This patch add ACPI support for optee driver.
Signed-off-by: Ran Wang <[email protected]>
---
drivers/tee/optee/core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index cf4718c6d35d..8fb261f4b9db 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -5,6 +5,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/acpi.h>
#include <linux/arm-smccc.h>
#include <linux/errno.h>
#include <linux/io.h>
@@ -735,12 +736,21 @@ static const struct of_device_id optee_dt_match[] = {
};
MODULE_DEVICE_TABLE(of, optee_dt_match);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id optee_acpi_match[] = {
+ { "OPTEE01",},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
+#endif
+
static struct platform_driver optee_driver = {
.probe = optee_probe,
.remove = optee_remove,
.driver = {
.name = "optee",
.of_match_table = optee_dt_match,
+ .acpi_match_table = ACPI_PTR(optee_acpi_match),
},
};
module_platform_driver(optee_driver);
--
2.25.1
On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote:
> This patch add ACPI support for optee driver.
>
> Signed-off-by: Ran Wang <[email protected]>
> ---
> drivers/tee/optee/core.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index cf4718c6d35d..8fb261f4b9db 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -5,6 +5,7 @@
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> +#include <linux/acpi.h>
> #include <linux/arm-smccc.h>
> #include <linux/errno.h>
> #include <linux/io.h>
> @@ -735,12 +736,21 @@ static const struct of_device_id optee_dt_match[] = {
> };
> MODULE_DEVICE_TABLE(of, optee_dt_match);
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id optee_acpi_match[] = {
> + { "OPTEE01",},
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
> +#endif
> +
> static struct platform_driver optee_driver = {
> .probe = optee_probe,
> .remove = optee_remove,
> .driver = {
> .name = "optee",
> .of_match_table = optee_dt_match,
> + .acpi_match_table = ACPI_PTR(optee_acpi_match),
> },
> };
> module_platform_driver(optee_driver);
> --
> 2.25.1
>
This looks simple enough. Ard, is this what you had in mind earlier?
Thanks,
Jens
On Wed, 17 Mar 2021 at 09:04, Jens Wiklander <[email protected]> wrote:
>
> On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote:
> > This patch add ACPI support for optee driver.
> >
> > Signed-off-by: Ran Wang <[email protected]>
> > ---
> > drivers/tee/optee/core.c | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > index cf4718c6d35d..8fb261f4b9db 100644
> > --- a/drivers/tee/optee/core.c
> > +++ b/drivers/tee/optee/core.c
> > @@ -5,6 +5,7 @@
> >
> > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> >
> > +#include <linux/acpi.h>
> > #include <linux/arm-smccc.h>
> > #include <linux/errno.h>
> > #include <linux/io.h>
> > @@ -735,12 +736,21 @@ static const struct of_device_id optee_dt_match[] = {
> > };
> > MODULE_DEVICE_TABLE(of, optee_dt_match);
> >
> > +#ifdef CONFIG_ACPI
> > +static const struct acpi_device_id optee_acpi_match[] = {
> > + { "OPTEE01",},
You cannot just invent ACPI HIDs like that. The 4 character prefix is
a vendor ID that is assigned by the UEFI forum, the 4 following digits
are up to the vendor to assign,
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
dwc3_acpi_match ?? Does this even build?
> > +#endif
> > +
> > static struct platform_driver optee_driver = {
> > .probe = optee_probe,
> > .remove = optee_remove,
> > .driver = {
> > .name = "optee",
> > .of_match_table = optee_dt_match,
> > + .acpi_match_table = ACPI_PTR(optee_acpi_match),
> > },
> > };
> > module_platform_driver(optee_driver);
> > --
> > 2.25.1
> >
>
> This looks simple enough. Ard, is this what you had in mind earlier?
>
Not really.
On SynQuacer, we use
Device (TOS0) {
Name (_HID, "PRP0001")
Name (_UID, 0x0)
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package (2) { "compatible", "linaro,optee-tz" },
Package (2) { "method", "smc" },
}
})
}
which does not require any changes to Linux. So I don't think this
patch is needed at all tbh.
Hi Ard,
On Wednesday, March 17, 2021 4:29 PM, Ard Biesheuvel wrote:
>
> On Wed, 17 Mar 2021 at 09:04, Jens Wiklander <[email protected]> wrote:
> >
> > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote:
> > > This patch add ACPI support for optee driver.
> > >
> > > Signed-off-by: Ran Wang <[email protected]>
> > > ---
> > > drivers/tee/optee/core.c | 10 ++++++++++
> > > 1 file changed, 10 insertions(+)
> > >
> > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > > index cf4718c6d35d..8fb261f4b9db 100644
> > > --- a/drivers/tee/optee/core.c
> > > +++ b/drivers/tee/optee/core.c
> > > @@ -5,6 +5,7 @@
> > >
> > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > >
> > > +#include <linux/acpi.h>
> > > #include <linux/arm-smccc.h>
> > > #include <linux/errno.h>
> > > #include <linux/io.h>
> > > @@ -735,12 +736,21 @@ static const struct of_device_id
> > > optee_dt_match[] = { }; MODULE_DEVICE_TABLE(of, optee_dt_match);
> > >
> > > +#ifdef CONFIG_ACPI
> > > +static const struct acpi_device_id optee_acpi_match[] = {
> > > + { "OPTEE01",},
>
> You cannot just invent ACPI HIDs like that. The 4 character prefix is a vendor ID that is assigned by the UEFI forum, the 4 following digits are
> up to the vendor to assign,
Thanks for this info. Could you please show me where I can find the guide/example for this assign process?
