The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
as well as the current link speed. Explicitly configure the GSWIP to
automatically select the appropriate xMII interface clock.
This fixes an issue seen by some users where ports using an external
RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
likely this is due to an "invalid" xMII clock being selected either by
the bootloader or hardware-defaults.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <[email protected]>
---
It would be great to have this fix backported to Linux 5.4 and 5.10 to
get rid of one more blocker which prevents OpenWrt from switching to
this new in-tree driver.
drivers/net/dsa/lantiq_gswip.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 52e865a3912c..809dfa3be6bb 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -799,10 +799,15 @@ static int gswip_setup(struct dsa_switch *ds)
/* Configure the MDIO Clock 2.5 MHz */
gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
- /* Disable the xMII link */
- for (i = 0; i < priv->hw_info->max_ports; i++)
+ for (i = 0; i < priv->hw_info->max_ports; i++) {
+ /* Disable the xMII link */
gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
+ /* Automatically select the xMII interface clock */
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK,
+ GSWIP_MII_CFG_RATE_AUTO, i);
+ }
+
/* enable special tag insertion on cpu port */
gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
GSWIP_FDMA_PCTRLp(cpu_port));
--
2.31.0
On 3/24/2021 12:36 PM, Martin Blumenstingl wrote:
> The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
> as well as the current link speed. Explicitly configure the GSWIP to
> automatically select the appropriate xMII interface clock.
>
> This fixes an issue seen by some users where ports using an external
> RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
> likely this is due to an "invalid" xMII clock being selected either by
> the bootloader or hardware-defaults.
>
> Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
> Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
> ---
> It would be great to have this fix backported to Linux 5.4 and 5.10 to
> get rid of one more blocker which prevents OpenWrt from switching to
> this new in-tree driver.
Given there is a Fixes: tag this should land at some point in the stable
tree auto-selection. Stable fixes for networking patches follows a
slightly different path:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n145
>
>
> drivers/net/dsa/lantiq_gswip.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
> index 52e865a3912c..809dfa3be6bb 100644
> --- a/drivers/net/dsa/lantiq_gswip.c
> +++ b/drivers/net/dsa/lantiq_gswip.c
> @@ -799,10 +799,15 @@ static int gswip_setup(struct dsa_switch *ds)
> /* Configure the MDIO Clock 2.5 MHz */
> gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
>
> - /* Disable the xMII link */
> - for (i = 0; i < priv->hw_info->max_ports; i++)
> + for (i = 0; i < priv->hw_info->max_ports; i++) {
> + /* Disable the xMII link */
> gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
>
> + /* Automatically select the xMII interface clock */
> + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK,
> + GSWIP_MII_CFG_RATE_AUTO, i);
> + }
> +
> /* enable special tag insertion on cpu port */
> gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
> GSWIP_FDMA_PCTRLp(cpu_port));
>
--
Florian
Hi Florian,
On Thu, Mar 25, 2021 at 7:09 PM Florian Fainelli <[email protected]> wrote:
[...]
> > It would be great to have this fix backported to Linux 5.4 and 5.10 to
> > get rid of one more blocker which prevents OpenWrt from switching to
> > this new in-tree driver.
>
> Given there is a Fixes: tag this should land at some point in the stable
> tree auto-selection. Stable fixes for networking patches follows a
> slightly different path:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n145
thank you very much for this link - I missed the news that net patches
should now also be Cc'ed to linux-stable
I think this simplifies the process (at least for me as contributor)
Also thank you for the Reviewed-by!
Best regards,
Martin
Hello:
This patch was applied to netdev/net.git (refs/heads/master):
On Wed, 24 Mar 2021 20:36:04 +0100 you wrote:
> The xMII interface clock depends on the PHY interface (MII, RMII, RGMII)
> as well as the current link speed. Explicitly configure the GSWIP to
> automatically select the appropriate xMII interface clock.
>
> This fixes an issue seen by some users where ports using an external
> RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most
> likely this is due to an "invalid" xMII clock being selected either by
> the bootloader or hardware-defaults.
>
> [...]
Here is the summary with links:
- [net] net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock
https://git.kernel.org/netdev/net/c/3e6fdeb28f4c
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html