2021-04-08 02:59:54

by Ran Wang

[permalink] [raw]
Subject: [PATCH v7] soc: fsl: enable acpi support in RCPM driver

From: Peng Ma <[email protected]>

This patch enables ACPI support in RCPM driver.

Signed-off-by: Peng Ma <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
---
Change in v7:
- Update comment for checking RCPM node which refferred to

Change in v6:
- Remove copyright udpate to rebase on latest mainline

Change in v5:
- Fix panic when dev->of_node is null

Change in v4:
- Make commit subject more accurate
- Remove unrelated new blank line

Change in v3:
- Add #ifdef CONFIG_ACPI for acpi_device_id
- Rename rcpm_acpi_imx_ids to rcpm_acpi_ids

Change in v2:
- Update acpi_device_id to fix conflict with other driver

drivers/soc/fsl/rcpm.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
index 4ace28cab314..90d3f4060b0c 100644
--- a/drivers/soc/fsl/rcpm.c
+++ b/drivers/soc/fsl/rcpm.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/kernel.h>
+#include <linux/acpi.h>

#define RCPM_WAKEUP_CELL_MAX_SIZE 7

@@ -78,10 +79,20 @@ static int rcpm_pm_prepare(struct device *dev)
"fsl,rcpm-wakeup", value,
rcpm->wakeup_cells + 1);

- /* Wakeup source should refer to current rcpm device */
- if (ret || (np->phandle != value[0]))
+ if (ret)
continue;

+ /*
+ * For DT mode, would handle devices with "fsl,rcpm-wakeup"
+ * pointing to the current RCPM node.
+ *
+ * For ACPI mode, currently we assume there is only one
+ * RCPM controller existing.
+ */
+ if (is_of_node(dev->fwnode))
+ if (np->phandle != value[0])
+ continue;
+
/* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
* number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
* of wakeup source IP contains an integer array: <phandle to
@@ -172,10 +183,19 @@ static const struct of_device_id rcpm_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rcpm_of_match);

+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rcpm_acpi_ids[] = {
+ {"NXP0015",},
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, rcpm_acpi_ids);
+#endif
+
static struct platform_driver rcpm_driver = {
.driver = {
.name = "rcpm",
.of_match_table = rcpm_of_match,
+ .acpi_match_table = ACPI_PTR(rcpm_acpi_ids),
.pm = &rcpm_pm_ops,
},
.probe = rcpm_probe,
--
2.25.1


2021-04-08 21:34:43

by Leo Li

[permalink] [raw]
Subject: Re: [PATCH v7] soc: fsl: enable acpi support in RCPM driver

On Wed, Apr 7, 2021 at 9:58 PM Ran Wang <[email protected]> wrote:
>
> From: Peng Ma <[email protected]>
>
> This patch enables ACPI support in RCPM driver.
>
> Signed-off-by: Peng Ma <[email protected]>
> Signed-off-by: Ran Wang <[email protected]>

Applied for next. Thanks.

> ---
> Change in v7:
> - Update comment for checking RCPM node which refferred to
>
> Change in v6:
> - Remove copyright udpate to rebase on latest mainline
>
> Change in v5:
> - Fix panic when dev->of_node is null
>
> Change in v4:
> - Make commit subject more accurate
> - Remove unrelated new blank line
>
> Change in v3:
> - Add #ifdef CONFIG_ACPI for acpi_device_id
> - Rename rcpm_acpi_imx_ids to rcpm_acpi_ids
>
> Change in v2:
> - Update acpi_device_id to fix conflict with other driver
>
> drivers/soc/fsl/rcpm.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
> index 4ace28cab314..90d3f4060b0c 100644
> --- a/drivers/soc/fsl/rcpm.c
> +++ b/drivers/soc/fsl/rcpm.c
> @@ -13,6 +13,7 @@
> #include <linux/slab.h>
> #include <linux/suspend.h>
> #include <linux/kernel.h>
> +#include <linux/acpi.h>
>
> #define RCPM_WAKEUP_CELL_MAX_SIZE 7
>
> @@ -78,10 +79,20 @@ static int rcpm_pm_prepare(struct device *dev)
> "fsl,rcpm-wakeup", value,
> rcpm->wakeup_cells + 1);
>
> - /* Wakeup source should refer to current rcpm device */
> - if (ret || (np->phandle != value[0]))
> + if (ret)
> continue;
>
> + /*
> + * For DT mode, would handle devices with "fsl,rcpm-wakeup"
> + * pointing to the current RCPM node.
> + *
> + * For ACPI mode, currently we assume there is only one
> + * RCPM controller existing.
> + */
> + if (is_of_node(dev->fwnode))
> + if (np->phandle != value[0])
> + continue;
> +
> /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
> * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
> * of wakeup source IP contains an integer array: <phandle to
> @@ -172,10 +183,19 @@ static const struct of_device_id rcpm_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, rcpm_of_match);
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id rcpm_acpi_ids[] = {
> + {"NXP0015",},
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, rcpm_acpi_ids);
> +#endif
> +
> static struct platform_driver rcpm_driver = {
> .driver = {
> .name = "rcpm",
> .of_match_table = rcpm_of_match,
> + .acpi_match_table = ACPI_PTR(rcpm_acpi_ids),
> .pm = &rcpm_pm_ops,
> },
> .probe = rcpm_probe,
> --
> 2.25.1
>