max77802_set_ramp_delay_2bit() returns -EINVAL when id > MAX77802_BUCK4.
This was a leftover in commit b0615f1da543
("regulator: max77802: Split regulator operations for BUCKs").
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/max77802-regulator.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 7b8ec8c0bd15..903c6fc10efb 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -345,7 +345,6 @@ static const struct regulator_ops max77802_buck_dvs_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = max77802_set_ramp_delay_2bit,
.set_suspend_disable = max77802_set_suspend_disable,
};
--
2.25.1
Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/max77802-regulator.c | 69 +++++---------------------
1 file changed, 12 insertions(+), 57 deletions(-)
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 903c6fc10efb..21e0eb0f43f9 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -43,15 +43,14 @@
#define MAX77802_OFF_PWRREQ 0x1
#define MAX77802_LP_PWRREQ 0x2
-/* MAX77802 has two register formats: 2-bit and 4-bit */
-static const unsigned int ramp_table_77802_2bit[] = {
+static const unsigned int max77802_buck234_ramp_table[] = {
12500,
25000,
50000,
100000,
};
-static unsigned int ramp_table_77802_4bit[] = {
+static const unsigned int max77802_buck16_ramp_table[] = {
1000, 2000, 3030, 4000,
5000, 5880, 7140, 8330,
9090, 10000, 11110, 12500,
@@ -221,58 +220,6 @@ static int max77802_enable(struct regulator_dev *rdev)
max77802->opmode[id] << shift);
}
-static int max77802_find_ramp_value(struct regulator_dev *rdev,
- const unsigned int limits[], int size,
- unsigned int ramp_delay)
-{
- int i;
-
- for (i = 0; i < size; i++) {
- if (ramp_delay <= limits[i])
- return i;
- }
-
- /* Use maximum value for no ramp control */
- dev_warn(&rdev->dev, "%s: ramp_delay: %d not supported, setting 100000\n",
- rdev->desc->name, ramp_delay);
- return size - 1;
-}
-
-/* Used for BUCKs 2-4 */
-static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev,
- int ramp_delay)
-{
- int id = rdev_get_id(rdev);
- unsigned int ramp_value;
-
- if (id > MAX77802_BUCK4) {
- dev_warn(&rdev->dev,
- "%s: regulator: ramp delay not supported\n",
- rdev->desc->name);
- return -EINVAL;
- }
- ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit,
- ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay);
-
- return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- MAX77802_RAMP_RATE_MASK_2BIT,
- ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT);
-}
-
-/* For BUCK1, 6 */
-static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev,
- int ramp_delay)
-{
- unsigned int ramp_value;
-
- ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit,
- ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay);
-
- return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- MAX77802_RAMP_RATE_MASK_4BIT,
- ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT);
-}
-
/*
* LDOs 2, 4-19, 22-35
*/
@@ -316,7 +263,7 @@ static const struct regulator_ops max77802_buck_16_dvs_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = max77802_set_ramp_delay_4bit,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
.set_suspend_disable = max77802_set_suspend_disable,
};
@@ -330,7 +277,7 @@ static const struct regulator_ops max77802_buck_234_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
.set_suspend_disable = max77802_set_suspend_disable,
.set_suspend_mode = max77802_set_suspend_mode,
};
@@ -408,6 +355,10 @@ static const struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_DVS_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .ramp_reg = MAX77802_REG_BUCK ## num ## CTRL, \
+ .ramp_mask = MAX77802_RAMP_RATE_MASK_4BIT, \
+ .ramp_delay_table = max77802_buck16_ramp_table, \
+ .n_ramp_values = ARRAY_SIZE(max77802_buck16_ramp_table), \
.of_map_mode = max77802_map_mode, \
}
@@ -430,6 +381,10 @@ static const struct regulator_ops max77802_buck_dvs_ops = {
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
.enable_mask = MAX77802_OPMODE_MASK << \
MAX77802_OPMODE_BUCK234_SHIFT, \
+ .ramp_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
+ .ramp_mask = MAX77802_RAMP_RATE_MASK_2BIT, \
+ .ramp_delay_table = max77802_buck234_ramp_table, \
+ .n_ramp_values = ARRAY_SIZE(max77802_buck234_ramp_table), \
.of_map_mode = max77802_map_mode, \
}
--
2.25.1
On Sun, 23 May 2021 15:23:19 +0800, Axel Lin wrote:
> max77802_set_ramp_delay_2bit() returns -EINVAL when id > MAX77802_BUCK4.
> This was a leftover in commit b0615f1da543
> ("regulator: max77802: Split regulator operations for BUCKs").
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: max77802: Remove .set_ramp_delay from max77802_buck_dvs_ops
commit: 8f4ef0788c68bf99370a91df5cb83f90d707583e
[2/2] regulator: max77802: Convert to use regulator_set_ramp_delay_regmap
commit: 8cdded982a6cf95d5ed7e3a014fb3d8dde6b3a94
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark