Changed V4:
revert separate schemas for each 'if' subset
add additionalProperties
move properties to top level
Changed V3:
remove select
change unevaluatedProperties
add separate schemas for each 'if' subset
Changed V2:
add rockchip,rk3328-grf-gpio.yaml
rename grf-gpio nodename
Johan Jonker (4):
dt-bindings: gpio: convert rk3328-grf-gpio.txt to YAML
dt-bindings: soc: rockchip: convert grf.txt to YAML
ARM: dts: rockchip: add grf register compatible for rk3066/rk3188
arm64: dts: rename grf-gpio nodename in rk3328.dtsi
.../bindings/gpio/rockchip,rk3328-grf-gpio.txt | 32 ---
.../bindings/gpio/rockchip,rk3328-grf-gpio.yaml | 51 +++++
.../devicetree/bindings/soc/rockchip/grf.txt | 61 -----
.../devicetree/bindings/soc/rockchip/grf.yaml | 246 +++++++++++++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
6 files changed, 299 insertions(+), 95 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml
--
2.11.0
Current dts files with RK3328 GRF 'gpio' nodes are manually verified.
In order to automate this process rk3328-grf-gpio.txt has to be
converted to YAML.
Rename 'grf-gpio' nodename to 'gpio'.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
---
.../bindings/gpio/rockchip,rk3328-grf-gpio.txt | 32 --------------
.../bindings/gpio/rockchip,rk3328-grf-gpio.yaml | 51 ++++++++++++++++++++++
2 files changed, 51 insertions(+), 32 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
deleted file mode 100644
index f9231df17..000000000
--- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Rockchip RK3328 GRF (General Register Files) GPIO controller.
-
-In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute
-control, can also be used for general purpose. It is manipulated by the
-GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can
-also be set in the same way.
-
-Currently this GPIO controller only supports the mute pin. If needed in the
-future, the HDMI pins support can also be added.
-
-Required properties:
-- compatible: Should contain "rockchip,rk3328-grf-gpio".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = Active high,
- 1 = Active low.
-
-Example:
-
- grf: syscon@ff100000 {
- compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
-
- grf_gpio: grf-gpio {
- compatible = "rockchip,rk3328-grf-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
-Note: The grf_gpio node should be declared as the child of the GRF (General
-Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>.
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
new file mode 100644
index 000000000..ea169f6fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3328 General Register Files GPIO controller
+
+description:
+ The Rockchip RK3328 General Register File (GRF) outputs only the
+ GPIO_MUTE pin, originally for codec mute control, but it can also be used
+ for general purpose. It is manipulated by the GRF_SOC_CON10 register.
+ If needed in the future support for the HDMI pins can also be added.
+ The GPIO node should be declared as the child of the GRF node.
+
+ The GPIO_MUTE pin is referred to in the format
+
+ <&grf_gpio 0 GPIO_ACTIVE_LOW>
+
+ The first cell is the pin number and
+ the second cell is used to specify the GPIO polarity
+ 0 = Active high
+ 1 = Active low
+
+maintainers:
+ - Heiko Stuebner <[email protected]>
+
+properties:
+ compatible:
+ const: rockchip,rk3328-grf-gpio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ grf_gpio: gpio {
+ compatible = "rockchip,rk3328-grf-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
--
2.11.0
Current dts files with 'grf' nodes are manually verified.
In order to automate this process grf.txt has to be
converted to YAML.
Most compatibility strings are in use with "simple-mfd" added.