> > > + { },
> > > +};
> > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
>
> dwc3_acpi_match ?? Does this even build?
My bad, I was referring dwc3 code as an example, will correct it.
But looks this typo didn’t trigger error in my unit-test.
>
> > > +#endif
> > > +
> > > static struct platform_driver optee_driver = {
> > > .probe = optee_probe,
> > > .remove = optee_remove,
> > > .driver = {
> > > .name = "optee",
> > > .of_match_table = optee_dt_match,
> > > + .acpi_match_table = ACPI_PTR(optee_acpi_match),
> > > },
> > > };
> > > module_platform_driver(optee_driver);
> > > --
> > > 2.25.1
> > >
> >
> > This looks simple enough. Ard, is this what you had in mind earlier?
> >
>
> Not really.
>
> On SynQuacer, we use
>
> Device (TOS0) {
> Name (_HID, "PRP0001")
> Name (_UID, 0x0)
> Name (_DSD, Package () {
> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> Package () {
> Package (2) { "compatible", "linaro,optee-tz" },
> Package (2) { "method", "smc" },
> }
> })
> }
>
> which does not require any changes to Linux. So I don't think this patch is needed at all tbh.
Thanks for this example, but actually I failed to trigger kernel optee probe function by using
above code in ACPI table.
And I am curious how this 'compatible' properties be picked up by kernel when try to match driver in ACPI mode?
My understanding is to get it done by feeding .acpi_match_table with something, right?
Regards,
Ran
On Thu, 18 Mar 2021 at 08:29, Ran Wang <[email protected]> wrote:
>
> Hi Ard,
>
>
> On Wednesday, March 17, 2021 4:29 PM, Ard Biesheuvel wrote:
> >
> > On Wed, 17 Mar 2021 at 09:04, Jens Wiklander <[email protected]> wrote:
> > >
> > > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote:
> > > > This patch add ACPI support for optee driver.
> > > >
> > > > Signed-off-by: Ran Wang <[email protected]>
> > > > ---
> > > > drivers/tee/optee/core.c | 10 ++++++++++
> > > > 1 file changed, 10 insertions(+)
> > > >
> > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > > > index cf4718c6d35d..8fb261f4b9db 100644
> > > > --- a/drivers/tee/optee/core.c
> > > > +++ b/drivers/tee/optee/core.c
> > > > @@ -5,6 +5,7 @@
> > > >
> > > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > >
> > > > +#include <linux/acpi.h>
> > > > #include <linux/arm-smccc.h>
> > > > #include <linux/errno.h>
> > > > #include <linux/io.h>
> > > > @@ -735,12 +736,21 @@ static const struct of_device_id
> > > > optee_dt_match[] = { }; MODULE_DEVICE_TABLE(of, optee_dt_match);
> > > >
> > > > +#ifdef CONFIG_ACPI
> > > > +static const struct acpi_device_id optee_acpi_match[] = {
> > > > + { "OPTEE01",},
> >
> > You cannot just invent ACPI HIDs like that. The 4 character prefix is a vendor ID that is assigned by the UEFI forum, the 4 following digits are
> > up to the vendor to assign,
>
> Thanks for this info. Could you please show me where I can find the guide/example for this assign process?
>
I think it is better to ask around internally. As far as I know, NXP
already owns a ACPI/PNP vendor prefix.
> > > > + { },
> > > > +};
> > > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
> >
> > dwc3_acpi_match ?? Does this even build?
>
> My bad, I was referring dwc3 code as an example, will correct it.
>
> But looks this typo didn’t trigger error in my unit-test.
>
Does your build have CONFIG_ACPI enabled?
> >
> > > > +#endif
> > > > +
> > > > static struct platform_driver optee_driver = {
> > > > .probe = optee_probe,
> > > > .remove = optee_remove,
> > > > .driver = {
> > > > .name = "optee",
> > > > .of_match_table = optee_dt_match,
> > > > + .acpi_match_table = ACPI_PTR(optee_acpi_match),
> > > > },
> > > > };
> > > > module_platform_driver(optee_driver);
> > > > --
> > > > 2.25.1
> > > >
> > >
> > > This looks simple enough. Ard, is this what you had in mind earlier?
> > >
> >
> > Not really.
> >
> > On SynQuacer, we use
> >
> > Device (TOS0) {
> > Name (_HID, "PRP0001")
> > Name (_UID, 0x0)
> > Name (_DSD, Package () {
> > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> > Package () {
> > Package (2) { "compatible", "linaro,optee-tz" },
> > Package (2) { "method", "smc" },
> > }
> > })
> > }
> >
> > which does not require any changes to Linux. So I don't think this patch is needed at all tbh.
