This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.
It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I'll send the sensor driver I'm using (that will use this code via the
imx8mq-librem5 board) later, if that's ok.
Thanks Laurent, who helped a lot. I'm happy for any feedback,
martin
Martin Kepplinger (3):
dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
controller
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 151 +++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 102 ++
drivers/staging/media/imx/Makefile | 1 +
drivers/staging/media/imx/imx8mq-mipi-csi2.c | 1023 +++++++++++++++++
4 files changed, 1277 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c
--
2.30.2