To allow slow charger loops to comply to pSnkStby requirement,
this patch introduces slow-charger-loop which when set makes
the port request PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY
(instead of 3A or the 1.5A during SNK_DISCOVERY) and the actual
currrent limit after RX of PD_CTRL_PSRDY for PD link or during
SNK_READY for non-pd link.
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
---
.../devicetree/bindings/connector/usb-connector.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index b6daedd62516..09ad3ad983a6 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -197,6 +197,13 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3]
+ slow-charger-loop:
+ description: Allows slow charging loops to comply to pSnkStby. When set makes
+ the port request pSnkStby(2.5W - 5V@500mA) upon entering SNK_DISCOVERY(instead
+ of 3A or the 1.5A during SNK_DISCOVERY) and the actual currrent limit after
+ reception of PS_Ready for PD link or during SNK_READY for non-pd link.
+ type: boolean
+
required:
- compatible
--
2.31.0.208.g409f899ff0-goog