This change converts the driver to use device-managed functions in the
probe function. For the clock and regulator disable, some
devm_add_action_or_reset() calls are required, and then
devm_iio_device_register() function can be used register the IIO device.
The final aim here would be for IIO to export only the device-managed
functions of it's API. That's a long way to go and this a small step in
that direction.
Signed-off-by: Alexandru Ardelean <[email protected]>
---
drivers/staging/iio/frequency/ad9834.c | 64 +++++++++++++-------------
1 file changed, 31 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 262c3590e64e..b063cfd0e0e1 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -390,6 +390,20 @@ static const struct iio_info ad9833_info = {
.attrs = &ad9833_attribute_group,
};
+static void ad9834_disable_reg(void *data)
+{
+ struct regulator *reg = data;
+
+ regulator_disable(reg);
+}
+
+static void ad9834_disable_clk(void *data)
+{
+ struct clk *clk = data;
+
+ clk_disable_unprepare(clk);
+}
+
static int ad9834_probe(struct spi_device *spi)
{
struct ad9834_state *st;
@@ -407,26 +421,33 @@ static int ad9834_probe(struct spi_device *spi)
return ret;
}
+ ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_reg, reg);
+ if (ret)
+ return ret;
+
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev) {
ret = -ENOMEM;
- goto error_disable_reg;
+ return ret;
}
- spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
mutex_init(&st->lock);
st->mclk = devm_clk_get(&spi->dev, NULL);
if (IS_ERR(st->mclk)) {
ret = PTR_ERR(st->mclk);
- goto error_disable_reg;
+ return ret;
}
ret = clk_prepare_enable(st->mclk);
if (ret) {
dev_err(&spi->dev, "Failed to enable master clock\n");
- goto error_disable_reg;
+ return ret;
}
+ ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_clk, st->mclk);
+ if (ret)
+ return ret;
+
st->spi = spi;
st->devid = spi_get_device_id(spi)->driver_data;
st->reg = reg;
@@ -470,48 +491,26 @@ static int ad9834_probe(struct spi_device *spi)
ret = spi_sync(st->spi, &st->msg);
if (ret) {
dev_err(&spi->dev, "device init failed\n");
- goto error_clock_unprepare;
+ return ret;
}
ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, 1000000);
if (ret)
- goto error_clock_unprepare;
+ return ret;
ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, 5000000);
if (ret)
- goto error_clock_unprepare;
+ return ret;
ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
if (ret)
- goto error_clock_unprepare;
+ return ret;
ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
if (ret)
- goto error_clock_unprepare;
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_clock_unprepare;
-
- return 0;
-error_clock_unprepare:
- clk_disable_unprepare(st->mclk);
-error_disable_reg:
- regulator_disable(reg);
-
- return ret;
-}
-
-static int ad9834_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad9834_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- clk_disable_unprepare(st->mclk);
- regulator_disable(st->reg);
+ return ret;
- return 0;
+ return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id ad9834_id[] = {
@@ -539,7 +538,6 @@ static struct spi_driver ad9834_driver = {
.of_match_table = ad9834_of_match
},
.probe = ad9834_probe,
- .remove = ad9834_remove,
.id_table = ad9834_id,
};
module_spi_driver(ad9834_driver);
--
2.29.2
On Wed, 10 Mar 2021 11:51:31 +0200
Alexandru Ardelean <[email protected]> wrote:
> This change converts the driver to use device-managed functions in the
> probe function. For the clock and regulator disable, some
> devm_add_action_or_reset() calls are required, and then
> devm_iio_device_register() function can be used register the IIO device.
>
> The final aim here would be for IIO to export only the device-managed
> functions of it's API. That's a long way to go and this a small step in
> that direction.
>
> Signed-off-by: Alexandru Ardelean <[email protected]>
I tweaked this a little to drop st->reg as it's no longer used.
