The vdec IP block of RK322x is the same as RK3399 has and the driver can
be used as-is.
Add the respective node to the device tree.
Note: core and cabac clock need to be set to a specific rate which is
done by using "assigned-clocks" / "assigned-clock-rates" properties
(axi clock rate is currently set in the driver).
Signed-off-by: Alex Bee <[email protected]>
---
arch/arm/boot/dts/rk322x.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 62d1113b7804..13c2f92ac013 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -633,6 +633,19 @@ vpu_mmu: iommu@20020800 {
#iommu-cells = <0>;
};
+ vdec: video-codec@20030000 {
+ compatible = "rockchip,rk3228-vdec", "rockchip,rk3399-vdec";
+ reg = <0x20030000 0x480>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+ clock-names = "axi", "ahb", "cabac", "core";
+ assigned-clocks = <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+ assigned-clock-rates = <300000000>, <300000000>;
+ power-domains = <&power RK3228_PD_RKVDEC>;
+ iommus = <&vdec_mmu>;
+ };
+
vdec_mmu: iommu@20030480 {
compatible = "rockchip,iommu";
reg = <0x20030480 0x40>, <0x200304c0 0x40>;
@@ -641,7 +654,6 @@ vdec_mmu: iommu@20030480 {
clock-names = "aclk", "iface";
power-domains = <&power RK3228_PD_RKVDEC>;
#iommu-cells = <0>;
- status = "disabled";
};
vop: vop@20050000 {
--
2.27.0