Hi,
This small series adds the TJA1103 PHY driver.
Changes in v2:
- implemented genphy_c45_pma_suspend/genphy_c45_pma_suspend
- set default internal delays set to 2ns(90 degrees)
- added "VEND1_" prefix to the register definitions
- disable rxid in case of txid
- disable txid in case of rxid
- disable internal delays in rgmii mode
- reduced max line length to 80 characters
- rebased on top of net-next/master
- use genphy_c45_loopback as .set_loopback callback
- renamed the driver from nxp-c45 to nxp-c45-tja11xx
- used phy phy_set_bits_mmd/phy_clear_bits_mmd instead on phy_write_mmd where
I had to set/clear one bit.
Radu Pirea (NXP OSS) (2):
net: phy: add genphy_c45_pma_suspend/resume
phy: nxp-c45: add driver for tja1103
MAINTAINERS | 6 +
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/nxp-c45-tja11xx.c | 607 ++++++++++++++++++++++++++++++
drivers/net/phy/phy-c45.c | 43 +++
include/linux/phy.h | 2 +
6 files changed, 665 insertions(+)
create mode 100644 drivers/net/phy/nxp-c45-tja11xx.c
base-commit: 5b489fea977c2b23e26e2f630478da0f4bfdc879
--
2.31.1