2021-04-14 14:55:22

by Alexandru Ardelean

[permalink] [raw]
Subject: [PATCH] iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <[email protected]>
Cc: Srinivas Pandruvada <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
---
drivers/iio/accel/Kconfig | 1 -
drivers/iio/common/hid-sensors/Kconfig | 1 +
drivers/iio/gyro/Kconfig | 1 -
drivers/iio/humidity/Kconfig | 1 -
drivers/iio/light/Kconfig | 2 --
drivers/iio/magnetometer/Kconfig | 1 -
drivers/iio/orientation/Kconfig | 2 --
drivers/iio/pressure/Kconfig | 1 -
drivers/iio/temperature/Kconfig | 1 -
9 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index cceda3cecbcf..8b1723635cce 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -229,7 +229,6 @@ config DMARD10
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 24d492567336..2a3dd3b907be 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
tristate "Common module (trigger) for all HID Sensor IIO drivers"
depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
select IIO_TRIGGER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build trigger support for HID sensors.
Triggers will be send if all requested attributes were read.
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 5824f2edf975..20b5ac7ab66a 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -111,7 +111,6 @@ config FXAS21002C_SPI
config HID_SENSOR_GYRO_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Gyroscope 3D"
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 6549fcf6db69..2de5494e7c22 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
tristate "HID Environmental humidity sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 33ad4dd0b5c7..917f9becf9c7 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -256,7 +256,6 @@ config ISL29125
config HID_SENSOR_ALS
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID ALS"
@@ -270,7 +269,6 @@ config HID_SENSOR_ALS
config HID_SENSOR_PROX
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID PROX"
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 5d4ffd66032e..74ad5701c6c2 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -95,7 +95,6 @@ config MAG3110
config HID_SENSOR_MAGNETOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Magenetometer 3D"
diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig
index a505583cc2fd..396cbbb867f4 100644
--- a/drivers/iio/orientation/Kconfig
+++ b/drivers/iio/orientation/Kconfig
@@ -9,7 +9,6 @@ menu "Inclinometer sensors"
config HID_SENSOR_INCLINOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Inclinometer 3D"
@@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
config HID_SENSOR_DEVICE_ROTATION
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Device Rotation"
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 689b978db4f9..fc0d3cfca418 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -79,7 +79,6 @@ config DPS310
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID PRESS"
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index c5482983f568..f20ae3c963cb 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
tristate "HID Environmental temperature sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
--
2.30.2


2021-04-15 17:00:14

by srinivas pandruvada

[permalink] [raw]
Subject: Re: [PATCH] iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

On Wed, 2021-04-14 at 11:49 +0300, Alexandru Ardelean wrote:
> During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
> setup into hid_sensor_setup_trigger"), the
> iio_triggered_buffer_{setup,cleanup}() functions got moved under the
> hid-sensor-trigger module.
>
> The above change works fine, if any of the sensors get built.
> However, when
> only the common hid-sensor-trigger module gets built (and none of the
> drivers), then the IIO_TRIGGERED_BUFFER symbol isn't
> selected/enforced.
>
> Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
> symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
> hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER
> gets
> selected.
>
> All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So,
> this
> change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
>
> Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup
> into hid_sensor_setup_trigger")
> Reported-by: Thomas Deutschmann <[email protected]>
> Cc: Srinivas Pandruvada <[email protected]>
> Signed-off-by: Alexandru Ardelean <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>

> ---
> drivers/iio/accel/Kconfig | 1 -
> drivers/iio/common/hid-sensors/Kconfig | 1 +
> drivers/iio/gyro/Kconfig | 1 -
> drivers/iio/humidity/Kconfig | 1 -
> drivers/iio/light/Kconfig | 2 --
> drivers/iio/magnetometer/Kconfig | 1 -
> drivers/iio/orientation/Kconfig | 2 --
> drivers/iio/pressure/Kconfig | 1 -
> drivers/iio/temperature/Kconfig | 1 -
> 9 files changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index cceda3cecbcf..8b1723635cce 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -229,7 +229,6 @@ config DMARD10
> config HID_SENSOR_ACCEL_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID Accelerometers 3D"
> diff --git a/drivers/iio/common/hid-sensors/Kconfig
> b/drivers/iio/common/hid-sensors/Kconfig
> index 24d492567336..2a3dd3b907be 100644
> --- a/drivers/iio/common/hid-sensors/Kconfig
> +++ b/drivers/iio/common/hid-sensors/Kconfig
> @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
> tristate "Common module (trigger) for all HID Sensor IIO
> drivers"
> depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON &&
> IIO_BUFFER
> select IIO_TRIGGER
> + select IIO_TRIGGERED_BUFFER
> help
> Say yes here to build trigger support for HID sensors.
> Triggers will be send if all requested attributes were read.
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index 5824f2edf975..20b5ac7ab66a 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -111,7 +111,6 @@ config FXAS21002C_SPI
> config HID_SENSOR_GYRO_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID Gyroscope 3D"
> diff --git a/drivers/iio/humidity/Kconfig
> b/drivers/iio/humidity/Kconfig
> index 6549fcf6db69..2de5494e7c22 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
> tristate "HID Environmental humidity sensor"
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> help
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 33ad4dd0b5c7..917f9becf9c7 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -256,7 +256,6 @@ config ISL29125
> config HID_SENSOR_ALS
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID ALS"
> @@ -270,7 +269,6 @@ config HID_SENSOR_ALS
> config HID_SENSOR_PROX
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID PROX"
> diff --git a/drivers/iio/magnetometer/Kconfig
> b/drivers/iio/magnetometer/Kconfig
> index 5d4ffd66032e..74ad5701c6c2 100644
> --- a/drivers/iio/magnetometer/Kconfig
> +++ b/drivers/iio/magnetometer/Kconfig
> @@ -95,7 +95,6 @@ config MAG3110
> config HID_SENSOR_MAGNETOMETER_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID Magenetometer 3D"
> diff --git a/drivers/iio/orientation/Kconfig
> b/drivers/iio/orientation/Kconfig
> index a505583cc2fd..396cbbb867f4 100644
> --- a/drivers/iio/orientation/Kconfig
> +++ b/drivers/iio/orientation/Kconfig
> @@ -9,7 +9,6 @@ menu "Inclinometer sensors"
> config HID_SENSOR_INCLINOMETER_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID Inclinometer 3D"
> @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
> config HID_SENSOR_DEVICE_ROTATION
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID Device Rotation"
> diff --git a/drivers/iio/pressure/Kconfig
> b/drivers/iio/pressure/Kconfig
> index 689b978db4f9..fc0d3cfca418 100644
> --- a/drivers/iio/pressure/Kconfig
> +++ b/drivers/iio/pressure/Kconfig
> @@ -79,7 +79,6 @@ config DPS310
> config HID_SENSOR_PRESS
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> tristate "HID PRESS"
> diff --git a/drivers/iio/temperature/Kconfig
> b/drivers/iio/temperature/Kconfig
> index c5482983f568..f20ae3c963cb 100644
> --- a/drivers/iio/temperature/Kconfig
> +++ b/drivers/iio/temperature/Kconfig
> @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
> tristate "HID Environmental temperature sensor"
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> select HID_SENSOR_IIO_COMMON
> select HID_SENSOR_IIO_TRIGGER
> help

2021-04-18 10:27:32

by Jonathan Cameron

[permalink] [raw]
Subject: Re: [PATCH] iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

On Thu, 15 Apr 2021 09:58:33 -0700
Srinivas Pandruvada <[email protected]> wrote:

> On Wed, 2021-04-14 at 11:49 +0300, Alexandru Ardelean wrote:
> > During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
> > setup into hid_sensor_setup_trigger"), the
> > iio_triggered_buffer_{setup,cleanup}() functions got moved under the
> > hid-sensor-trigger module.
> >
> > The above change works fine, if any of the sensors get built.
> > However, when
> > only the common hid-sensor-trigger module gets built (and none of the
> > drivers), then the IIO_TRIGGERED_BUFFER symbol isn't
> > selected/enforced.
> >
> > Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
> > symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
> > hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER
> > gets
> > selected.
> >
> > All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So,
> > this
> > change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
> >
> > Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup
> > into hid_sensor_setup_trigger")
> > Reported-by: Thomas Deutschmann <[email protected]>
> > Cc: Srinivas Pandruvada <[email protected]>
> > Signed-off-by: Alexandru Ardelean <[email protected]>
> Acked-by: Srinivas Pandruvada <[email protected]>
Applied to the fixes-togreg branch of iio.git.