>
> Thanks for this example, but actually I failed to trigger kernel optee probe function by using
> above code in ACPI table.
>
> And I am curious how this 'compatible' properties be picked up by kernel when try to match driver in ACPI mode?
>
On SynQuacer,
$ cat /sys/devices/platform/PRP0001:00/firmware_node/modalias
of:Ntos0TClinaro,optee-tz
> My understanding is to get it done by feeding .acpi_match_table with something, right?
>
The PRP0001 HID is handled in a special way. Please grep the Linux
source if you are curious to understand how this is implemented.
Hi Ard,
On Thursday, March 18, 2021 3:48 PM, Ard Biesheuvel wrote:
>
> On Thu, 18 Mar 2021 at 08:29, Ran Wang <[email protected]> wrote:
> >
> > Hi Ard,
> >
> >
> > On Wednesday, March 17, 2021 4:29 PM, Ard Biesheuvel wrote:
> > >
> > > On Wed, 17 Mar 2021 at 09:04, Jens Wiklander <[email protected]> wrote:
> > > >
> > > > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote:
> > > > > This patch add ACPI support for optee driver.
> > > > >
> > > > > Signed-off-by: Ran Wang <[email protected]>
> > > > > ---
> > > > > drivers/tee/optee/core.c | 10 ++++++++++
> > > > > 1 file changed, 10 insertions(+)
> > > > >
> > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > > > > index cf4718c6d35d..8fb261f4b9db 100644
> > > > > --- a/drivers/tee/optee/core.c
> > > > > +++ b/drivers/tee/optee/core.c
> > > > > @@ -5,6 +5,7 @@
> > > > >
> > > > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > > >
> > > > > +#include <linux/acpi.h>
> > > > > #include <linux/arm-smccc.h>
> > > > > #include <linux/errno.h>
> > > > > #include <linux/io.h>
> > > > > @@ -735,12 +736,21 @@ static const struct of_device_id
> > > > > optee_dt_match[] = { }; MODULE_DEVICE_TABLE(of,
> > > > > optee_dt_match);
> > > > >
> > > > > +#ifdef CONFIG_ACPI
> > > > > +static const struct acpi_device_id optee_acpi_match[] = {
> > > > > + { "OPTEE01",},
> > >
> > > You cannot just invent ACPI HIDs like that. The 4 character prefix
> > > is a vendor ID that is assigned by the UEFI forum, the 4 following
> > > digits are up to the vendor to assign,
> >
> > Thanks for this info. Could you please show me where I can find the guide/example for this assign process?
> >
>
> I think it is better to ask around internally. As far as I know, NXP already owns a ACPI/PNP vendor prefix.
OK
> > > > > + { },
> > > > > +};
> > > > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
> > >
> > > dwc3_acpi_match ?? Does this even build?
> >
> > My bad, I was referring dwc3 code as an example, will correct it.
> >
> > But looks this typo didn’t trigger error in my unit-test.
> >
>
> Does your build have CONFIG_ACPI enabled?
Yes
> > >
> > > > > +#endif
> > > > > +
> > > > > static struct platform_driver optee_driver = {
> > > > > .probe = optee_probe,
> > > > > .remove = optee_remove,
> > > > > .driver = {
> > > > > .name = "optee",
> > > > > .of_match_table = optee_dt_match,
> > > > > + .acpi_match_table = ACPI_PTR(optee_acpi_match),
> > > > > },
> > > > > };
> > > > > module_platform_driver(optee_driver);
> > > > > --
> > > > > 2.25.1
> > > > >
> > > >
> > > > This looks simple enough. Ard, is this what you had in mind earlier?
> > > >
> > >
> > > Not really.
> > >
> > > On SynQuacer, we use
> > >
> > > Device (TOS0) {
> > > Name (_HID, "PRP0001")
> > > Name (_UID, 0x0)
> > > Name (_DSD, Package () {
> > > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> > > Package () {
> > > Package (2) { "compatible", "linaro,optee-tz" },
> > > Package (2) { "method", "smc" },
> > > }
> > > })
> > > }
> > >
> > > which does not require any changes to Linux. So I don't think this patch is needed at all tbh.
> >
> > Thanks for this example, but actually I failed to trigger kernel optee
> > probe function by using above code in ACPI table.
> >
> > And I am curious how this 'compatible' properties be picked up by kernel when try to match driver in ACPI mode?
> >
>
> On SynQuacer,
>
> $ cat /sys/devices/platform/PRP0001:00/firmware_node/modalias
> of:Ntos0TClinaro,optee-tz
>
> > My understanding is to get it done by feeding .acpi_match_table with something, right?
> >
>
> The PRP0001 HID is handled in a special way. Please grep the Linux source if you are curious to understand how this is implemented.
Yes, my failure is due to without PRP0001, and I have found the Doc in kernel code explaining that. Now it works fine on my side :)
Thanks for the educate!
Regards,
Ran