From: Quanyang Wang <[email protected]>
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
Reported-by: Laurent Pinchart <[email protected]>
Signed-off-by: Quanyang Wang <[email protected]>
---
drivers/clk/zynqmp/pll.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index fb16ddbb7e2d..1aea5c137b69 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -104,9 +104,7 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
/* Enable the fractional mode if needed */
rate_div = (rate * FRAC_DIV) / *prate;
f = rate_div % FRAC_DIV;
- zynqmp_pll_set_mode(hw, !!f);
-
- if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ if (f) {
if (rate > PS_PLL_VCO_MAX) {
fbdiv = rate / PS_PLL_VCO_MAX;
rate = rate / (fbdiv + 1);
@@ -177,10 +175,12 @@ static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
long rate_div, frac, m, f;
int ret;
- if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
- rate_div = (rate * FRAC_DIV) / parent_rate;
+ rate_div = (rate * FRAC_DIV) / parent_rate;
+ f = rate_div % FRAC_DIV;
+ zynqmp_pll_set_mode(hw, !!f);
+
+ if (f) {
m = rate_div / FRAC_DIV;
- f = rate_div % FRAC_DIV;
m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
rate = parent_rate * m;
frac = (parent_rate * f) / FRAC_DIV;
--
2.25.1
Quoting [email protected] (2021-03-31 02:00:18)
> From: Quanyang Wang <[email protected]>
>
> The round_rate callback should only perform rate calculation and not
> involve calling zynqmp_pll_set_mode to change the pll mode. So let's
> move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
>
> Reported-by: Laurent Pinchart <[email protected]>
> Signed-off-by: Quanyang Wang <[email protected]>
> ---
Any Fixes tag?
Hi Stephen,
On 4/1/21 9:48 AM, Stephen Boyd wrote:
> Quoting [email protected] (2021-03-31 02:00:18)
>> From: Quanyang Wang <[email protected]>
>>
>> The round_rate callback should only perform rate calculation and not
>> involve calling zynqmp_pll_set_mode to change the pll mode. So let's
>> move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
>>
>> Reported-by: Laurent Pinchart <[email protected]>
>> Signed-off-by: Quanyang Wang <[email protected]>
>> ---
> Any Fixes tag?
Thanks for your reminder. I will add Fixes tag at the V2 version patch.
Thanks,
Quanyang