There is issue with simple sound card, the simple sound
card can't configure the pll of codec.
[ 115.352669] wm8960 1-001a: failed to configure clock
[ 115.358843] wm8960 1-001a: ASoC: error at snd_soc_dai_hw_params on wm8960-hifi: -22
So Switch to fsl-asoc-card and the fsl-asoc-card can support
asrc module as front-end component.
Signed-off-by: Shengjiu Wang <[email protected]>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 50 +++++++++++--------------
1 file changed, 21 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 5a1e10def6ef..779cc536566d 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -60,38 +60,26 @@ reg_can_3v3: regulator-can-3v3 {
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
};
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "mx6ul-wm8960";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink_master>;
- simple-audio-card,frame-master = <&dailink_master>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Line", "Line In",
- "Line", "Line Out",
- "Speaker", "Speaker",
- "Headphone", "Headphone Jack";
- simple-audio-card,routing =
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai2>;
+ audio-codec = <&codec>;
+ audio-asrc = <&asrc>;
+ hp-det-gpio = <&gpio5 4 0>;
+ audio-routing =
"Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",
- "Speaker", "SPK_LP",
- "Speaker", "SPK_LN",
- "Speaker", "SPK_RP",
- "Speaker", "SPK_RN",
- "LINPUT1", "Mic Jack",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT2", "Mic Jack",
"LINPUT3", "Mic Jack",
- "RINPUT1", "Mic Jack",
- "RINPUT2", "Mic Jack";
-
- simple-audio-card,cpu {
- sound-dai = <&sai2>;
- };
-
- dailink_master: simple-audio-card,codec {
- sound-dai = <&codec>;
- clocks = <&clks IMX6UL_CLK_SAI2>;
- };
+ "RINPUT1", "AMIC",
+ "RINPUT2", "AMIC",
+ "Mic Jack", "MICB",
+ "AMIC", "MICB";
};
spi4 {
@@ -145,6 +133,10 @@ codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
wlf,shared-lrclk;
+ wlf,hp-cfg = <3 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ clock-names = "mclk";
};
camera@3c {
--
2.27.0
Hi,
thanks for the patch.
On 21-04-29 10:52, Shengjiu Wang wrote:
> There is issue with simple sound card, the simple sound
> card can't configure the pll of codec.
Hm, than we should fix this rather than moving to the 'old'
'fsl,imx-audio-wm8960'. But that only my opinion.
Regards,
Marco
On Thu, Apr 29, 2021 at 3:09 PM Marco Felsch <[email protected]> wrote:
>
> Hi,
>
> thanks for the patch.
>
> On 21-04-29 10:52, Shengjiu Wang wrote:
> > There is issue with simple sound card, the simple sound
> > card can't configure the pll of codec.
>
> Hm, than we should fix this rather than moving to the 'old'
> 'fsl,imx-audio-wm8960'. But that only my opinion.
>
Thanks for your comments.
But fsl-asoc-card is better than simple sound card, it not only
avoids the pll error but also supports the ASRC module.
And this patch is to use the same machine driver as the imx6qdl
platform.
Best regards
Wang shengjiu
On Thu, Apr 29, 2021 at 10:52:19AM +0800, Shengjiu Wang wrote:
> There is issue with simple sound card, the simple sound
> card can't configure the pll of codec.
>
> [ 115.352669] wm8960 1-001a: failed to configure clock
> [ 115.358843] wm8960 1-001a: ASoC: error at snd_soc_dai_hw_params on wm8960-hifi: -22
>
> So Switch to fsl-asoc-card and the fsl-asoc-card can support
> asrc module as front-end component.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
Changed subject prefix to "ARM: dts: imx6ul-14x14-evk: " when applying.
Shawn
On Thu, Apr 29, 2021 at 10:52:19AM +0800, Shengjiu Wang wrote:
> There is issue with simple sound card, the simple sound
> card can't configure the pll of codec.
>
> [ 115.352669] wm8960 1-001a: failed to configure clock
> [ 115.358843] wm8960 1-001a: ASoC: error at snd_soc_dai_hw_params on wm8960-hifi: -22
>
> So Switch to fsl-asoc-card and the fsl-asoc-card can support
> asrc module as front-end component.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
Applied, thanks.