd2);
> + if (ret == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + icn->vdd2 = NULL;
> + DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret);
> + }
> +
> + icn->vdd3 = devm_regulator_get_optional(dev, "vdd3");
> + if (IS_ERR(icn->vdd3)) {
> + ret = PTR_ERR(icn->vdd3);
> + if (ret == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + icn->vdd3 = NULL;
> + DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret);
> + }
> +
> + icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(icn->enable_gpio)) {
> + DRM_DEV_ERROR(dev, "failed to get enable GPIO\n");
> + return PTR_ERR(icn->enable_gpio);
> + }
> +
> + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
> + if (ret)
> + return ret;
> +
> + icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> + if (IS_ERR(icn->panel_bridge))
> + return PTR_ERR(icn->panel_bridge);
> +
> + return 0;
> +}
> +
> +static int chipone_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct chipone *icn;
> + int ret;
> +
> + icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL);
> + if (!icn)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, icn);
> + icn->dev = dev;
> +
> + ret = chipone_parse_dt(icn);
> + if (ret)
> + return ret;
> +
> + icn->bridge.funcs = &chipone_bridge_funcs;
> + icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
> + icn->bridge.of_node = dev->of_node;
> +
> + drm_bridge_add(&icn->bridge);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + drm_bridge_remove(&icn->bridge);
> + dev_err(dev, "failed to attach dsi\n");
> + }
> +
> + return ret;
> +}
> +
> +static int chipone_remove(struct mipi_dsi_device *dsi)
> +{
> + struct chipone *icn = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_bridge_remove(&icn->bridge);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id chipone_of_match[] = {
> + { .compatible = "chipone,icn6211", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, chipone_of_match);
> +
> +static struct mipi_dsi_driver chipone_driver = {
> + .probe = chipone_probe,
> + .remove = chipone_remove,
> + .driver = {
> + .name = "chipone-icn6211",
> + .owner = THIS_MODULE,
> + .of_match_table = chipone_of_match,
> + },
> +};
> +module_mipi_dsi_driver(chipone_driver);
> +
> +MODULE_AUTHOR("Jagan Teki <[email protected]>");
> +MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
On Thu, 04 Mar 2021 14:51:32 +0530, Jagan Teki wrote:
> ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
>
> It has a flexible configuration of MIPI DSI signal input and
> produces RGB565, RGB666, RGB888 output format.
>
> Add dt-bingings for it.
>
> Signed-off-by: Jagan Teki <[email protected]>
> ---
> Changes for v4:
> - fixed Laurent comments
> - added regulators
> - replace reset with EN
> - fixed warnings pointed by Robert
> Changes for v3:
> - updated to new dt-bindings style
>
> .../display/bridge/chipone,icn6211.yaml | 99 +++++++++++++++++++
> MAINTAINERS | 5 +
> 2 files changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
>
Reviewed-by: Rob Herring <[email protected]>