The warning message did not printed the LCD pixel clock rate but the LCD
clock divisor input rate. As a consequence, the required and real pixel
clock rates are now passed to the tilcdc_pclk_diff().
Signed-off-by: Dario Binacchi <[email protected]>
---
Changes in v3:
- Replace calculated with requested in the warning message.
- Swap the positions of the real_pclk_rate, and pclk_rate parameters
in the warning message.
Changes in v2:
- The patch has been added in version 2.
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index ac6228cb04d9..381a706ab7c2 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -203,7 +203,7 @@ static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct tilcdc_drm_private *priv = dev->dev_private;
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
- unsigned long clk_rate, real_rate, real_pclk_rate, pclk_rate;
+ unsigned long clk_rate, real_pclk_rate, pclk_rate;
unsigned int clkdiv;
int ret;
@@ -239,12 +239,12 @@ static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
* 5% is an arbitrary value - LCDs are usually quite tolerant
* about pixel clock rates.
*/
- real_rate = clkdiv * pclk_rate;
+ real_pclk_rate = clk_rate / clkdiv;
- if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
+ if (tilcdc_pclk_diff(pclk_rate, real_pclk_rate) > 5) {
dev_warn(dev->dev,
- "effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n",
- clk_rate, real_rate);
+ "effective pixel clock rate (%luHz) differs from the requested rate (%luHz)\n",
+ real_pclk_rate, pclk_rate);
}
}
--
2.17.1