Commit 44d30d622821d ("phy: cadence: Add driver for Sierra PHY")
de-asserts PHY_RESET even before the configurations are loaded in
phy_init(). However PHY_RESET should be de-asserted only after
all the configurations has been initialized, instead of de-asserting
in probe. Fix it here.
Fixes: 44d30d622821d ("phy: cadence: Add driver for Sierra PHY")
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Cc: <[email protected]> # v5.4+
Reviewed-by: Philipp Zabel <[email protected]>
---
drivers/phy/cadence/phy-cadence-sierra.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 26a0badabe38..19f32ae877b9 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -319,6 +319,12 @@ static int cdns_sierra_phy_on(struct phy *gphy)
u32 val;
int ret;
+ ret = reset_control_deassert(sp->phy_rst);
+ if (ret) {
+ dev_err(dev, "Failed to take the PHY out of reset\n");
+ return ret;
+ }
+
/* Take the PHY lane group out of reset */
ret = reset_control_deassert(ins->lnk_rst);
if (ret) {
@@ -616,7 +622,6 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- reset_control_deassert(sp->phy_rst);
return PTR_ERR_OR_ZERO(phy_provider);
put_child:
--
2.17.1