With grf.txt converted to YAML a lot of compatibles
did not have 'simple-mfd' added in the old binding.
That implies that if you have child nodes they need
to be documented.
Make the new layout fit for rk3066/rk3188,
move and restyle the grf nodes.
Remove rockchip,grf from usbphy node.
Add "#phy-cells", because it is a required property
by phy-provider.yaml
With the conversion of syscon.yaml minItems for compatibles
was set to 2. Current Rockchip rk3xxx.dtsi file only uses "syscon"
for the grf registers. Add "syscon", "simple-mfd"
compatible for rk3066/rk3188 to reduce notifications produced with:
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml
Changed compatibles:
"rockchip,rk3066-grf", "syscon", "simple-mfd"
"rockchip,rk3188-grf", "syscon", "simple-mfd"
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rk3066a.dtsi | 53 +++++++++++++++++++++++-------------------
arch/arm/boot/dts/rk3188.dtsi | 53 +++++++++++++++++++++++-------------------
arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
3 files changed, 59 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 8e087c34b..30dcf557e 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -266,30 +266,6 @@
status = "disabled";
};
- usbphy: phy {
- compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- usbphy0: usb-phy@17c {
- #phy-cells = <0>;
- reg = <0x17c>;
- clocks = <&cru SCLK_OTGPHY0>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
-
- usbphy1: usb-phy@188 {
- #phy-cells = <0>;
- reg = <0x188>;
- clocks = <&cru SCLK_OTGPHY1>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
- };
-
pinctrl: pinctrl {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
@@ -702,6 +678,35 @@
power-domains = <&power RK3066_PD_GPU>;
};
+&grf {
+ compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd";
+
+ usbphy: usbphy {
+ compatible = "rockchip,rk3066a-usb-phy",
+ "rockchip,rk3288-usb-phy";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy@17c {
+ reg = <0x17c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ usbphy1: usb-phy@188 {
+ reg = <0x188>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index f438170b4..41a912acb 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -214,30 +214,6 @@
};
};
- usbphy: phy {
- compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- usbphy0: usb-phy@10c {
- #phy-cells = <0>;
- reg = <0x10c>;
- clocks = <&cru SCLK_OTGPHY0>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
-
- usbphy1: usb-phy@11c {
- #phy-cells = <0>;
- reg = <0x11c>;
- clocks = <&cru SCLK_OTGPHY1>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
- };
-
pinctrl: pinctrl {
compatible = "rockchip,rk3188-pinctrl";
rockchip,grf = <&grf>;
@@ -637,6 +613,35 @@
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
};
+&grf{
+ compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
+
+ usbphy: usbphy {
+ compatible = "rockchip,rk3188-usb-phy",
+ "rockchip,rk3288-usb-phy";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy@10c {
+ reg = <0x10c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ usbphy1: usb-phy@11c {
+ reg = <0x11c>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+ };
+};
+
&gpu {
compatible = "rockchip,rk3188-mali", "arm,mali-400";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 755c946f1..d473552e8 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -256,7 +256,7 @@
};
grf: grf@20008000 {
- compatible = "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x20008000 0x200>;
};
--
2.11.0