changes v3:
- split arch and dts changes
changes v2:
- rebase against latest kernel
- fix networking on RIoTBoard
This patch series tries to remove most of the imx6 and imx7 board
specific PHY configuration via fixup, as this breaks the PHYs when
connected to switch chips or USB Ethernet MACs.
Each patch has the possibility to break boards, but contains a
recommendation to fix the problem in a more portable and future-proof
way.
Oleksij Rempel (2):
ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE
value
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
--
2.29.2
On Tue, May 11, 2021 at 06:30:37AM +0200, Oleksij Rempel wrote:
> changes v3:
> - split arch and dts changes
>
> changes v2:
> - rebase against latest kernel
> - fix networking on RIoTBoard
>
> This patch series tries to remove most of the imx6 and imx7 board
> specific PHY configuration via fixup, as this breaks the PHYs when
> connected to switch chips or USB Ethernet MACs.
>
> Each patch has the possibility to break boards, but contains a
> recommendation to fix the problem in a more portable and future-proof
> way.
>
> Oleksij Rempel (2):
> ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
> ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE
> value
Applied both, thanks.