Add description already in use:
"rockchip,rv1108-pmugrf", "syscon"
Add new descriptions for:
"rockchip,rk3568-grf", "syscon", "simple-mfd"
"rockchip,rk3568-pmugrf", "syscon", "simple-mfd"
Signed-off-by: Johan Jonker <[email protected]>
---
Changed V4:
revert separate schemas for each 'if' subset
add additionalProperties
move properties to top level
Changed V3:
remove select
change unevaluatedProperties
add separate schemas for each 'if' subset
Changed V2:
add rockchip,rk3328-grf-gpio.yaml
rename grf-gpio nodename
---
.../devicetree/bindings/soc/rockchip/grf.txt | 61 -----
.../devicetree/bindings/soc/rockchip/grf.yaml | 246 +++++++++++++++++++++
2 files changed, 246 insertions(+), 61 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
deleted file mode 100644
index f96511aa3..000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
- - "rockchip,px30-grf", "syscon": for px30
- - "rockchip,rk3036-grf", "syscon": for rk3036
- - "rockchip,rk3066-grf", "syscon": for rk3066
- - "rockchip,rk3188-grf", "syscon": for rk3188
- - "rockchip,rk3228-grf", "syscon": for rk3228
- - "rockchip,rk3288-grf", "syscon": for rk3288
- - "rockchip,rk3308-grf", "syscon": for rk3308
- - "rockchip,rk3328-grf", "syscon": for rk3328
- - "rockchip,rk3368-grf", "syscon": for rk3368
- - "rockchip,rk3399-grf", "syscon": for rk3399
- - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
- - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
- - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
- - "rockchip,px30-pmugrf", "syscon": for px30
- - "rockchip,rk3368-pmugrf", "syscon": for rk3368
- - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
- - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
- - "rockchip,px30-usb2phy-grf", "syscon": for px30
- - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
- - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
- pmugrf: syscon@ff320000 {
- compatible = "rockchip,rk3399-pmugrf", "syscon";
- reg = <0x0 0xff320000 0x0 0x1000>;
- };
-
- grf: syscon@ff770000 {
- compatible = "rockchip,rk3399-grf", "syscon";
- reg = <0x0 0xff770000 0x0 0x10000>;
- };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
new file mode 100644
index 000000000..8034458fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+ - Heiko Stuebner <[email protected]>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - rockchip,rk3066-grf
+ - rockchip,rk3188-grf
+ - rockchip,rk3288-sgrf
+ - rockchip,rv1108-pmugrf
+ - rockchip,rv1108-usbgrf
+ - const: syscon
+ - items:
+ - enum:
+ - rockchip,px30-grf
+ - rockchip,px30-pmugrf
+ - rockchip,px30-usb2phy-grf
+ - rockchip,rk3036-grf
+ - rockchip,rk3228-grf
+ - rockchip,rk3288-grf
+ - rockchip,rk3308-core-grf
+ - rockchip,rk3308-detect-grf
+ - rockchip,rk3308-grf
+ - rockchip,rk3328-grf
+ - rockchip,rk3328-usb2phy-grf
+ - rockchip,rk3368-grf
+ - rockchip,rk3368-pmugrf
+ - rockchip,rk3399-grf
+ - rockchip,rk3399-pmugrf
+ - rockchip,rk3568-grf
+ - rockchip,rk3568-pmugrf
+ - rockchip,rv1108-grf
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties:
+ type: object
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-grf
+
+ then:
+ properties:
+ lvds:
+ description:
+ Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-grf
+
+ then:
+ properties:
+ edp-phy:
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+
+ usbphy:
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3328-grf
+
+ then:
+ properties:
+ gpio:
+ type: object
+
+ $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+
+ unevaluatedProperties: false
+
+ power-controller:
+ type: object
+
+ $ref: "/schemas/power/rockchip,power-controller.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-grf
+
+ then:
+ properties:
+ mipi-dphy-rx0:
+ type: object
+
+ $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+
+ unevaluatedProperties: false
+
+ pcie-phy:
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+ patternProperties:
+ "phy@[0-9a-f]+$":
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-pmugrf
+ - rockchip,rk3036-grf
+ - rockchip,rk3308-grf
+ - rockchip,rk3368-pmugrf
+
+ then:
+ properties:
+ reboot-mode:
+ type: object
+
+ $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-usb2phy-grf
