The two clocks "main-source" and "main-sel" are not present in the
driver and not defined in the binding documentation. Remove them
as they are not used and not described in the documentation.
Signed-off-by: Fabien Parent <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8516.dtsi | 27 ++++++------------------
1 file changed, 6 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index bbe5a1419eff..d1b67c82d761 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -345,14 +345,9 @@ i2c0: i2c@11009000 {
reg = <0 0x11009000 0 0x90>,
<0 0x11000180 0 0x80>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
- <&infracfg CLK_IFR_I2C0_SEL>,
- <&topckgen CLK_TOP_I2C0>,
+ clocks = <&topckgen CLK_TOP_I2C0>,
<&topckgen CLK_TOP_APDMA>;
- clock-names = "main-source",
- "main-sel",
- "main",
- "dma";
+ clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -364,14 +359,9 @@ i2c1: i2c@1100a000 {
reg = <0 0x1100a000 0 0x90>,
<0 0x11000200 0 0x80>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
- <&infracfg CLK_IFR_I2C1_SEL>,
- <&topckgen CLK_TOP_I2C1>,
+ clocks = <&topckgen CLK_TOP_I2C1>,
<&topckgen CLK_TOP_APDMA>;
- clock-names = "main-source",
- "main-sel",
- "main",
- "dma";
+ clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -383,14 +373,9 @@ i2c2: i2c@1100b000 {
reg = <0 0x1100b000 0 0x90>,
<0 0x11000280 0 0x80>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
- <&infracfg CLK_IFR_I2C2_SEL>,
- <&topckgen CLK_TOP_I2C2>,
+ clocks = <&topckgen CLK_TOP_I2C2>,
<&topckgen CLK_TOP_APDMA>;
- clock-names = "main-source",
- "main-sel",
- "main",
- "dma";
+ clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
--
2.31.1