This patch series contains change to move sdc pinconf from SoC specific
DT file to board specific DT file. It also contain change to set sdc
GPIO pin to bias-pull up
Tested sd card working on sc7180 based board
Changes in v2:
- added pull-up for IDP
Sujit Kautkar (2):
arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 102 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 -------------------
3 files changed, 204 insertions(+), 102 deletions(-)
--
2.31.1.818.g46aad6cb9e-goog