Allocating IO and IRQ resources to LPC devices is in-theory an operation
for the host, however ASPEED don't appear to expose this capability
outside the BMC (e.g. SuperIO). Instead, we are left with BMC-internal
registers for managing these resources, so introduce a devicetree
property for KCS devices to describe SerIRQ properties.
Signed-off-by: Andrew Jeffery <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
index 697ca575454f..4ff6fabfcb30 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
@@ -49,6 +49,18 @@ properties:
channels the status address is derived from the data address, but the
status address may be optionally provided.
+ aspeed,lpc-interrupts:
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ minItems: 2
+ maxItems: 2
+ description: |
+ A 2-cell property expressing the LPC SerIRQ number and the interrupt
+ level/sense encoding (specified in the standard fashion).
+
+ Note that the generated interrupt is issued from the BMC to the host, and
+ thus the target interrupt controller is not captured by the BMC's
+ devicetree.
+
kcs_chan:
deprecated: true
$ref: '/schemas/types.yaml#/definitions/uint32'
@@ -84,9 +96,11 @@ allOf:
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
kcs3: kcs@24 {
compatible = "aspeed,ast2600-kcs-bmc";
reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupts = <8>;
};
--
2.27.0