Always good to see the autobuilders can find corners no one sane would ever
hit :)

Jonathan

>
> > ---
> > drivers/iio/accel/Kconfig | 1 -
> > drivers/iio/common/hid-sensors/Kconfig | 1 +
> > drivers/iio/gyro/Kconfig | 1 -
> > drivers/iio/humidity/Kconfig | 1 -
> > drivers/iio/light/Kconfig | 2 --
> > drivers/iio/magnetometer/Kconfig | 1 -
> > drivers/iio/orientation/Kconfig | 2 --
> > drivers/iio/pressure/Kconfig | 1 -
> > drivers/iio/temperature/Kconfig | 1 -
> > 9 files changed, 1 insertion(+), 10 deletions(-)
> >
> > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > index cceda3cecbcf..8b1723635cce 100644
> > --- a/drivers/iio/accel/Kconfig
> > +++ b/drivers/iio/accel/Kconfig
> > @@ -229,7 +229,6 @@ config DMARD10
> > config HID_SENSOR_ACCEL_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID Accelerometers 3D"
> > diff --git a/drivers/iio/common/hid-sensors/Kconfig
> > b/drivers/iio/common/hid-sensors/Kconfig
> > index 24d492567336..2a3dd3b907be 100644
> > --- a/drivers/iio/common/hid-sensors/Kconfig
> > +++ b/drivers/iio/common/hid-sensors/Kconfig
> > @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
> > tristate "Common module (trigger) for all HID Sensor IIO
> > drivers"
> > depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON &&
> > IIO_BUFFER
> > select IIO_TRIGGER
> > + select IIO_TRIGGERED_BUFFER
> > help
> > Say yes here to build trigger support for HID sensors.
> > Triggers will be send if all requested attributes were read.
> > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> > index 5824f2edf975..20b5ac7ab66a 100644
> > --- a/drivers/iio/gyro/Kconfig
> > +++ b/drivers/iio/gyro/Kconfig
> > @@ -111,7 +111,6 @@ config FXAS21002C_SPI
> > config HID_SENSOR_GYRO_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID Gyroscope 3D"
> > diff --git a/drivers/iio/humidity/Kconfig
> > b/drivers/iio/humidity/Kconfig
> > index 6549fcf6db69..2de5494e7c22 100644
> > --- a/drivers/iio/humidity/Kconfig
> > +++ b/drivers/iio/humidity/Kconfig
> > @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
> > tristate "HID Environmental humidity sensor"
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > help
> > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> > index 33ad4dd0b5c7..917f9becf9c7 100644
> > --- a/drivers/iio/light/Kconfig
> > +++ b/drivers/iio/light/Kconfig
> > @@ -256,7 +256,6 @@ config ISL29125
> > config HID_SENSOR_ALS
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID ALS"
> > @@ -270,7 +269,6 @@ config HID_SENSOR_ALS
> > config HID_SENSOR_PROX
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID PROX"
> > diff --git a/drivers/iio/magnetometer/Kconfig
> > b/drivers/iio/magnetometer/Kconfig
> > index 5d4ffd66032e..74ad5701c6c2 100644
> > --- a/drivers/iio/magnetometer/Kconfig
> > +++ b/drivers/iio/magnetometer/Kconfig
> > @@ -95,7 +95,6 @@ config MAG3110
> > config HID_SENSOR_MAGNETOMETER_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID Magenetometer 3D"
> > diff --git a/drivers/iio/orientation/Kconfig
> > b/drivers/iio/orientation/Kconfig
> > index a505583cc2fd..396cbbb867f4 100644
> > --- a/drivers/iio/orientation/Kconfig
> > +++ b/drivers/iio/orientation/Kconfig
> > @@ -9,7 +9,6 @@ menu "Inclinometer sensors"
> > config HID_SENSOR_INCLINOMETER_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID Inclinometer 3D"
> > @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
> > config HID_SENSOR_DEVICE_ROTATION
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID Device Rotation"
> > diff --git a/drivers/iio/pressure/Kconfig
> > b/drivers/iio/pressure/Kconfig
> > index 689b978db4f9..fc0d3cfca418 100644
> > --- a/drivers/iio/pressure/Kconfig
> > +++ b/drivers/iio/pressure/Kconfig
> > @@ -79,7 +79,6 @@ config DPS310
> > config HID_SENSOR_PRESS
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > tristate "HID PRESS"
> > diff --git a/drivers/iio/temperature/Kconfig
> > b/drivers/iio/temperature/Kconfig
> > index c5482983f568..f20ae3c963cb 100644
> > --- a/drivers/iio/temperature/Kconfig
> > +++ b/drivers/iio/temperature/Kconfig
> > @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
> > tristate "HID Environmental temperature sensor"
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > select HID_SENSOR_IIO_COMMON
> > select HID_SENSOR_IIO_TRIGGER
> > help
>