2021-05-21 20:26:50

by Alexandru Ardelean

[permalink] [raw]
Subject: [PATCH] gpio: gpio-xgene: simplify probe, return devm_gpiochip_add_data() directly

The handling of the return value from devm_gpiochip_add_data() is a bit
redundant. It prints messages on error and success cases.
While the success message may be useful, it is more in the area of log
spam, and these can be printed with other forms of kernel logging.

This change does a direct return with devm_gpiochip_add_data() in the probe
function.

The platform_set_drvdata() is needed, as this driver uses the stored
private date in the PM suspend/resume routines.

Signed-off-by: Alexandru Ardelean <[email protected]>
---
drivers/gpio/gpio-xgene.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c
index 532b0df8a1f2..fb4b0c67aeef 100644
--- a/drivers/gpio/gpio-xgene.c
+++ b/drivers/gpio/gpio-xgene.c
@@ -159,7 +159,6 @@ static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume);
static int xgene_gpio_probe(struct platform_device *pdev)
{
struct xgene_gpio *gpio;
- int err = 0;

gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
@@ -183,15 +182,7 @@ static int xgene_gpio_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, gpio);

- err = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
- if (err) {
- dev_err(&pdev->dev,
- "failed to register gpiochip.\n");
- return err;
- }
-
- dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n");
- return 0;
+ return devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
}

static const struct of_device_id xgene_gpio_of_match[] = {
--
2.31.1


2021-05-23 18:32:37

by Bartosz Golaszewski

[permalink] [raw]
Subject: Re: [PATCH] gpio: gpio-xgene: simplify probe, return devm_gpiochip_add_data() directly

On Fri, May 21, 2021 at 8:10 PM Alexandru Ardelean
<[email protected]> wrote:
>
> The handling of the return value from devm_gpiochip_add_data() is a bit
> redundant. It prints messages on error and success cases.
> While the success message may be useful, it is more in the area of log
> spam, and these can be printed with other forms of kernel logging.
>
> This change does a direct return with devm_gpiochip_add_data() in the probe
> function.
>
> The platform_set_drvdata() is needed, as this driver uses the stored
> private date in the PM suspend/resume routines.
>
> Signed-off-by: Alexandru Ardelean <[email protected]>
> ---
> drivers/gpio/gpio-xgene.c | 11 +----------
> 1 file changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c
> index 532b0df8a1f2..fb4b0c67aeef 100644
> --- a/drivers/gpio/gpio-xgene.c
> +++ b/drivers/gpio/gpio-xgene.c
> @@ -159,7 +159,6 @@ static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume);
> static int xgene_gpio_probe(struct platform_device *pdev)
> {
> struct xgene_gpio *gpio;
> - int err = 0;
>
> gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> if (!gpio)
> @@ -183,15 +182,7 @@ static int xgene_gpio_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, gpio);
>
> - err = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
> - if (err) {
> - dev_err(&pdev->dev,
> - "failed to register gpiochip.\n");
> - return err;
> - }
> -
> - dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n");
> - return 0;
> + return devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
> }
>
> static const struct of_device_id xgene_gpio_of_match[] = {
> --
> 2.31.1
>

Applied, thanks.

For the future: the subject should be: "gpio: xgene: ..." here and
everywhere else.

Bart

2021-05-24 07:22:41

by Alexandru Ardelean

[permalink] [raw]
Subject: Re: [PATCH] gpio: gpio-xgene: simplify probe, return devm_gpiochip_add_data() directly

On Sun, 23 May 2021 at 21:31, Bartosz Golaszewski
<[email protected]> wrote:
>
> On Fri, May 21, 2021 at 8:10 PM Alexandru Ardelean
> <[email protected]> wrote:
> >
> > The handling of the return value from devm_gpiochip_add_data() is a bit
> > redundant. It prints messages on error and success cases.
> > While the success message may be useful, it is more in the area of log
> > spam, and these can be printed with other forms of kernel logging.
> >
> > This change does a direct return with devm_gpiochip_add_data() in the probe
> > function.
> >
> > The platform_set_drvdata() is needed, as this driver uses the stored
> > private date in the PM suspend/resume routines.
> >
> > Signed-off-by: Alexandru Ardelean <[email protected]>
> > ---
> > drivers/gpio/gpio-xgene.c | 11 +----------
> > 1 file changed, 1 insertion(+), 10 deletions(-)
> >
> > diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c
> > index 532b0df8a1f2..fb4b0c67aeef 100644
> > --- a/drivers/gpio/gpio-xgene.c
> > +++ b/drivers/gpio/gpio-xgene.c
> > @@ -159,7 +159,6 @@ static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume);
> > static int xgene_gpio_probe(struct platform_device *pdev)
> > {
> > struct xgene_gpio *gpio;
> > - int err = 0;
> >
> > gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> > if (!gpio)
> > @@ -183,15 +182,7 @@ static int xgene_gpio_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, gpio);
> >
> > - err = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
> > - if (err) {
> > - dev_err(&pdev->dev,
> > - "failed to register gpiochip.\n");
> > - return err;
> > - }
> > -
> > - dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n");
> > - return 0;
> > + return devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
> > }
> >
> > static const struct of_device_id xgene_gpio_of_match[] = {
> > --
> > 2.31.1
> >
>
> Applied, thanks.
>
> For the future: the subject should be: "gpio: xgene: ..." here and
> everywhere else.

ack
will keep that in mind

thanks :)
Alex

>
> Bart