2021-05-11 04:33:21

by Oleksij Rempel

[permalink] [raw]
Subject: [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value

Without SoC specific PHY fixups the network interface on this board will
fail to work. Provide missing DT properties to make it work again.

Signed-off-by: Oleksij Rempel <[email protected]>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@ rgmii_phy: ethernet-phy@4 {
reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <1000>;
+ qca,smarteee-tw-us-1g = <24>;
+ qca,clk-out-frequency = <125000000>;
};
};
};
--
2.29.2


2021-05-11 12:50:17

by Andrew Lunn

[permalink] [raw]
Subject: Re: [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value

On Tue, May 11, 2021 at 06:30:39AM +0200, Oleksij Rempel wrote:
> Without SoC specific PHY fixups the network interface on this board will
> fail to work. Provide missing DT properties to make it work again.
>
> Signed-off-by: Oleksij Rempel <[email protected]>

Reviewed-by: Andrew Lunn <[email protected]>

Andrew