From: Chris Chiu <[email protected]>
Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work
after the system resumes from suspend with remote wakeup enabled
device connected:
[ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71)
[ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71)
Information of this hub:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=5487 Rev= 1.47
S: Manufacturer=Dell Inc.
S: Product=Dell dock
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
The failure results from the ETIMEDOUT by chance when turning on
the suspend feature of the hub. The usb_resume_device will not be
invoked since the device state is not set to suspended, then the
hub fails to activate subsequently.
The USB_PORT_FEAT_SUSPEND is not really necessary due to the
"global suspend" in USB 2.0 spec. It's only for many hub devices
which don't relay wakeup requests from the devices connected to
downstream ports. For this realtek hub, there's no problem waking
up the system from connected keyboard.
This commit bypasses the USB_PORT_FEAT_SUSPEND for the quirky hub.
Signed-off-by: Chris Chiu <[email protected]>
---
Changelog:
v2:
Since the 0bda:5413 is the hub device connects to upstream hub
0bda:5487, the upstream hub which fails the USB_PORT_FEAT_SUSPEND
is the target this patch really wants to quirk.
- Fix the quirk target from the connected hub device to the
upstream hub
- Correct the usb info of the target hub in the commit message
- Revise the description of the quirk
Documentation/admin-guide/kernel-parameters.txt | 3 +++
drivers/usb/core/hub.c | 7 +++++--
drivers/usb/core/quirks.c | 5 +++++
include/linux/usb/quirks.h | 3 +++
4 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 04545725f187..1bb22a9ea5ba 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5682,6 +5682,9 @@
pause after every control message);
o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
delay after resetting its port);
+ p = USB_QUIRK_NO_SET_FEAT_SUSPEND (Hub can't
+ handle set-port-feature-suspend request
+ correctly);
Example: quirks=0781:5580:bk,0a5c:5834:gij
usbhid.mousepoll=
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 7f71218cc1e5..36b38af46a41 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3329,8 +3329,11 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
* descendants is enabled for remote wakeup.
*/
else if (PMSG_IS_AUTO(msg) || usb_wakeup_enabled_descendants(udev) > 0)
- status = set_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_SUSPEND);
+ if (hub->hdev->quirks & USB_QUIRK_NO_SET_FEAT_SUSPEND)
+ status = 0;
+ else
+ status = set_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_SUSPEND);
else {
really_suspend = false;
status = 0;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 76ac5d6555ae..9f373579bf9e 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -138,6 +138,9 @@ static int quirks_param_set(const char *value, const struct kernel_param *kp)
case 'o':
flags |= USB_QUIRK_HUB_SLOW_RESET;
break;
+ case 'p':
+ flags |= USB_QUIRK_NO_SET_FEAT_SUSPEND;
+ break;
/* Ignore unrecognized flag characters */
}
}
@@ -406,6 +409,8 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Realtek hub in Dell WD19 (Type-C) */
{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+ { USB_DEVICE(0x0bda, 0x5487), .driver_info =
+ USB_QUIRK_NO_SET_FEAT_SUSPEND },
/* Generic RTL8153 based ethernet adapters */
{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 5e4c497f54d6..ac469d446c78 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -72,4 +72,7 @@
/* device has endpoints that should be ignored */
#define USB_QUIRK_ENDPOINT_IGNORE BIT(15)
+/* Hub can't handle set-port-feature-suspend request correctly */
+#define USB_QUIRK_NO_SET_FEAT_SUSPEND BIT(16)
+
#endif /* __LINUX_USB_QUIRKS_H */
--
2.20.1