Applied to the togreg branch of iio.git and pushed out as testing for
allow the autobuilders to poke randomly at it.
Thanks,
Jonathan
> ---
> drivers/staging/iio/frequency/ad9834.c | 64 +++++++++++++-------------
> 1 file changed, 31 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> index 262c3590e64e..b063cfd0e0e1 100644
> --- a/drivers/staging/iio/frequency/ad9834.c
> +++ b/drivers/staging/iio/frequency/ad9834.c
> @@ -390,6 +390,20 @@ static const struct iio_info ad9833_info = {
> .attrs = &ad9833_attribute_group,
> };
>
> +static void ad9834_disable_reg(void *data)
> +{
> + struct regulator *reg = data;
> +
> + regulator_disable(reg);
> +}
> +
> +static void ad9834_disable_clk(void *data)
> +{
> + struct clk *clk = data;
> +
> + clk_disable_unprepare(clk);
> +}
> +
> static int ad9834_probe(struct spi_device *spi)
> {
> struct ad9834_state *st;
> @@ -407,26 +421,33 @@ static int ad9834_probe(struct spi_device *spi)
> return ret;
> }
>
> + ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_reg, reg);
> + if (ret)
> + return ret;
> +
> indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> if (!indio_dev) {
> ret = -ENOMEM;
> - goto error_disable_reg;
> + return ret;
> }
> - spi_set_drvdata(spi, indio_dev);
> st = iio_priv(indio_dev);
> mutex_init(&st->lock);
> st->mclk = devm_clk_get(&spi->dev, NULL);
> if (IS_ERR(st->mclk)) {
> ret = PTR_ERR(st->mclk);
> - goto error_disable_reg;
> + return ret;
> }
>
> ret = clk_prepare_enable(st->mclk);
> if (ret) {
> dev_err(&spi->dev, "Failed to enable master clock\n");
> - goto error_disable_reg;
> + return ret;
> }
>
> + ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_clk, st->mclk);
> + if (ret)
> + return ret;
> +
> st->spi = spi;
> st->devid = spi_get_device_id(spi)->driver_data;
> st->reg = reg;
> @@ -470,48 +491,26 @@ static int ad9834_probe(struct spi_device *spi)
> ret = spi_sync(st->spi, &st->msg);
> if (ret) {
> dev_err(&spi->dev, "device init failed\n");
> - goto error_clock_unprepare;
> + return ret;
> }
>
> ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, 1000000);
> if (ret)
> - goto error_clock_unprepare;
> + return ret;
>
> ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, 5000000);
> if (ret)
> - goto error_clock_unprepare;
> + return ret;
>
> ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
> if (ret)
> - goto error_clock_unprepare;
> + return ret;
>
> ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
> if (ret)
> - goto error_clock_unprepare;
> -
> - ret = iio_device_register(indio_dev);
> - if (ret)
> - goto error_clock_unprepare;
> -
> - return 0;
> -error_clock_unprepare:
> - clk_disable_unprepare(st->mclk);
> -error_disable_reg:
> - regulator_disable(reg);
> -
> - return ret;
> -}
> -
> -static int ad9834_remove(struct spi_device *spi)
> -{
> - struct iio_dev *indio_dev = spi_get_drvdata(spi);
> - struct ad9834_state *st = iio_priv(indio_dev);
> -
> - iio_device_unregister(indio_dev);
> - clk_disable_unprepare(st->mclk);
> - regulator_disable(st->reg);
> + return ret;
>
> - return 0;
> + return devm_iio_device_register(&spi->dev, indio_dev);
> }
>
> static const struct spi_device_id ad9834_id[] = {
> @@ -539,7 +538,6 @@ static struct spi_driver ad9834_driver = {
> .of_match_table = ad9834_of_match
> },
> .probe = ad9834_probe,
> - .remove = ad9834_remove,
> .id_table = ad9834_id,
> };
> module_spi_driver(ad9834_driver);