+ - rockchip,rk3228-grf
+ - rockchip,rk3328-usb2phy-grf
+ - rockchip,rk3399-grf
+ - rockchip,rv1108-grf
+
+ then:
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+ patternProperties:
+ "usb2-phy@[0-9a-f]+$":
+ type: object
+
+ $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-pmugrf
+ - rockchip,px30-grf
+ - rockchip,rk3228-grf
+ - rockchip,rk3288-grf
+ - rockchip,rk3328-grf
+ - rockchip,rk3368-pmugrf
+ - rockchip,rk3368-grf
+ - rockchip,rk3399-pmugrf
+ - rockchip,rk3399-grf
+
+ then:
+ properties:
+ io-domains:
+ description:
+ Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/rk3399-power.h>
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+ reg = <0xff770000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mipi_dphy_rx0: mipi-dphy-rx0 {
+ compatible = "rockchip,rk3399-mipi-dphy-rx0";
+ clocks = <&cru SCLK_MIPIDPHY_REF>,
+ <&cru SCLK_DPHY_RX0_CFG>,
+ <&cru PCLK_VIO_GRF>;
+ clock-names = "dphy-ref", "dphy-cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ #phy-cells = <0>;
+ };
+
+ u2phy0: usb2-phy@e450 {
+ compatible = "rockchip,rk3399-usb2phy";
+ reg = <0xe450 0x10>;
+ clocks = <&cru SCLK_USB2PHY0_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "clk_usbphy0_480m";
+ #phy-cells = <0>;
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "linestate";
+ };
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ };
+ };
+ };
--
2.11.0
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: syscon@ff100000:
grf-gpio: {'compatible': ['rockchip,rk3328-grf-gpio'],
'gpio-controller': True, '#gpio-cells': [[2]], 'phandle': [[68]]} is not
of type 'array'
Due to the regex "(?<!,nr)-gpios?$" anything that ends on
'-gpio', '-gpios' gives a match.
Rename 'grf-gpio' nodename to generic 'gpio'
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/gpio/gpio-consumer.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 4ce49aae7..2e458fb87 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -291,7 +291,7 @@
status = "disabled";
};
- grf_gpio: grf-gpio {
+ grf_gpio: gpio {
compatible = "rockchip,rk3328-grf-gpio";
gpio-controller;
#gpio-cells = <2>;
--
2.11.0
With the conversion of syscon.yaml minItems for compatibles
was set to 2. Current Rockchip rk3xxx.dtsi file only uses "syscon"
for the grf registers. Add "rockchip,rk3066-grf", "syscon"
compatible for rk3066/rk3188 to reduce notifications produced with:
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 755c946f1..c34bc59c9 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -256,7 +256,7 @@
};
grf: grf@20008000 {
- compatible = "syscon";
+ compatible = "rockchip,rk3066-grf", "syscon";
reg = <0x20008000 0x200>;
};
--
2.11.0
On Tue, May 11, 2021 at 7:05 AM Johan Jonker <[email protected]> wrote:
>
> Current dts files with RK3328 GRF 'gpio' nodes are manually verified.
> In order to automate this process rk3328-grf-gpio.txt has to be
> converted to YAML.
>
> Rename 'grf-gpio' nodename to 'gpio'.
>
> Signed-off-by: Johan Jonker <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> Reviewed-by: Linus Walleij <[email protected]>
> ---
Patch applied, thanks!
Bartosz
On Tue, 11 May 2021 07:05:09 +0200, Johan Jonker wrote:
> Current dts files with 'grf' nodes are manually verified.
> In order to automate this process grf.txt has to be
> converted to YAML.
>
> Most compatibility strings are in use with "simple-mfd" added.
>
> Add description already in use:
> "rockchip,rv1108-pmugrf", "syscon"
>
> Add new descriptions for:
> "rockchip,rk3568-grf", "syscon", "simple-mfd"
> "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
>
> Changed V4:
> revert separate schemas for each 'if' subset
> add additionalProperties
> move properties to top level
>
> Changed V3:
> remove select
> change unevaluatedProperties
> add separate schemas for each 'if' subset
>
> Changed V2:
> add rockchip,rk3328-grf-gpio.yaml
> rename grf-gpio nodename
> ---
> .../devicetree/bindings/soc/rockchip/grf.txt | 61 -----
> .../devicetree/bindings/soc/rockchip/grf.yaml | 246 +++++++++++++++++++++
> 2 files changed, 246 insertions(+), 61 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
> create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml
>
Reviewed-by: Rob Herring <[email protected]>