On 14.04.2021 19:35:19, Aswath Govindraju wrote:
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -61,6 +61,15 @@ config USB_LGM_PHY
> interface to interact with USB GEN-II and USB 3.x PHY that is part
> of the Intel network SOC.
>
> +config PHY_CAN_TRANSCEIVER
> + tristate "CAN transceiver PHY"
> + select GENERIC_PHY
> + help
> + This option enables support for CAN transceivers as a PHY. This
> + driver provides function for putting the transceivers in various
> + functional modes using gpios and sets the attribute max link
> + rate, for mcan drivers.
> +
> source "drivers/phy/allwinner/Kconfig"
> source "drivers/phy/amlogic/Kconfig"
> source "drivers/phy/broadcom/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index adac1b1a39d1..9c66101c9605 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o
> +obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o
> obj-y += allwinner/ \
> amlogic/ \
> broadcom/ \
I'm not sure how the phy framework handles this, but I assume it's
alphabetically sorted, too.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |