This is the start of the stable review cycle for the 5.10.42 release.
There are 252 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.42-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.42-rc1
Chunfeng Yun <[email protected]>
usb: core: reduce power-on-good delay time of root hub
Chinmay Agarwal <[email protected]>
neighbour: Prevent Race condition in neighbour subsytem
Masahiro Yamada <[email protected]>
scripts/clang-tools: switch explicitly to Python 3
Johan Hovold <[email protected]>
net: hso: bail out on interrupt URB allocation failure
Greg Kroah-Hartman <[email protected]>
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
Trond Myklebust <[email protected]>
SUNRPC: More fixes for backlog congestion
Liu Jian <[email protected]>
bpftool: Add sock_release help info for cgroup attach/prog load command
Yunsheng Lin <[email protected]>
net: hns3: check the return of skb_checksum_help()
Magnus Karlsson <[email protected]>
samples/bpf: Consider frame size in tx_only of xdpsock sample
Greg Kroah-Hartman <[email protected]>
i915: fix build warning in intel_dp_get_link_status()
Stefan Chulski <[email protected]>
net: mvpp2: add buffer header handling in RX
Vlad Buslov <[email protected]>
net: zero-initialize tc skb extension on allocation
Randy Dunlap <[email protected]>
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
Randy Dunlap <[email protected]>
MIPS: alchemy: xxs1500: add gpio-au1000.h header file
George McCollister <[email protected]>
net: hsr: fix mac_len checks
Taehee Yoo <[email protected]>
sch_dsmark: fix a NULL deref in qdisc_reset()
Stefan Roese <[email protected]>
net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88
kernel test robot <[email protected]>
ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
Francesco Ruggeri <[email protected]>
ipv6: record frag_max_size in atomic fragments in input path
Aleksander Jan Bajkowski <[email protected]>
net: lantiq: fix memory corruption in RX ring
Dan Carpenter <[email protected]>
scsi: libsas: Use _safe() loop in sas_resume_port()
Stephen Boyd <[email protected]>
ASoC: qcom: lpass-cpu: Use optional clk APIs
Jesse Brandeburg <[email protected]>
ixgbe: fix large MTU request from VF
Jussi Maki <[email protected]>
bpf: Set mac_len in bpf_skb_change_head
Yinjun Zhang <[email protected]>
bpf, offload: Reorder offload callback 'prepare' in verifier
Dan Carpenter <[email protected]>
ASoC: cs35l33: fix an error code in probe()
Dan Carpenter <[email protected]>
staging: emxx_udc: fix loop in _nbu2ss_nuke()
Raju Rangoju <[email protected]>
cxgb4: avoid accessing registers when clearing filters
Lu Baolu <[email protected]>
iommu/vt-d: Use user privilege for RID2PASID translation
Jian Shen <[email protected]>
net: hns3: put off calling register_netdev() until client initialize complete
Jiaran Zhang <[email protected]>
net: hns3: fix incorrect resp_msg issue
Bixuan Cui <[email protected]>
iommu/virtio: Add missing MODULE_DEVICE_TABLE
David Awogbemila <[email protected]>
gve: Correct SKB queue index validation.
Catherine Sullivan <[email protected]>
gve: Upgrade memory barrier in poll routine
David Awogbemila <[email protected]>
gve: Add NULL pointer checks when freeing irqs.
David Awogbemila <[email protected]>
gve: Update mgmt_msix_idx if num_ntfy changes
Catherine Sullivan <[email protected]>
gve: Check TX QPL was actually assigned
Julian Wiedmann <[email protected]>
net/smc: remove device from smcd_dev_list after failed device_add()
Taehee Yoo <[email protected]>
mld: fix panic in mld_newpack()
Michael Chan <[email protected]>
bnxt_en: Fix context memory setup for 64K page size.
Andy Gospodarek <[email protected]>
bnxt_en: Include new P5 HV definition in VF check.
Zhen Lei <[email protected]>
net: bnx2: Fix error return code in bnx2_init_board()
Dan Carpenter <[email protected]>
net: hso: check for allocation failure in hso_create_bulk_serial_device()
Yunsheng Lin <[email protected]>
net: sched: fix tx action reschedule issue with stopped queue
Yunsheng Lin <[email protected]>
net: sched: fix tx action rescheduling issue during deactivation
Yunsheng Lin <[email protected]>
net: sched: fix packet stuck problem for lockless qdisc
Jim Ma <[email protected]>
tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
Tao Liu <[email protected]>
openvswitch: meter: fix race when getting now_ms.
Ayush Sawal <[email protected]>
cxgb4/ch_ktls: Clear resources when pf4 device is removed
Christophe JAILLET <[email protected]>
net: mdio: octeon: Fix some double free issues
Christophe JAILLET <[email protected]>
net: mdio: thunder: Fix a double free issue in the .remove function
Dan Carpenter <[email protected]>
chelsio/chtls: unlock on error in chtls_pt_recvmsg()
Fugang Duan <[email protected]>
net: fec: fix the potential memory leak in fec_enet_init()
Richard Sanger <[email protected]>
net: packetmmap: fix only tx timestamp on request
Paolo Abeni <[email protected]>
net: really orphan skbs tied to closing sk
Andy Shevchenko <[email protected]>
spi: Assume GPIO CS active high in ACPI case
Eric Farman <[email protected]>
vfio-ccw: Check initialized flag in cp_init()
Alex Elder <[email protected]>
net: ipa: memory region array is variable size
Joakim Zhang <[email protected]>
net: stmmac: Fix MAC WoL not working if PHY does not support WoL
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Regmap must use_single_read/write
Zou Wei <[email protected]>
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
Subbaraman Narayanamurthy <[email protected]>
interconnect: qcom: bcm-voter: add a missing of_node_put()
Vladimir Oltean <[email protected]>
net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count
Christophe JAILLET <[email protected]>
net: netcp: Fix an error message
Rikard Falkeborn <[email protected]>
linux/bits.h: fix compilation error with GENMASK
Gulam Mohamed <[email protected]>
block: fix a race between del_gendisk and BLKRRPART
Hans de Goede <[email protected]>
platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet
Christian König <[email protected]>
drm/amdgpu: stop touching sched.ready in the backend
Lang Yu <[email protected]>
drm/amd/amdgpu: fix a potential deadlock in gpu reset
xinhui pan <[email protected]>
drm/amdgpu: Fix a use-after-free
Jingwen Chen <[email protected]>
drm/amd/amdgpu: fix refcount leak
Chris Park <[email protected]>
drm/amd/display: Disconnect non-DP with no EDID
Steve French <[email protected]>
SMB3: incorrect file id in requests compounded with open
Teava Radu <[email protected]>
platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet
Andy Shevchenko <[email protected]>
platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
Shyam Sundar S K <[email protected]>
platform/x86: hp-wireless: add AMD's hardware id to the supported list
Josef Bacik <[email protected]>
btrfs: do not BUG_ON in link_to_fixup_dir
Filipe Manana <[email protected]>
btrfs: release path before starting transaction when cloning inline extent
Ajish Koshy <[email protected]>
scsi: pm80xx: Fix drives missing during rmmod/insmod loop
Peter Zijlstra <[email protected]>
openrisc: Define memory barrier mb
Matt Wang <[email protected]>
scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic
Peter Wang <[email protected]>
scsi: ufs: ufs-mediatek: Fix power down spec violation
Boris Burkov <[email protected]>
btrfs: return whole extents in fiemap
Greg Kroah-Hartman <[email protected]>
brcmfmac: properly check for bus register errors
Greg Kroah-Hartman <[email protected]>
Revert "brcmfmac: add a check for the status of usb_register"
Tom Seewald <[email protected]>
net: liquidio: Add missing null pointer checks
Greg Kroah-Hartman <[email protected]>
Revert "net: liquidio: fix a NULL pointer dereference"
Greg Kroah-Hartman <[email protected]>
media: gspca: properly check for errors in po1030_probe()
Greg Kroah-Hartman <[email protected]>
Revert "media: gspca: Check the return value of write_bridge for timeout"
Alaa Emad <[email protected]>
media: gspca: mt9m111: Check write_bridge for timeout
Greg Kroah-Hartman <[email protected]>
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
Alaa Emad <[email protected]>
media: dvb: Add check on sp8870_readreg return
Greg Kroah-Hartman <[email protected]>
Revert "media: dvb: Add check on sp8870_readreg"
Greg Kroah-Hartman <[email protected]>
ASoC: cs43130: handle errors in cs43130_probe() properly
Greg Kroah-Hartman <[email protected]>
Revert "ASoC: cs43130: fix a NULL pointer dereference"
Greg Kroah-Hartman <[email protected]>
libertas: register sysfs groups properly
Greg Kroah-Hartman <[email protected]>
Revert "libertas: add checks for the return value of sysfs_create_group"
Phillip Potter <[email protected]>
dmaengine: qcom_hidma: comment platform_driver_register call
Greg Kroah-Hartman <[email protected]>
Revert "dmaengine: qcom_hidma: Check for driver register failure"
Phillip Potter <[email protected]>
isdn: mISDN: correctly handle ph_info allocation failure in hfcsusb_ph_info
Greg Kroah-Hartman <[email protected]>
Revert "isdn: mISDN: Fix potential NULL pointer dereference of kzalloc"
Anirudh Rayabharam <[email protected]>
ath6kl: return error code in ath6kl_wmi_set_roam_lrssi_cmd()
Greg Kroah-Hartman <[email protected]>
Revert "ath6kl: return error code in ath6kl_wmi_set_roam_lrssi_cmd()"
Phillip Potter <[email protected]>
isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io
Greg Kroah-Hartman <[email protected]>
Revert "isdn: mISDNinfineon: fix potential NULL pointer dereference"
Greg Kroah-Hartman <[email protected]>
Revert "ALSA: usx2y: Fix potential NULL pointer dereference"
Atul Gopinathan <[email protected]>
ALSA: sb8: Add a comment note regarding an unused pointer
Greg Kroah-Hartman <[email protected]>
Revert "ALSA: gus: add a check of the status of snd_ctl_add"
Tom Seewald <[email protected]>
char: hpet: add checks after calling ioremap
Greg Kroah-Hartman <[email protected]>
Revert "char: hpet: fix a missing check of ioremap"
Du Cheng <[email protected]>
net: caif: remove BUG_ON(dev == NULL) in caif_xmit
Greg Kroah-Hartman <[email protected]>
Revert "net: caif: replace BUG_ON with recovery code"
Anirudh Rayabharam <[email protected]>
net/smc: properly handle workqueue allocation failure
Greg Kroah-Hartman <[email protected]>
Revert "net/smc: fix a NULL pointer dereference"
Anirudh Rayabharam <[email protected]>
net: fujitsu: fix potential null-ptr-deref
Greg Kroah-Hartman <[email protected]>
Revert "net: fujitsu: fix a potential NULL pointer dereference"
Atul Gopinathan <[email protected]>
serial: max310x: unregister uart driver in case of failure and abort
Greg Kroah-Hartman <[email protected]>
Revert "serial: max310x: pass return value of spi_register_driver"
Greg Kroah-Hartman <[email protected]>
Revert "ALSA: sb: fix a missing check of snd_ctl_add"
Greg Kroah-Hartman <[email protected]>
Revert "media: usb: gspca: add a missed check for goto_low_power"
Greg Kroah-Hartman <[email protected]>
Revert "crypto: cavium/nitrox - add an error message to explain the failure of pci_request_mem_regions"
Zou Wei <[email protected]>
gpio: cadence: Add missing MODULE_DEVICE_TABLE
Kai-Heng Feng <[email protected]>
platform/x86: hp_accel: Avoid invoking _INI to speed up resume
Paolo Abeni <[email protected]>
mptcp: fix data stream corruption
Paolo Abeni <[email protected]>
mptcp: drop unconditional pr_warn on bad opt
Paolo Abeni <[email protected]>
mptcp: avoid error message on infinite mapping
Hou Pu <[email protected]>
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
Felix Fietkau <[email protected]>
perf jevents: Fix getting maximum number of fds
David Howells <[email protected]>
afs: Fix the nlink handling of dir-over-dir rename
Geert Uytterhoeven <[email protected]>
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
Jean Delvare <[email protected]>
i2c: i801: Don't generate an interrupt on bus reset
Qii Wang <[email protected]>
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
Krzysztof Kozlowski <[email protected]>
i2c: s3c2410: fix possible NULL pointer deref on read message after write
Vladimir Oltean <[email protected]>
net: dsa: sja1105: fix VL lookup command packing for P/Q/R/S
Vladimir Oltean <[email protected]>
net: dsa: sja1105: call dsa_unregister_switch when allocating memory fails
Vladimir Oltean <[email protected]>
net: dsa: sja1105: add error handling in sja1105_setup()
Vladimir Oltean <[email protected]>
net: dsa: sja1105: error out on unsupported PHY mode
Vladimir Oltean <[email protected]>
net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic
Vladimir Oltean <[email protected]>
net: dsa: sja1105: update existing VLANs from the bridge VLAN list
Dan Carpenter <[email protected]>
net: dsa: fix a crash if ->get_sset_count() fails
DENG Qingfang <[email protected]>
net: dsa: mt7530: fix VLAN traffic leaks
Roi Dayan <[email protected]>
netfilter: flowtable: Remove redundant hw refresh bit
Christophe JAILLET <[email protected]>
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
Xin Long <[email protected]>
tipc: skb_linearize the head skb when reassembling msgs
Xin Long <[email protected]>
tipc: wait and exit until all work queues are done
Hoang Le <[email protected]>
Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"
NeilBrown <[email protected]>
SUNRPC in case of backlog, hand free slots directly to waiting task
Ariel Levkovich <[email protected]>
net/mlx5: Set term table as an unmanaged flow table
Vladyslav Tarasiuk <[email protected]>
net/mlx4: Fix EEPROM dump support
Roi Dayan <[email protected]>
net/mlx5e: Fix null deref accessing lag dev
Jianbo Liu <[email protected]>
net/mlx5: Set reformat action when needed for termination rules
Dima Chumak <[email protected]>
net/mlx5e: Fix nullptr in add_vlan_push_action()
Eli Cohen <[email protected]>
{net,vdpa}/mlx5: Configure interface MAC into mpfs L2 table
Aya Levin <[email protected]>
net/mlx5e: Fix error path of updating netdev queues
Dima Chumak <[email protected]>
net/mlx5e: Fix multipath lag activation
Saeed Mahameed <[email protected]>
net/mlx5e: reset XPS on error flow if netdev isn't registered yet
Neil Armstrong <[email protected]>
drm/meson: fix shutdown crash when component not probed
Zhang Xiaoxu <[email protected]>
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
Trond Myklebust <[email protected]>
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
Trond Myklebust <[email protected]>
NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
Dan Carpenter <[email protected]>
NFS: fix an incorrect limit in filelayout_decode_layout()
zhouchuangao <[email protected]>
fs/nfs: Use fatal_signal_pending instead of signal_pending
Thadeu Lima de Souza Cascardo <[email protected]>
Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
Pavel Skripkin <[email protected]>
net: usb: fix memory leak in smsc75xx_bind
Bjorn Andersson <[email protected]>
usb: typec: mux: Fix matching with typec_altmode_desc
Yoshihiro Shimoda <[email protected]>
usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Properly track pending and queued SG
Srinivas Pandruvada <[email protected]>
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
Zolton Jheng <[email protected]>
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
Dominik Andreas Schorpp <[email protected]>
USB: serial: ftdi_sio: add IDs for IDS GmbH Products
Daniele Palmas <[email protected]>
USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
Sean MacLennan <[email protected]>
USB: serial: ti_usb_3410_5052: add startech.com device id
Zheyu Ma <[email protected]>
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
Geert Uytterhoeven <[email protected]>
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
Colin Ian King <[email protected]>
serial: tegra: Fix a mask operation that is always true
Rafael J. Wysocki <[email protected]>
drivers: base: Fix device link removal
Alan Stern <[email protected]>
USB: usbfs: Don't WARN about excessively large memory allocations
Zhu Lingshan <[email protected]>
Revert "irqbypass: do not start cons/prod when failed connect"
Johan Hovold <[email protected]>
USB: trancevibrator: fix control-request direction
Christian Gmeiner <[email protected]>
serial: 8250_pci: handle FL_NOIRQ board flag
Randy Wright <[email protected]>
serial: 8250_pci: Add support for new HPE serial device
Maximilian Luz <[email protected]>
serial: 8250_dw: Add device HID for new AMD UART controller
Andrew Jeffery <[email protected]>
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Alexandru Ardelean <[email protected]>
iio: adc: ad7192: handle regulator voltage error first
Jonathan Cameron <[email protected]>
iio: adc: ad7192: Avoid disabling a clock that was never enabled.
YueHaibing <[email protected]>
iio: adc: ad7793: Add missing error code in ad7793_setup()
Jonathan Cameron <[email protected]>
iio: adc: ad7923: Fix undersized rx buffer.
Jonathan Cameron <[email protected]>
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
Jonathan Cameron <[email protected]>
iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Jonathan Cameron <[email protected]>
iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
Andy Shevchenko <[email protected]>
iio: dac: ad5770r: Put fwnode in error case during ->probe()
Rui Miguel Silva <[email protected]>
iio: gyro: fxas21002c: balance runtime power in error path
Lucas Stankus <[email protected]>
staging: iio: cdc: ad7746: avoid overwrite of num_channels
Alexander Usyskin <[email protected]>
mei: request autosuspend after sending rx flow control
Marc Zyngier <[email protected]>
KVM: arm64: Prevent mixed-width VM creation
Wanpeng Li <[email protected]>
KVM: X86: Fix vCPU preempted state from guest's point of view
Mathias Nyman <[email protected]>
thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
Mathias Nyman <[email protected]>
thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
Dongliang Mu <[email protected]>
misc/uss720: fix memory leak in uss720_probe
Ondrej Mosnacek <[email protected]>
serial: core: fix suspicious security_locked_down() call
Sargun Dhillon <[email protected]>
seccomp: Refactor notification handler to prepare for new semantics
Sargun Dhillon <[email protected]>
Documentation: seccomp: Fix user notification documentation
Greg Kroah-Hartman <[email protected]>
kgdb: fix gcc-11 warnings harder
Michael Ellerman <[email protected]>
selftests/gpio: Fix build when source tree is read only
Michael Ellerman <[email protected]>
selftests/gpio: Move include of lib.mk up
Michael Ellerman <[email protected]>
selftests/gpio: Use TEST_GEN_PROGS_EXTENDED
James Zhu <[email protected]>
drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
James Zhu <[email protected]>
drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
James Zhu <[email protected]>
drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
Kevin Wang <[email protected]>
drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
James Zhu <[email protected]>
drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
Evan Quan <[email protected]>
drm/amd/pm: correct MGpuFanBoost setting
Mikulas Patocka <[email protected]>
dm snapshot: properly fix a crash when an origin has no snapshots
Sriram R <[email protected]>
ath11k: Clear the fragment cache during key install
Sriram R <[email protected]>
ath10k: Validate first subframe of A-MSDU before processing the list
Wen Gong <[email protected]>
ath10k: Fix TKIP Michael MIC verification for PCIe
Wen Gong <[email protected]>
ath10k: drop MPDU which has discard flag set by firmware for SDIO
Wen Gong <[email protected]>
ath10k: drop fragments with multicast DA for SDIO
Wen Gong <[email protected]>
ath10k: drop fragments with multicast DA for PCIe
Wen Gong <[email protected]>
ath10k: add CCMP PN replay protection for fragmented frames for PCIe
Wen Gong <[email protected]>
mac80211: extend protection against mixed key and fragment cache attacks
Johannes Berg <[email protected]>
mac80211: do not accept/forward invalid EAPOL frames
Johannes Berg <[email protected]>
mac80211: prevent attacks on TKIP/WEP as well
Johannes Berg <[email protected]>
mac80211: check defrag PN against current frame
Johannes Berg <[email protected]>
mac80211: add fragment cache to sta_info
Johannes Berg <[email protected]>
mac80211: drop A-MSDUs on old ciphers
Mathy Vanhoef <[email protected]>
cfg80211: mitigate A-MSDU aggregation attacks
Mathy Vanhoef <[email protected]>
mac80211: properly handle A-MSDUs that start with an RFC 1042 header
Mathy Vanhoef <[email protected]>
mac80211: prevent mixed key and fragment cache attacks
Mathy Vanhoef <[email protected]>
mac80211: assure all fragments are encrypted
Stefano Brivio <[email protected]>
netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version
Davide Caratti <[email protected]>
net/sched: fq_pie: fix OOB access in the traffic path
Davide Caratti <[email protected]>
net/sched: fq_pie: re-factor fix for fq_pie endless loop
Johan Hovold <[email protected]>
net: hso: fix control-request directions
Kees Cook <[email protected]>
proc: Check /proc/$pid/attr/ writes against file opener
Adrian Hunter <[email protected]>
perf scripts python: exported-sql-viewer.py: Fix warning display
Adrian Hunter <[email protected]>
perf scripts python: exported-sql-viewer.py: Fix Array TypeError
Adrian Hunter <[email protected]>
perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report
Adrian Hunter <[email protected]>
perf intel-pt: Fix transaction abort handling
Adrian Hunter <[email protected]>
perf intel-pt: Fix sample instruction bytes
Rolf Eike Beer <[email protected]>
iommu/vt-d: Fix sysfs leak in alloc_iommu()
Anna Schumaker <[email protected]>
NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
Aurelien Aptel <[email protected]>
cifs: set server->cipher_type to AES-128-CCM for SMB3.0
Geoffrey D. Bennett <[email protected]>
ALSA: usb-audio: scarlett2: Improve driver startup messages
Geoffrey D. Bennett <[email protected]>
ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
Peter Ujfalusi <[email protected]>
ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
Hui Wang <[email protected]>
ALSA: hda/realtek: Headphone volume is controlled by Front mixer
Hui Wang <[email protected]>
ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
-------------
Diffstat:
Documentation/userspace-api/seccomp_filter.rst | 16 +-
Makefile | 4 +-
arch/arm64/include/asm/kvm_emulate.h | 5 +
arch/arm64/kvm/reset.c | 28 ++-
arch/mips/alchemy/board-xxs1500.c | 1 +
arch/mips/ralink/of.c | 2 +
arch/openrisc/include/asm/barrier.h | 9 +
arch/x86/kvm/x86.c | 2 +
drivers/acpi/acpi_apd.c | 1 +
drivers/base/core.c | 37 ++--
drivers/char/hpet.c | 2 +
drivers/crypto/cavium/nitrox/nitrox_main.c | 1 -
drivers/dma/qcom/hidma_mgmt.c | 17 +-
drivers/gpio/gpio-cadence.c | 1 +
.../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c | 12 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 1 -
drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 1 +
drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c | 2 +
drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c | 2 -
drivers/gpu/drm/amd/amdgpu/jpeg_v3_0.c | 2 -
drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 5 -
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 6 +-
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 2 +
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c | 2 +
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 8 +-
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 18 ++
drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 9 +
.../drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 10 +
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
drivers/gpu/drm/meson/meson_drv.c | 9 +-
drivers/i2c/busses/i2c-i801.c | 6 +-
drivers/i2c/busses/i2c-mt65xx.c | 5 +
drivers/i2c/busses/i2c-s3c2410.c | 3 +
drivers/i2c/busses/i2c-sh_mobile.c | 2 +-
drivers/iio/adc/ad7124.c | 36 ++--
drivers/iio/adc/ad7192.c | 19 +-
drivers/iio/adc/ad7768-1.c | 8 +-
drivers/iio/adc/ad7793.c | 1 +
drivers/iio/adc/ad7923.c | 4 +-
drivers/iio/dac/ad5770r.c | 16 +-
drivers/iio/gyro/fxas21002c_core.c | 2 +
drivers/interconnect/qcom/bcm-voter.c | 4 +-
drivers/iommu/intel/dmar.c | 4 +-
drivers/iommu/intel/iommu.c | 7 +-
drivers/iommu/intel/pasid.c | 3 +-
drivers/iommu/virtio-iommu.c | 1 +
drivers/isdn/hardware/mISDN/hfcsusb.c | 17 +-
drivers/isdn/hardware/mISDN/mISDNinfineon.c | 21 ++-
drivers/md/dm-snap.c | 2 +-
drivers/media/dvb-frontends/sp8870.c | 2 +-
drivers/media/usb/gspca/cpia1.c | 6 +-
drivers/media/usb/gspca/m5602/m5602_mt9m111.c | 16 +-
drivers/media/usb/gspca/m5602/m5602_po1030.c | 14 +-
drivers/misc/kgdbts.c | 3 +-
drivers/misc/lis3lv02d/lis3lv02d.h | 1 +
drivers/misc/mei/interrupt.c | 3 +
drivers/net/caif/caif_serial.c | 3 -
drivers/net/dsa/mt7530.c | 8 -
drivers/net/dsa/sja1105/sja1105_dynamic_config.c | 23 ++-
drivers/net/dsa/sja1105/sja1105_main.c | 75 +++++---
drivers/net/ethernet/broadcom/bnx2.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 12 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 10 +
drivers/net/ethernet/cavium/liquidio/lio_main.c | 27 ++-
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 27 ++-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +-
.../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 80 +++++++-
.../chelsio/inline_crypto/ch_ktls/chcr_ktls.h | 2 +
.../chelsio/inline_crypto/chtls/chtls_io.c | 6 +-
drivers/net/ethernet/freescale/fec_main.c | 11 +-
drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 4 +-
drivers/net/ethernet/google/gve/gve_main.c | 21 ++-
drivers/net/ethernet/google/gve/gve_tx.c | 8 +-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 26 ++-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 4 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 16 +-
drivers/net/ethernet/lantiq_xrx200.c | 14 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 22 +++
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 54 +++++-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 67 ++++---
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 24 ++-
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 +-
drivers/net/ethernet/mellanox/mlx4/port.c | 107 ++++++++++-
.../net/ethernet/mellanox/mlx5/core/en/rep/bond.c | 2 +
.../net/ethernet/mellanox/mlx5/core/en/rep/tc.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 1 +
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 10 +-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 +
.../mellanox/mlx5/core/eswitch_offloads_termtbl.c | 38 ++--
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 +
drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 3 +
drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h | 5 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +-
drivers/net/ethernet/ti/netcp_core.c | 4 +-
drivers/net/ipa/ipa.h | 2 +
drivers/net/ipa/ipa_mem.c | 3 +-
drivers/net/mdio/mdio-octeon.c | 2 -
drivers/net/mdio/mdio-thunder.c | 1 -
drivers/net/usb/hso.c | 45 +++--
drivers/net/usb/smsc75xx.c | 8 +-
drivers/net/wireless/ath/ath10k/htt.h | 1 +
drivers/net/wireless/ath/ath10k/htt_rx.c | 201 ++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/rx_desc.h | 14 +-
drivers/net/wireless/ath/ath11k/dp_rx.c | 18 ++
drivers/net/wireless/ath/ath11k/dp_rx.h | 1 +
drivers/net/wireless/ath/ath11k/mac.c | 6 +
drivers/net/wireless/ath/ath6kl/debug.c | 5 +-
.../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 +-
.../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 19 +-
.../wireless/broadcom/brcm80211/brcmfmac/core.c | 42 ++---
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 9 +-
.../wireless/broadcom/brcm80211/brcmfmac/pcie.h | 5 -
.../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 8 +-
drivers/net/wireless/marvell/libertas/mesh.c | 33 +---
drivers/nvme/target/tcp.c | 2 +-
drivers/platform/x86/hp-wireless.c | 2 +
drivers/platform/x86/hp_accel.c | 22 ++-
drivers/platform/x86/intel_punit_ipc.c | 1 +
drivers/platform/x86/touchscreen_dmi.c | 43 +++++
drivers/s390/cio/vfio_ccw_cp.c | 4 +
drivers/scsi/BusLogic.c | 6 +-
drivers/scsi/BusLogic.h | 2 +-
drivers/scsi/libsas/sas_port.c | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 10 +-
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.c | 7 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 12 +-
drivers/scsi/ufs/ufs-mediatek.c | 4 +
drivers/spi/spi-fsl-dspi.c | 4 +-
drivers/spi/spi.c | 23 ++-
drivers/staging/emxx_udc/emxx_udc.c | 4 +-
drivers/staging/iio/cdc/ad7746.c | 1 -
.../intel/int340x_thermal/int340x_thermal_zone.c | 4 +
drivers/thermal/intel/x86_pkg_temp_thermal.c | 2 +-
drivers/thunderbolt/dma_port.c | 11 +-
drivers/thunderbolt/usb4.c | 9 +-
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 +
drivers/tty/serial/8250/8250_dw.c | 1 +
drivers/tty/serial/8250/8250_pci.c | 47 +++--
drivers/tty/serial/8250/8250_port.c | 12 ++
drivers/tty/serial/max310x.c | 2 +
drivers/tty/serial/rp2.c | 52 ++----
drivers/tty/serial/serial-tegra.c | 2 +-
drivers/tty/serial/serial_core.c | 8 +-
drivers/tty/serial/sh-sci.c | 4 +-
drivers/usb/core/devio.c | 11 +-
drivers/usb/core/hub.h | 6 +-
drivers/usb/dwc3/gadget.c | 13 +-
drivers/usb/gadget/udc/renesas_usb3.c | 5 +-
drivers/usb/misc/trancevibrator.c | 4 +-
drivers/usb/misc/uss720.c | 1 +
drivers/usb/serial/ftdi_sio.c | 3 +
drivers/usb/serial/ftdi_sio_ids.h | 7 +
drivers/usb/serial/option.c | 4 +
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
drivers/usb/serial/ti_usb_3410_5052.c | 3 +
drivers/usb/typec/mux.c | 7 +-
drivers/vdpa/mlx5/net/mlx5_vnet.c | 19 +-
fs/afs/dir.c | 4 +-
fs/block_dev.c | 3 +
fs/btrfs/extent_io.c | 7 +-
fs/btrfs/reflink.c | 5 +
fs/btrfs/tree-log.c | 2 -
fs/cifs/smb2pdu.c | 13 +-
fs/nfs/filelayout/filelayout.c | 2 +-
fs/nfs/nfs4file.c | 2 +-
fs/nfs/nfs4proc.c | 4 +-
fs/nfs/pagelist.c | 21 +--
fs/nfs/pnfs.c | 15 +-
fs/proc/base.c | 4 +
include/linux/bits.h | 2 +-
include/linux/const.h | 8 +
include/linux/device.h | 6 +-
include/linux/minmax.h | 10 +-
include/linux/mlx5/mpfs.h | 18 ++
include/linux/sunrpc/xprt.h | 2 +
include/net/cfg80211.h | 4 +-
include/net/netfilter/nf_flow_table.h | 1 -
include/net/pkt_cls.h | 11 ++
include/net/pkt_sched.h | 7 +-
include/net/sch_generic.h | 35 +++-
include/net/sock.h | 4 +-
kernel/bpf/verifier.c | 12 +-
kernel/seccomp.c | 30 +--
net/bluetooth/cmtp/core.c | 5 +
net/core/dev.c | 29 ++-
net/core/filter.c | 1 +
net/core/neighbour.c | 4 +
net/core/sock.c | 8 +-
net/dsa/master.c | 5 +-
net/dsa/slave.c | 12 +-
net/hsr/hsr_device.c | 2 +
net/hsr/hsr_forward.c | 30 ++-
net/hsr/hsr_forward.h | 8 +-
net/hsr/hsr_main.h | 4 +-
net/hsr/hsr_slave.c | 11 +-
net/ipv6/mcast.c | 3 -
net/ipv6/reassembly.c | 4 +-
net/mac80211/ieee80211_i.h | 36 ++--
net/mac80211/iface.c | 11 +-
net/mac80211/key.c | 7 +
net/mac80211/key.h | 2 +
net/mac80211/rx.c | 150 +++++++++++----
net/mac80211/sta_info.c | 6 +-
net/mac80211/sta_info.h | 33 +++-
net/mac80211/wpa.c | 13 +-
net/mptcp/options.c | 1 -
net/mptcp/protocol.c | 6 +
net/mptcp/subflow.c | 1 -
net/netfilter/nf_flow_table_core.c | 3 +-
net/netfilter/nf_flow_table_offload.c | 7 +-
net/netfilter/nft_set_pipapo.c | 4 +-
net/netfilter/nft_set_pipapo.h | 2 +
net/netfilter/nft_set_pipapo_avx2.c | 3 +
net/openvswitch/meter.c | 8 +
net/packet/af_packet.c | 10 +-
net/sched/cls_api.c | 2 +-
net/sched/sch_dsmark.c | 3 +-
net/sched/sch_fq_pie.c | 19 +-
net/sched/sch_generic.c | 50 ++++-
net/smc/smc_ism.c | 26 ++-
net/sunrpc/clnt.c | 7 -
net/sunrpc/xprt.c | 40 +++-
net/sunrpc/xprtrdma/transport.c | 12 +-
net/sunrpc/xprtrdma/verbs.c | 18 +-
net/sunrpc/xprtrdma/xprt_rdma.h | 1 +
net/tipc/core.c | 2 +
net/tipc/core.h | 2 +
net/tipc/msg.c | 9 +-
net/tipc/socket.c | 5 +-
net/tipc/udp_media.c | 2 +
net/tls/tls_sw.c | 11 +-
net/wireless/util.c | 7 +-
samples/bpf/xdpsock_user.c | 2 +-
scripts/clang-tools/gen_compile_commands.py | 2 +-
scripts/clang-tools/run-clang-tools.py | 2 +-
sound/isa/gus/gus_main.c | 13 +-
sound/isa/sb/sb16_main.c | 10 +-
sound/isa/sb/sb8.c | 6 +-
sound/pci/hda/patch_realtek.c | 46 ++++-
sound/soc/codecs/cs35l33.c | 1 +
sound/soc/codecs/cs42l42.c | 3 +
sound/soc/codecs/cs43130.c | 28 ++-
sound/soc/qcom/lpass-cpu.c | 12 +-
sound/usb/mixer_quirks.c | 2 +-
sound/usb/mixer_scarlett_gen2.c | 81 ++++++---
sound/usb/mixer_scarlett_gen2.h | 2 +-
tools/bpf/bpftool/Documentation/bpftool-cgroup.rst | 4 +-
tools/bpf/bpftool/Documentation/bpftool-prog.rst | 2 +-
tools/bpf/bpftool/bash-completion/bpftool | 6 +-
tools/bpf/bpftool/cgroup.c | 3 +-
tools/bpf/bpftool/prog.c | 2 +-
tools/include/linux/bits.h | 2 +-
tools/include/linux/const.h | 8 +
tools/perf/pmu-events/jevents.c | 2 +-
tools/perf/scripts/python/exported-sql-viewer.py | 12 +-
.../perf/util/intel-pt-decoder/intel-pt-decoder.c | 6 +-
tools/perf/util/intel-pt.c | 5 +-
tools/testing/selftests/gpio/Makefile | 24 +--
.../tc-testing/tc-tests/qdiscs/fq_pie.json | 8 +-
virt/lib/irqbypass.c | 16 +-
266 files changed, 2250 insertions(+), 939 deletions(-)
From: Sargun Dhillon <[email protected]>
commit aac902925ea646e461c95edc98a8a57eb0def917 upstream.
The documentation had some previously incorrect information about how
userspace notifications (and responses) were handled due to a change
from a previously proposed patchset.
Signed-off-by: Sargun Dhillon <[email protected]>
Acked-by: Tycho Andersen <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/userspace-api/seccomp_filter.rst | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/Documentation/userspace-api/seccomp_filter.rst
+++ b/Documentation/userspace-api/seccomp_filter.rst
@@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL
seccomp notification fd to receive a ``struct seccomp_notif``, which contains
five members: the input length of the structure, a unique-per-filter ``id``,
the ``pid`` of the task which triggered this request (which may be 0 if the
-task is in a pid ns not visible from the listener's pid namespace), a ``flags``
-member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
-whether or not the notification is a result of a non-fatal signal, and the
-``data`` passed to seccomp. Userspace can then make a decision based on this
-information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
-response, indicating what should be returned to userspace. The ``id`` member of
-``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
-seccomp_notif``.
+task is in a pid ns not visible from the listener's pid namespace). The
+notification also contains the ``data`` passed to seccomp, and a filters flag.
+The structure should be zeroed out prior to calling the ioctl.
+
+Userspace can then make a decision based on this information about what to do,
+and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be
+returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should
+be the same ``id`` as in ``struct seccomp_notif``.
It is worth noting that ``struct seccomp_data`` contains the values of register
arguments to the syscall, but does not contain pointers to memory. The task's
From: Johannes Berg <[email protected]>
commit 7e44a0b597f04e67eee8cdcbe7ee706c6f5de38b upstream.
Similar to the issues fixed in previous patches, TKIP and WEP
should be protected even if for TKIP we have the Michael MIC
protecting it, and WEP is broken anyway.
However, this also somewhat protects potential other algorithms
that drivers might implement.
Cc: [email protected]
Link: https://lore.kernel.org/r/20210511200110.430e8c202313.Ia37e4e5b6b3eaab1a5ae050e015f6c92859dbe27@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/rx.c | 12 ++++++++++++
net/mac80211/sta_info.h | 3 ++-
2 files changed, 14 insertions(+), 1 deletion(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2284,6 +2284,7 @@ ieee80211_rx_h_defragment(struct ieee802
* next fragment has a sequential PN value.
*/
entry->check_sequential_pn = true;
+ entry->is_protected = true;
entry->key_color = rx->key->color;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[queue],
@@ -2296,6 +2297,9 @@ ieee80211_rx_h_defragment(struct ieee802
sizeof(rx->key->u.gcmp.rx_pn[queue]));
BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN !=
IEEE80211_GCMP_PN_LEN);
+ } else if (rx->key && ieee80211_has_protected(fc)) {
+ entry->is_protected = true;
+ entry->key_color = rx->key->color;
}
return RX_QUEUED;
}
@@ -2337,6 +2341,14 @@ ieee80211_rx_h_defragment(struct ieee802
if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN))
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
+ } else if (entry->is_protected &&
+ (!rx->key || !ieee80211_has_protected(fc) ||
+ rx->key->color != entry->key_color)) {
+ /* Drop this as a mixed key or fragment cache attack, even
+ * if for TKIP Michael MIC should protect us, and WEP is a
+ * lost cause anyway.
+ */
+ return RX_DROP_UNUSABLE;
}
skb_pull(rx->skb, ieee80211_hdrlen(fc));
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -453,7 +453,8 @@ struct ieee80211_fragment_entry {
u16 extra_len;
u16 last_frag;
u8 rx_queue;
- bool check_sequential_pn; /* needed for CCMP/GCMP */
+ u8 check_sequential_pn:1, /* needed for CCMP/GCMP */
+ is_protected:1;
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
unsigned int key_color;
};
From: Michael Ellerman <[email protected]>
[ Upstream commit 449539da2e237336bc750b41f1736a77f9aca25c ]
Move the include of lib.mk up so that in a subsequent patch we can use
OUTPUT, which is initialised by lib.mk, in the definition of the GPIO
variables.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/gpio/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index c85fb5acf5f4..615c8a953ade 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -13,6 +13,9 @@ TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh
TEST_GEN_PROGS_EXTENDED := gpio-mockup-chardev
+KSFT_KHDR_INSTALL := 1
+include ../lib.mk
+
GPIODIR := $(realpath ../../../gpio)
GPIOOBJ := gpio-utils.o
@@ -21,9 +24,6 @@ override define CLEAN
$(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean
endef
-KSFT_KHDR_INSTALL := 1
-include ../lib.mk
-
$(TEST_GEN_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ)
$(GPIODIR)/$(GPIOOBJ):
--
2.30.2
From: Wen Gong <[email protected]>
commit 65c415a144ad8132b6a6d97d4a1919ffc728e2d1 upstream.
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: [email protected]
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Link: https://lore.kernel.org/r/20210511200110.5a0bd289bda8.Idd6ebea20038fb1cfee6de924aa595e5647c9eae@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1768,6 +1768,16 @@ static u64 ath10k_htt_rx_h_get_pn(struct
return pn;
}
+static bool ath10k_htt_rx_h_frag_multicast_check(struct ath10k *ar,
+ struct sk_buff *skb,
+ u16 offset)
+{
+ struct ieee80211_hdr *hdr;
+
+ hdr = (struct ieee80211_hdr *)(skb->data + offset);
+ return !is_multicast_ether_addr(hdr->addr1);
+}
+
static bool ath10k_htt_rx_h_frag_pn_check(struct ath10k *ar,
struct sk_buff *skb,
u16 peer_id,
@@ -1839,7 +1849,7 @@ static void ath10k_htt_rx_h_mpdu(struct
bool is_decrypted;
bool is_mgmt;
u32 attention;
- bool frag_pn_check = true;
+ bool frag_pn_check = true, multicast_check = true;
if (skb_queue_empty(amsdu))
return;
@@ -1946,13 +1956,20 @@ static void ath10k_htt_rx_h_mpdu(struct
0,
enctype);
- if (!frag_pn_check) {
- /* Discard the fragment with invalid PN */
+ if (frag)
+ multicast_check = ath10k_htt_rx_h_frag_multicast_check(ar,
+ msdu,
+ 0);
+
+ if (!frag_pn_check || !multicast_check) {
+ /* Discard the fragment with invalid PN or multicast DA
+ */
temp = msdu->prev;
__skb_unlink(msdu, amsdu);
dev_kfree_skb_any(msdu);
msdu = temp;
frag_pn_check = true;
+ multicast_check = true;
continue;
}
From: Wen Gong <[email protected]>
commit 40e7462dad6f3d06efdb17d26539e61ab6e34db1 upstream.
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: [email protected]
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Link: https://lore.kernel.org/r/20210511200110.9ca6ca7945a9.I1e18b514590af17c155bda86699bc3a971a8dcf4@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2617,6 +2617,13 @@ static bool ath10k_htt_rx_proc_rx_frag_i
rx_desc = (struct htt_hl_rx_desc *)(skb->data + tot_hdr_len);
rx_desc_info = __le32_to_cpu(rx_desc->info);
+ hdr = (struct ieee80211_hdr *)((u8 *)rx_desc + rx_hl->fw_desc.len);
+
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ /* Discard the fragment with multicast DA */
+ goto err;
+ }
+
if (!MS(rx_desc_info, HTT_RX_DESC_HL_INFO_ENCRYPTED)) {
spin_unlock_bh(&ar->data_lock);
return ath10k_htt_rx_proc_rx_ind_hl(htt, &resp->rx_ind_hl, skb,
@@ -2624,8 +2631,6 @@ static bool ath10k_htt_rx_proc_rx_frag_i
HTT_RX_NON_TKIP_MIC);
}
- hdr = (struct ieee80211_hdr *)((u8 *)rx_desc + rx_hl->fw_desc.len);
-
if (ieee80211_has_retry(hdr->frame_control))
goto err;
From: Wanpeng Li <[email protected]>
commit 1eff0ada88b48e4ac1e3fe26483b3684fedecd27 upstream.
Commit 66570e966dd9 (kvm: x86: only provide PV features if enabled in guest's
CPUID) avoids to access pv tlb shootdown host side logic when this pv feature
is not exposed to guest, however, kvm_steal_time.preempted not only leveraged
by pv tlb shootdown logic but also mitigate the lock holder preemption issue.
>From guest's point of view, vCPU is always preempted since we lose the reset
of kvm_steal_time.preempted before vmentry if pv tlb shootdown feature is not
exposed. This patch fixes it by clearing kvm_steal_time.preempted before
vmentry.
Fixes: 66570e966dd9 (kvm: x86: only provide PV features if enabled in guest's CPUID)
Reviewed-by: Sean Christopherson <[email protected]>
Cc: [email protected]
Signed-off-by: Wanpeng Li <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3006,6 +3006,8 @@ static void record_steal_time(struct kvm
st->preempted & KVM_VCPU_FLUSH_TLB);
if (xchg(&st->preempted, 0) & KVM_VCPU_FLUSH_TLB)
kvm_vcpu_flush_tlb_guest(vcpu);
+ } else {
+ st->preempted = 0;
}
vcpu->arch.st.preempted = 0;
From: Mathias Nyman <[email protected]>
commit b106776080a1cf953a1b2fd50cb2a995db4732be upstream.
Up to 64 bytes of data can be read from NVM in one go. Read address
must be dword aligned. Data is read into a local buffer.
If caller asks to read data starting at an unaligned address then full
dword is anyway read from NVM into a local buffer. Data is then copied
from the local buffer starting at the unaligned offset to the caller
buffer.
In cases where asked data length + unaligned offset is over 64 bytes
we need to make sure we don't read past the 64 bytes in the local
buffer when copying to caller buffer, and make sure that we don't
skip copying unaligned offset bytes from local buffer anymore after
the first round of 64 byte NVM data read.
Fixes: 3e13676862f9 ("thunderbolt: Add support for DMA configuration based mailbox")
Cc: [email protected]
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thunderbolt/dma_port.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/thunderbolt/dma_port.c
+++ b/drivers/thunderbolt/dma_port.c
@@ -364,15 +364,15 @@ int dma_port_flash_read(struct tb_dma_po
void *buf, size_t size)
{
unsigned int retries = DMA_PORT_RETRIES;
- unsigned int offset;
-
- offset = address & 3;
- address = address & ~3;
do {
- u32 nbytes = min_t(u32, size, MAIL_DATA_DWORDS * 4);
+ unsigned int offset;
+ size_t nbytes;
int ret;
+ offset = address & 3;
+ nbytes = min_t(size_t, size + offset, MAIL_DATA_DWORDS * 4);
+
ret = dma_port_flash_read_block(dma, address, dma->buf,
ALIGN(nbytes, 4));
if (ret) {
@@ -384,6 +384,7 @@ int dma_port_flash_read(struct tb_dma_po
return ret;
}
+ nbytes -= offset;
memcpy(buf, dma->buf + offset, nbytes);
size -= nbytes;
From: Mikulas Patocka <[email protected]>
commit 7e768532b2396bcb7fbf6f82384b85c0f1d2f197 upstream.
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-snap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -854,7 +854,7 @@ static int dm_add_exception(void *contex
static uint32_t __minimum_chunk_size(struct origin *o)
{
struct dm_snapshot *snap;
- unsigned chunk_size = 0;
+ unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
if (o)
list_for_each_entry(snap, &o->snapshots, list)
From: Michael Ellerman <[email protected]>
[ Upstream commit b68c1c65dec5fb5186ebd33ce52059b4c6db8500 ]
Currently the gpio selftests fail to build if the source tree is read
only:
make -j 160 -C tools/testing/selftests TARGETS=gpio
make[1]: Entering directory '/linux/tools/testing/selftests/gpio'
make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio
make[2]: Entering directory '/linux/tools/gpio'
mkdir -p /linux/tools/gpio/include/linux 2>&1 || true
ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h
ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system
This happens because we ask make to build ../../../gpio (tools/gpio)
without pointing OUTPUT away from the source directory.
To fix it we create a subdirectory of the existing OUTPUT directory,
called tools-gpio, and tell tools/gpio to build in there.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/gpio/Makefile | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index 615c8a953ade..acf4088a9891 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -17,14 +17,18 @@ KSFT_KHDR_INSTALL := 1
include ../lib.mk
GPIODIR := $(realpath ../../../gpio)
-GPIOOBJ := gpio-utils.o
+GPIOOUT := $(OUTPUT)/tools-gpio/
+GPIOOBJ := $(GPIOOUT)/gpio-utils.o
override define CLEAN
$(RM) $(TEST_GEN_PROGS_EXTENDED)
- $(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean
+ $(RM) -rf $(GPIOOUT)
endef
-$(TEST_GEN_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ)
+$(TEST_GEN_PROGS_EXTENDED): $(GPIOOBJ)
-$(GPIODIR)/$(GPIOOBJ):
- $(MAKE) OUTPUT=$(GPIODIR)/ -C $(GPIODIR)
+$(GPIOOUT):
+ mkdir -p $@
+
+$(GPIOOBJ): $(GPIOOUT)
+ $(MAKE) OUTPUT=$(GPIOOUT) -C $(GPIODIR)
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
commit bda7d3ab06f19c02dcef61fefcb9dd954dfd5e4f upstream.
40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation") tried to fix up
the gcc-11 complaints in this file by just reformatting the #defines.
That worked for gcc 11.1.0, but in gcc 11.1.1 as shipped by Fedora 34,
the warning came back for one of the #defines.
Fix this up again by putting { } around the if statement, now it is
quiet again.
Fixes: 40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation")
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Jason Wessel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/kgdbts.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -100,8 +100,9 @@
printk(KERN_INFO a); \
} while (0)
#define v2printk(a...) do { \
- if (verbose > 1) \
+ if (verbose > 1) { \
printk(KERN_INFO a); \
+ } \
touch_nmi_watchdog(); \
} while (0)
#define eprintk(a...) do { \
From: Alexander Usyskin <[email protected]>
commit bbf0a94744edfeee298e4a9ab6fd694d639a5cdf upstream.
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
Cc: <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/interrupt.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -277,6 +277,9 @@ static int mei_cl_irq_read(struct mei_cl
return ret;
}
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_request_autosuspend(dev->dev);
+
list_move_tail(&cb->list, &cl->rd_pending);
return 0;
From: Sargun Dhillon <[email protected]>
commit ddc473916955f7710d1eb17c1273d91c8622a9fe upstream.
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.
Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].
[1]: https://lore.kernel.org/lkml/[email protected]/
Fixes: 7cf97b125455 ("seccomp: Introduce addfd ioctl to seccomp user notifier")
Signed-off-by: Sargun Dhillon <[email protected]>
Acked-by: Tycho Andersen <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Tested-by: Rodrigo Campos <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/seccomp.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -864,28 +864,30 @@ static int seccomp_do_user_notification(
up(&match->notif->request);
wake_up_poll(&match->wqh, EPOLLIN | EPOLLRDNORM);
- mutex_unlock(&match->notify_lock);
/*
* This is where we wait for a reply from userspace.
*/
-wait:
- err = wait_for_completion_interruptible(&n.ready);
- mutex_lock(&match->notify_lock);
- if (err == 0) {
- /* Check if we were woken up by a addfd message */
+ do {
+ mutex_unlock(&match->notify_lock);
+ err = wait_for_completion_interruptible(&n.ready);
+ mutex_lock(&match->notify_lock);
+ if (err != 0)
+ goto interrupted;
+
addfd = list_first_entry_or_null(&n.addfd,
struct seccomp_kaddfd, list);
- if (addfd && n.state != SECCOMP_NOTIFY_REPLIED) {
+ /* Check if we were woken up by a addfd message */
+ if (addfd)
seccomp_handle_addfd(addfd);
- mutex_unlock(&match->notify_lock);
- goto wait;
- }
- ret = n.val;
- err = n.error;
- flags = n.flags;
- }
+ } while (n.state != SECCOMP_NOTIFY_REPLIED);
+
+ ret = n.val;
+ err = n.error;
+ flags = n.flags;
+
+interrupted:
/* If there were any pending addfd calls, clear them out */
list_for_each_entry_safe(addfd, tmp, &n.addfd, list) {
/* The process went away before we got a chance to handle it */
From: Ondrej Mosnacek <[email protected]>
commit 5e722b217ad3cf41f5504db80a68062df82b5242 upstream.
The commit that added this check did so in a very strange way - first
security_locked_down() is called, its value stored into retval, and if
it's nonzero, then an additional check is made for (change_irq ||
change_port), and if this is true, the function returns. However, if
the goto exit branch is not taken, the code keeps the retval value and
continues executing the function. Then, depending on whether
uport->ops->verify_port is set, the retval value may or may not be reset
to zero and eventually the error value from security_locked_down() may
abort the function a few lines below.
I will go out on a limb and assume that this isn't the intended behavior
and that an error value from security_locked_down() was supposed to
abort the function only in case (change_irq || change_port) is true.
Note that security_locked_down() should be called last in any series of
checks, since the SELinux implementation of this hook will do a check
against the policy and generate an audit record in case of denial. If
the operation was to carry on after calling security_locked_down(), then
the SELinux denial record would be bogus.
See commit 59438b46471a ("security,lockdown,selinux: implement SELinux
lockdown") for how SELinux implements this hook.
Fixes: 794edf30ee6c ("lockdown: Lock down TIOCSSERIAL")
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Ondrej Mosnacek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial_core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -865,9 +865,11 @@ static int uart_set_info(struct tty_stru
goto check_and_exit;
}
- retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
- if (retval && (change_irq || change_port))
- goto exit;
+ if (change_irq || change_port) {
+ retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
+ if (retval)
+ goto exit;
+ }
/*
* Ask the low level driver to verify the settings.
From: Mathias Nyman <[email protected]>
commit 22c7a18ed5f007faccb7527bc890463763214081 upstream.
Up to 64 bytes of data can be read from NVM in one go.
Read address must be dword aligned. Data is read into a local buffer.
If caller asks to read data starting at an unaligned address then full
dword is anyway read from NVM into a local buffer. Data is then copied
from the local buffer starting at the unaligned offset to the caller
buffer.
In cases where asked data length + unaligned offset is over 64 bytes
we need to make sure we don't read past the 64 bytes in the local
buffer when copying to caller buffer, and make sure that we don't
skip copying unaligned offset bytes from local buffer anymore after
the first round of 64 byte NVM data read.
Fixes: b04079837b20 ("thunderbolt: Add initial support for USB4")
Cc: [email protected]
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thunderbolt/usb4.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -108,15 +108,15 @@ static int usb4_do_read_data(u16 address
unsigned int retries = USB4_DATA_RETRIES;
unsigned int offset;
- offset = address & 3;
- address = address & ~3;
-
do {
- size_t nbytes = min_t(size_t, size, USB4_DATA_DWORDS * 4);
unsigned int dwaddress, dwords;
u8 data[USB4_DATA_DWORDS * 4];
+ size_t nbytes;
int ret;
+ offset = address & 3;
+ nbytes = min_t(size_t, size + offset, USB4_DATA_DWORDS * 4);
+
dwaddress = address / 4;
dwords = ALIGN(nbytes, 4) / 4;
@@ -127,6 +127,7 @@ static int usb4_do_read_data(u16 address
return ret;
}
+ nbytes -= offset;
memcpy(buf, data + offset, nbytes);
size -= nbytes;
From: Dongliang Mu <[email protected]>
commit dcb4b8ad6a448532d8b681b5d1a7036210b622de upstream.
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe.
Fix this by decreasing the refcount of usbdev by usb_put_dev.
BUG: memory leak
unreferenced object 0xffff888101113800 (size 2048):
comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s)
hex dump (first 32 bytes):
ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1...........
00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................
backtrace:
[<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline]
[<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline]
[<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582
[<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline]
[<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
[<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline]
[<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591
[<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275
[<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421
[<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off")
Cc: stable <[email protected]>
Reported-by: [email protected]
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/uss720.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -736,6 +736,7 @@ static int uss720_probe(struct usb_inter
parport_announce_port(pp);
usb_set_intfdata(intf, pp);
+ usb_put_dev(usbdev);
return 0;
probe_abort:
From: Marc Zyngier <[email protected]>
commit 66e94d5cafd4decd4f92d16a022ea587d7f4094f upstream.
It looks like we have tolerated creating mixed-width VMs since...
forever. However, that was never the intention, and we'd rather
not have to support that pointless complexity.
Forbid such a setup by making sure all the vcpus have the same
register width.
Reported-by: Steven Price <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Acked-by: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/kvm_emulate.h | 5 +++++
arch/arm64/kvm/reset.c | 28 ++++++++++++++++++++++++----
2 files changed, 29 insertions(+), 4 deletions(-)
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -505,4 +505,9 @@ static __always_inline void __kvm_skip_i
write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR);
}
+static inline bool vcpu_has_feature(struct kvm_vcpu *vcpu, int feature)
+{
+ return test_bit(feature, vcpu->arch.features);
+}
+
#endif /* __ARM64_KVM_EMULATE_H__ */
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -223,6 +223,25 @@ static int kvm_vcpu_enable_ptrauth(struc
return 0;
}
+static bool vcpu_allowed_register_width(struct kvm_vcpu *vcpu)
+{
+ struct kvm_vcpu *tmp;
+ bool is32bit;
+ int i;
+
+ is32bit = vcpu_has_feature(vcpu, KVM_ARM_VCPU_EL1_32BIT);
+ if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1) && is32bit)
+ return false;
+
+ /* Check that the vcpus are either all 32bit or all 64bit */
+ kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
+ if (vcpu_has_feature(tmp, KVM_ARM_VCPU_EL1_32BIT) != is32bit)
+ return false;
+ }
+
+ return true;
+}
+
/**
* kvm_reset_vcpu - sets core registers and sys_regs to reset value
* @vcpu: The VCPU pointer
@@ -274,13 +293,14 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu
}
}
+ if (!vcpu_allowed_register_width(vcpu)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
switch (vcpu->arch.target) {
default:
if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) {
- if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1)) {
- ret = -EINVAL;
- goto out;
- }
pstate = VCPU_RESET_PSTATE_SVC;
} else {
pstate = VCPU_RESET_PSTATE_EL1;
From: Lucas Stankus <[email protected]>
commit 04f5b9f539ce314f758d919a14dc7a669f3b7838 upstream.
AD7745 devices don't have the CIN2 pins and therefore can't handle related
channels. Forcing the number of AD7746 channels may lead to enabling more
channels than what the hardware actually supports.
Avoid num_channels being overwritten after first assignment.
Signed-off-by: Lucas Stankus <[email protected]>
Fixes: 83e416f458d53 ("staging: iio: adc: Replace, rewrite ad7745 from scratch.")
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/cdc/ad7746.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -700,7 +700,6 @@ static int ad7746_probe(struct i2c_clien
indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
else
indio_dev->num_channels = ARRAY_SIZE(ad7746_channels) - 2;
- indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
if (pdata) {
From: Jonathan Cameron <[email protected]>
commit f2a772c51206b0c3f262e4f6a3812c89a650191b upstream.
Channel numbering must start at 0 and then not have any holes, or
it is possible to overflow the available storage. Note this bug was
introduced as part of a fix to ensure we didn't rely on the ordering
of child nodes. So we need to support arbitrary ordering but they all
need to be there somewhere.
Note I hit this when using qemu to test the rest of this series.
Arguably this isn't the best fix, but it is probably the most minimal
option for backporting etc.
Alexandru's sign-off is here because he carried this patch in a larger
set that Jonathan then applied.
Fixes: d7857e4ee1ba6 ("iio: adc: ad7124: Fix DT channel configuration")
Reviewed-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7124.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -616,6 +616,13 @@ static int ad7124_of_parse_channel_confi
if (ret)
goto err;
+ if (channel >= indio_dev->num_channels) {
+ dev_err(indio_dev->dev.parent,
+ "Channel index >= number of channels\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
ret = of_property_read_u32_array(child, "diff-channels",
ain, 2);
if (ret)
From: Jonathan Cameron <[email protected]>
commit 01fcf129f61b26d5b3d2d8afb03e770dee271bc8 upstream.
Fixes tag is where the max channels became 8, but timestamp space was missing
before that.
Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Daniel Junho <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7923.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -59,8 +59,10 @@ struct ad7923_state {
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
+ * Ensure rx_buf can be directly used in iio_push_to_buffers_with_timetamp
+ * Length = 8 channels + 4 extra for 8 byte timestamp
*/
- __be16 rx_buf[4] ____cacheline_aligned;
+ __be16 rx_buf[12] ____cacheline_aligned;
__be16 tx_buf[4];
};
From: Andy Shevchenko <[email protected]>
commit 98b7b0ca0828907dbb706387c11356a45463e2ea upstream.
device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support")
Cc: Alexandru Tachici <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/dac/ad5770r.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/iio/dac/ad5770r.c
+++ b/drivers/iio/dac/ad5770r.c
@@ -524,23 +524,29 @@ static int ad5770r_channel_config(struct
device_for_each_child_node(&st->spi->dev, child) {
ret = fwnode_property_read_u32(child, "num", &num);
if (ret)
- return ret;
- if (num >= AD5770R_MAX_CHANNELS)
- return -EINVAL;
+ goto err_child_out;
+ if (num >= AD5770R_MAX_CHANNELS) {
+ ret = -EINVAL;
+ goto err_child_out;
+ }
ret = fwnode_property_read_u32_array(child,
"adi,range-microamp",
tmp, 2);
if (ret)
- return ret;
+ goto err_child_out;
min = tmp[0] / 1000;
max = tmp[1] / 1000;
ret = ad5770r_store_output_range(st, min, max, num);
if (ret)
- return ret;
+ goto err_child_out;
}
+ return 0;
+
+err_child_out:
+ fwnode_handle_put(child);
return ret;
}
From: Rui Miguel Silva <[email protected]>
commit 2a54c8c9ebc2006bf72554afc84ffc67768979a0 upstream.
If we fail to read temperature or axis we need to decrement the
runtime pm reference count to trigger autosuspend.
Add the call to pm_put to do that in case of error.
Fixes: a0701b6263ae ("iio: gyro: add core driver for fxas21002c")
Suggested-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Rui Miguel Silva <[email protected]>
Link: https://lore.kernel.org/linux-iio/CBBZA9T1OY9C.2611WSV49DV2G@arch-thunder/
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/gyro/fxas21002c_core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/iio/gyro/fxas21002c_core.c
+++ b/drivers/iio/gyro/fxas21002c_core.c
@@ -399,6 +399,7 @@ static int fxas21002c_temp_get(struct fx
ret = regmap_field_read(data->regmap_fields[F_TEMP], &temp);
if (ret < 0) {
dev_err(dev, "failed to read temp: %d\n", ret);
+ fxas21002c_pm_put(data);
goto data_unlock;
}
@@ -432,6 +433,7 @@ static int fxas21002c_axis_get(struct fx
&axis_be, sizeof(axis_be));
if (ret < 0) {
dev_err(dev, "failed to read axis: %d: %d\n", index, ret);
+ fxas21002c_pm_put(data);
goto data_unlock;
}
From: YueHaibing <[email protected]>
commit 4ed243b1da169bcbc1ec5507867e56250c5f1ff9 upstream.
Set error code while device ID query failed.
Fixes: 88bc30548aae ("IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC")
Signed-off-by: YueHaibing <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7793.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -279,6 +279,7 @@ static int ad7793_setup(struct iio_dev *
id &= AD7793_ID_MASK;
if (id != st->chip_info->id) {
+ ret = -ENODEV;
dev_err(&st->sd.spi->dev, "device ID query failed\n");
goto out;
}
From: Evan Quan <[email protected]>
commit 1a0b713c73688c6bafbe6faf8c90390b11b26fc6 upstream.
No MGpuFanBoost setting for those ASICs which do not support it.
Otherwise, it may breaks their fan control feature.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1580
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Kenneth Feng <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 9 +++++++++
drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 10 ++++++++++
2 files changed, 19 insertions(+)
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
@@ -2606,6 +2606,8 @@ static ssize_t navi10_get_gpu_metrics(st
static int navi10_enable_mgpu_fan_boost(struct smu_context *smu)
{
+ struct smu_table_context *table_context = &smu->smu_table;
+ PPTable_t *smc_pptable = table_context->driver_pptable;
struct amdgpu_device *adev = smu->adev;
uint32_t param = 0;
@@ -2613,6 +2615,13 @@ static int navi10_enable_mgpu_fan_boost(
if (adev->asic_type == CHIP_NAVI12)
return 0;
+ /*
+ * Skip the MGpuFanBoost setting for those ASICs
+ * which do not support it
+ */
+ if (!smc_pptable->MGpuFanBoostLimitRpm)
+ return 0;
+
/* Workaround for WS SKU */
if (adev->pdev->device == 0x7312 &&
adev->pdev->revision == 0)
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
@@ -2715,6 +2715,16 @@ static ssize_t sienna_cichlid_get_gpu_me
static int sienna_cichlid_enable_mgpu_fan_boost(struct smu_context *smu)
{
+ struct smu_table_context *table_context = &smu->smu_table;
+ PPTable_t *smc_pptable = table_context->driver_pptable;
+
+ /*
+ * Skip the MGpuFanBoost setting for those ASICs
+ * which do not support it
+ */
+ if (!smc_pptable->MGpuFanBoostLimitRpm)
+ return 0;
+
return smu_cmn_send_smc_msg_with_param(smu,
SMU_MSG_SetMGpuFanBoostLimitRpm,
0,
From: Jonathan Cameron <[email protected]>
commit a1caeebab07e9d72eec534489f47964782b93ba9 upstream.
Add space for the timestamp to be inserted. Also ensure correct
alignment for passing to iio_push_to_buffers_with_timestamp()
Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7768-1.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -166,6 +166,10 @@ struct ad7768_state {
* transfer buffers to live in their own cache lines.
*/
union {
+ struct {
+ __be32 chan;
+ s64 timestamp;
+ } scan;
__be32 d32;
u8 d8[2];
} data ____cacheline_aligned;
@@ -459,11 +463,11 @@ static irqreturn_t ad7768_trigger_handle
mutex_lock(&st->lock);
- ret = spi_read(st->spi, &st->data.d32, 3);
+ ret = spi_read(st->spi, &st->data.scan.chan, 3);
if (ret < 0)
goto err_unlock;
- iio_push_to_buffers_with_timestamp(indio_dev, &st->data.d32,
+ iio_push_to_buffers_with_timestamp(indio_dev, &st->data.scan,
iio_get_time_ns(indio_dev));
iio_trigger_notify_done(indio_dev->trig);
From: Randy Wright <[email protected]>
commit e0e24208792080135248f23fdf6d51aa2e04df05 upstream.
Add support for new HPE serial device. It is MSI enabled,
but otherwise similar to legacy HP server serial devices.
Tested-by: Jerry Hoemann <[email protected]>
Signed-off-by: Randy Wright <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -56,6 +56,8 @@ struct serial_private {
int line[];
};
+#define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e
+
static const struct pci_device_id pci_use_msi[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x1000) },
@@ -63,6 +65,8 @@ static const struct pci_device_id pci_us
0xA000, 0x1000) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
0xA000, 0x1000) },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ PCI_ANY_ID, PCI_ANY_ID) },
{ }
};
@@ -1998,6 +2002,16 @@ static struct pci_serial_quirk pci_seria
.setup = pci_hp_diva_setup,
},
/*
+ * HPE PCI serial device
+ */
+ {
+ .vendor = PCI_VENDOR_ID_HP_3PAR,
+ .device = PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_hp_diva_setup,
+ },
+ /*
* Intel
*/
{
@@ -4973,6 +4987,10 @@ static const struct pci_device_id serial
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_115200 },
+ /* HPE PCI serial device */
+ { PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_115200 },
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
From: Andrew Jeffery <[email protected]>
commit df8f2be2fd0b44b2cb6077068f52e05f0ac40897 upstream.
Aspeed Virtual UARTs directly bridge e.g. the system console UART on the
LPC bus to the UART interface on the BMC's internal APB. As such there's
no RS-232 signalling involved - the UART interfaces on each bus are
directly connected as the producers and consumers of the one set of
FIFOs.
The APB in the AST2600 generally runs at 100MHz while the LPC bus peaks
at 33MHz. The difference in clock speeds exposes a race in the VUART
design where a Tx data burst on the APB interface can result in a byte
lost on the LPC interface. The symptom is LSR[DR] remains clear on the
LPC interface despite data being present in its Rx FIFO, while LSR[THRE]
remains clear on the APB interface as the host has not consumed the data
the BMC has transmitted. In this state, the UART has stalled and no
further data can be transmitted without manual intervention (e.g.
resetting the FIFOs, resulting in loss of data).
The recommended work-around is to insert a read cycle on the APB
interface between writes to THR.
Cc: ChiaWei Wang <[email protected]>
Tested-by: ChiaWei Wang <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Andrew Jeffery <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 +
drivers/tty/serial/8250/8250_port.c | 12 ++++++++++++
3 files changed, 14 insertions(+)
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -88,6 +88,7 @@ struct serial8250_config {
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */
+#define UART_BUG_TXRACE (1 << 5) /* UART Tx fails to set remote DR */
#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -403,6 +403,7 @@ static int aspeed_vuart_probe(struct pla
port.port.status = UPSTAT_SYNC_FIFO;
port.port.dev = &pdev->dev;
port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+ port.bugs |= UART_BUG_TXRACE;
rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
if (rc < 0)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1815,6 +1815,18 @@ void serial8250_tx_chars(struct uart_825
count = up->tx_loadsz;
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ if (up->bugs & UART_BUG_TXRACE) {
+ /*
+ * The Aspeed BMC virtual UARTs have a bug where data
+ * may get stuck in the BMC's Tx FIFO from bursts of
+ * writes on the APB interface.
+ *
+ * Delay back-to-back writes by a read cycle to avoid
+ * stalling the VUART. Read a register that won't have
+ * side-effects and discard the result.
+ */
+ serial_in(up, UART_SCR);
+ }
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
From: Alexandru Ardelean <[email protected]>
commit b0f27fca5a6c7652e265aae6a4452ce2f2ed64da upstream.
This change fixes a corner-case, where for a zero regulator value, the
driver would exit early, initializing the driver only partially.
The driver would be in an unknown state.
This change reworks the code to check regulator_voltage() return value
for negative (error) first, and return early. This is the more common
idiom.
Also, this change is removing the 'voltage_uv' variable and using the 'ret'
value directly. The only place where 'voltage_uv' is being used is to
compute the internal reference voltage, and the type of this variable is
'int' (same are for 'ret'). Using only 'ret' avoids having to assign it on
the error path.
Fixes: ab0afa65bbc7 ("staging: iio: adc: ad7192: fail probe on get_voltage")
Cc: Alexandru Tachici <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7192.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -912,7 +912,7 @@ static int ad7192_probe(struct spi_devic
{
struct ad7192_state *st;
struct iio_dev *indio_dev;
- int ret, voltage_uv = 0;
+ int ret;
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ?\n");
@@ -949,15 +949,12 @@ static int ad7192_probe(struct spi_devic
goto error_disable_avdd;
}
- voltage_uv = regulator_get_voltage(st->avdd);
-
- if (voltage_uv > 0) {
- st->int_vref_mv = voltage_uv / 1000;
- } else {
- ret = voltage_uv;
+ ret = regulator_get_voltage(st->avdd);
+ if (ret < 0) {
dev_err(&spi->dev, "Device tree error, reference voltage undefined\n");
goto error_disable_avdd;
}
+ st->int_vref_mv = ret / 1000;
spi_set_drvdata(spi, indio_dev);
st->chip_info = of_device_get_match_data(&spi->dev);
From: Johan Hovold <[email protected]>
commit 746e4acf87bcacf1406e05ef24a0b7139147c63e upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
Fixes: 5638e4d92e77 ("USB: add PlayStation 2 Trance Vibrator driver")
Cc: [email protected] # 2.6.19
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/trancevibrator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -61,9 +61,9 @@ static ssize_t speed_store(struct device
/* Set speed */
retval = usb_control_msg(tv->udev, usb_sndctrlpipe(tv->udev, 0),
0x01, /* vendor request: set speed */
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
tv->speed, /* speed value */
- 0, NULL, 0, USB_CTRL_GET_TIMEOUT);
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval) {
tv->speed = old;
dev_dbg(&tv->udev->dev, "retval = %d\n", retval);
From: Zhu Lingshan <[email protected]>
commit e44b49f623c77bee7451f1a82ccfb969c1028ae2 upstream.
This reverts commit a979a6aa009f3c99689432e0cdb5402a4463fb88.
The reverted commit may cause VM freeze on arm64 with GICv4,
where stopping a consumer is implemented by suspending the VM.
Should the connect fail, the VM will not be resumed, which
is a bit of a problem.
It also erroneously calls the producer destructor unconditionally,
which is unexpected.
Reported-by: Shaokun Zhang <[email protected]>
Suggested-by: Marc Zyngier <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Tested-by: Shaokun Zhang <[email protected]>
Signed-off-by: Zhu Lingshan <[email protected]>
[maz: tags and cc-stable, commit message update]
Signed-off-by: Marc Zyngier <[email protected]>
Fixes: a979a6aa009f ("irqbypass: do not start cons/prod when failed connect")
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
virt/lib/irqbypass.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/virt/lib/irqbypass.c
+++ b/virt/lib/irqbypass.c
@@ -40,21 +40,17 @@ static int __connect(struct irq_bypass_p
if (prod->add_consumer)
ret = prod->add_consumer(prod, cons);
- if (ret)
- goto err_add_consumer;
-
- ret = cons->add_producer(cons, prod);
- if (ret)
- goto err_add_producer;
+ if (!ret) {
+ ret = cons->add_producer(cons, prod);
+ if (ret && prod->del_consumer)
+ prod->del_consumer(prod, cons);
+ }
if (cons->start)
cons->start(cons);
if (prod->start)
prod->start(prod);
-err_add_producer:
- if (prod->del_consumer)
- prod->del_consumer(prod, cons);
-err_add_consumer:
+
return ret;
}
From: Kevin Wang <[email protected]>
commit ba515a5821dc0d101ded0379b14b1d1471ebfaba upstream.
1.correct KFD SDMA RLC queue register offset error.
(all sdma rlc register offset is base on SDMA0.RLC0_RLC0_RB_CNTL)
2.HQD_N_REGS (19+6+7+12)
12: the 2 more resgisters than navi1x (SDMAx_RLCy_MIDCMD_DATA{9,10})
the patch also can be fixed NULL pointer issue when read
/sys/kernel/debug/kfd/hqds on sienna_cichlid chip.
Signed-off-by: Kevin Wang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c
@@ -157,16 +157,16 @@ static uint32_t get_sdma_rlc_reg_offset(
mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
break;
case 1:
- sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA1, 0,
+ sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0,
mmSDMA1_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
break;
case 2:
- sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA2, 0,
- mmSDMA2_RLC0_RB_CNTL) - mmSDMA2_RLC0_RB_CNTL;
+ sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0,
+ mmSDMA2_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
break;
case 3:
- sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA3, 0,
- mmSDMA3_RLC0_RB_CNTL) - mmSDMA2_RLC0_RB_CNTL;
+ sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0,
+ mmSDMA3_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
break;
}
@@ -451,7 +451,7 @@ static int hqd_sdma_dump_v10_3(struct kg
engine_id, queue_id);
uint32_t i = 0, reg;
#undef HQD_N_REGS
-#define HQD_N_REGS (19+6+7+10)
+#define HQD_N_REGS (19+6+7+12)
*dump = kmalloc(HQD_N_REGS*2*sizeof(uint32_t), GFP_KERNEL);
if (*dump == NULL)
From: Maximilian Luz <[email protected]>
commit 3c35d2a960c0077a4cb09bf4989f45d289332ea0 upstream.
Add device HID AMDI0022 to the AMD UART controller driver match table
and create a platform device for it. This controller can be found on
Microsoft Surface Laptop 4 devices and seems similar enough that we can
just copy the existing AMDI0020 entries.
Cc: <[email protected]> # 5.10+
Tested-by: Sachi King <[email protected]>
Acked-by: Andy Shevchenko <[email protected]> # for 8250_dw part
Signed-off-by: Maximilian Luz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpi_apd.c | 1 +
drivers/tty/serial/8250/8250_dw.c | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -226,6 +226,7 @@ static const struct acpi_device_id acpi_
{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
{ "AMD0020", APD_ADDR(cz_uart_desc) },
{ "AMDI0020", APD_ADDR(cz_uart_desc) },
+ { "AMDI0022", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
{ "AMD0040", APD_ADDR(fch_misc_desc)},
{ "HYGO0010", APD_ADDR(wt_i2c_desc) },
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -714,6 +714,7 @@ static const struct acpi_device_id dw825
{ "APMC0D08", 0},
{ "AMD0020", 0 },
{ "AMDI0020", 0 },
+ { "AMDI0022", 0 },
{ "BRCM2032", 0 },
{ "HISI0031", 0 },
{ },
From: James Zhu <[email protected]>
commit 2fb536ea42d557f39f70c755f68e1aa1ad466c55 upstream.
Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
@@ -321,6 +321,8 @@ static int vcn_v2_5_hw_fini(void *handle
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
int i;
+ cancel_delayed_work_sync(&adev->vcn.idle_work);
+
for (i = 0; i < adev->vcn.num_vcn_inst; ++i) {
if (adev->vcn.harvest_config & (1 << i))
continue;
From: Yoshihiro Shimoda <[email protected]>
commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.
The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
usb3_request_done_pipen() so that usb3_start_pipen() is possible
to cause a race when getting usb3_first_req like below:
renesas_usb3_ep_queue()
spin_lock_irqsave()
list_add_tail()
spin_unlock_irqrestore()
usb3_start_pipen()
usb3_first_req = usb3_get_request() --- [1]
--- interrupt ---
usb3_irq_dma_int()
usb3_request_done_pipen()
usb3_get_request()
usb3_start_pipen()
usb3_first_req = usb3_get_request()
...
(the req is possible to be finished in the interrupt)
The usb3_first_req [1] above may have been finished after the interrupt
ended so that this driver caused to start a transfer wrongly. To fix this
issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
in the same section.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <[email protected]>
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/renesas_usb3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1488,7 +1488,7 @@ static void usb3_start_pipen(struct rene
struct renesas_usb3_request *usb3_req)
{
struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
- struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep);
+ struct renesas_usb3_request *usb3_req_first;
unsigned long flags;
int ret = -EAGAIN;
u32 enable_bits = 0;
@@ -1496,7 +1496,8 @@ static void usb3_start_pipen(struct rene
spin_lock_irqsave(&usb3->lock, flags);
if (usb3_ep->halt || usb3_ep->started)
goto out;
- if (usb3_req != usb3_req_first)
+ usb3_req_first = __usb3_get_request(usb3_ep);
+ if (!usb3_req_first || usb3_req != usb3_req_first)
goto out;
if (usb3_pn_change(usb3, usb3_ep->num) < 0)
From: Jonathan Cameron <[email protected]>
commit 4573472315f0fa461330545ff2aa2f6da0b1ae76 upstream.
If the devm_regulator_get() call succeeded but not the regulator_enable()
then regulator_disable() would be called on a regulator that was not
enabled.
Fix this by moving regulator enabling / disabling over to
devm_ management via devm_add_action_or_reset.
Alexandru's sign-off here because he pulled Jonathan's patch into
a larger set which Jonathan then applied.
Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support")
Reviewed-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7124.c | 29 +++++++++++++----------------
1 file changed, 13 insertions(+), 16 deletions(-)
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -707,6 +707,11 @@ static int ad7124_setup(struct ad7124_st
return ret;
}
+static void ad7124_reg_disable(void *r)
+{
+ regulator_disable(r);
+}
+
static int ad7124_probe(struct spi_device *spi)
{
const struct ad7124_chip_info *info;
@@ -752,17 +757,20 @@ static int ad7124_probe(struct spi_devic
ret = regulator_enable(st->vref[i]);
if (ret)
return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7124_reg_disable,
+ st->vref[i]);
+ if (ret)
+ return ret;
}
st->mclk = devm_clk_get(&spi->dev, "mclk");
- if (IS_ERR(st->mclk)) {
- ret = PTR_ERR(st->mclk);
- goto error_regulator_disable;
- }
+ if (IS_ERR(st->mclk))
+ return PTR_ERR(st->mclk);
ret = clk_prepare_enable(st->mclk);
if (ret < 0)
- goto error_regulator_disable;
+ return ret;
ret = ad7124_soft_reset(st);
if (ret < 0)
@@ -792,11 +800,6 @@ error_remove_trigger:
ad_sd_cleanup_buffer_and_trigger(indio_dev);
error_clk_disable_unprepare:
clk_disable_unprepare(st->mclk);
-error_regulator_disable:
- for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) {
- if (!IS_ERR_OR_NULL(st->vref[i]))
- regulator_disable(st->vref[i]);
- }
return ret;
}
@@ -805,17 +808,11 @@ static int ad7124_remove(struct spi_devi
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad7124_state *st = iio_priv(indio_dev);
- int i;
iio_device_unregister(indio_dev);
ad_sd_cleanup_buffer_and_trigger(indio_dev);
clk_disable_unprepare(st->mclk);
- for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) {
- if (!IS_ERR_OR_NULL(st->vref[i]))
- regulator_disable(st->vref[i]);
- }
-
return 0;
}
From: James Zhu <[email protected]>
commit ff48f6dbf0ff896c98d167a67a5b975fb034356b upstream.
Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c
@@ -172,6 +172,8 @@ static int jpeg_v2_0_hw_fini(void *handl
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+ cancel_delayed_work_sync(&adev->vcn.idle_work);
+
if (adev->jpeg.cur_state != AMD_PG_STATE_GATE &&
RREG32_SOC15(JPEG, 0, mmUVD_JRBC_STATUS))
jpeg_v2_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
From: Christian Gmeiner <[email protected]>
commit 9808f9be31c68af43f6e531f2c851ebb066513fe upstream.
In commit 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
the way the irq gets allocated was changed. With that change the
handling FL_NOIRQ got lost. Restore the old behaviour.
Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
Cc: <[email protected]>
Signed-off-by: Christian Gmeiner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 29 +++++++++++++++++------------
1 file changed, 17 insertions(+), 12 deletions(-)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3958,21 +3958,26 @@ pciserial_init_ports(struct pci_dev *dev
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = board->base_baud * 16;
- if (pci_match_id(pci_use_msi, dev)) {
- dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
- pci_set_master(dev);
- rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (board->flags & FL_NOIRQ) {
+ uart.port.irq = 0;
} else {
- dev_dbg(&dev->dev, "Using legacy interrupts\n");
- rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
- }
- if (rc < 0) {
- kfree(priv);
- priv = ERR_PTR(rc);
- goto err_deinit;
+ if (pci_match_id(pci_use_msi, dev)) {
+ dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
+ pci_set_master(dev);
+ rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+ } else {
+ dev_dbg(&dev->dev, "Using legacy interrupts\n");
+ rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+ }
+ if (rc < 0) {
+ kfree(priv);
+ priv = ERR_PTR(rc);
+ goto err_deinit;
+ }
+
+ uart.port.irq = pci_irq_vector(dev, 0);
}
- uart.port.irq = pci_irq_vector(dev, 0);
uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {
From: Sriram R <[email protected]>
commit 62a8ff67eba52dae9b107e1fb8827054ed00a265 upstream.
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047
Cc: [email protected]
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 61 ++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2108,14 +2108,62 @@ static void ath10k_htt_rx_h_unchain(stru
ath10k_unchain_msdu(amsdu, unchain_cnt);
}
+static bool ath10k_htt_rx_validate_amsdu(struct ath10k *ar,
+ struct sk_buff_head *amsdu)
+{
+ u8 *subframe_hdr;
+ struct sk_buff *first;
+ bool is_first, is_last;
+ struct htt_rx_desc *rxd;
+ struct ieee80211_hdr *hdr;
+ size_t hdr_len, crypto_len;
+ enum htt_rx_mpdu_encrypt_type enctype;
+ int bytes_aligned = ar->hw_params.decap_align_bytes;
+
+ first = skb_peek(amsdu);
+
+ rxd = (void *)first->data - sizeof(*rxd);
+ hdr = (void *)rxd->rx_hdr_status;
+
+ is_first = !!(rxd->msdu_end.common.info0 &
+ __cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU));
+ is_last = !!(rxd->msdu_end.common.info0 &
+ __cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU));
+
+ /* Return in case of non-aggregated msdu */
+ if (is_first && is_last)
+ return true;
+
+ /* First msdu flag is not set for the first msdu of the list */
+ if (!is_first)
+ return false;
+
+ enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+ RX_MPDU_START_INFO0_ENCRYPT_TYPE);
+
+ hdr_len = ieee80211_hdrlen(hdr->frame_control);
+ crypto_len = ath10k_htt_rx_crypto_param_len(ar, enctype);
+
+ subframe_hdr = (u8 *)hdr + round_up(hdr_len, bytes_aligned) +
+ crypto_len;
+
+ /* Validate if the amsdu has a proper first subframe.
+ * There are chances a single msdu can be received as amsdu when
+ * the unauthenticated amsdu flag of a QoS header
+ * gets flipped in non-SPP AMSDU's, in such cases the first
+ * subframe has llc/snap header in place of a valid da.
+ * return false if the da matches rfc1042 pattern
+ */
+ if (ether_addr_equal(subframe_hdr, rfc1042_header))
+ return false;
+
+ return true;
+}
+
static bool ath10k_htt_rx_amsdu_allowed(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *rx_status)
{
- /* FIXME: It might be a good idea to do some fuzzy-testing to drop
- * invalid/dangerous frames.
- */
-
if (!rx_status->freq) {
ath10k_dbg(ar, ATH10K_DBG_HTT, "no channel configured; ignoring frame(s)!\n");
return false;
@@ -2126,6 +2174,11 @@ static bool ath10k_htt_rx_amsdu_allowed(
return false;
}
+ if (!ath10k_htt_rx_validate_amsdu(ar, amsdu)) {
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "invalid amsdu received\n");
+ return false;
+ }
+
return true;
}
From: James Zhu <[email protected]>
commit 0c6013377b4027e69d8f3e63b6bf556b6cb87802 upstream.
Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c
@@ -262,6 +262,8 @@ static int vcn_v2_0_hw_fini(void *handle
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+ cancel_delayed_work_sync(&adev->vcn.idle_work);
+
if ((adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) ||
(adev->vcn.cur_state != AMD_PG_STATE_GATE &&
RREG32_SOC15(VCN, 0, mmUVD_STATUS)))
From: James Zhu <[email protected]>
commit b95f045ea35673572ef46d6483ad8bd6d353d63c upstream.
Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
@@ -232,9 +232,13 @@ static int vcn_v1_0_hw_fini(void *handle
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+ cancel_delayed_work_sync(&adev->vcn.idle_work);
+
if ((adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) ||
- RREG32_SOC15(VCN, 0, mmUVD_STATUS))
+ (adev->vcn.cur_state != AMD_PG_STATE_GATE &&
+ RREG32_SOC15(VCN, 0, mmUVD_STATUS))) {
vcn_v1_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
+ }
return 0;
}
From: Michael Ellerman <[email protected]>
[ Upstream commit ff2c395b9257f0e617f9cd212893f3c72c80ee6c ]
Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED.
That tells the lib.mk logic that the files it references are to be
generated by the Makefile.
Having done that we don't need to override the all rule.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/gpio/Makefile | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index 32bdc978a711..c85fb5acf5f4 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -11,22 +11,20 @@ LDLIBS += $(VAR_LDLIBS)
TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh
-TEST_PROGS_EXTENDED := gpio-mockup-chardev
+TEST_GEN_PROGS_EXTENDED := gpio-mockup-chardev
GPIODIR := $(realpath ../../../gpio)
GPIOOBJ := gpio-utils.o
-all: $(TEST_PROGS_EXTENDED)
-
override define CLEAN
- $(RM) $(TEST_PROGS_EXTENDED)
+ $(RM) $(TEST_GEN_PROGS_EXTENDED)
$(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean
endef
KSFT_KHDR_INSTALL := 1
include ../lib.mk
-$(TEST_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ)
+$(TEST_GEN_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ)
$(GPIODIR)/$(GPIOOBJ):
$(MAKE) OUTPUT=$(GPIODIR)/ -C $(GPIODIR)
--
2.30.2
From: Thinh Nguyen <[email protected]>
commit 25dda9fc56bd90d45f9a4516bcfa5211e61b4290 upstream.
The driver incorrectly uses req->num_pending_sgs to track both the
number of pending and queued SG entries. It only prepares the next
request if the previous is done, and it doesn't update num_pending_sgs
until there is TRB completion interrupt. This may starve the controller
of more TRBs until the num_pending_sgs is decremented.
Fix this by decrementing the num_pending_sgs after they are queued and
properly track both num_mapped_sgs and num_queued_sgs.
Fixes: c96e6725db9d ("usb: dwc3: gadget: Correct the logic for queuing sgs")
Cc: <[email protected]>
Reported-by: Michael Grzeschik <[email protected]>
Tested-by: Michael Grzeschik <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/ba24591dbcaad8f244a3e88bd449bb7205a5aec3.1620874069.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1236,6 +1236,7 @@ static int dwc3_prepare_trbs_sg(struct d
req->start_sg = sg_next(s);
req->num_queued_sgs++;
+ req->num_pending_sgs--;
/*
* The number of pending SG entries may not correspond to the
@@ -1243,7 +1244,7 @@ static int dwc3_prepare_trbs_sg(struct d
* don't include unused SG entries.
*/
if (length == 0) {
- req->num_pending_sgs -= req->request.num_mapped_sgs - req->num_queued_sgs;
+ req->num_pending_sgs = 0;
break;
}
@@ -2784,15 +2785,15 @@ static int dwc3_gadget_ep_reclaim_trb_sg
struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
struct scatterlist *sg = req->sg;
struct scatterlist *s;
- unsigned int pending = req->num_pending_sgs;
+ unsigned int num_queued = req->num_queued_sgs;
unsigned int i;
int ret = 0;
- for_each_sg(sg, s, pending, i) {
+ for_each_sg(sg, s, num_queued, i) {
trb = &dep->trb_pool[dep->trb_dequeue];
req->sg = sg_next(s);
- req->num_pending_sgs--;
+ req->num_queued_sgs--;
ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req,
trb, event, status, true);
@@ -2815,7 +2816,7 @@ static int dwc3_gadget_ep_reclaim_trb_li
static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
{
- return req->num_pending_sgs == 0;
+ return req->num_pending_sgs == 0 && req->num_queued_sgs == 0;
}
static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
@@ -2824,7 +2825,7 @@ static int dwc3_gadget_ep_cleanup_comple
{
int ret;
- if (req->num_pending_sgs)
+ if (req->request.num_mapped_sgs)
ret = dwc3_gadget_ep_reclaim_trb_sg(dep, req, event,
status);
else
From: Jonathan Cameron <[email protected]>
commit e32fe6d90f44922ccbb94016cfc3c238359e3e39 upstream.
Found by inspection.
If the internal clock source is being used, the driver doesn't
call clk_prepare_enable() and as such we should not call
clk_disable_unprepare()
Use the same condition to protect the disable path as is used
on the enable one. Note this will all get simplified when
the driver moves over to a full devm_ flow, but that would make
backporting the fix harder.
Fix obviously predates move out of staging, but backporting will
become more complex (and is unlikely to happen), hence that patch
is given in the fixes tag.
Alexandru's sign off is here because he added this patch into
a larger series that Jonathan then applied.
Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
Cc: Alexandru Tachici <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7192.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -1014,7 +1014,9 @@ static int ad7192_probe(struct spi_devic
return 0;
error_disable_clk:
- clk_disable_unprepare(st->mclk);
+ if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+ st->clock_sel == AD7192_CLK_EXT_MCLK2)
+ clk_disable_unprepare(st->mclk);
error_remove_trigger:
ad_sd_cleanup_buffer_and_trigger(indio_dev);
error_disable_dvdd:
@@ -1031,7 +1033,9 @@ static int ad7192_remove(struct spi_devi
struct ad7192_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- clk_disable_unprepare(st->mclk);
+ if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+ st->clock_sel == AD7192_CLK_EXT_MCLK2)
+ clk_disable_unprepare(st->mclk);
ad_sd_cleanup_buffer_and_trigger(indio_dev);
regulator_disable(st->dvdd);
From: Pavel Skripkin <[email protected]>
commit 46a8b29c6306d8bbfd92b614ef65a47c900d8e70 upstream.
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.
backtrace:
[<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
[<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
[<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
[<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728
Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: [email protected]
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/smsc75xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1483,7 +1483,7 @@ static int smsc75xx_bind(struct usbnet *
ret = smsc75xx_wait_ready(dev, 0);
if (ret < 0) {
netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
- return ret;
+ goto err;
}
smsc75xx_init_mac_address(dev);
@@ -1492,7 +1492,7 @@ static int smsc75xx_bind(struct usbnet *
ret = smsc75xx_reset(dev);
if (ret < 0) {
netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
- return ret;
+ goto err;
}
dev->net->netdev_ops = &smsc75xx_netdev_ops;
@@ -1502,6 +1502,10 @@ static int smsc75xx_bind(struct usbnet *
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
dev->net->max_mtu = MAX_SINGLE_PACKET_SIZE;
return 0;
+
+err:
+ kfree(pdata);
+ return ret;
}
static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
From: Dan Carpenter <[email protected]>
commit 769b01ea68b6c49dc3cde6adf7e53927dacbd3a8 upstream.
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left.
Fixes: 16b374ca439f ("NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/filelayout/filelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -718,7 +718,7 @@ filelayout_decode_layout(struct pnfs_lay
if (unlikely(!p))
goto out_err;
fl->fh_array[i]->size = be32_to_cpup(p++);
- if (sizeof(struct nfs_fh) < fl->fh_array[i]->size) {
+ if (fl->fh_array[i]->size > NFS_MAXFHSIZE) {
printk(KERN_ERR "NFS: Too big fh %d received %d\n",
i, fl->fh_array[i]->size);
goto out_err;
From: Trond Myklebust <[email protected]>
commit 56517ab958b7c11030e626250c00b9b1a24b41eb upstream.
Ensure that nfs_pageio_error_cleanup() resets the mirror array contents,
so that the structure reflects the fact that it is now empty.
Also change the test in nfs_pageio_do_add_request() to be more robust by
checking whether or not the list is empty rather than relying on the
value of pg_count.
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1094,15 +1094,16 @@ nfs_pageio_do_add_request(struct nfs_pag
struct nfs_page *prev = NULL;
unsigned int size;
- if (mirror->pg_count != 0) {
- prev = nfs_list_entry(mirror->pg_list.prev);
- } else {
+ if (list_empty(&mirror->pg_list)) {
if (desc->pg_ops->pg_init)
desc->pg_ops->pg_init(desc, req);
if (desc->pg_error < 0)
return 0;
mirror->pg_base = req->wb_pgbase;
- }
+ mirror->pg_count = 0;
+ mirror->pg_recoalesce = 0;
+ } else
+ prev = nfs_list_entry(mirror->pg_list.prev);
if (desc->pg_maxretrans && req->wb_nio > desc->pg_maxretrans) {
if (NFS_SERVER(desc->pg_inode)->flags & NFS_MOUNT_SOFTERR)
From: Bjorn Andersson <[email protected]>
commit acf5631c239dfc53489f739c4ad47f490c5181ff upstream.
In typec_mux_match() "nval" is assigned the number of elements in the
"svid" fwnode property, then the variable is used to store the success
of the read and finally attempts to loop between 0 and "success" - i.e.
not at all - and the code returns indicating that no match was found.
Fix this by using a separate variable to track the success of the read,
to allow the loop to get a change to find a match.
Fixes: 96a6d031ca99 ("usb: typec: mux: Find the muxes by also matching against the device node")
Reviewed-by: Heikki Krogerus <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/mux.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -191,6 +191,7 @@ static void *typec_mux_match(struct fwno
bool match;
int nval;
u16 *val;
+ int ret;
int i;
/*
@@ -218,10 +219,10 @@ static void *typec_mux_match(struct fwno
if (!val)
return ERR_PTR(-ENOMEM);
- nval = fwnode_property_read_u16_array(fwnode, "svid", val, nval);
- if (nval < 0) {
+ ret = fwnode_property_read_u16_array(fwnode, "svid", val, nval);
+ if (ret < 0) {
kfree(val);
- return ERR_PTR(nval);
+ return ERR_PTR(ret);
}
for (i = 0; i < nval; i++) {
From: Rafael J. Wysocki <[email protected]>
commit 80dd33cf72d1ab4f0af303f1fa242c6d6c8d328f upstream.
When device_link_free() drops references to the supplier and
consumer devices of the device link going away and the reference
being dropped turns out to be the last one for any of those
device objects, its ->release callback will be invoked and it
may sleep which goes against the SRCU callback execution
requirements.
To address this issue, make the device link removal code carry out
the device_link_free() actions preceded by SRCU synchronization from
a separate work item (the "long" workqueue is used for that, because
it does not matter when the device link memory is released and it may
take time to get to that point) instead of using SRCU callbacks.
While at it, make the code work analogously when SRCU is not enabled
to reduce the differences between the SRCU and non-SRCU cases.
Fixes: 843e600b8a2b ("driver core: Fix sleeping in invalid context during device link deletion")
Cc: stable <[email protected]>
Reported-by: chenxiang (M) <[email protected]>
Tested-by: chenxiang (M) <[email protected]>
Reviewed-by: Saravana Kannan <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/5722787.lOV4Wx5bFT@kreacher
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/core.c | 37 +++++++++++++++++++++++--------------
include/linux/device.h | 6 ++----
2 files changed, 25 insertions(+), 18 deletions(-)
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -83,6 +83,11 @@ int device_links_read_lock_held(void)
{
return srcu_read_lock_held(&device_links_srcu);
}
+
+static void device_link_synchronize_removal(void)
+{
+ synchronize_srcu(&device_links_srcu);
+}
#else /* !CONFIG_SRCU */
static DECLARE_RWSEM(device_links_lock);
@@ -113,6 +118,10 @@ int device_links_read_lock_held(void)
return lockdep_is_held(&device_links_lock);
}
#endif
+
+static inline void device_link_synchronize_removal(void)
+{
+}
#endif /* !CONFIG_SRCU */
static bool device_is_ancestor(struct device *dev, struct device *target)
@@ -332,8 +341,13 @@ static struct attribute *devlink_attrs[]
};
ATTRIBUTE_GROUPS(devlink);
-static void device_link_free(struct device_link *link)
+static void device_link_release_fn(struct work_struct *work)
{
+ struct device_link *link = container_of(work, struct device_link, rm_work);
+
+ /* Ensure that all references to the link object have been dropped. */
+ device_link_synchronize_removal();
+
while (refcount_dec_not_one(&link->rpm_active))
pm_runtime_put(link->supplier);
@@ -342,24 +356,19 @@ static void device_link_free(struct devi
kfree(link);
}
-#ifdef CONFIG_SRCU
-static void __device_link_free_srcu(struct rcu_head *rhead)
-{
- device_link_free(container_of(rhead, struct device_link, rcu_head));
-}
-
static void devlink_dev_release(struct device *dev)
{
struct device_link *link = to_devlink(dev);
- call_srcu(&device_links_srcu, &link->rcu_head, __device_link_free_srcu);
-}
-#else
-static void devlink_dev_release(struct device *dev)
-{
- device_link_free(to_devlink(dev));
+ INIT_WORK(&link->rm_work, device_link_release_fn);
+ /*
+ * It may take a while to complete this work because of the SRCU
+ * synchronization in device_link_release_fn() and if the consumer or
+ * supplier devices get deleted when it runs, so put it into the "long"
+ * workqueue.
+ */
+ queue_work(system_long_wq, &link->rm_work);
}
-#endif
static struct class devlink_class = {
.name = "devlink",
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -570,7 +570,7 @@ struct device {
* @flags: Link flags.
* @rpm_active: Whether or not the consumer device is runtime-PM-active.
* @kref: Count repeated addition of the same link.
- * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks.
+ * @rm_work: Work structure used for removing the link.
* @supplier_preactivated: Supplier has been made active before consumer probe.
*/
struct device_link {
@@ -583,9 +583,7 @@ struct device_link {
u32 flags;
refcount_t rpm_active;
struct kref kref;
-#ifdef CONFIG_SRCU
- struct rcu_head rcu_head;
-#endif
+ struct work_struct rm_work;
bool supplier_preactivated; /* Owned by consumer probe. */
};
From: Thadeu Lima de Souza Cascardo <[email protected]>
commit 8da3a0b87f4f1c3a3bbc4bfb78cf68476e97d183 upstream.
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/cmtp/core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -392,6 +392,11 @@ int cmtp_add_connection(struct cmtp_conn
if (!(session->flags & BIT(CMTP_LOOPBACK))) {
err = cmtp_attach_device(session);
if (err < 0) {
+ /* Caller will call fput in case of failure, and so
+ * will cmtp_session kthread.
+ */
+ get_file(session->sock->file);
+
atomic_inc(&session->terminate);
wake_up_interruptible(sk_sleep(session->sock->sk));
up_write(&cmtp_session_sem);
From: Trond Myklebust <[email protected]>
commit 0d0ea309357dea0d85a82815f02157eb7fcda39f upstream.
The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list.
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1128,17 +1128,16 @@ static void nfs_pageio_doio(struct nfs_p
{
struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc);
-
if (!list_empty(&mirror->pg_list)) {
int error = desc->pg_ops->pg_doio(desc);
if (error < 0)
desc->pg_error = error;
- else
+ if (list_empty(&mirror->pg_list)) {
mirror->pg_bytes_written += mirror->pg_count;
- }
- if (list_empty(&mirror->pg_list)) {
- mirror->pg_count = 0;
- mirror->pg_base = 0;
+ mirror->pg_count = 0;
+ mirror->pg_base = 0;
+ mirror->pg_recoalesce = 0;
+ }
}
}
@@ -1228,7 +1227,6 @@ static int nfs_do_recoalesce(struct nfs_
do {
list_splice_init(&mirror->pg_list, &head);
- mirror->pg_bytes_written -= mirror->pg_count;
mirror->pg_count = 0;
mirror->pg_base = 0;
mirror->pg_recoalesce = 0;
From: zhouchuangao <[email protected]>
commit bb002388901151fe35b6697ab116f6ed0721a9ed upstream.
We set the state of the current process to TASK_KILLABLE via
prepare_to_wait(). Should we use fatal_signal_pending() to detect
the signal here?
Fixes: b4868b44c562 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE")
Signed-off-by: zhouchuangao <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1688,7 +1688,7 @@ static void nfs_set_open_stateid_locked(
rcu_read_unlock();
trace_nfs4_open_stateid_update_wait(state->inode, stateid, 0);
- if (!signal_pending(current)) {
+ if (!fatal_signal_pending(current)) {
if (schedule_timeout(5*HZ) == 0)
status = -EAGAIN;
else
@@ -3463,7 +3463,7 @@ static bool nfs4_refresh_open_old_statei
write_sequnlock(&state->seqlock);
trace_nfs4_close_stateid_update_wait(state->inode, dst, 0);
- if (signal_pending(current))
+ if (fatal_signal_pending(current))
status = -EINTR;
else
if (schedule_timeout(5*HZ) != 0)
From: Neil Armstrong <[email protected]>
commit 7cfc4ea78fc103ea51ecbacd9236abb5b1c490d2 upstream.
When main component is not probed, by example when the dw-hdmi module is
not loaded yet or in probe defer, the following crash appears on shutdown:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
pc : meson_drv_shutdown+0x24/0x50
lr : platform_drv_shutdown+0x20/0x30
...
Call trace:
meson_drv_shutdown+0x24/0x50
platform_drv_shutdown+0x20/0x30
device_shutdown+0x158/0x360
kernel_restart_prepare+0x38/0x48
kernel_restart+0x18/0x68
__do_sys_reboot+0x224/0x250
__arm64_sys_reboot+0x24/0x30
...
Simply check if the priv struct has been allocated before using it.
Fixes: fa0c16caf3d7 ("drm: meson_drv add shutdown function")
Reported-by: Stefan Agner <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Tested-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -485,11 +485,12 @@ static int meson_probe_remote(struct pla
static void meson_drv_shutdown(struct platform_device *pdev)
{
struct meson_drm *priv = dev_get_drvdata(&pdev->dev);
- struct drm_device *drm = priv->drm;
- DRM_DEBUG_DRIVER("\n");
- drm_kms_helper_poll_fini(drm);
- drm_atomic_helper_shutdown(drm);
+ if (!priv)
+ return;
+
+ drm_kms_helper_poll_fini(priv->drm);
+ drm_atomic_helper_shutdown(priv->drm);
}
static int meson_drv_probe(struct platform_device *pdev)
From: Saeed Mahameed <[email protected]>
commit 77ecd10d0a8aaa6e4871d8c63626e4c9fc5e47db upstream.
mlx5e_attach_netdev can be called prior to registering the netdevice:
Example stack:
ipoib_new_child_link ->
ipoib_intf_init->
rdma_init_netdev->
mlx5_rdma_setup_rn->
mlx5e_attach_netdev->
mlx5e_num_channels_changed ->
mlx5e_set_default_xps_cpumasks ->
netif_set_xps_queue ->
__netif_set_xps_queue -> kmalloc
If any later stage fails at any point after mlx5e_num_channels_changed()
returns, XPS allocated maps will never be freed as they
are only freed during netdev unregistration, which will never happen for
yet to be registered netdevs.
Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5385,6 +5385,11 @@ err_free_netdev:
return NULL;
}
+static void mlx5e_reset_channels(struct net_device *netdev)
+{
+ netdev_reset_tc(netdev);
+}
+
int mlx5e_attach_netdev(struct mlx5e_priv *priv)
{
const bool take_rtnl = priv->netdev->reg_state == NETREG_REGISTERED;
@@ -5438,6 +5443,7 @@ err_cleanup_tx:
profile->cleanup_tx(priv);
out:
+ mlx5e_reset_channels(priv->netdev);
set_bit(MLX5E_STATE_DESTROYING, &priv->state);
cancel_work_sync(&priv->update_stats_work);
return err;
@@ -5455,6 +5461,7 @@ void mlx5e_detach_netdev(struct mlx5e_pr
profile->cleanup_rx(priv);
profile->cleanup_tx(priv);
+ mlx5e_reset_channels(priv->netdev);
cancel_work_sync(&priv->update_stats_work);
}
From: Aya Levin <[email protected]>
commit 5e7923acbd86d0ff29269688d8a9c47ad091dd46 upstream.
Avoid division by zero in the error flow. In the driver TC number can be
either 1 or 8. When TC count is set to 1, driver zero netdev->num_tc.
Hence, need to convert it back from 0 to 1 in the error flow.
Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2920,7 +2920,7 @@ static int mlx5e_update_netdev_queues(st
int err;
old_num_txqs = netdev->real_num_tx_queues;
- old_ntc = netdev->num_tc;
+ old_ntc = netdev->num_tc ? : 1;
nch = priv->channels.params.num_channels;
ntc = priv->channels.params.num_tc;
From: Dima Chumak <[email protected]>
commit 97817fcc684ed01497bd19d0cd4dea699665b9cf upstream.
When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route,
lag activation can be missed if a stale (struct lag_mp)->mfi pointer
exists, which was associated with an older multipath route that had been
removed.
Normally, when a route is removed, it triggers mlx5_lag_fib_event(),
which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if
mlx5_lag_check_prereq() condition isn't met, for example when eswitch is
in legacy mode, the fib event is skipped and mfi pointer becomes stale.
Fix by resetting mfi pointer to NULL every time mlx5_lag_mp_init() is
called.
Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Dima Chumak <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
@@ -307,6 +307,11 @@ int mlx5_lag_mp_init(struct mlx5_lag *ld
struct lag_mp *mp = &ldev->lag_mp;
int err;
+ /* always clear mfi, as it might become stale when a route delete event
+ * has been missed
+ */
+ mp->mfi = NULL;
+
if (mp->fib_nb.notifier_call)
return 0;
@@ -335,4 +340,5 @@ void mlx5_lag_mp_cleanup(struct mlx5_lag
unregister_fib_notifier(&init_net, &mp->fib_nb);
destroy_workqueue(mp->wq);
mp->fib_nb.notifier_call = NULL;
+ mp->mfi = NULL;
}
From: Eli Cohen <[email protected]>
commit 7c9f131f366ab414691907fa0407124ea2b2f3bc upstream.
net/mlx5: Expose MPFS configuration API
MPFS is the multi physical function switch that bridges traffic between
the physical port and any physical functions associated with it. The
driver is required to add or remove MAC entries to properly forward
incoming traffic to the correct physical function.
We export the API to control MPFS so that other drivers, such as
mlx5_vdpa are able to add MAC addresses of their network interfaces.
The MAC address of the vdpa interface must be configured into the MPFS L2
address. Failing to do so could cause, in some NIC configurations, failure
to forward packets to the vdpa network device instance.
Fix this by adding calls to update the MPFS table.
CC: <[email protected]>
CC: <[email protected]>
CC: <[email protected]>
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 1 +
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 +
drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 3 +++
drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h | 5 +----
drivers/vdpa/mlx5/net/mlx5_vnet.c | 19 ++++++++++++++++++-
include/linux/mlx5/mpfs.h | 18 ++++++++++++++++++
6 files changed, 42 insertions(+), 5 deletions(-)
create mode 100644 include/linux/mlx5/mpfs.h
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
@@ -35,6 +35,7 @@
#include <linux/ipv6.h>
#include <linux/tcp.h>
#include <linux/mlx5/fs.h>
+#include <linux/mlx5/mpfs.h>
#include "en.h"
#include "lib/mpfs.h"
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -35,6 +35,7 @@
#include <linux/mlx5/mlx5_ifc.h>
#include <linux/mlx5/vport.h>
#include <linux/mlx5/fs.h>
+#include <linux/mlx5/mpfs.h>
#include "esw/acl/lgcy.h"
#include "mlx5_core.h"
#include "lib/eq.h"
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
@@ -33,6 +33,7 @@
#include <linux/etherdevice.h>
#include <linux/mlx5/driver.h>
#include <linux/mlx5/mlx5_ifc.h>
+#include <linux/mlx5/mpfs.h>
#include <linux/mlx5/eswitch.h>
#include "mlx5_core.h"
#include "lib/mpfs.h"
@@ -175,6 +176,7 @@ out:
mutex_unlock(&mpfs->lock);
return err;
}
+EXPORT_SYMBOL(mlx5_mpfs_add_mac);
int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac)
{
@@ -206,3 +208,4 @@ unlock:
mutex_unlock(&mpfs->lock);
return err;
}
+EXPORT_SYMBOL(mlx5_mpfs_del_mac);
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.h
@@ -84,12 +84,9 @@ struct l2addr_node {
#ifdef CONFIG_MLX5_MPFS
int mlx5_mpfs_init(struct mlx5_core_dev *dev);
void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev);
-int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac);
-int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac);
#else /* #ifndef CONFIG_MLX5_MPFS */
static inline int mlx5_mpfs_init(struct mlx5_core_dev *dev) { return 0; }
static inline void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev) {}
-static inline int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
-static inline int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
#endif
+
#endif
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -9,6 +9,7 @@
#include <linux/mlx5/vport.h>
#include <linux/mlx5/fs.h>
#include <linux/mlx5/device.h>
+#include <linux/mlx5/mpfs.h>
#include "mlx5_vnet.h"
#include "mlx5_vdpa_ifc.h"
#include "mlx5_vdpa.h"
@@ -1839,11 +1840,16 @@ static int mlx5_vdpa_set_map(struct vdpa
static void mlx5_vdpa_free(struct vdpa_device *vdev)
{
struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev);
+ struct mlx5_core_dev *pfmdev;
struct mlx5_vdpa_net *ndev;
ndev = to_mlx5_vdpa_ndev(mvdev);
free_resources(ndev);
+ if (!is_zero_ether_addr(ndev->config.mac)) {
+ pfmdev = pci_get_drvdata(pci_physfn(mvdev->mdev->pdev));
+ mlx5_mpfs_del_mac(pfmdev, ndev->config.mac);
+ }
mlx5_vdpa_free_resources(&ndev->mvdev);
mutex_destroy(&ndev->reslock);
}
@@ -1962,6 +1968,7 @@ static void init_mvqs(struct mlx5_vdpa_n
void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev)
{
struct virtio_net_config *config;
+ struct mlx5_core_dev *pfmdev;
struct mlx5_vdpa_dev *mvdev;
struct mlx5_vdpa_net *ndev;
u32 max_vqs;
@@ -1990,10 +1997,17 @@ void *mlx5_vdpa_add_dev(struct mlx5_core
if (err)
goto err_mtu;
+ if (!is_zero_ether_addr(config->mac)) {
+ pfmdev = pci_get_drvdata(pci_physfn(mdev->pdev));
+ err = mlx5_mpfs_add_mac(pfmdev, config->mac);
+ if (err)
+ goto err_mtu;
+ }
+
mvdev->vdev.dma_dev = mdev->device;
err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
if (err)
- goto err_mtu;
+ goto err_mpfs;
err = alloc_resources(ndev);
if (err)
@@ -2009,6 +2023,9 @@ err_reg:
free_resources(ndev);
err_res:
mlx5_vdpa_free_resources(&ndev->mvdev);
+err_mpfs:
+ if (!is_zero_ether_addr(config->mac))
+ mlx5_mpfs_del_mac(pfmdev, config->mac);
err_mtu:
mutex_destroy(&ndev->reslock);
put_device(&mvdev->vdev.dev);
--- /dev/null
+++ b/include/linux/mlx5/mpfs.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+ * Copyright (c) 2021 Mellanox Technologies Ltd.
+ */
+
+#ifndef _MLX5_MPFS_
+#define _MLX5_MPFS_
+
+struct mlx5_core_dev;
+
+#ifdef CONFIG_MLX5_MPFS
+int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac);
+int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac);
+#else /* #ifndef CONFIG_MLX5_MPFS */
+static inline int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
+static inline int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; }
+#endif
+
+#endif
From: Dima Chumak <[email protected]>
commit dca59f4a791960ec73fa15803faa0abe0f92ece2 upstream.
The result of dev_get_by_index_rcu() is not checked for NULL and then
gets dereferenced immediately.
Also, the RCU lock must be held by the caller of dev_get_by_index_rcu(),
which isn't satisfied by the call stack.
Fix by handling nullptr return value when iflink device is not found.
Add RCU locking around dev_get_by_index_rcu() to avoid possible adverse
effects while iterating over the net_device's hlist.
It is safe not to increment reference count of the net_device pointer in
case of a successful lookup, because it's already handled by VLAN code
during VLAN device registration (see register_vlan_dev and
netdev_upper_dev_link).
Fixes: 278748a95aa3 ("net/mlx5e: Offload TC e-switch rules with egress VLAN device")
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Dima Chumak <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -4025,8 +4025,12 @@ static int add_vlan_push_action(struct m
if (err)
return err;
- *out_dev = dev_get_by_index_rcu(dev_net(vlan_dev),
- dev_get_iflink(vlan_dev));
+ rcu_read_lock();
+ *out_dev = dev_get_by_index_rcu(dev_net(vlan_dev), dev_get_iflink(vlan_dev));
+ rcu_read_unlock();
+ if (!*out_dev)
+ return -ENODEV;
+
if (is_vlan_dev(*out_dev))
err = add_vlan_push_action(priv, attr, out_dev, action);
From: Jianbo Liu <[email protected]>
commit 442b3d7b671bcb779ebdad46edd08051eb8b28d9 upstream.
For remote mirroring, after the tunnel packets are received, they are
decapsulated and sent to representor, then re-encapsulated and sent
out over another tunnel. So reformat action is set only when the
destination is required to do encapsulation.
Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Ariel Levkovich <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c | 31 +++-------
1 file changed, 10 insertions(+), 21 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
@@ -171,19 +171,6 @@ mlx5_eswitch_termtbl_put(struct mlx5_esw
}
}
-static bool mlx5_eswitch_termtbl_is_encap_reformat(struct mlx5_pkt_reformat *rt)
-{
- switch (rt->reformat_type) {
- case MLX5_REFORMAT_TYPE_L2_TO_VXLAN:
- case MLX5_REFORMAT_TYPE_L2_TO_NVGRE:
- case MLX5_REFORMAT_TYPE_L2_TO_L2_TUNNEL:
- case MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL:
- return true;
- default:
- return false;
- }
-}
-
static void
mlx5_eswitch_termtbl_actions_move(struct mlx5_flow_act *src,
struct mlx5_flow_act *dst)
@@ -201,14 +188,6 @@ mlx5_eswitch_termtbl_actions_move(struct
memset(&src->vlan[1], 0, sizeof(src->vlan[1]));
}
}
-
- if (src->action & MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT &&
- mlx5_eswitch_termtbl_is_encap_reformat(src->pkt_reformat)) {
- src->action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
- dst->action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
- dst->pkt_reformat = src->pkt_reformat;
- src->pkt_reformat = NULL;
- }
}
static bool mlx5_eswitch_offload_is_uplink_port(const struct mlx5_eswitch *esw,
@@ -278,6 +257,14 @@ mlx5_eswitch_add_termtbl_rule(struct mlx
if (dest[i].type != MLX5_FLOW_DESTINATION_TYPE_VPORT)
continue;
+ if (attr->dests[num_vport_dests].flags & MLX5_ESW_DEST_ENCAP) {
+ term_tbl_act.action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
+ term_tbl_act.pkt_reformat = attr->dests[num_vport_dests].pkt_reformat;
+ } else {
+ term_tbl_act.action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
+ term_tbl_act.pkt_reformat = NULL;
+ }
+
/* get the terminating table for the action list */
tt = mlx5_eswitch_termtbl_get_create(esw, &term_tbl_act,
&dest[i], attr);
@@ -299,6 +286,8 @@ mlx5_eswitch_add_termtbl_rule(struct mlx
goto revert_changes;
/* create the FTE */
+ flow_act->action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
+ flow_act->pkt_reformat = NULL;
rule = mlx5_add_flow_rules(fdb, spec, flow_act, dest, num_dest);
if (IS_ERR(rule))
goto revert_changes;
From: Roi Dayan <[email protected]>
commit 83026d83186bc48bb41ee4872f339b83f31dfc55 upstream.
It could be the lag dev is null so stop processing the event.
In bond_enslave() the active/backup slave being set before setting the
upper dev so first event is without an upper dev.
After setting the upper dev with bond_master_upper_dev_link() there is
a second event and in that event we have an upper dev.
Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/rep/bond.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bond.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bond.c
@@ -223,6 +223,8 @@ static void mlx5e_rep_changelowerstate_e
rpriv = priv->ppriv;
fwd_vport_num = rpriv->rep->vport;
lag_dev = netdev_master_upper_dev_get(netdev);
+ if (!lag_dev)
+ return;
netdev_dbg(netdev, "lag_dev(%s)'s slave vport(%d) is txable(%d)\n",
lag_dev->name, fwd_vport_num, net_lag_port_dev_txable(netdev));
From: Geert Uytterhoeven <[email protected]>
commit 2ea2e019c190ee3973ef7bcaf829d8762e56e635 upstream.
The Receive FIFO Data Count Trigger field (RTRG[6:0]) in the Receive
FIFO Data Count Trigger Register (HSRTRGR) of HSCIF can only hold values
ranging from 0-127. As the FIFO size is equal to 128 on HSCIF, the user
can write an out-of-range value, touching reserved bits.
Fix this by limiting the trigger value to the FIFO size minus one.
Reverse the order of the checks, to avoid rx_trig becoming zero if the
FIFO size is one.
Note that this change has no impact on other SCIF variants, as their
maximum supported trigger value is lower than the FIFO size anyway, and
the code below takes care of enforcing these limits.
Fixes: a380ed461f66d1b8 ("serial: sh-sci: implement FIFO threshold register setting")
Reported-by: Linh Phung <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Ulrich Hecht <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/5eff320aef92ffb33d00e57979fd3603bbb4a70f.1620648218.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/sh-sci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1023,10 +1023,10 @@ static int scif_set_rtrg(struct uart_por
{
unsigned int bits;
+ if (rx_trig >= port->fifosize)
+ rx_trig = port->fifosize - 1;
if (rx_trig < 1)
rx_trig = 1;
- if (rx_trig >= port->fifosize)
- rx_trig = port->fifosize;
/* HSCIF can be set to an arbitrary level. */
if (sci_getreg(port, HSRTRGR)->size) {
From: Ariel Levkovich <[email protected]>
commit 6ff51ab8aa8fcbcddeeefce8ca705b575805d12b upstream.
Termination tables are restricted to have the default miss action and
cannot be set to forward to another table in case of a miss.
If the fs prio of the termination table is not the last one in the
list, fs_core will attempt to attach it to another table.
Set the unmanaged ft flag when creating the termination table ft
and select the tc offload prio for it to prevent fs_core from selecting
the forwarding to next ft miss action and use the default one.
In addition, set the flow that forwards to the termination table to
ignore ft level restrictions since the ft level is not set by fs_core
for unamanged fts.
Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Ariel Levkovich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
@@ -76,10 +76,11 @@ mlx5_eswitch_termtbl_create(struct mlx5_
/* As this is the terminating action then the termination table is the
* same prio as the slow path
*/
- ft_attr.flags = MLX5_FLOW_TABLE_TERMINATION |
+ ft_attr.flags = MLX5_FLOW_TABLE_TERMINATION | MLX5_FLOW_TABLE_UNMANAGED |
MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT;
- ft_attr.prio = FDB_SLOW_PATH;
+ ft_attr.prio = FDB_TC_OFFLOAD;
ft_attr.max_fte = 1;
+ ft_attr.level = 1;
ft_attr.autogroup.max_num_groups = 1;
tt->termtbl = mlx5_create_auto_grouped_flow_table(root_ns, &ft_attr);
if (IS_ERR(tt->termtbl)) {
@@ -216,6 +217,7 @@ mlx5_eswitch_termtbl_required(struct mlx
int i;
if (!MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, termination_table) ||
+ !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ignore_flow_level) ||
attr->flags & MLX5_ESW_ATTR_FLAG_SLOW_PATH ||
!mlx5_eswitch_offload_is_uplink_port(esw, spec))
return false;
@@ -288,6 +290,7 @@ mlx5_eswitch_add_termtbl_rule(struct mlx
/* create the FTE */
flow_act->action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
flow_act->pkt_reformat = NULL;
+ flow_act->flags |= FLOW_ACT_IGNORE_FLOW_LEVEL;
rule = mlx5_add_flow_rules(fdb, spec, flow_act, dest, num_dest);
if (IS_ERR(rule))
goto revert_changes;
From: Colin Ian King <[email protected]>
commit 3ddb4ce1e6e3bd112778ab93bbd9092f23a878ec upstream.
Currently the expression lsr | UART_LSR_TEMT is always true and
this seems suspect. I believe the intent was to mask lsr with UART_LSR_TEMT
to check that bit, so the expression should be using the & operator
instead. Fix this.
Fixes: b9c2470fb150 ("serial: tegra: flush the RX fifo on frame error")
Signed-off-by: Colin Ian King <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -333,7 +333,7 @@ static void tegra_uart_fifo_reset(struct
do {
lsr = tegra_uart_read(tup, UART_LSR);
- if ((lsr | UART_LSR_TEMT) && !(lsr & UART_LSR_DR))
+ if ((lsr & UART_LSR_TEMT) && !(lsr & UART_LSR_DR))
break;
udelay(1);
} while (--tmout);
From: NeilBrown <[email protected]>
commit e877a88d1f069edced4160792f42c2a8e2dba942 upstream.
If sunrpc.tcp_max_slot_table_entries is small and there are tasks
on the backlog queue, then when a request completes it is freed and the
first task on the queue is woken. The expectation is that it will wake
and claim that request. However if it was a sync task and the waiting
process was killed at just that moment, it will wake and NOT claim the
request.
As long as TASK_CONGESTED remains set, requests can only be claimed by
tasks woken from the backlog, and they are woken only as requests are
freed, so when a task doesn't claim a request, no other task can ever
get that request until TASK_CONGESTED is cleared. Each time this
happens the number of available requests is decreased by one.
With a sufficiently high workload and sufficiently low setting of
max_slot (16 in the case where this was seen), TASK_CONGESTED can remain
set for an extended period, and the above scenario (of a process being
killed just as its task was woken) can repeat until no requests can be
allocated. Then traffic stops.
This patch addresses the problem by introducing a positive handover of a
request from a completing task to a backlog task - the request is never
freed when there is a backlog.
When a task is woken it might not already have a request attached in
which case it is *not* freed (as with current code) but is initialised
(if needed) and used. If it isn't used it will eventually be freed by
rpc_exit_task(). xprt_release() is enhanced to be able to correctly
release an uninitialised request.
Fixes: ba60eb25ff6b ("SUNRPC: Fix a livelock problem in the xprt->backlog queue")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/clnt.c | 7 -----
net/sunrpc/xprt.c | 68 +++++++++++++++++++++++++++++++++++++-----------------
2 files changed, 47 insertions(+), 28 deletions(-)
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1680,13 +1680,6 @@ call_reserveresult(struct rpc_task *task
return;
}
- /*
- * Even though there was an error, we may have acquired
- * a request slot somehow. Make sure not to leak it.
- */
- if (task->tk_rqstp)
- xprt_release(task);
-
switch (status) {
case -ENOMEM:
rpc_delay(task, HZ >> 2);
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -70,6 +70,7 @@
static void xprt_init(struct rpc_xprt *xprt, struct net *net);
static __be32 xprt_alloc_xid(struct rpc_xprt *xprt);
static void xprt_destroy(struct rpc_xprt *xprt);
+static void xprt_request_init(struct rpc_task *task);
static DEFINE_SPINLOCK(xprt_list_lock);
static LIST_HEAD(xprt_list);
@@ -1580,10 +1581,26 @@ static void xprt_add_backlog(struct rpc_
rpc_sleep_on(&xprt->backlog, task, NULL);
}
-static void xprt_wake_up_backlog(struct rpc_xprt *xprt)
+static bool __xprt_set_rq(struct rpc_task *task, void *data)
{
- if (rpc_wake_up_next(&xprt->backlog) == NULL)
+ struct rpc_rqst *req = data;
+
+ if (task->tk_rqstp == NULL) {
+ memset(req, 0, sizeof(*req)); /* mark unused */
+ task->tk_status = -EAGAIN;
+ task->tk_rqstp = req;
+ return true;
+ }
+ return false;
+}
+
+static bool xprt_wake_up_backlog(struct rpc_xprt *xprt, struct rpc_rqst *req)
+{
+ if (rpc_wake_up_first(&xprt->backlog, __xprt_set_rq, req) == NULL) {
clear_bit(XPRT_CONGESTED, &xprt->state);
+ return false;
+ }
+ return true;
}
static bool xprt_throttle_congested(struct rpc_xprt *xprt, struct rpc_task *task)
@@ -1671,11 +1688,11 @@ EXPORT_SYMBOL_GPL(xprt_alloc_slot);
void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
{
spin_lock(&xprt->reserve_lock);
- if (!xprt_dynamic_free_slot(xprt, req)) {
+ if (!xprt_wake_up_backlog(xprt, req) &&
+ !xprt_dynamic_free_slot(xprt, req)) {
memset(req, 0, sizeof(*req)); /* mark unused */
list_add(&req->rq_list, &xprt->free);
}
- xprt_wake_up_backlog(xprt);
spin_unlock(&xprt->reserve_lock);
}
EXPORT_SYMBOL_GPL(xprt_free_slot);
@@ -1763,6 +1780,10 @@ xprt_request_init(struct rpc_task *task)
struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req = task->tk_rqstp;
+ if (req->rq_task)
+ /* Already initialized */
+ return;
+
req->rq_task = task;
req->rq_xprt = xprt;
req->rq_buffer = NULL;
@@ -1823,8 +1844,10 @@ void xprt_retry_reserve(struct rpc_task
struct rpc_xprt *xprt = task->tk_xprt;
task->tk_status = 0;
- if (task->tk_rqstp != NULL)
+ if (task->tk_rqstp != NULL) {
+ xprt_request_init(task);
return;
+ }
task->tk_status = -EAGAIN;
xprt_do_reserve(xprt, task);
@@ -1849,23 +1872,26 @@ void xprt_release(struct rpc_task *task)
}
xprt = req->rq_xprt;
- xprt_request_dequeue_xprt(task);
- spin_lock(&xprt->transport_lock);
- xprt->ops->release_xprt(xprt, task);
- if (xprt->ops->release_request)
- xprt->ops->release_request(task);
- xprt_schedule_autodisconnect(xprt);
- spin_unlock(&xprt->transport_lock);
- if (req->rq_buffer)
- xprt->ops->buf_free(task);
- xdr_free_bvec(&req->rq_rcv_buf);
- xdr_free_bvec(&req->rq_snd_buf);
- if (req->rq_cred != NULL)
- put_rpccred(req->rq_cred);
- task->tk_rqstp = NULL;
- if (req->rq_release_snd_buf)
- req->rq_release_snd_buf(req);
+ if (xprt) {
+ xprt_request_dequeue_xprt(task);
+ spin_lock(&xprt->transport_lock);
+ xprt->ops->release_xprt(xprt, task);
+ if (xprt->ops->release_request)
+ xprt->ops->release_request(task);
+ xprt_schedule_autodisconnect(xprt);
+ spin_unlock(&xprt->transport_lock);
+ if (req->rq_buffer)
+ xprt->ops->buf_free(task);
+ xdr_free_bvec(&req->rq_rcv_buf);
+ xdr_free_bvec(&req->rq_snd_buf);
+ if (req->rq_cred != NULL)
+ put_rpccred(req->rq_cred);
+ if (req->rq_release_snd_buf)
+ req->rq_release_snd_buf(req);
+ } else
+ xprt = task->tk_xprt;
+ task->tk_rqstp = NULL;
if (likely(!bc_prealloc(req)))
xprt->ops->free_slot(xprt, req);
else
From: Vladyslav Tarasiuk <[email protected]>
commit db825feefc6868896fed5e361787ba3bee2fd906 upstream.
Fix SFP and QSFP* EEPROM queries by setting i2c_address, offset and page
number correctly. For SFP set the following params:
- I2C address for offsets 0-255 is 0x50. For 256-511 - 0x51.
- Page number is zero.
- Offset is 0-255.
At the same time, QSFP* parameters are different:
- I2C address is always 0x50.
- Page number is not limited to zero.
- Offset is 0-255 for page zero and 128-255 for others.
To set parameters accordingly to cable used, implement function to query
module ID and implement respective helper functions to set parameters
correctly.
Fixes: 135dd9594f12 ("net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query")
Signed-off-by: Vladyslav Tarasiuk <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4
drivers/net/ethernet/mellanox/mlx4/port.c | 107 +++++++++++++++++++++++-
2 files changed, 104 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -2027,8 +2027,6 @@ static int mlx4_en_set_tunable(struct ne
return ret;
}
-#define MLX4_EEPROM_PAGE_LEN 256
-
static int mlx4_en_get_module_info(struct net_device *dev,
struct ethtool_modinfo *modinfo)
{
@@ -2063,7 +2061,7 @@ static int mlx4_en_get_module_info(struc
break;
case MLX4_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
- modinfo->eeprom_len = MLX4_EEPROM_PAGE_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
break;
default:
return -EINVAL;
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -1973,6 +1973,7 @@ EXPORT_SYMBOL(mlx4_get_roce_gid_from_sla
#define I2C_ADDR_LOW 0x50
#define I2C_ADDR_HIGH 0x51
#define I2C_PAGE_SIZE 256
+#define I2C_HIGH_PAGE_SIZE 128
/* Module Info Data */
struct mlx4_cable_info {
@@ -2026,6 +2027,88 @@ static inline const char *cable_info_mad
return "Unknown Error";
}
+static int mlx4_get_module_id(struct mlx4_dev *dev, u8 port, u8 *module_id)
+{
+ struct mlx4_cmd_mailbox *inbox, *outbox;
+ struct mlx4_mad_ifc *inmad, *outmad;
+ struct mlx4_cable_info *cable_info;
+ int ret;
+
+ inbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inbox))
+ return PTR_ERR(inbox);
+
+ outbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outbox)) {
+ mlx4_free_cmd_mailbox(dev, inbox);
+ return PTR_ERR(outbox);
+ }
+
+ inmad = (struct mlx4_mad_ifc *)(inbox->buf);
+ outmad = (struct mlx4_mad_ifc *)(outbox->buf);
+
+ inmad->method = 0x1; /* Get */
+ inmad->class_version = 0x1;
+ inmad->mgmt_class = 0x1;
+ inmad->base_version = 0x1;
+ inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */
+
+ cable_info = (struct mlx4_cable_info *)inmad->data;
+ cable_info->dev_mem_address = 0;
+ cable_info->page_num = 0;
+ cable_info->i2c_addr = I2C_ADDR_LOW;
+ cable_info->size = cpu_to_be16(1);
+
+ ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C,
+ MLX4_CMD_NATIVE);
+ if (ret)
+ goto out;
+
+ if (be16_to_cpu(outmad->status)) {
+ /* Mad returned with bad status */
+ ret = be16_to_cpu(outmad->status);
+ mlx4_warn(dev,
+ "MLX4_CMD_MAD_IFC Get Module ID attr(%x) port(%d) i2c_addr(%x) offset(%d) size(%d): Response Mad Status(%x) - %s\n",
+ 0xFF60, port, I2C_ADDR_LOW, 0, 1, ret,
+ cable_info_mad_err_str(ret));
+ ret = -ret;
+ goto out;
+ }
+ cable_info = (struct mlx4_cable_info *)outmad->data;
+ *module_id = cable_info->data[0];
+out:
+ mlx4_free_cmd_mailbox(dev, inbox);
+ mlx4_free_cmd_mailbox(dev, outbox);
+ return ret;
+}
+
+static void mlx4_sfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset)
+{
+ *i2c_addr = I2C_ADDR_LOW;
+ *page_num = 0;
+
+ if (*offset < I2C_PAGE_SIZE)
+ return;
+
+ *i2c_addr = I2C_ADDR_HIGH;
+ *offset -= I2C_PAGE_SIZE;
+}
+
+static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset)
+{
+ /* Offsets 0-255 belong to page 0.
+ * Offsets 256-639 belong to pages 01, 02, 03.
+ * For example, offset 400 is page 02: 1 + (400 - 256) / 128 = 2
+ */
+ if (*offset < I2C_PAGE_SIZE)
+ *page_num = 0;
+ else
+ *page_num = 1 + (*offset - I2C_PAGE_SIZE) / I2C_HIGH_PAGE_SIZE;
+ *i2c_addr = I2C_ADDR_LOW;
+ *offset -= *page_num * I2C_HIGH_PAGE_SIZE;
+}
+
/**
* mlx4_get_module_info - Read cable module eeprom data
* @dev: mlx4_dev.
@@ -2045,12 +2128,30 @@ int mlx4_get_module_info(struct mlx4_dev
struct mlx4_cmd_mailbox *inbox, *outbox;
struct mlx4_mad_ifc *inmad, *outmad;
struct mlx4_cable_info *cable_info;
- u16 i2c_addr;
+ u8 module_id, i2c_addr, page_num;
int ret;
if (size > MODULE_INFO_MAX_READ)
size = MODULE_INFO_MAX_READ;
+ ret = mlx4_get_module_id(dev, port, &module_id);
+ if (ret)
+ return ret;
+
+ switch (module_id) {
+ case MLX4_MODULE_ID_SFP:
+ mlx4_sfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
+ break;
+ case MLX4_MODULE_ID_QSFP:
+ case MLX4_MODULE_ID_QSFP_PLUS:
+ case MLX4_MODULE_ID_QSFP28:
+ mlx4_qsfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
+ break;
+ default:
+ mlx4_err(dev, "Module ID not recognized: %#x\n", module_id);
+ return -EINVAL;
+ }
+
inbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(inbox))
return PTR_ERR(inbox);
@@ -2076,11 +2177,9 @@ int mlx4_get_module_info(struct mlx4_dev
*/
size -= offset + size - I2C_PAGE_SIZE;
- i2c_addr = I2C_ADDR_LOW;
-
cable_info = (struct mlx4_cable_info *)inmad->data;
cable_info->dev_mem_address = cpu_to_be16(offset);
- cable_info->page_num = 0;
+ cable_info->page_num = page_num;
cable_info->i2c_addr = i2c_addr;
cable_info->size = cpu_to_be16(size);
From: Hoang Le <[email protected]>
commit 75016891357a628d2b8acc09e2b9b2576c18d318 upstream.
This reverts commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046.
Above fix is not correct and caused memory leak issue.
Fixes: 6bf24dc0cc0c ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy <[email protected]>
Acked-by: Tung Nguyen <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/socket.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1244,7 +1244,10 @@ void tipc_sk_mcast_rcv(struct net *net,
spin_lock_bh(&inputq->lock);
if (skb_peek(arrvq) == skb) {
skb_queue_splice_tail_init(&tmpq, inputq);
- __skb_dequeue(arrvq);
+ /* Decrease the skb's refcnt as increasing in the
+ * function tipc_skb_peek
+ */
+ kfree_skb(__skb_dequeue(arrvq));
}
spin_unlock_bh(&inputq->lock);
__skb_queue_purge(&tmpq);
From: Xin Long <[email protected]>
commit b7df21cf1b79ab7026f545e7bf837bd5750ac026 upstream.
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[] <IRQ>
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
Fixes: 45c8b7b175ce ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/msg.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -151,18 +151,13 @@ int tipc_buf_append(struct sk_buff **hea
if (unlikely(head))
goto err;
*buf = NULL;
+ if (skb_has_frag_list(frag) && __skb_linearize(frag))
+ goto err;
frag = skb_unshare(frag, GFP_ATOMIC);
if (unlikely(!frag))
goto err;
head = *headbuf = frag;
TIPC_SKB_CB(head)->tail = NULL;
- if (skb_is_nonlinear(head)) {
- skb_walk_frags(head, tail) {
- TIPC_SKB_CB(head)->tail = tail;
- }
- } else {
- skb_frag_list_init(head);
- }
return 0;
}
From: Xin Long <[email protected]>
commit 04c26faa51d1e2fe71cf13c45791f5174c37f986 upstream.
On some host, a crash could be triggered simply by repeating these
commands several times:
# modprobe tipc
# tipc bearer enable media udp name UDP1 localip 127.0.0.1
# rmmod tipc
[] BUG: unable to handle kernel paging request at ffffffffc096bb00
[] Workqueue: events 0xffffffffc096bb00
[] Call Trace:
[] ? process_one_work+0x1a7/0x360
[] ? worker_thread+0x30/0x390
[] ? create_worker+0x1a0/0x1a0
[] ? kthread+0x116/0x130
[] ? kthread_flush_work_fn+0x10/0x10
[] ? ret_from_fork+0x35/0x40
When removing the TIPC module, the UDP tunnel sock will be delayed to
release in a work queue as sock_release() can't be done in rtnl_lock().
If the work queue is schedule to run after the TIPC module is removed,
kernel will crash as the work queue function cleanup_beareri() code no
longer exists when trying to invoke it.
To fix it, this patch introduce a member wq_count in tipc_net to track
the numbers of work queues in schedule, and wait and exit until all
work queues are done in tipc_exit_net().
Fixes: d0f91938bede ("tipc: add ip/udp media type")
Reported-by: Shuang Li <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/core.c | 2 ++
net/tipc/core.h | 2 ++
net/tipc/udp_media.c | 2 ++
3 files changed, 6 insertions(+)
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -121,6 +121,8 @@ static void __net_exit tipc_exit_net(str
#ifdef CONFIG_TIPC_CRYPTO
tipc_crypto_stop(&tipc_net(net)->crypto_tx);
#endif
+ while (atomic_read(&tn->wq_count))
+ cond_resched();
}
static void __net_exit tipc_pernet_pre_exit(struct net *net)
--- a/net/tipc/core.h
+++ b/net/tipc/core.h
@@ -151,6 +151,8 @@ struct tipc_net {
#endif
/* Work item for net finalize */
struct tipc_net_work final_work;
+ /* The numbers of work queues in schedule */
+ atomic_t wq_count;
};
static inline struct tipc_net *tipc_net(struct net *net)
--- a/net/tipc/udp_media.c
+++ b/net/tipc/udp_media.c
@@ -806,6 +806,7 @@ static void cleanup_bearer(struct work_s
kfree_rcu(rcast, rcu);
}
+ atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count);
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->ubsock);
synchronize_net();
@@ -826,6 +827,7 @@ static void tipc_udp_disable(struct tipc
RCU_INIT_POINTER(ub->bearer, NULL);
/* sock_release need to be done outside of rtnl lock */
+ atomic_inc(&tipc_net(sock_net(ub->ubsock->sk))->wq_count);
INIT_WORK(&ub->work, cleanup_bearer);
schedule_work(&ub->work);
}
From: DENG Qingfang <[email protected]>
commit 474a2ddaa192777522a7499784f1d60691cd831a upstream.
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mt7530.c | 8 --------
1 file changed, 8 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1128,14 +1128,6 @@ mt7530_port_set_vlan_aware(struct dsa_sw
{
struct mt7530_priv *priv = ds->priv;
- /* The real fabric path would be decided on the membership in the
- * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS
- * means potential VLAN can be consisting of certain subset of all
- * ports.
- */
- mt7530_rmw(priv, MT7530_PCR_P(port),
- PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
-
/* Trapped into security mode allows packet forwarding through VLAN
* table lookup. CPU port is set to fallback mode to let untagged
* frames pass through.
From: Zheyu Ma <[email protected]>
commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.
This report reveals it:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:727 [inline]
register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
__lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
CR2: 0000000000000010
---[ end trace 11804dbb55cb1a64 ]---
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/rp2.c | 52 +++++++++++++++--------------------------------
1 file changed, 17 insertions(+), 35 deletions(-)
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -195,7 +195,6 @@ struct rp2_card {
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};
#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -664,17 +663,10 @@ static void rp2_remove_ports(struct rp2_
card->initialized_ports = 0;
}
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;
phys_base = pci_resource_start(card->pdev, 1);
@@ -720,23 +712,13 @@ static void rp2_fw_cb(const struct firmw
card->initialized_ports++;
}
- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}
static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -747,7 +729,6 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);
rc = pcim_enable_device(pdev);
if (rc)
@@ -780,21 +761,23 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
card->ports = ports;
- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
- IRQF_SHARED, DRV_NAME, card);
- if (rc)
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
return rc;
+ }
- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
return 0;
}
@@ -803,7 +786,6 @@ static void rp2_remove(struct pci_dev *p
{
struct rp2_card *card = pci_get_drvdata(pdev);
- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}
From: Daniele Palmas <[email protected]>
commit e467714f822b5d167a7fb03d34af91b5b6af1827 upstream.
Add support for the following Telit LE910-S1 compositions:
0x7010: rndis, tty, tty, tty
0x7011: ecm, tty, tty, tty
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1240,6 +1240,10 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff), /* Telit LE910-S1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
+ .driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
From: Zolton Jheng <[email protected]>
commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.
This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
device.
Signed-off-by: Zolton Jheng <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -113,6 +113,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -158,6 +158,7 @@
/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
+#define ADLINK_ND6530GC_PRODUCT_ID 0x653a
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
From: Christophe JAILLET <[email protected]>
commit 680ec0549a055eb464dce6ffb4bfb736ef87236e upstream.
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the
error handling path of the probe function, as already done in the remove
function
Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/d51caaac747277a1099ba8dea07acd85435b857e.1620587472.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-fsl-dspi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1375,11 +1375,13 @@ poll_mode:
ret = spi_register_controller(ctlr);
if (ret != 0) {
dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
- goto out_free_irq;
+ goto out_release_dma;
}
return ret;
+out_release_dma:
+ dspi_release_dma(dspi);
out_free_irq:
if (dspi->irq)
free_irq(dspi->irq, dspi);
From: Sean MacLennan <[email protected]>
commit 89b1a3d811e6f8065d6ae8a25e7682329b4a31e2 upstream.
This adds support for the Startech.com generic serial to USB converter.
It seems to be a bone stock TI_3410. I have been using this patch for
years.
Signed-off-by: Sean MacLennan <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ti_usb_3410_5052.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -37,6 +37,7 @@
/* Vendor and product ids */
#define TI_VENDOR_ID 0x0451
#define IBM_VENDOR_ID 0x04b3
+#define STARTECH_VENDOR_ID 0x14b0
#define TI_3410_PRODUCT_ID 0x3410
#define IBM_4543_PRODUCT_ID 0x4543
#define IBM_454B_PRODUCT_ID 0x454b
@@ -372,6 +373,7 @@ static const struct usb_device_id ti_id_
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ } /* terminator */
};
@@ -410,6 +412,7 @@ static const struct usb_device_id ti_id_
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ } /* terminator */
};
From: David Howells <[email protected]>
commit f610a5a29c3cfb7d37bdfa4ef52f72ea51f24a76 upstream.
Fix rename of one directory over another such that the nlink on the deleted
directory is cleared to 0 rather than being decremented to 1.
This was causing the generic/035 xfstest to fail.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/162194384460.3999479.7605572278074191079.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/dir.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1837,7 +1837,9 @@ static void afs_rename_edit_dir(struct a
new_inode = d_inode(new_dentry);
if (new_inode) {
spin_lock(&new_inode->i_lock);
- if (new_inode->i_nlink > 0)
+ if (S_ISDIR(new_inode->i_mode))
+ clear_nlink(new_inode);
+ else if (new_inode->i_nlink > 0)
drop_nlink(new_inode);
spin_unlock(&new_inode->i_lock);
}
From: Dan Carpenter <[email protected]>
commit a269333fa5c0c8e53c92b5a28a6076a28cde3e83 upstream.
If ds->ops->get_sset_count() fails then it "count" is a negative error
code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative
error code is type promoted to a very high value and the loop will
corrupt memory until the system crashes.
Fix this by checking for error codes and changing the type of "i" to
just int.
Fixes: badf3ada60ab ("net: dsa: Provide CPU port statistics to master netdev")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dsa/master.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/dsa/master.c
+++ b/net/dsa/master.c
@@ -147,8 +147,7 @@ static void dsa_master_get_strings(struc
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int len = ETH_GSTRING_LEN;
- int mcount = 0, count;
- unsigned int i;
+ int mcount = 0, count, i;
uint8_t pfx[4];
uint8_t *ndata;
@@ -178,6 +177,8 @@ static void dsa_master_get_strings(struc
*/
ds->ops->get_strings(ds, port, stringset, ndata);
count = ds->ops->get_sset_count(ds, port, stringset);
+ if (count < 0)
+ return;
for (i = 0; i < count; i++) {
memmove(ndata + (i * len + sizeof(pfx)),
ndata + i * len, len - sizeof(pfx));
From: Roi Dayan <[email protected]>
commit c07531c01d8284aedaf95708ea90e76d11af0e21 upstream.
Offloading conns could fail for multiple reasons and a hw refresh bit is
set to try to reoffload it in next sw packet.
But it could be in some cases and future points that the hw refresh bit
is not set but a refresh could succeed.
Remove the hw refresh bit and do offload refresh if requested.
There won't be a new work entry if a work is already pending
anyway as there is the hw pending bit.
Fixes: 8b3646d6e0c4 ("net/sched: act_ct: Support refreshing the flow table entries")
Signed-off-by: Roi Dayan <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/netfilter/nf_flow_table.h | 1 -
net/netfilter/nf_flow_table_core.c | 3 +--
net/netfilter/nf_flow_table_offload.c | 7 ++++---
3 files changed, 5 insertions(+), 6 deletions(-)
--- a/include/net/netfilter/nf_flow_table.h
+++ b/include/net/netfilter/nf_flow_table.h
@@ -126,7 +126,6 @@ enum nf_flow_flags {
NF_FLOW_HW,
NF_FLOW_HW_DYING,
NF_FLOW_HW_DEAD,
- NF_FLOW_HW_REFRESH,
NF_FLOW_HW_PENDING,
};
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -259,8 +259,7 @@ void flow_offload_refresh(struct nf_flow
{
flow->timeout = nf_flowtable_time_stamp + NF_FLOW_TIMEOUT;
- if (likely(!nf_flowtable_hw_offload(flow_table) ||
- !test_and_clear_bit(NF_FLOW_HW_REFRESH, &flow->flags)))
+ if (likely(!nf_flowtable_hw_offload(flow_table)))
return;
nf_flow_offload_add(flow_table, flow);
--- a/net/netfilter/nf_flow_table_offload.c
+++ b/net/netfilter/nf_flow_table_offload.c
@@ -753,10 +753,11 @@ static void flow_offload_work_add(struct
err = flow_offload_rule_add(offload, flow_rule);
if (err < 0)
- set_bit(NF_FLOW_HW_REFRESH, &offload->flow->flags);
- else
- set_bit(IPS_HW_OFFLOAD_BIT, &offload->flow->ct->status);
+ goto out;
+ set_bit(IPS_HW_OFFLOAD_BIT, &offload->flow->ct->status);
+
+out:
nf_flow_offload_destroy(flow_rule);
}
From: Felix Fietkau <[email protected]>
commit 75ea44e356b5de8c817f821c9dd68ae329e82add upstream.
On some hosts, rlim.rlim_max can be returned as RLIM_INFINITY.
By casting it to int, it is interpreted as -1, which will cause get_maxfds
to return 0, causing "Invalid argument" errors in nftw() calls.
Fix this by casting the second argument of min() to rlim_t instead.
Fixes: 80eeb67fe577 ("perf jevents: Program to convert JSON file")
Signed-off-by: Felix Fietkau <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/pmu-events/jevents.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/pmu-events/jevents.c
+++ b/tools/perf/pmu-events/jevents.c
@@ -894,7 +894,7 @@ static int get_maxfds(void)
struct rlimit rlim;
if (getrlimit(RLIMIT_NOFILE, &rlim) == 0)
- return min((int)rlim.rlim_max / 2, 512);
+ return min(rlim.rlim_max / 2, (rlim_t)512);
return 512;
}
From: Vladimir Oltean <[email protected]>
commit ed040abca4c1db72dfd3b8483b6ed6bfb7c2571e upstream.
One thing became visible when writing the blamed commit, and that was
that STP and PTP frames injected by net/dsa/tag_sja1105.c using the
deferred xmit mechanism are always classified to the pvid of the CPU
port, regardless of whatever VLAN there might be in these packets.
So a decision needed to be taken regarding the mechanism through which
we should ensure that delivery of STP and PTP traffic is possible when
we are in a VLAN awareness mode that involves tag_8021q. This is because
tag_8021q is not concerned with managing the pvid of the CPU port, since
as far as tag_8021q is concerned, no traffic should be sent as untagged
from the CPU port. So we end up not actually having a pvid on the CPU
port if we only listen to tag_8021q, and unless we do something about it.
The decision taken at the time was to keep VLAN 1 in the list of
priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures
that STP and PTP frames can always be sent to the outside world.
However there is a problem. If we do the following while we are in
the best_effort_vlan_filtering=true mode:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
Then untagged and pvid-tagged frames should be dropped. But we observe
that they aren't, and this is because of the precaution we took that VID
1 is always installed on all ports.
So clearly VLAN 1 is not good for this purpose. What about VLAN 0?
Well, VLAN 0 is managed by the 8021q module, and that module wants to
ensure that 802.1p tagged frames are always received by a port, and are
always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our
STP and PTP frames to be untagged if the stack sent them as untagged -
we don't want the driver to just decide out of the blue that it adds
VID 0 to some packets.
So what to do?
Well, there is one other VLAN that is reserved, and that is 4095:
$ ip link add link swp2 name swp2.4095 type vlan id 4095
Error: 8021q: Invalid VLAN id.
$ bridge vlan add dev swp2 vid 4095
Error: bridge: Vlan id is invalid.
After we made this change, VLAN 1 is indeed forwarded and/or dropped
according to the bridge VLAN table, there are no further alterations
done by the sja1105 driver.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -25,6 +25,8 @@
#include "sja1105_sgmii.h"
#include "sja1105_tas.h"
+#define SJA1105_DEFAULT_VLAN (VLAN_N_VID - 1)
+
static const struct dsa_switch_ops sja1105_switch_ops;
static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len,
@@ -292,6 +294,13 @@ static int sja1105_init_l2_lookup_params
return 0;
}
+/* Set up a default VLAN for untagged traffic injected from the CPU
+ * using management routes (e.g. STP, PTP) as opposed to tag_8021q.
+ * All DT-defined ports are members of this VLAN, and there are no
+ * restrictions on forwarding (since the CPU selects the destination).
+ * Frames from this VLAN will always be transmitted as untagged, and
+ * neither the bridge nor the 8021q module cannot create this VLAN ID.
+ */
static int sja1105_init_static_vlan(struct sja1105_private *priv)
{
struct sja1105_table *table;
@@ -301,17 +310,13 @@ static int sja1105_init_static_vlan(stru
.vmemb_port = 0,
.vlan_bc = 0,
.tag_port = 0,
- .vlanid = 1,
+ .vlanid = SJA1105_DEFAULT_VLAN,
};
struct dsa_switch *ds = priv->ds;
int port;
table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP];
- /* The static VLAN table will only contain the initial pvid of 1.
- * All other VLANs are to be configured through dynamic entries,
- * and kept in the static configuration table as backing memory.
- */
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
@@ -324,9 +329,6 @@ static int sja1105_init_static_vlan(stru
table->entry_count = 1;
- /* VLAN 1: all DT-defined ports are members; no restrictions on
- * forwarding; always transmit as untagged.
- */
for (port = 0; port < ds->num_ports; port++) {
struct sja1105_bridge_vlan *v;
@@ -337,15 +339,12 @@ static int sja1105_init_static_vlan(stru
pvid.vlan_bc |= BIT(port);
pvid.tag_port &= ~BIT(port);
- /* Let traffic that don't need dsa_8021q (e.g. STP, PTP) be
- * transmitted as untagged.
- */
v = kzalloc(sizeof(*v), GFP_KERNEL);
if (!v)
return -ENOMEM;
v->port = port;
- v->vid = 1;
+ v->vid = SJA1105_DEFAULT_VLAN;
v->untagged = true;
if (dsa_is_cpu_port(ds, port))
v->pvid = true;
From: Srinivas Pandruvada <[email protected]>
commit eb8500b874cf295971a6a2a04e14eb0854197a3c upstream.
After commit 81ad4276b505 ("Thermal: Ignore invalid trip points") all
user_space governor notifications via RW trip point is broken in intel
thermal drivers. This commits marks trip_points with value of 0 during
call to thermal_zone_device_register() as invalid. RW trip points can be
0 as user space will set the correct trip temperature later.
During driver init, x86_package_temp and all int340x drivers sets RW trip
temperature as 0. This results in all these trips marked as invalid by
the thermal core.
To fix this initialize RW trips to THERMAL_TEMP_INVALID instead of 0.
Cc: <[email protected]>
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c | 4 ++++
drivers/thermal/intel/x86_pkg_temp_thermal.c | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -231,6 +231,8 @@ struct int34x_thermal_zone *int340x_ther
if (ACPI_FAILURE(status))
trip_cnt = 0;
else {
+ int i;
+
int34x_thermal_zone->aux_trips =
kcalloc(trip_cnt,
sizeof(*int34x_thermal_zone->aux_trips),
@@ -241,6 +243,8 @@ struct int34x_thermal_zone *int340x_ther
}
trip_mask = BIT(trip_cnt) - 1;
int34x_thermal_zone->aux_trip_nr = trip_cnt;
+ for (i = 0; i < trip_cnt; ++i)
+ int34x_thermal_zone->aux_trips[i] = THERMAL_TEMP_INVALID;
}
trip_cnt = int340x_thermal_read_trips(int34x_thermal_zone);
--- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -164,7 +164,7 @@ static int sys_get_trip_temp(struct ther
if (thres_reg_value)
*temp = zonedev->tj_max - thres_reg_value * 1000;
else
- *temp = 0;
+ *temp = THERMAL_TEMP_INVALID;
pr_debug("sys_get_trip_temp %d\n", *temp);
return 0;
From: Paolo Abeni <[email protected]>
commit 3ed0a585bfadb6bd7080f11184adbc9edcce7dbc upstream.
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mptcp/subflow.c | 1 -
1 file changed, 1 deletion(-)
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -740,7 +740,6 @@ static enum mapping_status get_mapping_s
data_len = mpext->data_len;
if (data_len == 0) {
- pr_err("Infinite mapping not handled");
MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_INFINITEMAPRX);
return MAPPING_INVALID;
}
From: Dominik Andreas Schorpp <[email protected]>
commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.
Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232)
and CM31A (LoRaWAN Modem).
Signed-off-by: Dominik Andreas Schorpp <[email protected]>
Signed-off-by: Juergen Borleis <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 3 +++
drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++
2 files changed, 10 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1034,6 +1034,9 @@ static const struct usb_device_id id_tab
/* Sienna devices */
{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
+ /* IDS GmbH devices */
+ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
+ { USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1568,6 +1568,13 @@
#define UNJO_ISODEBUG_V1_PID 0x150D
/*
+ * IDS GmbH
+ */
+#define IDS_VID 0x2CAF
+#define IDS_SI31A_PID 0x13A2
+#define IDS_CM31A_PID 0x13A3
+
+/*
* U-Blox products (http://www.u-blox.com).
*/
#define UBLOX_VID 0x1546
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ]
hp_accel can take almost two seconds to resume on some HP laptops.
The bottleneck is on evaluating _INI, which is only needed to run once.
Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.
Signed-off-by: Kai-Heng Feng <[email protected]>
Acked-by: Éric Piel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/lis3lv02d/lis3lv02d.h | 1 +
drivers/platform/x86/hp_accel.c | 22 +++++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
index c394c0b08519..7ac788fae1b8 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.h
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -271,6 +271,7 @@ struct lis3lv02d {
int regs_size;
u8 *reg_cache;
bool regs_stored;
+ bool init_required;
u8 odr_mask; /* ODR bit mask */
u8 whoami; /* indicates measurement precision */
s16 (*read_data) (struct lis3lv02d *lis3, int reg);
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 799cbe2ffcf3..8c0867bda828 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -88,6 +88,9 @@ MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
static int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
{
struct acpi_device *dev = lis3->bus_priv;
+ if (!lis3->init_required)
+ return 0;
+
if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI,
NULL, NULL) != AE_OK)
return -EINVAL;
@@ -356,6 +359,7 @@ static int lis3lv02d_add(struct acpi_device *device)
}
/* call the core layer do its init */
+ lis3_dev.init_required = true;
ret = lis3lv02d_init_device(&lis3_dev);
if (ret)
return ret;
@@ -403,11 +407,27 @@ static int lis3lv02d_suspend(struct device *dev)
static int lis3lv02d_resume(struct device *dev)
{
+ lis3_dev.init_required = false;
+ lis3lv02d_poweron(&lis3_dev);
+ return 0;
+}
+
+static int lis3lv02d_restore(struct device *dev)
+{
+ lis3_dev.init_required = true;
lis3lv02d_poweron(&lis3_dev);
return 0;
}
-static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume);
+static const struct dev_pm_ops hp_accel_pm = {
+ .suspend = lis3lv02d_suspend,
+ .resume = lis3lv02d_resume,
+ .freeze = lis3lv02d_suspend,
+ .thaw = lis3lv02d_resume,
+ .poweroff = lis3lv02d_suspend,
+ .restore = lis3lv02d_restore,
+};
+
#define HP_ACCEL_PM (&hp_accel_pm)
#else
#define HP_ACCEL_PM NULL
--
2.30.2
From: Alan Stern <[email protected]>
commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream.
Syzbot found that the kernel generates a WARNing if the user tries to
submit a bulk transfer through usbfs with a buffer that is way too
large. This isn't a bug in the kernel; it's merely an invalid request
from the user and the usbfs code does handle it correctly.
In theory the same thing can happen with async transfers, or with the
packet descriptor table for isochronous transfers.
To prevent the MM subsystem from complaining about these bad
allocation requests, add the __GFP_NOWARN flag to the kmalloc calls
for these buffers.
CC: Andrew Morton <[email protected]>
CC: <[email protected]>
Reported-and-tested-by: [email protected]
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/devio.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1218,7 +1218,12 @@ static int do_proc_bulk(struct usb_dev_s
ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
if (ret)
return ret;
- tbuf = kmalloc(len1, GFP_KERNEL);
+
+ /*
+ * len1 can be almost arbitrarily large. Don't WARN if it's
+ * too big, just fail the request.
+ */
+ tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN);
if (!tbuf) {
ret = -ENOMEM;
goto done;
@@ -1696,7 +1701,7 @@ static int proc_do_submiturb(struct usb_
if (num_sgs) {
as->urb->sg = kmalloc_array(num_sgs,
sizeof(struct scatterlist),
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (!as->urb->sg) {
ret = -ENOMEM;
goto error;
@@ -1731,7 +1736,7 @@ static int proc_do_submiturb(struct usb_
(uurb_start - as->usbm->vm_start);
} else {
as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (!as->urb->transfer_buffer) {
ret = -ENOMEM;
goto error;
From: Zou Wei <[email protected]>
[ Upstream commit 1e948b1752b58c9c570989ab29ceef5b38fdccda ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-cadence.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-cadence.c b/drivers/gpio/gpio-cadence.c
index a4d3239d2594..4ab3fcd9b9ba 100644
--- a/drivers/gpio/gpio-cadence.c
+++ b/drivers/gpio/gpio-cadence.c
@@ -278,6 +278,7 @@ static const struct of_device_id cdns_of_ids[] = {
{ .compatible = "cdns,gpio-r1p02" },
{ /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, cdns_of_ids);
static struct platform_driver cdns_gpio_driver = {
.driver = {
--
2.30.2
From: Paolo Abeni <[email protected]>
commit 3812ce895047afdb78dc750a236515416e0ccded upstream.
This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mptcp/options.c | 1 -
1 file changed, 1 deletion(-)
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -127,7 +127,6 @@ static void mptcp_parse_option(const str
memcpy(mp_opt->hmac, ptr, MPTCPOPT_HMAC_LEN);
pr_debug("MP_JOIN hmac");
} else {
- pr_warn("MP_JOIN bad option size");
mp_opt->mp_join = 0;
}
break;
From: Hou Pu <[email protected]>
commit 25df1acd2d36eb72b14c3d00f6b861b1e00b3aab upstream.
Using "<=" instead "<" to compare inline data size.
Fixes: bdaf13279192 ("nvmet-tcp: fix a segmentation fault during io parsing error")
Signed-off-by: Hou Pu <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/target/tcp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -538,7 +538,7 @@ static void nvmet_tcp_queue_response(str
* nvmet_req_init is completed.
*/
if (queue->rcv_state == NVMET_TCP_RECV_PDU &&
- len && len < cmd->req.port->inline_data_size &&
+ len && len <= cmd->req.port->inline_data_size &&
nvme_is_write(cmd->req.cmd))
return;
}
From: Paolo Abeni <[email protected]>
commit 29249eac5225429b898f278230a6ca2baa1ae154 upstream.
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178
Reported-and-tested-by: Maxim Galaganov <[email protected]>
Fixes: 18b683bff89d ("mptcp: queue data for mptcp level retransmission")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mptcp/protocol.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -758,11 +758,17 @@ static bool mptcp_skb_can_collapse_to(u6
return mpext && mpext->data_seq + mpext->data_len == write_seq;
}
+/* we can append data to the given data frag if:
+ * - there is space available in the backing page_frag
+ * - the data frag tail matches the current page_frag free offset
+ * - the data frag end sequence number matches the current write seq
+ */
static bool mptcp_frag_can_collapse_to(const struct mptcp_sock *msk,
const struct page_frag *pfrag,
const struct mptcp_data_frag *df)
{
return df && pfrag->page == df->page &&
+ pfrag->offset == (df->offset + df->data_len) &&
df->data_seq + df->data_len == msk->write_seq;
}
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit fd013265e5b5576a74a033920d6c571e08d7c423 ]
This reverts commit 5b711870bec4dc9a6d705d41e127e73944fa3650.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to do does nothing useful as a user
can do nothing with this information and if an error did happen, the
code would continue on as before. Because of this, just revert it.
Cc: Kangjie Lu <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/gspca/cpia1.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/media/usb/gspca/cpia1.c b/drivers/media/usb/gspca/cpia1.c
index a4f7431486f3..d93d384286c1 100644
--- a/drivers/media/usb/gspca/cpia1.c
+++ b/drivers/media/usb/gspca/cpia1.c
@@ -1424,7 +1424,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- int ret;
sd->mainsFreq = FREQ_DEF == V4L2_CID_POWER_LINE_FREQUENCY_60HZ;
reset_camera_params(gspca_dev);
@@ -1436,10 +1435,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam->cam_mode = mode;
cam->nmodes = ARRAY_SIZE(mode);
- ret = goto_low_power(gspca_dev);
- if (ret)
- gspca_err(gspca_dev, "Cannot go to low power mode: %d\n",
- ret);
+ goto_low_power(gspca_dev);
/* Check the firmware version. */
sd->params.version.firmwareVersion = 0;
get_version_information(gspca_dev);
--
2.30.2
From: Vladimir Oltean <[email protected]>
commit 6729188d2646709941903052e4b78e1d82c239b9 upstream.
The driver continues probing when a port is configured for an
unsupported PHY interface type, instead it should stop.
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -206,6 +206,7 @@ static int sja1105_init_mii_settings(str
default:
dev_err(dev, "Unsupported PHY mode %s!\n",
phy_modes(ports[i].phy_mode));
+ return -EINVAL;
}
/* Even though the SerDes port is able to drive SGMII autoneg
From: Atul Gopinathan <[email protected]>
[ Upstream commit 3890e3dea315f1a257d1b940a2a4e2fa16a7b095 ]
The macro "spi_register_driver" invokes the function
"__spi_register_driver()" which has a return type of int and can fail,
returning a negative value in such a case. This is currently ignored and
the init() function yields success even if the spi driver failed to
register.
Fix this by collecting the return value of "__spi_register_driver()" and
also unregister the uart driver in case of failure.
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Atul Gopinathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/max310x.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index f60b7b86d099..5bf8dd6198bb 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1527,10 +1527,12 @@ static int __init max310x_uart_init(void)
return ret;
#ifdef CONFIG_SPI_MASTER
- spi_register_driver(&max310x_spi_driver);
+ ret = spi_register_driver(&max310x_spi_driver);
+ if (ret)
+ uart_unregister_driver(&max310x_uart);
#endif
- return 0;
+ return ret;
}
module_init(max310x_uart_init);
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 5f94eaa4ee23e80841fa359a372f84cfe25daee1 ]
This reverts commit 9f4d6358e11bbc7b839f9419636188e4151fb6e4.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original change does not change any behavior as the caller of this
function onlyu checks for "== -1" as an error condition so this error is
not handled properly. Remove this change and it will be fixed up
properly in a later commit.
Cc: Kangjie Lu <[email protected]>
Cc: David S. Miller <[email protected]>
Reviewed-by: Dominik Brodowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index a7b7a4aace79..dc90c61fc827 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -547,11 +547,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
return -1;
base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
- if (!base) {
- pcmcia_release_window(link, link->resource[2]);
- return -ENOMEM;
- }
-
pcmcia_map_mem_page(link, link->resource[2], 0);
/*
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 4df07045fcfd684379a394d0f2aa0cc4067bda2a ]
This reverts commit c5dea815834c7d2e9fc633785455bc428b7a1956.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original change here was pointless as dev can never be NULL in this
function so the claim in the changelog that this "fixes" anything is
incorrect (also the developer forgot about panic_on_warn). A follow-up
change will resolve this issue properly.
Cc: Aditya Pakki <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/caif/caif_serial.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index bcc14c5875bf..4cc0d91d9c87 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -270,9 +270,7 @@ static netdev_tx_t caif_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ser_device *ser;
- if (WARN_ON(!dev))
- return -EINVAL;
-
+ BUG_ON(dev == NULL);
ser = netdev_priv(dev);
/* Send flow off once, on high water mark */
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 4b059ce1f4b368208c2310925f49be77f15e527b ]
This reverts commit beae77170c60aa786f3e4599c18ead2854d8694d.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It is safe to ignore this error as the
mixer element is optional, and the driver is very legacy.
Cc: Aditya Pakki <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/sb/sb16_main.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c
index 38dc1fde25f3..aa4870531023 100644
--- a/sound/isa/sb/sb16_main.c
+++ b/sound/isa/sb/sb16_main.c
@@ -846,14 +846,10 @@ int snd_sb16dsp_pcm(struct snd_sb *chip, int device)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sb16_playback_ops);
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_sb16_capture_ops);
- if (chip->dma16 >= 0 && chip->dma8 != chip->dma16) {
- err = snd_ctl_add(card, snd_ctl_new1(
- &snd_sb16_dma_control, chip));
- if (err)
- return err;
- } else {
+ if (chip->dma16 >= 0 && chip->dma8 != chip->dma16)
+ snd_ctl_add(card, snd_ctl_new1(&snd_sb16_dma_control, chip));
+ else
pcm->info_flags = SNDRV_PCM_INFO_HALF_DUPLEX;
- }
snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
card->dev, 64*1024, 128*1024);
--
2.30.2
From: Du Cheng <[email protected]>
[ Upstream commit 65a67792e3416f7c5d7daa47d99334cbb19a7449 ]
The condition of dev == NULL is impossible in caif_xmit(), hence it is
for the removal.
Explanation:
The static caif_xmit() is only called upon via a function pointer
`ndo_start_xmit` defined in include/linux/netdevice.h:
```
struct net_device_ops {
...
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
...
}
```
The exhausive list of call points are:
```
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c
dev->netdev_ops->ndo_start_xmit(skb, dev);
^ ^
drivers/infiniband/ulp/opa_vnic/opa_vnic_netdev.c
struct opa_vnic_adapter *adapter = opa_vnic_priv(netdev);
^ ^
return adapter->rn_ops->ndo_start_xmit(skb, netdev); // adapter would crash first
^ ^
drivers/usb/gadget/function/f_ncm.c
ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev);
^ ^
include/linux/netdevice.h
static inline netdev_tx_t __netdev_start_xmit(...
{
return ops->ndo_start_xmit(skb, dev);
^
}
const struct net_device_ops *ops = dev->netdev_ops;
^
rc = __netdev_start_xmit(ops, skb, dev, more);
^
```
In each of the enumerated scenarios, it is impossible for the NULL-valued dev to
reach the caif_xmit() without crashing the kernel earlier, therefore `BUG_ON(dev ==
NULL)` is rather useless, hence the removal.
Cc: David S. Miller <[email protected]>
Signed-off-by: Du Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/caif/caif_serial.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index 4cc0d91d9c87..d025ea434933 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -270,7 +270,6 @@ static netdev_tx_t caif_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ser_device *ser;
- BUG_ON(dev == NULL);
ser = netdev_priv(dev);
/* Send flow off once, on high water mark */
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 5369ead83f5aff223b6418c99cb1fe9a8f007363 ]
This reverts commit e183d4e414b64711baf7a04e214b61969ca08dfa.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit causes a memory leak and does not properly fix the
issue it claims to fix. I will send a follow-on patch to resolve this
properly.
Cc: Kangjie Lu <[email protected]>
Cc: Ursula Braun <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/smc_ism.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c
index 6abbdd09a580..b4a9fe452470 100644
--- a/net/smc/smc_ism.c
+++ b/net/smc/smc_ism.c
@@ -319,11 +319,6 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name,
init_waitqueue_head(&smcd->lgrs_deleted);
smcd->event_wq = alloc_ordered_workqueue("ism_evt_wq-%s)",
WQ_MEM_RECLAIM, name);
- if (!smcd->event_wq) {
- kfree(smcd->conn);
- kfree(smcd);
- return NULL;
- }
return smcd;
}
EXPORT_SYMBOL_GPL(smcd_alloc_dev);
--
2.30.2
From: Tom Seewald <[email protected]>
[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ]
The function hpet_resources() calls ioremap() two times, but in both
cases it does not check if ioremap() returned a null pointer. Fix this
by adding null pointer checks and returning an appropriate error.
Signed-off-by: Tom Seewald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hpet.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 6f13def6c172..8b55085650ad 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -969,6 +969,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
if (ACPI_SUCCESS(status)) {
hdp->hd_phys_address = addr.address.minimum;
hdp->hd_address = ioremap(addr.address.minimum, addr.address.address_length);
+ if (!hdp->hd_address)
+ return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
@@ -982,6 +984,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
hdp->hd_phys_address = fixmem32->address;
hdp->hd_address = ioremap(fixmem32->address,
HPET_RANGE_SIZE);
+ if (!hdp->hd_address)
+ return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
--
2.30.2
From: Vladimir Oltean <[email protected]>
commit cec279a898a3b004411682f212215ccaea1cd0fb upstream.
If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.
Fixes: 0a7bdbc23d8a ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c")
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2922,13 +2922,13 @@ static int sja1105_setup(struct dsa_swit
rc = sja1105_static_config_load(priv, ports);
if (rc < 0) {
dev_err(ds->dev, "Failed to load static config: %d\n", rc);
- return rc;
+ goto out_ptp_clock_unregister;
}
/* Configure the CGU (PHY link modes and speeds) */
rc = sja1105_clocking_setup(priv);
if (rc < 0) {
dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
- return rc;
+ goto out_static_config_free;
}
/* On SJA1105, VLAN filtering per se is always enabled in hardware.
* The only thing we can do to disable it is lie about what the 802.1Q
@@ -2949,7 +2949,7 @@ static int sja1105_setup(struct dsa_swit
rc = sja1105_devlink_setup(ds);
if (rc < 0)
- return rc;
+ goto out_static_config_free;
/* The DSA/switchdev model brings up switch ports in standalone mode by
* default, and that means vlan_filtering is 0 since they're not under
@@ -2958,6 +2958,17 @@ static int sja1105_setup(struct dsa_swit
rtnl_lock();
rc = sja1105_setup_8021q_tagging(ds, true);
rtnl_unlock();
+ if (rc)
+ goto out_devlink_teardown;
+
+ return 0;
+
+out_devlink_teardown:
+ sja1105_devlink_teardown(ds);
+out_ptp_clock_unregister:
+ sja1105_ptp_clock_unregister(ds);
+out_static_config_free:
+ sja1105_static_config_free(&priv->static_config);
return rc;
}
From: Anirudh Rayabharam <[email protected]>
[ Upstream commit 52202be1cd996cde6e8969a128dc27ee45a7cb5e ]
In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer
deref. To fix this, check the return value of ioremap and return -1
to the caller in case of failure.
Cc: "David S. Miller" <[email protected]>
Acked-by: Dominik Brodowski <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index dc90c61fc827..b0c0504950d8 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -547,6 +547,11 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
return -1;
base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+ if (!base) {
+ pcmcia_release_window(link, link->resource[2]);
+ return -1;
+ }
+
pcmcia_map_mem_page(link, link->resource[2], 0);
/*
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 566f53238da74801b48e985788e5f7c9159e5940 ]
This reverts commit 13bd14a41ce3105d5b1f3cd8b4d1e249d17b6d9b.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
While this is technically correct, it is only fixing ONE of these errors
in this function, so the patch is not fully correct. I'll leave this
revert and provide a fix for this later that resolves this same
"problem" everywhere in this function.
Cc: Kangjie Lu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hpet.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index ed3b7dab678d..6f13def6c172 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -969,8 +969,6 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
if (ACPI_SUCCESS(status)) {
hdp->hd_phys_address = addr.address.minimum;
hdp->hd_address = ioremap(addr.address.minimum, addr.address.address_length);
- if (!hdp->hd_address)
- return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 1dacca7fa1ebea47d38d20cd2df37094805d2649 ]
This reverts commit 0f25e000cb4398081748e54f62a902098aa79ec1.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit did nothing if there was an error, except to print
out a message, which is pointless. So remove the commit as it gives a
"false sense of doing something".
Cc: Kangjie Lu <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/gus/gus_main.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c
index afc088f0377c..b7518122a10d 100644
--- a/sound/isa/gus/gus_main.c
+++ b/sound/isa/gus/gus_main.c
@@ -77,17 +77,8 @@ static const struct snd_kcontrol_new snd_gus_joystick_control = {
static void snd_gus_init_control(struct snd_gus_card *gus)
{
- int ret;
-
- if (!gus->ace_flag) {
- ret =
- snd_ctl_add(gus->card,
- snd_ctl_new1(&snd_gus_joystick_control,
- gus));
- if (ret)
- snd_printk(KERN_ERR "gus: snd_ctl_add failed: %d\n",
- ret);
- }
+ if (!gus->ace_flag)
+ snd_ctl_add(gus->card, snd_ctl_new1(&snd_gus_joystick_control, gus));
}
/*
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit b0a85abbe92e1a6f3e8580a4590fa7245de7090b ]
This reverts commit 51f689cc11333944c7a457f25ec75fcb41e99410.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This change did not properly unwind from the error condition, so it was
not correct.
Cc: Kangjie Lu <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/max310x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 8434bd5a8ec7..f60b7b86d099 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1527,10 +1527,10 @@ static int __init max310x_uart_init(void)
return ret;
#ifdef CONFIG_SPI_MASTER
- ret = spi_register_driver(&max310x_spi_driver);
+ spi_register_driver(&max310x_spi_driver);
#endif
- return ret;
+ return 0;
}
module_init(max310x_uart_init);
--
2.30.2
From: Atul Gopinathan <[email protected]>
[ Upstream commit a28591f61b60fac820c6de59826ffa710e5e314e ]
The field "fm_res" of "struct snd_sb8" is never used/dereferenced
throughout the sb8.c code. Therefore there is no need for any null value
check after the "request_region()".
Add a comment note to make developers know about this and prevent any
"NULL check" patches on this part of code.
Cc: Takashi Iwai <[email protected]>
Signed-off-by: Atul Gopinathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/sb/sb8.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c
index ae93191ffdc9..8b21920be4bb 100644
--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -94,7 +94,11 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev)
acard = card->private_data;
card->private_free = snd_sb8_free;
- /* block the 0x388 port to avoid PnP conflicts */
+ /*
+ * Block the 0x388 port to avoid PnP conflicts.
+ * No need to check this value after request_region,
+ * as we never do anything with it.
+ */
acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
if (port[dev] != SNDRV_AUTO_PORT) {
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit abd7bca23bd4247124265152d00ffd4b2b0d6877 ]
This reverts commit d721fe99f6ada070ae8fc0ec3e01ce5a42def0d9.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit was incorrect, it should have never have used
"unlikely()" and if it ever does trigger, resources are left grabbed.
Given there are no users for this code around, I'll just revert this and
leave it "as is" as the odds that ioremap() will ever fail here is
horrendiously low.
Cc: Kangjie Lu <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/mISDNinfineon.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index a16c7a2a7f3d..fa9c491f9c38 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -697,11 +697,8 @@ setup_io(struct inf_hw *hw)
(ulong)hw->addr.start, (ulong)hw->addr.size);
return err;
}
- if (hw->ci->addr_mode == AM_MEMIO) {
+ if (hw->ci->addr_mode == AM_MEMIO)
hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
- if (unlikely(!hw->addr.p))
- return -ENOMEM;
- }
hw->addr.mode = hw->ci->addr_mode;
if (debug & DEBUG_HW)
pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n",
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 4667a6fc1777ce071504bab570d3599107f4790f ]
This reverts commit a2c6433ee5a35a8de6d563f6512a26f87835ea0f.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original patch was incorrect, and would leak memory if the error
path the patch added was hit.
Cc: Aditya Pakki <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/usx2y/usb_stream.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c
index 091c071b270a..6bba17bf689a 100644
--- a/sound/usb/usx2y/usb_stream.c
+++ b/sound/usb/usx2y/usb_stream.c
@@ -91,12 +91,7 @@ static int init_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
for (u = 0; u < USB_STREAM_NURBS; ++u) {
sk->inurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL);
- if (!sk->inurb[u])
- return -ENOMEM;
-
sk->outurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL);
- if (!sk->outurb[u])
- return -ENOMEM;
}
if (init_pipe_urbs(sk, use_packsize, sk->inurb, indata, dev, in_pipe) ||
--
2.30.2
From: Anirudh Rayabharam <[email protected]>
[ Upstream commit bbeb18f27a44ce6adb00d2316968bc59dc640b9b ]
In smcd_alloc_dev(), if alloc_ordered_workqueue() fails, properly catch
it, clean up and return NULL to let the caller know there was a failure.
Move the call to alloc_ordered_workqueue higher in the function in order
to abort earlier without needing to unwind the call to device_initialize().
Cc: Ursula Braun <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/smc_ism.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c
index b4a9fe452470..024ca21392f7 100644
--- a/net/smc/smc_ism.c
+++ b/net/smc/smc_ism.c
@@ -304,6 +304,14 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name,
return NULL;
}
+ smcd->event_wq = alloc_ordered_workqueue("ism_evt_wq-%s)",
+ WQ_MEM_RECLAIM, name);
+ if (!smcd->event_wq) {
+ kfree(smcd->conn);
+ kfree(smcd);
+ return NULL;
+ }
+
smcd->dev.parent = parent;
smcd->dev.release = smcd_release;
device_initialize(&smcd->dev);
@@ -317,8 +325,6 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name,
INIT_LIST_HEAD(&smcd->vlan);
INIT_LIST_HEAD(&smcd->lgr_list);
init_waitqueue_head(&smcd->lgrs_deleted);
- smcd->event_wq = alloc_ordered_workqueue("ism_evt_wq-%s)",
- WQ_MEM_RECLAIM, name);
return smcd;
}
EXPORT_SYMBOL_GPL(smcd_alloc_dev);
--
2.30.2
From: Vladimir Oltean <[email protected]>
commit ba61cf167cb77e54c1ec5adb7aa49a22ab3c9b28 upstream.
At the beginning of the sja1105_dynamic_config.c file there is a diagram
of the dynamic config interface layout:
packed_buf
|
V
+-----------------------------------------+------------------+
| ENTRY BUFFER | COMMAND BUFFER |
+-----------------------------------------+------------------+
<----------------------- packed_size ------------------------>
So in order to pack/unpack the command bits into the buffer,
sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by
the length of the entry. This is similar to what the other *cmd_packing
functions do.
This bug exists because the command packing function for P/Q/R/S was
copied from the E/T generation, and on E/T, the command was actually
embedded within the entry buffer itself.
Fixes: 94f94d4acfb2 ("net: dsa: sja1105: add static tables for virtual links")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_dynamic_config.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
--- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
@@ -167,9 +167,10 @@ enum sja1105_hostcmd {
SJA1105_HOSTCMD_INVALIDATE = 4,
};
+/* Command and entry overlap */
static void
-sja1105_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
- enum packing_op op)
+sja1105et_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+ enum packing_op op)
{
const int size = SJA1105_SIZE_DYN_CMD;
@@ -179,6 +180,20 @@ sja1105_vl_lookup_cmd_packing(void *buf,
sja1105_packing(buf, &cmd->index, 9, 0, size, op);
}
+/* Command and entry are separate */
+static void
+sja1105pqrs_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+ enum packing_op op)
+{
+ u8 *p = buf + SJA1105_SIZE_VL_LOOKUP_ENTRY;
+ const int size = SJA1105_SIZE_DYN_CMD;
+
+ sja1105_packing(p, &cmd->valid, 31, 31, size, op);
+ sja1105_packing(p, &cmd->errors, 30, 30, size, op);
+ sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
+ sja1105_packing(p, &cmd->index, 9, 0, size, op);
+}
+
static size_t sja1105et_vl_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
@@ -641,7 +656,7 @@ static size_t sja1105pqrs_cbs_entry_pack
const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
[BLK_IDX_VL_LOOKUP] = {
.entry_packing = sja1105et_vl_lookup_entry_packing,
- .cmd_packing = sja1105_vl_lookup_cmd_packing,
+ .cmd_packing = sja1105et_vl_lookup_cmd_packing,
.access = OP_WRITE,
.max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT,
.packed_size = SJA1105ET_SIZE_VL_LOOKUP_DYN_CMD,
@@ -725,7 +740,7 @@ const struct sja1105_dynamic_table_ops s
const struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
[BLK_IDX_VL_LOOKUP] = {
.entry_packing = sja1105_vl_lookup_entry_packing,
- .cmd_packing = sja1105_vl_lookup_cmd_packing,
+ .cmd_packing = sja1105pqrs_vl_lookup_cmd_packing,
.access = (OP_READ | OP_WRITE),
.max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT,
.packed_size = SJA1105PQRS_SIZE_VL_LOOKUP_DYN_CMD,
From: Vladimir Oltean <[email protected]>
commit dc596e3fe63f88e3d1e509f64e7f761cd4135538 upstream.
Unlike other drivers which pretty much end their .probe() execution with
dsa_register_switch(), the sja1105 does some extra stuff. When that
fails with -ENOMEM, the driver is quick to return that, forgetting to
call dsa_unregister_switch(). Not critical, but a bug nonetheless.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Fixes: a68578c20a96 ("net: dsa: Make deferred_xmit private to sja1105")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -3483,8 +3483,10 @@ static int sja1105_probe(struct spi_devi
priv->cbs = devm_kcalloc(dev, priv->info->num_cbs_shapers,
sizeof(struct sja1105_cbs_entry),
GFP_KERNEL);
- if (!priv->cbs)
- return -ENOMEM;
+ if (!priv->cbs) {
+ rc = -ENOMEM;
+ goto out_unregister_switch;
+ }
}
/* Connections between dsa_port and sja1105_port */
@@ -3509,7 +3511,7 @@ static int sja1105_probe(struct spi_devi
dev_err(ds->dev,
"failed to create deferred xmit thread: %d\n",
rc);
- goto out;
+ goto out_destroy_workers;
}
skb_queue_head_init(&sp->xmit_queue);
sp->xmit_tpid = ETH_P_SJA1105;
@@ -3519,7 +3521,8 @@ static int sja1105_probe(struct spi_devi
}
return 0;
-out:
+
+out_destroy_workers:
while (port-- > 0) {
struct sja1105_port *sp = &priv->ports[port];
@@ -3528,6 +3531,10 @@ out:
kthread_destroy_worker(sp->xmit_worker);
}
+
+out_unregister_switch:
+ dsa_unregister_switch(ds);
+
return rc;
}
From: Krzysztof Kozlowski <[email protected]>
commit 24990423267ec283b9d86f07f362b753eb9b0ed5 upstream.
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-s3c2410.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -483,7 +483,10 @@ static int i2c_s3c_irq_nextbyte(struct s
* forces us to send a new START
* when we change direction
*/
+ dev_dbg(i2c->dev,
+ "missing START before write->read\n");
s3c24xx_i2c_stop(i2c, -EINVAL);
+ break;
}
goto retry_write;
From: Geert Uytterhoeven <[email protected]>
commit c4740e293c93c747e65d53d9aacc2ba8521d1489 upstream.
When switching the Gen3 SoCs to the new clock calculation formulas, the
match entry for RZ/G2E added in commit 51243b73455f2d12 ("i2c:
sh_mobile: Add support for r8a774c0 (RZ/G2E)") was forgotten.
Fixes: e8a27567509b2439 ("i2c: sh_mobile: use new clock calculation formulas for Gen3")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Fabrizio Castro <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-sh_mobile.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -807,7 +807,7 @@ static const struct sh_mobile_dt_config
static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
- { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-r8a774c0", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
From: Phillip Potter <[email protected]>
[ Upstream commit c446f0d4702d316e1c6bf621f70e79678d28830a ]
Move hw->cfg.mode and hw->addr.mode assignments from hw->ci->cfg_mode
and hw->ci->addr_mode respectively, to be before the subsequent checks
for memory IO mode (and possible ioremap calls in this case).
Also introduce ioremap error checks at both locations. This allows
resources to be properly freed on ioremap failure, as when the caller
of setup_io then subsequently calls release_io via its error path,
release_io can now correctly determine the mode as it has been set
before the ioremap call.
Finally, refactor release_io function so that it will call
release_mem_region in the memory IO case, regardless of whether or not
hw->cfg.p/hw->addr.p are NULL. This means resources are then properly
released on failure.
This properly implements the original reverted commit (d721fe99f6ad)
from the University of Minnesota, whilst also implementing the ioremap
check for the hw->ci->cfg_mode if block as well.
Cc: David S. Miller <[email protected]>
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/mISDNinfineon.c | 24 ++++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index fa9c491f9c38..88d592bafdb0 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -630,17 +630,19 @@ static void
release_io(struct inf_hw *hw)
{
if (hw->cfg.mode) {
- if (hw->cfg.p) {
+ if (hw->cfg.mode == AM_MEMIO) {
release_mem_region(hw->cfg.start, hw->cfg.size);
- iounmap(hw->cfg.p);
+ if (hw->cfg.p)
+ iounmap(hw->cfg.p);
} else
release_region(hw->cfg.start, hw->cfg.size);
hw->cfg.mode = AM_NONE;
}
if (hw->addr.mode) {
- if (hw->addr.p) {
+ if (hw->addr.mode == AM_MEMIO) {
release_mem_region(hw->addr.start, hw->addr.size);
- iounmap(hw->addr.p);
+ if (hw->addr.p)
+ iounmap(hw->addr.p);
} else
release_region(hw->addr.start, hw->addr.size);
hw->addr.mode = AM_NONE;
@@ -670,9 +672,12 @@ setup_io(struct inf_hw *hw)
(ulong)hw->cfg.start, (ulong)hw->cfg.size);
return err;
}
- if (hw->ci->cfg_mode == AM_MEMIO)
- hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
hw->cfg.mode = hw->ci->cfg_mode;
+ if (hw->ci->cfg_mode == AM_MEMIO) {
+ hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
+ if (!hw->cfg.p)
+ return -ENOMEM;
+ }
if (debug & DEBUG_HW)
pr_notice("%s: IO cfg %lx (%lu bytes) mode%d\n",
hw->name, (ulong)hw->cfg.start,
@@ -697,9 +702,12 @@ setup_io(struct inf_hw *hw)
(ulong)hw->addr.start, (ulong)hw->addr.size);
return err;
}
- if (hw->ci->addr_mode == AM_MEMIO)
- hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
hw->addr.mode = hw->ci->addr_mode;
+ if (hw->ci->addr_mode == AM_MEMIO) {
+ hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
+ if (!hw->addr.p)
+ return -ENOMEM;
+ }
if (debug & DEBUG_HW)
pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n",
hw->name, (ulong)hw->addr.start,
--
2.30.2
From: Qii Wang <[email protected]>
commit fed1bd51a504eb96caa38b4f13ab138fc169ea75 upstream.
The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.
Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-mt65xx.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -478,6 +478,11 @@ static void mtk_i2c_clock_disable(struct
static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
+ u16 intr_stat_reg;
+
+ mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START);
+ intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
+ mtk_i2c_writew(i2c, intr_stat_reg, OFFSET_INTR_STAT);
if (i2c->dev_comp->apdma_sync) {
writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit efba106f89fc6848726716c101f4c84e88720a9c ]
This reverts commit fc6a6521556c8250e356ddc6a3f2391aa62dc976.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The change being reverted does NOTHING as the caller to this function
does not even look at the return value of the call. So the "claim" that
this fixed an an issue is not true. It will be fixed up properly in a
future patch by propagating the error up the stack correctly.
Cc: Kangjie Lu <[email protected]>
Cc: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath6kl/wmi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index dbc47702a268..99be0d20f9a5 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -776,8 +776,10 @@ int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi)
cmd->info.params.roam_rssi_floor = DEF_LRSSI_ROAM_FLOOR;
cmd->roam_ctrl = WMI_SET_LRSSI_SCAN_PARAMS;
- return ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID,
+ ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID,
NO_SYNC_WMIFLAG);
+
+ return 0;
}
int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit d8c3be2fb2079d0cb4cd29d6aba58dbe54771e42 ]
This reverts commit 656025850074f5c1ba2e05be37bda57ba2b8d491.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Different error values should never be "OR" together and expect anything
sane to come out of the result.
Cc: Aditya Pakki <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/gspca/m5602/m5602_mt9m111.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
index bfa3b381d8a2..50481dc928d0 100644
--- a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
+++ b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
@@ -195,7 +195,7 @@ static const struct v4l2_ctrl_config mt9m111_greenbal_cfg = {
int mt9m111_probe(struct sd *sd)
{
u8 data[2] = {0x00, 0x00};
- int i, rc = 0;
+ int i;
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
if (force_sensor) {
@@ -213,18 +213,16 @@ int mt9m111_probe(struct sd *sd)
/* Do the preinit */
for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) {
if (preinit_mt9m111[i][0] == BRIDGE) {
- rc |= m5602_write_bridge(sd,
+ m5602_write_bridge(sd,
preinit_mt9m111[i][1],
preinit_mt9m111[i][2]);
} else {
data[0] = preinit_mt9m111[i][2];
data[1] = preinit_mt9m111[i][3];
- rc |= m5602_write_sensor(sd,
+ m5602_write_sensor(sd,
preinit_mt9m111[i][1], data, 2);
}
}
- if (rc < 0)
- return rc;
if (m5602_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2))
return -ENODEV;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 36a2c87f7ed9e305d05b9a5c044cc6c494771504 ]
This reverts commit 38d22659803a033b1b66cd2624c33570c0dde77d.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
While it looks like the original change is correct, it is not, as none
of the setup actually happens, and the error value is not propagated
upwards.
Cc: Aditya Pakki <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/hfcsusb.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 70061991915a..4bb470d3963d 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -249,9 +249,6 @@ hfcsusb_ph_info(struct hfcsusb *hw)
int i;
phi = kzalloc(struct_size(phi, bch, dch->dev.nrbchan), GFP_ATOMIC);
- if (!phi)
- return;
-
phi->dch.ch.protocol = hw->protocol;
phi->dch.ch.Flags = dch->Flags;
phi->dch.state = dch->state;
--
2.30.2
From: Alaa Emad <[email protected]>
[ Upstream commit e932f5b458eee63d013578ea128b9ff8ef5f5496 ]
If m5602_write_bridge times out, it will return a negative error value.
So properly check for this and handle the error correctly instead of
just ignoring it.
Cc: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Alaa Emad <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/gspca/m5602/m5602_mt9m111.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
index 50481dc928d0..bf1af6ed9131 100644
--- a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
+++ b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c
@@ -195,7 +195,7 @@ static const struct v4l2_ctrl_config mt9m111_greenbal_cfg = {
int mt9m111_probe(struct sd *sd)
{
u8 data[2] = {0x00, 0x00};
- int i;
+ int i, err;
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
if (force_sensor) {
@@ -213,15 +213,17 @@ int mt9m111_probe(struct sd *sd)
/* Do the preinit */
for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) {
if (preinit_mt9m111[i][0] == BRIDGE) {
- m5602_write_bridge(sd,
- preinit_mt9m111[i][1],
- preinit_mt9m111[i][2]);
+ err = m5602_write_bridge(sd,
+ preinit_mt9m111[i][1],
+ preinit_mt9m111[i][2]);
} else {
data[0] = preinit_mt9m111[i][2];
data[1] = preinit_mt9m111[i][3];
- m5602_write_sensor(sd,
- preinit_mt9m111[i][1], data, 2);
+ err = m5602_write_sensor(sd,
+ preinit_mt9m111[i][1], data, 2);
}
+ if (err < 0)
+ return err;
}
if (m5602_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2))
--
2.30.2
From: Jean Delvare <[email protected]>
commit e4d8716c3dcec47f1557024add24e1f3c09eb24b upstream.
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions")
Reported-by: [email protected]
Signed-off-by: Jean Delvare <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Cc: Jarkko Nikula <[email protected]>
Tested-by: Jarkko Nikula <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-i801.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -391,11 +391,9 @@ static int i801_check_post(struct i801_p
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
- SMBHSTCNT(priv));
+ outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
- SMBHSTCNT(priv));
+ outb_p(0, SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
From: Vladimir Oltean <[email protected]>
commit b38e659de966a122fe2cb178c1e39c9bea06bc62 upstream.
When running this sequence of operations:
ip link add br0 type bridge vlan_filtering 1
ip link set swp4 master br0
bridge vlan add dev swp4 vid 1
We observe the traffic sent on swp4 is still untagged, even though the
bridge has overwritten the existing VLAN entry:
port vlan ids
swp4 1 PVID
br0 1 PVID Egress Untagged
This happens because we didn't consider that the 'bridge vlan add'
command just overwrites VLANs like it's nothing. We treat the 'vid 1
pvid untagged' and the 'vid 1' as two separate VLANs, and the first
still has precedence when calling sja1105_build_vlan_table. Obviously
there is a disagreement regarding semantics, and we end up doing
something unexpected from the PoV of the bridge.
Let's actually consider an "existing VLAN" to be one which is on the
same port, and has the same VLAN ID, as one we already have, and update
it if it has different flags than we do.
The first blamed commit is the one introducing the bug, the second one
is the latest on top of which the bugfix still applies.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Fixes: 5899ee367ab3 ("net: dsa: tag_8021q: add a context structure")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2756,11 +2756,22 @@ static int sja1105_vlan_add_one(struct d
bool pvid = flags & BRIDGE_VLAN_INFO_PVID;
struct sja1105_bridge_vlan *v;
- list_for_each_entry(v, vlan_list, list)
- if (v->port == port && v->vid == vid &&
- v->untagged == untagged && v->pvid == pvid)
+ list_for_each_entry(v, vlan_list, list) {
+ if (v->port == port && v->vid == vid) {
/* Already added */
- return 0;
+ if (v->untagged == untagged && v->pvid == pvid)
+ /* Nothing changed */
+ return 0;
+
+ /* It's the same VLAN, but some of the flags changed
+ * and the user did not bother to delete it first.
+ * Update it and trigger sja1105_build_vlan_table.
+ */
+ v->untagged = untagged;
+ v->pvid = pvid;
+ return 1;
+ }
+ }
v = kzalloc(sizeof(*v), GFP_KERNEL);
if (!v) {
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 4fd798a5a89114c1892574c50f2aebd49bc5b4f5 ]
This reverts commit fe543b2f174f34a7a751aa08b334fe6b105c4569.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
While the original commit does keep the immediate "NULL dereference"
from happening, it does not properly propagate the error back to the
callers, AND it does not fix this same identical issue in the
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c for some reason.
Cc: Kangjie Lu <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/liquidio/lio_main.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index 7d00d3a8ded4..e4c220f30040 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -1166,11 +1166,6 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE,
16, 0);
- if (!sc) {
- netif_info(lio, rx_err, lio->netdev,
- "Failed to allocate octeon_soft_command\n");
- return;
- }
ncmd = (union octnet_cmd *)sc->virtdptr;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 8e23e83c752b54e98102627a1cc09281ad71a299 ]
This reverts commit a21a0eb56b4e8fe4a330243af8030f890cde2283.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Different error values should never be "OR" together and expect anything
sane to come out of the result.
Cc: Aditya Pakki <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/gspca/m5602/m5602_po1030.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c
index d680b777f097..7bdbb8065146 100644
--- a/drivers/media/usb/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c
@@ -154,7 +154,6 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = {
int po1030_probe(struct sd *sd)
{
- int rc = 0;
u8 dev_id_h = 0, i;
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
@@ -174,14 +173,11 @@ int po1030_probe(struct sd *sd)
for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
u8 data = preinit_po1030[i][2];
if (preinit_po1030[i][0] == SENSOR)
- rc |= m5602_write_sensor(sd,
+ m5602_write_sensor(sd,
preinit_po1030[i][1], &data, 1);
else
- rc |= m5602_write_bridge(sd, preinit_po1030[i][1],
- data);
+ m5602_write_bridge(sd, preinit_po1030[i][1], data);
}
- if (rc < 0)
- return rc;
if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
return -ENODEV;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 30a350947692f794796f563029d29764497f2887 ]
This reverts commit 42daad3343be4a4e1ee03e30a5f5cc731dadfef5.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit here did nothing to actually help if usb_register()
failed, so it gives a "false sense of security" when there is none. The
correct solution is to correctly unwind from this error.
Cc: Kangjie Lu <[email protected]>
Cc: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 586f4dfc638b..d2a803fc8ac6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1586,10 +1586,6 @@ void brcmf_usb_exit(void)
void brcmf_usb_register(void)
{
- int ret;
-
brcmf_dbg(USB, "Enter\n");
- ret = usb_register(&brcmf_usbdrvr);
- if (ret)
- brcmf_err("usb_register failed %d\n", ret);
+ usb_register(&brcmf_usbdrvr);
}
--
2.30.2
From: Alaa Emad <[email protected]>
[ Upstream commit c6d822c56e7fd29e6fa1b1bb91b98f6a1e942b3c ]
The function sp8870_readreg returns a negative value when i2c_transfer
fails so properly check for this and return the error if it happens.
Cc: Sean Young <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Alaa Emad <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-frontends/sp8870.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
index ee893a2f2261..9767159aeb9b 100644
--- a/drivers/media/dvb-frontends/sp8870.c
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -280,7 +280,9 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
sp8870_writereg(state, 0xc05, reg0xc05);
// read status reg in order to clear pending irqs
- sp8870_readreg(state, 0x200);
+ err = sp8870_readreg(state, 0x200);
+ if (err < 0)
+ return err;
// system controller start
sp8870_microcontroller_start(state);
--
2.30.2
From: Phillip Potter <[email protected]>
[ Upstream commit 5265db2ccc735e2783b790d6c19fb5cee8c025ed ]
Modify return type of hfcusb_ph_info to int, so that we can pass error
value up the call stack when allocation of ph_info fails. Also change
three of four call sites to actually account for the memory failure.
The fourth, in ph_state_nt, is infeasible to change as it is in turn
called by ph_state which is used as a function pointer argument to
mISDN_initdchannel, which would necessitate changing its signature
and updating all the places where it is used (too many).
Fixes original flawed commit (38d22659803a) from the University of
Minnesota.
Cc: David S. Miller <[email protected]>
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/hfcsusb.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 4bb470d3963d..cd5642cef01f 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -46,7 +46,7 @@ static void hfcsusb_start_endpoint(struct hfcsusb *hw, int channel);
static void hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel);
static int hfcsusb_setup_bch(struct bchannel *bch, int protocol);
static void deactivate_bchannel(struct bchannel *bch);
-static void hfcsusb_ph_info(struct hfcsusb *hw);
+static int hfcsusb_ph_info(struct hfcsusb *hw);
/* start next background transfer for control channel */
static void
@@ -241,7 +241,7 @@ hfcusb_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
* send full D/B channel status information
* as MPH_INFORMATION_IND
*/
-static void
+static int
hfcsusb_ph_info(struct hfcsusb *hw)
{
struct ph_info *phi;
@@ -249,6 +249,9 @@ hfcsusb_ph_info(struct hfcsusb *hw)
int i;
phi = kzalloc(struct_size(phi, bch, dch->dev.nrbchan), GFP_ATOMIC);
+ if (!phi)
+ return -ENOMEM;
+
phi->dch.ch.protocol = hw->protocol;
phi->dch.ch.Flags = dch->Flags;
phi->dch.state = dch->state;
@@ -260,6 +263,8 @@ hfcsusb_ph_info(struct hfcsusb *hw)
_queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY,
struct_size(phi, bch, dch->dev.nrbchan), phi, GFP_ATOMIC);
kfree(phi);
+
+ return 0;
}
/*
@@ -344,8 +349,7 @@ hfcusb_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
ret = l1_event(dch->l1, hh->prim);
break;
case MPH_INFORMATION_REQ:
- hfcsusb_ph_info(hw);
- ret = 0;
+ ret = hfcsusb_ph_info(hw);
break;
}
@@ -400,8 +404,7 @@ hfc_l1callback(struct dchannel *dch, u_int cmd)
hw->name, __func__, cmd);
return -1;
}
- hfcsusb_ph_info(hw);
- return 0;
+ return hfcsusb_ph_info(hw);
}
static int
@@ -743,8 +746,7 @@ hfcsusb_setup_bch(struct bchannel *bch, int protocol)
handle_led(hw, (bch->nr == 1) ? LED_B1_OFF :
LED_B2_OFF);
}
- hfcsusb_ph_info(hw);
- return 0;
+ return hfcsusb_ph_info(hw);
}
static void
--
2.30.2
From: Peter Wang <[email protected]>
[ Upstream commit c625b80b9d00f3546722cd77527f9697c8c4c911 ]
As per spec, e.g. JESD220E chapter 7.2, while powering off the UFS device,
RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down
sequence after fixing:
Power down:
1. Assert RST_N low
2. Turn-off VCC
3. Turn-off VCCQ/VCCQ2
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Stanley Chu <[email protected]>
Signed-off-by: Peter Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufs-mediatek.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 09d2ac20508b..aace13399a7f 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -824,6 +824,7 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
int err;
+ struct arm_smccc_res res;
if (ufshcd_is_link_hibern8(hba)) {
err = ufs_mtk_link_set_lpm(hba);
@@ -844,6 +845,9 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufs_mtk_vreg_set_lpm(hba, true);
}
+ if (ufshcd_is_link_off(hba))
+ ufs_mtk_device_reset_ctrl(0, res);
+
return 0;
}
--
2.30.2
From: Tom Seewald <[email protected]>
[ Upstream commit dbc97bfd3918ed9268bfc174cae8a7d6b3d51aad ]
The functions send_rx_ctrl_cmd() in both liquidio/lio_main.c and
liquidio/lio_vf_main.c do not check if the call to
octeon_alloc_soft_command() fails and returns a null pointer. Both
functions also return void so errors are not propagated back to the
caller.
Fix these issues by updating both instances of send_rx_ctrl_cmd() to
return an integer rather than void, and have them return -ENOMEM if an
allocation failure occurs. Also update all callers of send_rx_ctrl_cmd()
so that they now check the return value.
Cc: David S. Miller <[email protected]>
Signed-off-by: Tom Seewald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/cavium/liquidio/lio_main.c | 28 +++++++++++++------
.../ethernet/cavium/liquidio/lio_vf_main.c | 27 +++++++++++++-----
2 files changed, 40 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index e4c220f30040..e0d18e917108 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -1153,7 +1153,7 @@ static void octeon_destroy_resources(struct octeon_device *oct)
* @lio: per-network private data
* @start_stop: whether to start or stop
*/
-static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
+static int send_rx_ctrl_cmd(struct lio *lio, int start_stop)
{
struct octeon_soft_command *sc;
union octnet_cmd *ncmd;
@@ -1161,11 +1161,16 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
int retval;
if (oct->props[lio->ifidx].rx_on == start_stop)
- return;
+ return 0;
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE,
16, 0);
+ if (!sc) {
+ netif_info(lio, rx_err, lio->netdev,
+ "Failed to allocate octeon_soft_command struct\n");
+ return -ENOMEM;
+ }
ncmd = (union octnet_cmd *)sc->virtdptr;
@@ -1187,18 +1192,19 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
if (retval == IQ_SEND_FAILED) {
netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n");
octeon_free_soft_command(oct, sc);
- return;
} else {
/* Sleep on a wait queue till the cond flag indicates that the
* response arrived or timed-out.
*/
retval = wait_for_sc_completion_timeout(oct, sc, 0);
if (retval)
- return;
+ return retval;
oct->props[lio->ifidx].rx_on = start_stop;
WRITE_ONCE(sc->caller_is_done, true);
}
+
+ return retval;
}
/**
@@ -1773,6 +1779,7 @@ static int liquidio_open(struct net_device *netdev)
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
struct napi_struct *napi, *n;
+ int ret = 0;
if (oct->props[lio->ifidx].napi_enabled == 0) {
tasklet_disable(&oct_priv->droq_tasklet);
@@ -1808,7 +1815,9 @@ static int liquidio_open(struct net_device *netdev)
netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");
/* tell Octeon to start forwarding packets to host */
- send_rx_ctrl_cmd(lio, 1);
+ ret = send_rx_ctrl_cmd(lio, 1);
+ if (ret)
+ return ret;
/* start periodical statistics fetch */
INIT_DELAYED_WORK(&lio->stats_wk.work, lio_fetch_stats);
@@ -1819,7 +1828,7 @@ static int liquidio_open(struct net_device *netdev)
dev_info(&oct->pci_dev->dev, "%s interface is opened\n",
netdev->name);
- return 0;
+ return ret;
}
/**
@@ -1833,6 +1842,7 @@ static int liquidio_stop(struct net_device *netdev)
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
struct napi_struct *napi, *n;
+ int ret = 0;
ifstate_reset(lio, LIO_IFSTATE_RUNNING);
@@ -1849,7 +1859,9 @@ static int liquidio_stop(struct net_device *netdev)
lio->link_changes++;
/* Tell Octeon that nic interface is down. */
- send_rx_ctrl_cmd(lio, 0);
+ ret = send_rx_ctrl_cmd(lio, 0);
+ if (ret)
+ return ret;
if (OCTEON_CN23XX_PF(oct)) {
if (!oct->msix_on)
@@ -1884,7 +1896,7 @@ static int liquidio_stop(struct net_device *netdev)
dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);
- return 0;
+ return ret;
}
/**
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
index 103440f97bc8..226a7842d2fd 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
@@ -595,7 +595,7 @@ static void octeon_destroy_resources(struct octeon_device *oct)
* @lio: per-network private data
* @start_stop: whether to start or stop
*/
-static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
+static int send_rx_ctrl_cmd(struct lio *lio, int start_stop)
{
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
struct octeon_soft_command *sc;
@@ -603,11 +603,16 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
int retval;
if (oct->props[lio->ifidx].rx_on == start_stop)
- return;
+ return 0;
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE,
16, 0);
+ if (!sc) {
+ netif_info(lio, rx_err, lio->netdev,
+ "Failed to allocate octeon_soft_command struct\n");
+ return -ENOMEM;
+ }
ncmd = (union octnet_cmd *)sc->virtdptr;
@@ -635,11 +640,13 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
*/
retval = wait_for_sc_completion_timeout(oct, sc, 0);
if (retval)
- return;
+ return retval;
oct->props[lio->ifidx].rx_on = start_stop;
WRITE_ONCE(sc->caller_is_done, true);
}
+
+ return retval;
}
/**
@@ -906,6 +913,7 @@ static int liquidio_open(struct net_device *netdev)
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
struct napi_struct *napi, *n;
+ int ret = 0;
if (!oct->props[lio->ifidx].napi_enabled) {
tasklet_disable(&oct_priv->droq_tasklet);
@@ -932,11 +940,13 @@ static int liquidio_open(struct net_device *netdev)
(LIQUIDIO_NDEV_STATS_POLL_TIME_MS));
/* tell Octeon to start forwarding packets to host */
- send_rx_ctrl_cmd(lio, 1);
+ ret = send_rx_ctrl_cmd(lio, 1);
+ if (ret)
+ return ret;
dev_info(&oct->pci_dev->dev, "%s interface is opened\n", netdev->name);
- return 0;
+ return ret;
}
/**
@@ -950,9 +960,12 @@ static int liquidio_stop(struct net_device *netdev)
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
struct napi_struct *napi, *n;
+ int ret = 0;
/* tell Octeon to stop forwarding packets to host */
- send_rx_ctrl_cmd(lio, 0);
+ ret = send_rx_ctrl_cmd(lio, 0);
+ if (ret)
+ return ret;
netif_info(lio, ifdown, lio->netdev, "Stopping interface!\n");
/* Inform that netif carrier is down */
@@ -986,7 +999,7 @@ static int liquidio_stop(struct net_device *netdev)
dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);
- return 0;
+ return ret;
}
/**
--
2.30.2
From: Peter Zijlstra <[email protected]>
[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]
This came up in the discussion of the requirements of qspinlock on an
architecture. OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.
Peter defined it in the mail thread writing:
As near as I can tell this should do. The arch spec only lists
this one instruction and the text makes it sound like a completion
barrier.
This is correct so applying this patch.
Signed-off-by: Peter Zijlstra <[email protected]>
[[email protected]:Turned the mail into a patch]
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/openrisc/include/asm/barrier.h | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 arch/openrisc/include/asm/barrier.h
diff --git a/arch/openrisc/include/asm/barrier.h b/arch/openrisc/include/asm/barrier.h
new file mode 100644
index 000000000000..7538294721be
--- /dev/null
+++ b/arch/openrisc/include/asm/barrier.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#define mb() asm volatile ("l.msync" ::: "memory")
+
+#include <asm-generic/barrier.h>
+
+#endif /* __ASM_BARRIER_H */
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 419b4a142a7ece36cebcd434f8ce2af59ef94b85 ]
The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all possible errors that might happen. Fix up all of this by
only allowing the module to load if all bus registering worked properly.
Cc: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 +---
.../broadcom/brcm80211/brcmfmac/bus.h | 19 ++++++++-
.../broadcom/brcm80211/brcmfmac/core.c | 42 ++++++++-----------
.../broadcom/brcm80211/brcmfmac/pcie.c | 9 +---
.../broadcom/brcm80211/brcmfmac/pcie.h | 5 ---
.../broadcom/brcm80211/brcmfmac/usb.c | 4 +-
6 files changed, 41 insertions(+), 46 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index f9ebb98b0e3c..b6d0bc73923f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -1217,13 +1217,9 @@ static struct sdio_driver brcmf_sdmmc_driver = {
},
};
-void brcmf_sdio_register(void)
+int brcmf_sdio_register(void)
{
- int ret;
-
- ret = sdio_register_driver(&brcmf_sdmmc_driver);
- if (ret)
- brcmf_err("sdio_register_driver failed: %d\n", ret);
+ return sdio_register_driver(&brcmf_sdmmc_driver);
}
void brcmf_sdio_exit(void)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
index 08f9d47f2e5c..3f5da3bb6aa5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -275,11 +275,26 @@ void brcmf_bus_add_txhdrlen(struct device *dev, uint len);
#ifdef CONFIG_BRCMFMAC_SDIO
void brcmf_sdio_exit(void);
-void brcmf_sdio_register(void);
+int brcmf_sdio_register(void);
+#else
+static inline void brcmf_sdio_exit(void) { }
+static inline int brcmf_sdio_register(void) { return 0; }
#endif
+
#ifdef CONFIG_BRCMFMAC_USB
void brcmf_usb_exit(void);
-void brcmf_usb_register(void);
+int brcmf_usb_register(void);
+#else
+static inline void brcmf_usb_exit(void) { }
+static inline int brcmf_usb_register(void) { return 0; }
+#endif
+
+#ifdef CONFIG_BRCMFMAC_PCIE
+void brcmf_pcie_exit(void);
+int brcmf_pcie_register(void);
+#else
+static inline void brcmf_pcie_exit(void) { }
+static inline int brcmf_pcie_register(void) { return 0; }
#endif
#endif /* BRCMFMAC_BUS_H */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 3dd28f5fef19..61039538a15b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -1518,40 +1518,34 @@ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state)
}
}
-static void brcmf_driver_register(struct work_struct *work)
-{
-#ifdef CONFIG_BRCMFMAC_SDIO
- brcmf_sdio_register();
-#endif
-#ifdef CONFIG_BRCMFMAC_USB
- brcmf_usb_register();
-#endif
-#ifdef CONFIG_BRCMFMAC_PCIE
- brcmf_pcie_register();
-#endif
-}
-static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
-
int __init brcmf_core_init(void)
{
- if (!schedule_work(&brcmf_driver_work))
- return -EBUSY;
+ int err;
+ err = brcmf_sdio_register();
+ if (err)
+ return err;
+
+ err = brcmf_usb_register();
+ if (err)
+ goto error_usb_register;
+
+ err = brcmf_pcie_register();
+ if (err)
+ goto error_pcie_register;
return 0;
+
+error_pcie_register:
+ brcmf_usb_exit();
+error_usb_register:
+ brcmf_sdio_exit();
+ return err;
}
void __exit brcmf_core_exit(void)
{
- cancel_work_sync(&brcmf_driver_work);
-
-#ifdef CONFIG_BRCMFMAC_SDIO
brcmf_sdio_exit();
-#endif
-#ifdef CONFIG_BRCMFMAC_USB
brcmf_usb_exit();
-#endif
-#ifdef CONFIG_BRCMFMAC_PCIE
brcmf_pcie_exit();
-#endif
}
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index d8db0dbcfe09..603aff421e38 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -2138,15 +2138,10 @@ static struct pci_driver brcmf_pciedrvr = {
};
-void brcmf_pcie_register(void)
+int brcmf_pcie_register(void)
{
- int err;
-
brcmf_dbg(PCIE, "Enter\n");
- err = pci_register_driver(&brcmf_pciedrvr);
- if (err)
- brcmf_err(NULL, "PCIE driver registration failed, err=%d\n",
- err);
+ return pci_register_driver(&brcmf_pciedrvr);
}
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h
index d026401d2001..8e6c227e8315 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h
@@ -11,9 +11,4 @@ struct brcmf_pciedev {
struct brcmf_pciedev_info *devinfo;
};
-
-void brcmf_pcie_exit(void);
-void brcmf_pcie_register(void);
-
-
#endif /* BRCMFMAC_PCIE_H */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index d2a803fc8ac6..9fb68c2dc7e3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1584,8 +1584,8 @@ void brcmf_usb_exit(void)
usb_deregister(&brcmf_usbdrvr);
}
-void brcmf_usb_register(void)
+int brcmf_usb_register(void)
{
brcmf_dbg(USB, "Enter\n");
- usb_register(&brcmf_usbdrvr);
+ return usb_register(&brcmf_usbdrvr);
}
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit dacb408ca6f0e34df22b40d8dd5fae7f8e777d84 ]
If m5602_write_sensor() or m5602_write_bridge() fail, do not continue to
initialize the device but return the error to the calling funtion.
Cc: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/gspca/m5602/m5602_po1030.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c
index 7bdbb8065146..8fd99ceee4b6 100644
--- a/drivers/media/usb/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c
@@ -155,6 +155,7 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = {
int po1030_probe(struct sd *sd)
{
u8 dev_id_h = 0, i;
+ int err;
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
if (force_sensor) {
@@ -173,10 +174,13 @@ int po1030_probe(struct sd *sd)
for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
u8 data = preinit_po1030[i][2];
if (preinit_po1030[i][0] == SENSOR)
- m5602_write_sensor(sd,
- preinit_po1030[i][1], &data, 1);
+ err = m5602_write_sensor(sd, preinit_po1030[i][1],
+ &data, 1);
else
- m5602_write_bridge(sd, preinit_po1030[i][1], data);
+ err = m5602_write_bridge(sd, preinit_po1030[i][1],
+ data);
+ if (err < 0)
+ return err;
}
if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
--
2.30.2
From: Ajish Koshy <[email protected]>
[ Upstream commit d1acd81bd6eb685aa9fef25624fb36d297f6404e ]
When driver is loaded after rmmod some drives are not showing up during
discovery.
SATA drives are directly attached to the controller connected phys. During
device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out
during revalidation. This will trigger abort from host side and controller
successfully aborts the command and returns success. Post this successful
abort response ATA library decides to mark the disk as NODEV.
To overcome this, inside pm8001_scan_start() after phy_start() call, add get
start response and wait for few milliseconds to trigger next phy start.
This millisecond delay will give sufficient time for the controller state
machine to accept next phy start.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ajish Koshy <[email protected]>
Signed-off-by: Viswas G <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 10 ++++++----
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.c | 7 ++++++-
drivers/scsi/pm8001/pm80xx_hwi.c | 12 ++++++------
4 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 355d1c5f2194..2114d2dd3501 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3703,11 +3703,13 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
case HW_EVENT_PHY_START_STATUS:
pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS status = %x\n",
status);
- if (status == 0) {
+ if (status == 0)
phy->phy_state = 1;
- if (pm8001_ha->flags == PM8001F_RUN_TIME &&
- phy->enable_completion != NULL)
- complete(phy->enable_completion);
+
+ if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+ phy->enable_completion != NULL) {
+ complete(phy->enable_completion);
+ phy->enable_completion = NULL;
}
break;
case HW_EVENT_SAS_PHY_UP:
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 7657d68e12d5..0c0c886c7371 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1139,8 +1139,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
goto err_out_shost;
}
list_add_tail(&pm8001_ha->list, &hba_list);
- scsi_scan_host(pm8001_ha->shost);
pm8001_ha->flags = PM8001F_RUN_TIME;
+ scsi_scan_host(pm8001_ha->shost);
return 0;
err_out_shost:
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 474468df2a78..39de9a9360d3 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -264,12 +264,17 @@ void pm8001_scan_start(struct Scsi_Host *shost)
int i;
struct pm8001_hba_info *pm8001_ha;
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ DECLARE_COMPLETION_ONSTACK(completion);
pm8001_ha = sha->lldd_ha;
/* SAS_RE_INITIALIZATION not available in SPCv/ve */
if (pm8001_ha->chip_id == chip_8001)
PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
- for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
+ for (i = 0; i < pm8001_ha->chip->n_phy; ++i) {
+ pm8001_ha->phy[i].enable_completion = &completion;
PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+ wait_for_completion(&completion);
+ msleep(300);
+ }
}
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 27b354860a16..a203a4fc2674 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -3432,13 +3432,13 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_dbg(pm8001_ha, INIT,
"phy start resp status:0x%x, phyid:0x%x\n",
status, phy_id);
- if (status == 0) {
+ if (status == 0)
phy->phy_state = PHY_LINK_DOWN;
- if (pm8001_ha->flags == PM8001F_RUN_TIME &&
- phy->enable_completion != NULL) {
- complete(phy->enable_completion);
- phy->enable_completion = NULL;
- }
+
+ if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+ phy->enable_completion != NULL) {
+ complete(phy->enable_completion);
+ phy->enable_completion = NULL;
}
return 0;
--
2.30.2
From: Matt Wang <[email protected]>
[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ]
Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems. With this commit,
64-bit kernel will enumerate 8*15 non-existing disks. This is caused
by the broken CCB structure. The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB. This leads to incorrect response to INQUIRY
commands during enumeration.
Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Khalid Aziz <[email protected]>
Signed-off-by: Matt Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/BusLogic.c | 6 +++---
drivers/scsi/BusLogic.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index ccb061ab0a0a..7231de2767a9 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -3078,11 +3078,11 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
ccb->opcode = BLOGIC_INITIATOR_CCB_SG;
ccb->datalen = count * sizeof(struct blogic_sg_seg);
if (blogic_multimaster_type(adapter))
- ccb->data = (void *)((unsigned int) ccb->dma_handle +
+ ccb->data = (unsigned int) ccb->dma_handle +
((unsigned long) &ccb->sglist -
- (unsigned long) ccb));
+ (unsigned long) ccb);
else
- ccb->data = ccb->sglist;
+ ccb->data = virt_to_32bit_virt(ccb->sglist);
scsi_for_each_sg(command, sg, count, i) {
ccb->sglist[i].segbytes = sg_dma_len(sg);
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index 6182cc8a0344..e081ad47d1cf 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -814,7 +814,7 @@ struct blogic_ccb {
unsigned char cdblen; /* Byte 2 */
unsigned char sense_datalen; /* Byte 3 */
u32 datalen; /* Bytes 4-7 */
- void *data; /* Bytes 8-11 */
+ u32 data; /* Bytes 8-11 */
unsigned char:8; /* Byte 12 */
unsigned char:8; /* Byte 13 */
enum blogic_adapter_status adapter_status; /* Byte 14 */
--
2.30.2
From: Shyam Sundar S K <[email protected]>
[ Upstream commit f048630bdd55eb5379ef35f971639fe52fabe499 ]
Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/hp-wireless.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/hp-wireless.c b/drivers/platform/x86/hp-wireless.c
index 12c31fd5d5ae..0753ef18e721 100644
--- a/drivers/platform/x86/hp-wireless.c
+++ b/drivers/platform/x86/hp-wireless.c
@@ -17,12 +17,14 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alex Hung");
MODULE_ALIAS("acpi*:HPQ6001:*");
MODULE_ALIAS("acpi*:WSTADEF:*");
+MODULE_ALIAS("acpi*:AMDI0051:*");
static struct input_dev *hpwl_input_dev;
static const struct acpi_device_id hpwl_ids[] = {
{"HPQ6001", 0},
{"WSTADEF", 0},
+ {"AMDI0051", 0},
{"", 0},
};
--
2.30.2
From: Filipe Manana <[email protected]>
[ Upstream commit 6416954ca75baed71640bf3828625bf165fb9b5e ]
When cloning an inline extent there are a few cases, such as when we have
an implicit hole at file offset 0, where we start a transaction while
holding a read lock on a leaf. Starting the transaction results in a call
to sb_start_intwrite(), which results in doing a read lock on a percpu
semaphore. Lockdep doesn't like this and complains about it:
[46.580704] ======================================================
[46.580752] WARNING: possible circular locking dependency detected
[46.580799] 5.13.0-rc1 #28 Not tainted
[46.580832] ------------------------------------------------------
[46.580877] cloner/3835 is trying to acquire lock:
[46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0
[46.581167]
[46.581167] but task is already holding lock:
[46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0
[46.581293]
[46.581293] which lock already depends on the new lock.
[46.581293]
[46.581351]
[46.581351] the existing dependency chain (in reverse order) is:
[46.581410]
[46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}:
[46.581464] down_read_nested+0x68/0x200
[46.581536] __btrfs_tree_read_lock+0x70/0x1d0
[46.581577] btrfs_read_lock_root_node+0x88/0x200
[46.581623] btrfs_search_slot+0x298/0xb70
[46.581665] btrfs_set_inode_index+0xfc/0x260
[46.581708] btrfs_new_inode+0x26c/0x950
[46.581749] btrfs_create+0xf4/0x2b0
[46.581782] lookup_open.isra.57+0x55c/0x6a0
[46.581855] path_openat+0x418/0xd20
[46.581888] do_filp_open+0x9c/0x130
[46.581920] do_sys_openat2+0x2ec/0x430
[46.581961] do_sys_open+0x90/0xc0
[46.581993] system_call_exception+0x3d4/0x410
[46.582037] system_call_common+0xec/0x278
[46.582078]
[46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}:
[46.582135] __lock_acquire+0x1e90/0x2c50
[46.582176] lock_acquire+0x2b4/0x5b0
[46.582263] start_transaction+0x3cc/0x950
[46.582308] clone_copy_inline_extent+0xe4/0x5a0
[46.582353] btrfs_clone+0x5fc/0x880
[46.582388] btrfs_clone_files+0xd8/0x1c0
[46.582434] btrfs_remap_file_range+0x3d8/0x590
[46.582481] do_clone_file_range+0x10c/0x270
[46.582558] vfs_clone_file_range+0x1b0/0x310
[46.582605] ioctl_file_clone+0x90/0x130
[46.582651] do_vfs_ioctl+0x874/0x1ac0
[46.582697] sys_ioctl+0x6c/0x120
[46.582733] system_call_exception+0x3d4/0x410
[46.582777] system_call_common+0xec/0x278
[46.582822]
[46.582822] other info that might help us debug this:
[46.582822]
[46.582888] Possible unsafe locking scenario:
[46.582888]
[46.582942] CPU0 CPU1
[46.582984] ---- ----
[46.583028] lock(btrfs-tree-00);
[46.583062] lock(sb_internal#2);
[46.583119] lock(btrfs-tree-00);
[46.583174] lock(sb_internal#2);
[46.583212]
[46.583212] *** DEADLOCK ***
[46.583212]
[46.583266] 6 locks held by cloner/3835:
[46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130
[46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0
[46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0
[46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590
[46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590
[46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0
[46.583828]
[46.583828] stack backtrace:
[46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28
[46.583931] Call Trace:
[46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable)
[46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400
[46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190
[46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50
[46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0
[46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950
[46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0
[46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880
[46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0
[46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590
[46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270
[46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310
[46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130
[46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0
[46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120
[46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410
[46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278
[46.585114] --- interrupt: c00 at 0x7ffff7e22990
[46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000
[46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1)
[46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000
[46.585374] IRQMASK: 0
[46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004
[46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000
[46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000
[46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000
[46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000
[46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004
[46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f
[46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990
[46.585964] LR [00000001000010ec] 0x1000010ec
[46.586010] --- interrupt: c00
This should be a false positive, as both locks are acquired in read mode.
Nevertheless, we don't need to hold a leaf locked when we start the
transaction, so just release the leaf (path) before starting it.
Reported-by: Ritesh Harjani <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/reflink.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/btrfs/reflink.c b/fs/btrfs/reflink.c
index c4f87df53283..eeb66e797e0b 100644
--- a/fs/btrfs/reflink.c
+++ b/fs/btrfs/reflink.c
@@ -281,6 +281,11 @@ copy_inline_extent:
ret = btrfs_inode_set_file_extent_range(BTRFS_I(dst), 0, aligned_end);
out:
if (!ret && !trans) {
+ /*
+ * Release path before starting a new transaction so we don't
+ * hold locks that would confuse lockdep.
+ */
+ btrfs_release_path(path);
/*
* No transaction here means we copied the inline extent into a
* page of the destination inode.
--
2.30.2
From: Josef Bacik <[email protected]>
[ Upstream commit 91df99a6eb50d5a1bc70fff4a09a0b7ae6aab96d ]
While doing error injection testing I got the following panic
kernel BUG at fs/btrfs/tree-log.c:1862!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:link_to_fixup_dir+0xd5/0xe0
RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216
RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0
RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000
RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001
R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800
R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065
FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0
Call Trace:
replay_one_buffer+0x409/0x470
? btree_read_extent_buffer_pages+0xd0/0x110
walk_up_log_tree+0x157/0x1e0
walk_log_tree+0xa6/0x1d0
btrfs_recover_log_trees+0x1da/0x360
? replay_one_extent+0x7b0/0x7b0
open_ctree+0x1486/0x1720
btrfs_mount_root.cold+0x12/0xea
? __kmalloc_track_caller+0x12f/0x240
legacy_get_tree+0x24/0x40
vfs_get_tree+0x22/0xb0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x380
? vfs_parse_fs_string+0x4d/0x90
legacy_get_tree+0x24/0x40
vfs_get_tree+0x22/0xb0
path_mount+0x433/0xa10
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
We can get -EIO or any number of legitimate errors from
btrfs_search_slot(), panicing here is not the appropriate response. The
error path for this code handles errors properly, simply return the
error.
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/tree-log.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 8bc3e2f25e7d..9a0cfa0e124d 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1823,8 +1823,6 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans,
ret = btrfs_update_inode(trans, root, inode);
} else if (ret == -EEXIST) {
ret = 0;
- } else {
- BUG(); /* Logic Error */
}
iput(inode);
--
2.30.2
From: Steve French <[email protected]>
[ Upstream commit c0d46717b95735b0eacfddbcca9df37a49de9c7a ]
See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to
0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting
it incorrectly).
Signed-off-by: Steve French <[email protected]>
Reported-by: Stefan Metzmacher <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/smb2pdu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 0ce92d958fd6..ab509965656e 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -3898,10 +3898,10 @@ smb2_new_read_req(void **buf, unsigned int *total_len,
* Related requests use info from previous read request
* in chain.
*/
- shdr->SessionId = 0xFFFFFFFF;
+ shdr->SessionId = 0xFFFFFFFFFFFFFFFF;
shdr->TreeId = 0xFFFFFFFF;
- req->PersistentFileId = 0xFFFFFFFF;
- req->VolatileFileId = 0xFFFFFFFF;
+ req->PersistentFileId = 0xFFFFFFFFFFFFFFFF;
+ req->VolatileFileId = 0xFFFFFFFFFFFFFFFF;
}
}
if (remaining_bytes > io_parms->length)
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit bc1eca606d8084465e6f89fd646cc71defbad490 ]
The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.
Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/intel_punit_ipc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c
index 05cced59e251..f58b8543f6ac 100644
--- a/drivers/platform/x86/intel_punit_ipc.c
+++ b/drivers/platform/x86/intel_punit_ipc.c
@@ -312,6 +312,7 @@ static const struct acpi_device_id punit_ipc_acpi_ids[] = {
{ "INT34D4", 0 },
{ }
};
+MODULE_DEVICE_TABLE(acpi, punit_ipc_acpi_ids);
static struct platform_driver intel_punit_ipc_driver = {
.probe = intel_punit_ipc_probe,
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 43ed0fcf613a87dd0221ec72d1ade4d6544f2ffc ]
This reverts commit a474b3f0428d6b02a538aa10b3c3b722751cb382.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original change is NOT correct, as it does not correctly unwind from
the resources that was allocated before the call to
platform_driver_register().
Cc: Aditya Pakki <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Acked-By: Sinan Kaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/qcom/hidma_mgmt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index 806ca02c52d7..fe87b01f7a4e 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -418,8 +418,9 @@ static int __init hidma_mgmt_init(void)
hidma_mgmt_of_populate_channels(child);
}
#endif
- return platform_driver_register(&hidma_mgmt_driver);
+ platform_driver_register(&hidma_mgmt_driver);
+ return 0;
}
module_init(hidma_mgmt_init);
MODULE_LICENSE("GPL v2");
--
2.30.2
From: Teava Radu <[email protected]>
[ Upstream commit 39a6172ea88b3117353ae16cbb0a53cd80a9340a ]
Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet.
Tested on 5.11 hirsute.
Note: it's hw clone to Wintron surftab 7.
Signed-off-by: Teava Radu <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/touchscreen_dmi.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index c4de932302d6..e1455f1d2472 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -1043,6 +1043,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
},
},
+ {
+ /* Mediacom WinPad 7.0 W700 (same hw as Wintron surftab 7") */
+ .driver_data = (void *)&trekstor_surftab_wintron70_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "WinPad 7 W10 - WPW700"),
+ },
+ },
{
/* Mediacom Flexbook Edge 11 (same hw as TS Primebook C11) */
.driver_data = (void *)&trekstor_primebook_c11_data,
--
2.30.2
From: Boris Burkov <[email protected]>
[ Upstream commit 15c7745c9a0078edad1f7df5a6bb7b80bc8cca23 ]
`xfs_io -c 'fiemap <off> <len>' <file>`
can give surprising results on btrfs that differ from xfs.
btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.
Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.
Some cases which all yield the same fiemap in xfs, but not btrfs:
dd if=/dev/zero of=$f bs=4k count=1
sudo xfs_io -c 'fiemap 0 1024' $f
0: [0..7]: 26624..26631
sudo xfs_io -c 'fiemap 2048 1024' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 2048 4096' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 3584 512' $f
0: [7..7]: 26631..26631
sudo xfs_io -c 'fiemap 4091 5' $f
0: [7..6]: 26631..26630
I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.
after the fix, all the above commands give:
0: [0..7]: 26624..26631
The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Boris Burkov <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/extent_io.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 30cf917a58e9..81e98a457130 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4662,7 +4662,7 @@ int extent_fiemap(struct btrfs_inode *inode, struct fiemap_extent_info *fieinfo,
u64 start, u64 len)
{
int ret = 0;
- u64 off = start;
+ u64 off;
u64 max = start + len;
u32 flags = 0;
u32 found_type;
@@ -4698,6 +4698,11 @@ int extent_fiemap(struct btrfs_inode *inode, struct fiemap_extent_info *fieinfo,
goto out_free_ulist;
}
+ /*
+ * We can't initialize that to 'start' as this could miss extents due
+ * to extent item merging
+ */
+ off = 0;
start = round_down(start, btrfs_inode_sectorsize(inode));
len = round_up(max, btrfs_inode_sectorsize(inode)) - start;
--
2.30.2
From: Jingwen Chen <[email protected]>
[ Upstream commit fa7e6abc75f3d491bc561734312d065dc9dc2a77 ]
[Why]
the gem object rfb->base.obj[0] is get according to num_planes
in amdgpufb_create, but is not put according to num_planes
[How]
put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes
Signed-off-by: Jingwen Chen <[email protected]>
Acked-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
index 1ea8af48ae2f..43f29ee0e3b0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
@@ -289,10 +289,13 @@ out:
static int amdgpu_fbdev_destroy(struct drm_device *dev, struct amdgpu_fbdev *rfbdev)
{
struct amdgpu_framebuffer *rfb = &rfbdev->rfb;
+ int i;
drm_fb_helper_unregister_fbi(&rfbdev->helper);
if (rfb->base.obj[0]) {
+ for (i = 0; i < rfb->base.format->num_planes; i++)
+ drm_gem_object_put(rfb->base.obj[0]);
amdgpufb_destroy_pinned_object(rfb->base.obj[0]);
rfb->base.obj[0] = NULL;
drm_framebuffer_unregister_private(&rfb->base);
--
2.30.2
From: xinhui pan <[email protected]>
[ Upstream commit 1e5c37385097c35911b0f8a0c67ffd10ee1af9a2 ]
looks like we forget to set ttm->sg to NULL.
Hit panic below
[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751] sg_free_table+0x17/0x20
[ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm]
[ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm]
[ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu]
[ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu]
[ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
[ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu]
Signed-off-by: xinhui pan <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 532250c2b19e..5207ad654f18 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -1381,6 +1381,7 @@ static void amdgpu_ttm_tt_unpopulate(struct ttm_bo_device *bdev, struct ttm_tt *
if (gtt && gtt->userptr) {
amdgpu_ttm_tt_set_user_pages(ttm, NULL);
kfree(ttm->sg);
+ ttm->sg = NULL;
ttm->page_flags &= ~TTM_PAGE_FLAG_SG;
return;
}
--
2.30.2
From: Chris Park <[email protected]>
[ Upstream commit 080039273b126eeb0185a61c045893a25dbc046e ]
[Why]
Active DP dongles return no EDID when dongle
is connected, but VGA display is taken out.
Current driver behavior does not remove the
active display when this happens, and this is
a gap between dongle DTP and dongle behavior.
[How]
For active DP dongles and non-DP scenario,
disconnect sink on detection when no EDID
is read due to timeout.
Signed-off-by: Chris Park <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Stylon Wang <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index f0039599e02f..62778ccea055 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1049,6 +1049,24 @@ static bool dc_link_detect_helper(struct dc_link *link,
dc_is_dvi_signal(link->connector_signal)) {
if (prev_sink)
dc_sink_release(prev_sink);
+ link_disconnect_sink(link);
+
+ return false;
+ }
+ /*
+ * Abort detection for DP connectors if we have
+ * no EDID and connector is active converter
+ * as there are no display downstream
+ *
+ */
+ if (dc_is_dp_sst_signal(link->connector_signal) &&
+ (link->dpcd_caps.dongle_type ==
+ DISPLAY_DONGLE_DP_VGA_CONVERTER ||
+ link->dpcd_caps.dongle_type ==
+ DISPLAY_DONGLE_DP_DVI_CONVERTER)) {
+ if (prev_sink)
+ dc_sink_release(prev_sink);
+ link_disconnect_sink(link);
return false;
}
--
2.30.2
From: Gulam Mohamed <[email protected]>
[ Upstream commit bc6a385132601c29a6da1dbf8148c0d3c9ad36dc ]
When BLKRRPART is called concurrently with del_gendisk, the partitions
rescan can create a stale partition that will never be be cleaned up.
Fix this by checking the the disk is up before rescanning partitions
while under bd_mutex.
Signed-off-by: Gulam Mohamed <[email protected]>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/block_dev.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index cacea6bafc22..29f020c4b2d0 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1408,6 +1408,9 @@ int bdev_disk_changed(struct block_device *bdev, bool invalidate)
lockdep_assert_held(&bdev->bd_mutex);
+ if (!(disk->flags & GENHD_FL_UP))
+ return -ENXIO;
+
rescan:
ret = blk_drop_partitions(bdev);
if (ret)
--
2.30.2
From: Christian König <[email protected]>
[ Upstream commit a2b4785f01280a4291edb9fda69032fc2e4bfd3f ]
This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.
The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.
v2: squash in unused variable fix (Alex)
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c | 2 --
drivers/gpu/drm/amd/amdgpu/jpeg_v3_0.c | 2 --
drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 5 -----
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 8 +-------
4 files changed, 1 insertion(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c
index 845306f63cdb..63b350182389 100644
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v2_5.c
@@ -198,8 +198,6 @@ static int jpeg_v2_5_hw_fini(void *handle)
if (adev->jpeg.cur_state != AMD_PG_STATE_GATE &&
RREG32_SOC15(JPEG, i, mmUVD_JRBC_STATUS))
jpeg_v2_5_set_powergating_state(adev, AMD_PG_STATE_GATE);
-
- ring->sched.ready = false;
}
return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v3_0.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v3_0.c
index 3a0dff53654d..9259e35f0f55 100644
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v3_0.c
@@ -166,8 +166,6 @@ static int jpeg_v3_0_hw_fini(void *handle)
RREG32_SOC15(JPEG, 0, mmUVD_JRBC_STATUS))
jpeg_v3_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
- ring->sched.ready = false;
-
return 0;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
index 2a485052e3ab..1bd330d43147 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c
@@ -476,11 +476,6 @@ static void sdma_v5_2_gfx_stop(struct amdgpu_device *adev)
ib_cntl = REG_SET_FIELD(ib_cntl, SDMA0_GFX_IB_CNTL, IB_ENABLE, 0);
WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_GFX_IB_CNTL), ib_cntl);
}
-
- sdma0->sched.ready = false;
- sdma1->sched.ready = false;
- sdma2->sched.ready = false;
- sdma3->sched.ready = false;
}
/**
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
index b5f8f3d731cb..700621ddc02e 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
@@ -346,7 +346,7 @@ static int vcn_v3_0_hw_fini(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
struct amdgpu_ring *ring;
- int i, j;
+ int i;
for (i = 0; i < adev->vcn.num_vcn_inst; ++i) {
if (adev->vcn.harvest_config & (1 << i))
@@ -361,12 +361,6 @@ static int vcn_v3_0_hw_fini(void *handle)
vcn_v3_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
}
}
- ring->sched.ready = false;
-
- for (j = 0; j < adev->vcn.num_enc_rings; ++j) {
- ring = &adev->vcn.inst[i].ring_enc[j];
- ring->sched.ready = false;
- }
}
return 0;
--
2.30.2
From: Rikard Falkeborn <[email protected]>
[ Upstream commit f747e6667ebb2ffb8133486c9cd19800d72b0d98 ]
GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.
However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].
Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.
Link: https://lore.kernel.org/lkml/[email protected] [0]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1]
Link: https://lore.kernel.org/lkml/[email protected] [2]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rikard Falkeborn <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bits.h | 2 +-
include/linux/const.h | 8 ++++++++
include/linux/minmax.h | 10 ++--------
tools/include/linux/bits.h | 2 +-
tools/include/linux/const.h | 8 ++++++++
5 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/include/linux/bits.h b/include/linux/bits.h
index 7f475d59a097..87d112650dfb 100644
--- a/include/linux/bits.h
+++ b/include/linux/bits.h
@@ -22,7 +22,7 @@
#include <linux/build_bug.h>
#define GENMASK_INPUT_CHECK(h, l) \
(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
- __builtin_constant_p((l) > (h)), (l) > (h), 0)))
+ __is_constexpr((l) > (h)), (l) > (h), 0)))
#else
/*
* BUILD_BUG_ON_ZERO is not available in h files included from asm files,
diff --git a/include/linux/const.h b/include/linux/const.h
index 81b8aae5a855..435ddd72d2c4 100644
--- a/include/linux/const.h
+++ b/include/linux/const.h
@@ -3,4 +3,12 @@
#include <vdso/const.h>
+/*
+ * This returns a constant expression while determining if an argument is
+ * a constant expression, most importantly without evaluating the argument.
+ * Glory to Martin Uecker <[email protected]>
+ */
+#define __is_constexpr(x) \
+ (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8)))
+
#endif /* _LINUX_CONST_H */
diff --git a/include/linux/minmax.h b/include/linux/minmax.h
index c0f57b0c64d9..5433c08fcc68 100644
--- a/include/linux/minmax.h
+++ b/include/linux/minmax.h
@@ -2,6 +2,8 @@
#ifndef _LINUX_MINMAX_H
#define _LINUX_MINMAX_H
+#include <linux/const.h>
+
/*
* min()/max()/clamp() macros must accomplish three things:
*
@@ -17,14 +19,6 @@
#define __typecheck(x, y) \
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
-/*
- * This returns a constant expression while determining if an argument is
- * a constant expression, most importantly without evaluating the argument.
- * Glory to Martin Uecker <[email protected]>
- */
-#define __is_constexpr(x) \
- (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8)))
-
#define __no_side_effects(x, y) \
(__is_constexpr(x) && __is_constexpr(y))
diff --git a/tools/include/linux/bits.h b/tools/include/linux/bits.h
index 7f475d59a097..87d112650dfb 100644
--- a/tools/include/linux/bits.h
+++ b/tools/include/linux/bits.h
@@ -22,7 +22,7 @@
#include <linux/build_bug.h>
#define GENMASK_INPUT_CHECK(h, l) \
(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
- __builtin_constant_p((l) > (h)), (l) > (h), 0)))
+ __is_constexpr((l) > (h)), (l) > (h), 0)))
#else
/*
* BUILD_BUG_ON_ZERO is not available in h files included from asm files,
diff --git a/tools/include/linux/const.h b/tools/include/linux/const.h
index 81b8aae5a855..435ddd72d2c4 100644
--- a/tools/include/linux/const.h
+++ b/tools/include/linux/const.h
@@ -3,4 +3,12 @@
#include <vdso/const.h>
+/*
+ * This returns a constant expression while determining if an argument is
+ * a constant expression, most importantly without evaluating the argument.
+ * Glory to Martin Uecker <[email protected]>
+ */
+#define __is_constexpr(x) \
+ (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8)))
+
#endif /* _LINUX_CONST_H */
--
2.30.2
From: Lang Yu <[email protected]>
[ Upstream commit 9c2876d56f1ce9b6b2072f1446fb1e8d1532cb3d ]
When amdgpu_ib_ring_tests failed, the reset logic called
amdgpu_device_ip_suspend twice, then deadlock occurred.
Deadlock log:
[ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[ 806.290952] [drm] free PSP TMR buffer
[ 806.319406] ============================================
[ 806.320315] WARNING: possible recursive locking detected
[ 806.321225] 5.11.0-custom #1 Tainted: G W OEL
[ 806.322135] --------------------------------------------
[ 806.323043] cat/2593 is trying to acquire lock:
[ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.325668]
but task is already holding lock:
[ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.328430]
other info that might help us debug this:
[ 806.329539] Possible unsafe locking scenario:
[ 806.330549] CPU0
[ 806.330983] ----
[ 806.331416] lock(&adev->dm.dc_lock);
[ 806.332086] lock(&adev->dm.dc_lock);
[ 806.332738]
*** DEADLOCK ***
[ 806.333747] May be due to missing lock nesting notation
[ 806.334899] 3 locks held by cat/2593:
[ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110
[ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu]
[ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.340869]
stack backtrace:
[ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1
[ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020
[ 806.344413] Call Trace:
[ 806.344849] dump_stack+0x93/0xbd
[ 806.345435] __lock_acquire.cold+0x18a/0x2cf
[ 806.346179] lock_acquire+0xca/0x390
[ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.347813] __mutex_lock+0x9b/0x930
[ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu]
[ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50
[ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80
[ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80
[ 806.354064] mutex_lock_nested+0x1b/0x20
[ 806.354747] ? mutex_lock_nested+0x1b/0x20
[ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu]
[ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu]
[ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu]
[ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu]
[ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu]
Signed-off-by: Lang Yu <[email protected]>
Acked-by: Christian KÃnig <[email protected]>
Reviewed-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 7f2689d4b86d..87c7c45f1bb7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -4368,7 +4368,6 @@ out:
r = amdgpu_ib_ring_tests(tmp_adev);
if (r) {
dev_err(tmp_adev->dev, "ib ring test failed (%d).\n", r);
- r = amdgpu_device_ip_suspend(tmp_adev);
need_full_reset = true;
r = -EAGAIN;
goto end;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 46651077765c80a0d6f87f3469129a72e49ce91b ]
This reverts commit 434256833d8eb988cb7f3b8a41699e2fe48d9332.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit was incorrect, the error needs to be propagated back
to the caller AND if the second group call fails, the first needs to be
removed. There are much better ways to solve this, the driver should
NOT be calling sysfs_create_group() on its own as it is racing userspace
and loosing.
Cc: Kangjie Lu <[email protected]>
Cc: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas/mesh.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c
index f5b78257d551..c611e6668b21 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.c
+++ b/drivers/net/wireless/marvell/libertas/mesh.c
@@ -805,12 +805,7 @@ static void lbs_persist_config_init(struct net_device *dev)
{
int ret;
ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
- if (ret)
- pr_err("failed to create boot_opts_group.\n");
-
ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
- if (ret)
- pr_err("failed to create mesh_ie_group.\n");
}
static void lbs_persist_config_remove(struct net_device *dev)
--
2.30.2
From: Phillip Potter <[email protected]>
[ Upstream commit 4df2a8b0ad634d98a67e540a4e18a60f943e7d9f ]
Place a comment in hidma_mgmt_init explaining why success must
currently be assumed, due to the cleanup issue that would need to
be considered were this module ever to be unloadable or were this
platform_driver_register call ever to fail.
Acked-By: Vinod Koul <[email protected]>
Acked-By: Sinan Kaya <[email protected]>
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/qcom/hidma_mgmt.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index fe87b01f7a4e..62026607f3f8 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -418,6 +418,20 @@ static int __init hidma_mgmt_init(void)
hidma_mgmt_of_populate_channels(child);
}
#endif
+ /*
+ * We do not check for return value here, as it is assumed that
+ * platform_driver_register must not fail. The reason for this is that
+ * the (potential) hidma_mgmt_of_populate_channels calls above are not
+ * cleaned up if it does fail, and to do this work is quite
+ * complicated. In particular, various calls of of_address_to_resource,
+ * of_irq_to_resource, platform_device_register_full, of_dma_configure,
+ * and of_msi_configure which then call other functions and so on, must
+ * be cleaned up - this is not a trivial exercise.
+ *
+ * Currently, this module is not intended to be unloaded, and there is
+ * no module_exit function defined which does the needed cleanup. For
+ * this reason, we have to assume success here.
+ */
platform_driver_register(&hidma_mgmt_driver);
return 0;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 7e79b38fe9a403b065ac5915465f620a8fb3de84 ]
The libertas driver was trying to register sysfs groups "by hand" which
causes them to be created _after_ the device is initialized and
announced to userspace, which causes races and can prevent userspace
tools from seeing the sysfs files correctly.
Fix this up by using the built-in sysfs_groups pointers in struct
net_device which were created for this very reason, fixing the race
condition, and properly allowing for any error that might have occured
to be handled properly.
Cc: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas/mesh.c | 28 +++-----------------
1 file changed, 4 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c
index c611e6668b21..c68814841583 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.c
+++ b/drivers/net/wireless/marvell/libertas/mesh.c
@@ -801,19 +801,6 @@ static const struct attribute_group mesh_ie_group = {
.attrs = mesh_ie_attrs,
};
-static void lbs_persist_config_init(struct net_device *dev)
-{
- int ret;
- ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
- ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
-static void lbs_persist_config_remove(struct net_device *dev)
-{
- sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
- sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
/***************************************************************************
* Initializing and starting, stopping mesh
@@ -1009,6 +996,10 @@ static int lbs_add_mesh(struct lbs_private *priv)
SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
+ mesh_dev->sysfs_groups[0] = &lbs_mesh_attr_group;
+ mesh_dev->sysfs_groups[1] = &boot_opts_group;
+ mesh_dev->sysfs_groups[2] = &mesh_ie_group;
+
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
@@ -1016,19 +1007,10 @@ static int lbs_add_mesh(struct lbs_private *priv)
goto err_free_netdev;
}
- ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
- if (ret)
- goto err_unregister;
-
- lbs_persist_config_init(mesh_dev);
-
/* Everything successful */
ret = 0;
goto done;
-err_unregister:
- unregister_netdev(mesh_dev);
-
err_free_netdev:
free_netdev(mesh_dev);
@@ -1049,8 +1031,6 @@ void lbs_remove_mesh(struct lbs_private *priv)
netif_stop_queue(mesh_dev);
netif_carrier_off(mesh_dev);
- sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
- lbs_persist_config_remove(mesh_dev);
unregister_netdev(mesh_dev);
priv->mesh_dev = NULL;
kfree(mesh_dev->ieee80211_ptr);
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 47e4ff06fa7f5ba4860543a2913bbd0c164640aa ]
This reverts commit 467a37fba93f2b4fe3ab597ff6a517b22b566882.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit is not properly checking for an error at all, so if a
read succeeds from this device, it will error out.
Cc: Aditya Pakki <[email protected]>
Cc: Sean Young <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-frontends/sp8870.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
index 655db8272268..ee893a2f2261 100644
--- a/drivers/media/dvb-frontends/sp8870.c
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -280,9 +280,7 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
sp8870_writereg(state, 0xc05, reg0xc05);
// read status reg in order to clear pending irqs
- err = sp8870_readreg(state, 0x200);
- if (err)
- return err;
+ sp8870_readreg(state, 0x200);
// system controller start
sp8870_microcontroller_start(state);
--
2.30.2
From: Fugang Duan <[email protected]>
[ Upstream commit 619fee9eb13b5d29e4267cb394645608088c28a8 ]
If the memory allocated for cbd_base is failed, it should
free the memory allocated for the queues, otherwise it causes
memory leak.
And if the memory allocated for the queues is failed, it can
return error directly.
Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fec_main.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 55c28fbc5f9e..960def41cc55 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3277,7 +3277,9 @@ static int fec_enet_init(struct net_device *ndev)
return ret;
}
- fec_enet_alloc_queue(ndev);
+ ret = fec_enet_alloc_queue(ndev);
+ if (ret)
+ return ret;
bd_size = (fep->total_tx_ring_size + fep->total_rx_ring_size) * dsize;
@@ -3285,7 +3287,8 @@ static int fec_enet_init(struct net_device *ndev)
cbd_base = dmam_alloc_coherent(&fep->pdev->dev, bd_size, &bd_dma,
GFP_KERNEL);
if (!cbd_base) {
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto free_queue_mem;
}
/* Get the Ethernet address */
@@ -3363,6 +3366,10 @@ static int fec_enet_init(struct net_device *ndev)
fec_enet_update_ethtool_stats(ndev);
return 0;
+
+free_queue_mem:
+ fec_enet_free_queue(ndev);
+ return ret;
}
#ifdef CONFIG_OF
--
2.30.2
From: Richard Sanger <[email protected]>
[ Upstream commit 171c3b151118a2fe0fc1e2a9d1b5a1570cfe82d2 ]
The packetmmap tx ring should only return timestamps if requested via
setsockopt PACKET_TIMESTAMP, as documented. This allows compatibility
with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.
Fixes: b9c32fb27170 ("packet: if hw/sw ts enabled in rx/tx ring, report which ts we got")
Cc: Daniel Borkmann <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Richard Sanger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/packet/af_packet.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 449625c2ccc7..ddb68aa836f7 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -421,7 +421,8 @@ static __u32 tpacket_get_timestamp(struct sk_buff *skb, struct timespec64 *ts,
ktime_to_timespec64_cond(shhwtstamps->hwtstamp, ts))
return TP_STATUS_TS_RAW_HARDWARE;
- if (ktime_to_timespec64_cond(skb->tstamp, ts))
+ if ((flags & SOF_TIMESTAMPING_SOFTWARE) &&
+ ktime_to_timespec64_cond(skb->tstamp, ts))
return TP_STATUS_TS_SOFTWARE;
return 0;
@@ -2339,7 +2340,12 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
skb_copy_bits(skb, 0, h.raw + macoff, snaplen);
- if (!(ts_status = tpacket_get_timestamp(skb, &ts, po->tp_tstamp)))
+ /* Always timestamp; prefer an existing software timestamp taken
+ * closer to the time of capture.
+ */
+ ts_status = tpacket_get_timestamp(skb, &ts,
+ po->tp_tstamp | SOF_TIMESTAMPING_SOFTWARE);
+ if (!ts_status)
ktime_get_real_ts64(&ts);
status |= ts_status;
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit e68671e9e1275dfdda333c3e83b6d28963af16b6 ]
Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/touchscreen_dmi.c | 35 ++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index e1455f1d2472..3743d895399e 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -115,6 +115,32 @@ static const struct ts_dmi_data chuwi_hi10_plus_data = {
.properties = chuwi_hi10_plus_props,
};
+static const struct property_entry chuwi_hi10_pro_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-min-x", 8),
+ PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1912),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 1272),
+ PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+ PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-pro.fw"),
+ PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+ PROPERTY_ENTRY_BOOL("silead,home-button"),
+ { }
+};
+
+static const struct ts_dmi_data chuwi_hi10_pro_data = {
+ .embedded_fw = {
+ .name = "silead/gsl1680-chuwi-hi10-pro.fw",
+ .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+ .length = 42504,
+ .sha256 = { 0xdb, 0x92, 0x68, 0xa8, 0xdb, 0x81, 0x31, 0x00,
+ 0x1f, 0x58, 0x89, 0xdb, 0x19, 0x1b, 0x15, 0x8c,
+ 0x05, 0x14, 0xf4, 0x95, 0xba, 0x15, 0x45, 0x98,
+ 0x42, 0xa3, 0xbb, 0x65, 0xe3, 0x30, 0xa5, 0x93 },
+ },
+ .acpi_name = "MSSL1680:00",
+ .properties = chuwi_hi10_pro_props,
+};
+
static const struct property_entry chuwi_vi8_props[] = {
PROPERTY_ENTRY_U32("touchscreen-min-x", 4),
PROPERTY_ENTRY_U32("touchscreen-min-y", 6),
@@ -872,6 +898,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
},
},
+ {
+ /* Chuwi Hi10 Prus (CWI597) */
+ .driver_data = (void *)&chuwi_hi10_pro_data,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Hi10 pro tablet"),
+ DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+ },
+ },
{
/* Chuwi Vi8 (CWI506) */
.driver_data = (void *)&chuwi_vi8_data,
--
2.30.2
From: Vladimir Oltean <[email protected]>
[ Upstream commit b94cbc909f1d80378a1f541968309e5c1178c98b ]
DSA implements a bunch of 'standardized' ethtool statistics counters,
namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the
hardware driver returns in .get_sset_count(), we need to add 4 to that.
That is ok, except that .get_sset_count() can return a negative error
code, for example:
b53_get_sset_count
-> phy_ethtool_get_sset_count
-> return -EIO
-EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can
imagine that certain error codes may even become positive, although
based on code inspection I did not see instances of that.
Check the error code first, if it is negative return it as-is.
Based on a similar patch for dsa_master_get_strings from Dan Carpenter:
https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/dsa/slave.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index c6806eef906f..9281c9c6a253 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -746,13 +746,15 @@ static int dsa_slave_get_sset_count(struct net_device *dev, int sset)
struct dsa_switch *ds = dp->ds;
if (sset == ETH_SS_STATS) {
- int count;
+ int count = 0;
- count = 4;
- if (ds->ops->get_sset_count)
- count += ds->ops->get_sset_count(ds, dp->index, sset);
+ if (ds->ops->get_sset_count) {
+ count = ds->ops->get_sset_count(ds, dp->index, sset);
+ if (count < 0)
+ return count;
+ }
- return count;
+ return count + 4;
}
return -EOPNOTSUPP;
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 832ce924b1a14e139e184a6da9f5a69a5e47b256 ]
This error path needs to release some memory and call release_sock(sk);
before returning.
Fixes: 6919a8264a32 ("Crypto/chtls: add/delete TLS header in driver")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c
index 188d871f6b8c..c320cc8ca68d 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c
+++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c
@@ -1564,8 +1564,10 @@ found_ok_skb:
cerr = put_cmsg(msg, SOL_TLS, TLS_GET_RECORD_TYPE,
sizeof(thdr->type), &thdr->type);
- if (cerr && thdr->type != TLS_RECORD_TYPE_DATA)
- return -EIO;
+ if (cerr && thdr->type != TLS_RECORD_TYPE_DATA) {
+ copied = -EIO;
+ break;
+ }
/* don't send tls header, skip copy */
goto skip_copy;
}
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit fdda0dd2686ecd1f2e616c9e0366ea71b40c485d ]
This reverts commit a2be42f18d409213bb7e7a736e3ef6ba005115bb.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original patch here is not correct, sysfs files that were created
are not unwound.
Cc: Kangjie Lu <[email protected]>
Cc: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs43130.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c
index 7fb34422a2a4..bb46e993c353 100644
--- a/sound/soc/codecs/cs43130.c
+++ b/sound/soc/codecs/cs43130.c
@@ -2319,8 +2319,6 @@ static int cs43130_probe(struct snd_soc_component *component)
return ret;
cs43130->wq = create_singlethread_workqueue("cs43130_hp");
- if (!cs43130->wq)
- return -ENOMEM;
INIT_WORK(&cs43130->work, cs43130_imp_meas);
}
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 2da441a6491d93eff8ffff523837fd621dc80389 ]
cs43130_probe() does not do any valid error checking of things it
initializes, OR what it does, it does not unwind properly if there are
errors.
Fix this up by moving the sysfs files to an attribute group so the
driver core will correctly add/remove them all at once and handle errors
with them, and correctly check for creating a new workqueue and
unwinding if that fails.
Cc: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs43130.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c
index bb46e993c353..8f70dee95878 100644
--- a/sound/soc/codecs/cs43130.c
+++ b/sound/soc/codecs/cs43130.c
@@ -1735,6 +1735,14 @@ static DEVICE_ATTR(hpload_dc_r, 0444, cs43130_show_dc_r, NULL);
static DEVICE_ATTR(hpload_ac_l, 0444, cs43130_show_ac_l, NULL);
static DEVICE_ATTR(hpload_ac_r, 0444, cs43130_show_ac_r, NULL);
+static struct attribute *hpload_attrs[] = {
+ &dev_attr_hpload_dc_l.attr,
+ &dev_attr_hpload_dc_r.attr,
+ &dev_attr_hpload_ac_l.attr,
+ &dev_attr_hpload_ac_r.attr,
+};
+ATTRIBUTE_GROUPS(hpload);
+
static struct reg_sequence hp_en_cal_seq[] = {
{CS43130_INT_MASK_4, CS43130_INT_MASK_ALL},
{CS43130_HP_MEAS_LOAD_1, 0},
@@ -2302,23 +2310,15 @@ static int cs43130_probe(struct snd_soc_component *component)
cs43130->hpload_done = false;
if (cs43130->dc_meas) {
- ret = device_create_file(component->dev, &dev_attr_hpload_dc_l);
- if (ret < 0)
- return ret;
-
- ret = device_create_file(component->dev, &dev_attr_hpload_dc_r);
- if (ret < 0)
- return ret;
-
- ret = device_create_file(component->dev, &dev_attr_hpload_ac_l);
- if (ret < 0)
- return ret;
-
- ret = device_create_file(component->dev, &dev_attr_hpload_ac_r);
- if (ret < 0)
+ ret = sysfs_create_groups(&component->dev->kobj, hpload_groups);
+ if (ret)
return ret;
cs43130->wq = create_singlethread_workqueue("cs43130_hp");
+ if (!cs43130->wq) {
+ sysfs_remove_groups(&component->dev->kobj, hpload_groups);
+ return -ENOMEM;
+ }
INIT_WORK(&cs43130->work, cs43130_imp_meas);
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit a93a0a15876d2a077a3bc260b387d2457a051f24 ]
'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.
Remove the incorrect 'mdiobus_free' in the remove function.
Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Russell King <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/mdio/mdio-thunder.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/mdio/mdio-thunder.c b/drivers/net/mdio/mdio-thunder.c
index 3d7eda99d34e..dd7430c998a2 100644
--- a/drivers/net/mdio/mdio-thunder.c
+++ b/drivers/net/mdio/mdio-thunder.c
@@ -126,7 +126,6 @@ static void thunder_mdiobus_pci_remove(struct pci_dev *pdev)
continue;
mdiobus_unregister(bus->mii_bus);
- mdiobus_free(bus->mii_bus);
oct_mdio_writeq(0, bus->register_base + SMI_EN);
}
pci_release_regions(pdev);
--
2.30.2
From: Ayush Sawal <[email protected]>
[ Upstream commit 65e302a9bd57b62872040d57eea1201562a7cbb2 ]
This patch maintain the list of active tids and clear all the active
connection resources when DETACH notification comes.
Fixes: a8c16e8ed624f ("crypto/chcr: move nic TLS functionality to drivers/net")
Signed-off-by: Ayush Sawal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +-
.../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 80 ++++++++++++++++++-
.../chelsio/inline_crypto/ch_ktls/chcr_ktls.h | 2 +
3 files changed, 82 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 7fd264a6d085..23c13f34a572 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -6484,9 +6484,9 @@ static void cxgb4_ktls_dev_del(struct net_device *netdev,
adap->uld[CXGB4_ULD_KTLS].tlsdev_ops->tls_dev_del(netdev, tls_ctx,
direction);
- cxgb4_set_ktls_feature(adap, FW_PARAMS_PARAM_DEV_KTLS_HW_DISABLE);
out_unlock:
+ cxgb4_set_ktls_feature(adap, FW_PARAMS_PARAM_DEV_KTLS_HW_DISABLE);
mutex_unlock(&uld_mutex);
}
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c
index 3a50d5a62ace..f9353826b245 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c
+++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c
@@ -59,6 +59,7 @@ static int chcr_get_nfrags_to_send(struct sk_buff *skb, u32 start, u32 len)
}
static int chcr_init_tcb_fields(struct chcr_ktls_info *tx_info);
+static void clear_conn_resources(struct chcr_ktls_info *tx_info);
/*
* chcr_ktls_save_keys: calculate and save crypto keys.
* @tx_info - driver specific tls info.
@@ -370,10 +371,14 @@ static void chcr_ktls_dev_del(struct net_device *netdev,
chcr_get_ktls_tx_context(tls_ctx);
struct chcr_ktls_info *tx_info = tx_ctx->chcr_info;
struct ch_ktls_port_stats_debug *port_stats;
+ struct chcr_ktls_uld_ctx *u_ctx;
if (!tx_info)
return;
+ u_ctx = tx_info->adap->uld[CXGB4_ULD_KTLS].handle;
+ if (u_ctx && u_ctx->detach)
+ return;
/* clear l2t entry */
if (tx_info->l2te)
cxgb4_l2t_release(tx_info->l2te);
@@ -390,6 +395,8 @@ static void chcr_ktls_dev_del(struct net_device *netdev,
if (tx_info->tid != -1) {
cxgb4_remove_tid(&tx_info->adap->tids, tx_info->tx_chan,
tx_info->tid, tx_info->ip_family);
+
+ xa_erase(&u_ctx->tid_list, tx_info->tid);
}
port_stats = &tx_info->adap->ch_ktls_stats.ktls_port[tx_info->port_id];
@@ -417,6 +424,7 @@ static int chcr_ktls_dev_add(struct net_device *netdev, struct sock *sk,
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct ch_ktls_port_stats_debug *port_stats;
struct chcr_ktls_ofld_ctx_tx *tx_ctx;
+ struct chcr_ktls_uld_ctx *u_ctx;
struct chcr_ktls_info *tx_info;
struct dst_entry *dst;
struct adapter *adap;
@@ -431,6 +439,7 @@ static int chcr_ktls_dev_add(struct net_device *netdev, struct sock *sk,
adap = pi->adapter;
port_stats = &adap->ch_ktls_stats.ktls_port[pi->port_id];
atomic64_inc(&port_stats->ktls_tx_connection_open);
+ u_ctx = adap->uld[CXGB4_ULD_KTLS].handle;
if (direction == TLS_OFFLOAD_CTX_DIR_RX) {
pr_err("not expecting for RX direction\n");
@@ -440,6 +449,9 @@ static int chcr_ktls_dev_add(struct net_device *netdev, struct sock *sk,
if (tx_ctx->chcr_info)
goto out;
+ if (u_ctx && u_ctx->detach)
+ goto out;
+
tx_info = kvzalloc(sizeof(*tx_info), GFP_KERNEL);
if (!tx_info)
goto out;
@@ -575,6 +587,8 @@ free_tid:
cxgb4_remove_tid(&tx_info->adap->tids, tx_info->tx_chan,
tx_info->tid, tx_info->ip_family);
+ xa_erase(&u_ctx->tid_list, tx_info->tid);
+
put_module:
/* release module refcount */
module_put(THIS_MODULE);
@@ -639,8 +653,12 @@ static int chcr_ktls_cpl_act_open_rpl(struct adapter *adap,
{
const struct cpl_act_open_rpl *p = (void *)input;
struct chcr_ktls_info *tx_info = NULL;
+ struct chcr_ktls_ofld_ctx_tx *tx_ctx;
+ struct chcr_ktls_uld_ctx *u_ctx;
unsigned int atid, tid, status;
+ struct tls_context *tls_ctx;
struct tid_info *t;
+ int ret = 0;
tid = GET_TID(p);
status = AOPEN_STATUS_G(ntohl(p->atid_status));
@@ -672,14 +690,29 @@ static int chcr_ktls_cpl_act_open_rpl(struct adapter *adap,
if (!status) {
tx_info->tid = tid;
cxgb4_insert_tid(t, tx_info, tx_info->tid, tx_info->ip_family);
+ /* Adding tid */
+ tls_ctx = tls_get_ctx(tx_info->sk);
+ tx_ctx = chcr_get_ktls_tx_context(tls_ctx);
+ u_ctx = adap->uld[CXGB4_ULD_KTLS].handle;
+ if (u_ctx) {
+ ret = xa_insert_bh(&u_ctx->tid_list, tid, tx_ctx,
+ GFP_NOWAIT);
+ if (ret < 0) {
+ pr_err("%s: Failed to allocate tid XA entry = %d\n",
+ __func__, tx_info->tid);
+ tx_info->open_state = CH_KTLS_OPEN_FAILURE;
+ goto out;
+ }
+ }
tx_info->open_state = CH_KTLS_OPEN_SUCCESS;
} else {
tx_info->open_state = CH_KTLS_OPEN_FAILURE;
}
+out:
spin_unlock(&tx_info->lock);
complete(&tx_info->completion);
- return 0;
+ return ret;
}
/*
@@ -2097,6 +2130,8 @@ static void *chcr_ktls_uld_add(const struct cxgb4_lld_info *lldi)
goto out;
}
u_ctx->lldi = *lldi;
+ u_ctx->detach = false;
+ xa_init_flags(&u_ctx->tid_list, XA_FLAGS_LOCK_BH);
out:
return u_ctx;
}
@@ -2130,6 +2165,45 @@ static int chcr_ktls_uld_rx_handler(void *handle, const __be64 *rsp,
return 0;
}
+static void clear_conn_resources(struct chcr_ktls_info *tx_info)
+{
+ /* clear l2t entry */
+ if (tx_info->l2te)
+ cxgb4_l2t_release(tx_info->l2te);
+
+#if IS_ENABLED(CONFIG_IPV6)
+ /* clear clip entry */
+ if (tx_info->ip_family == AF_INET6)
+ cxgb4_clip_release(tx_info->netdev, (const u32 *)
+ &tx_info->sk->sk_v6_rcv_saddr,
+ 1);
+#endif
+
+ /* clear tid */
+ if (tx_info->tid != -1)
+ cxgb4_remove_tid(&tx_info->adap->tids, tx_info->tx_chan,
+ tx_info->tid, tx_info->ip_family);
+}
+
+static void ch_ktls_reset_all_conn(struct chcr_ktls_uld_ctx *u_ctx)
+{
+ struct ch_ktls_port_stats_debug *port_stats;
+ struct chcr_ktls_ofld_ctx_tx *tx_ctx;
+ struct chcr_ktls_info *tx_info;
+ unsigned long index;
+
+ xa_for_each(&u_ctx->tid_list, index, tx_ctx) {
+ tx_info = tx_ctx->chcr_info;
+ clear_conn_resources(tx_info);
+ port_stats = &tx_info->adap->ch_ktls_stats.ktls_port[tx_info->port_id];
+ atomic64_inc(&port_stats->ktls_tx_connection_close);
+ kvfree(tx_info);
+ tx_ctx->chcr_info = NULL;
+ /* release module refcount */
+ module_put(THIS_MODULE);
+ }
+}
+
static int chcr_ktls_uld_state_change(void *handle, enum cxgb4_state new_state)
{
struct chcr_ktls_uld_ctx *u_ctx = handle;
@@ -2146,7 +2220,10 @@ static int chcr_ktls_uld_state_change(void *handle, enum cxgb4_state new_state)
case CXGB4_STATE_DETACH:
pr_info("%s: Down\n", pci_name(u_ctx->lldi.pdev));
mutex_lock(&dev_mutex);
+ u_ctx->detach = true;
list_del(&u_ctx->entry);
+ ch_ktls_reset_all_conn(u_ctx);
+ xa_destroy(&u_ctx->tid_list);
mutex_unlock(&dev_mutex);
break;
default:
@@ -2185,6 +2262,7 @@ static void __exit chcr_ktls_exit(void)
adap = pci_get_drvdata(u_ctx->lldi.pdev);
memset(&adap->ch_ktls_stats, 0, sizeof(adap->ch_ktls_stats));
list_del(&u_ctx->entry);
+ xa_destroy(&u_ctx->tid_list);
kfree(u_ctx);
}
mutex_unlock(&dev_mutex);
diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.h b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.h
index 18b3b1f02415..10572dc55365 100644
--- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.h
+++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.h
@@ -75,6 +75,8 @@ struct chcr_ktls_ofld_ctx_tx {
struct chcr_ktls_uld_ctx {
struct list_head entry;
struct cxgb4_lld_info lldi;
+ struct xarray tid_list;
+ bool detach;
};
static inline struct chcr_ktls_ofld_ctx_tx *
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit e1d027dd97e1e750669cdc0d3b016a4f54e473eb ]
'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.
Remove the incorrect 'mdiobus_free' in the error handling path of the
probe function and in remove function.
Suggested-By: Andrew Lunn <[email protected]>
Fixes: 35d2aeac9810 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Russell King <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/mdio/mdio-octeon.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/mdio/mdio-octeon.c b/drivers/net/mdio/mdio-octeon.c
index d1e1009d51af..6faf39314ac9 100644
--- a/drivers/net/mdio/mdio-octeon.c
+++ b/drivers/net/mdio/mdio-octeon.c
@@ -71,7 +71,6 @@ static int octeon_mdiobus_probe(struct platform_device *pdev)
return 0;
fail_register:
- mdiobus_free(bus->mii_bus);
smi_en.u64 = 0;
oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
return err;
@@ -85,7 +84,6 @@ static int octeon_mdiobus_remove(struct platform_device *pdev)
bus = platform_get_drvdata(pdev);
mdiobus_unregister(bus->mii_bus);
- mdiobus_free(bus->mii_bus);
smi_en.u64 = 0;
oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
return 0;
--
2.30.2
From: Tao Liu <[email protected]>
[ Upstream commit e4df1b0c24350a0f00229ff895a91f1072bd850d ]
We have observed meters working unexpected if traffic is 3+Gbit/s
with multiple connections.
now_ms is not pretected by meter->lock, we may get a negative
long_delta_ms when another cpu updated meter->used, then:
delta_ms = (u32)long_delta_ms;
which will be a large value.
band->bucket += delta_ms * band->rate;
then we get a wrong band->bucket.
OpenVswitch userspace datapath has fixed the same issue[1] some
time ago, and we port the implementation to kernel datapath.
[1] https://patchwork.ozlabs.org/project/openvswitch/patch/[email protected]/
Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure")
Signed-off-by: Tao Liu <[email protected]>
Suggested-by: Ilya Maximets <[email protected]>
Reviewed-by: Ilya Maximets <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/meter.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c
index 8fbefd52af7f..e594b4d6b58a 100644
--- a/net/openvswitch/meter.c
+++ b/net/openvswitch/meter.c
@@ -611,6 +611,14 @@ bool ovs_meter_execute(struct datapath *dp, struct sk_buff *skb,
spin_lock(&meter->lock);
long_delta_ms = (now_ms - meter->used); /* ms */
+ if (long_delta_ms < 0) {
+ /* This condition means that we have several threads fighting
+ * for a meter lock, and the one who received the packets a
+ * bit later wins. Assuming that all racing threads received
+ * packets at the same time to avoid overflow.
+ */
+ long_delta_ms = 0;
+ }
/* Make sure delta_ms will not be too large, so that bucket will not
* wrap around below.
--
2.30.2
From: Jim Ma <[email protected]>
[ Upstream commit 974271e5ed45cfe4daddbeb16224a2156918530e ]
In tls_sw_splice_read, checkout MSG_* is inappropriate, should use
SPLICE_*, update tls_wait_data to accept nonblock arguments instead
of flags for recvmsg and splice.
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Jim Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tls/tls_sw.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index 845c628ac1b2..3abe5257f757 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -37,6 +37,7 @@
#include <linux/sched/signal.h>
#include <linux/module.h>
+#include <linux/splice.h>
#include <crypto/aead.h>
#include <net/strparser.h>
@@ -1282,7 +1283,7 @@ int tls_sw_sendpage(struct sock *sk, struct page *page,
}
static struct sk_buff *tls_wait_data(struct sock *sk, struct sk_psock *psock,
- int flags, long timeo, int *err)
+ bool nonblock, long timeo, int *err)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
@@ -1307,7 +1308,7 @@ static struct sk_buff *tls_wait_data(struct sock *sk, struct sk_psock *psock,
if (sock_flag(sk, SOCK_DONE))
return NULL;
- if ((flags & MSG_DONTWAIT) || !timeo) {
+ if (nonblock || !timeo) {
*err = -EAGAIN;
return NULL;
}
@@ -1787,7 +1788,7 @@ int tls_sw_recvmsg(struct sock *sk,
bool async_capable;
bool async = false;
- skb = tls_wait_data(sk, psock, flags, timeo, &err);
+ skb = tls_wait_data(sk, psock, flags & MSG_DONTWAIT, timeo, &err);
if (!skb) {
if (psock) {
int ret = __tcp_bpf_recvmsg(sk, psock,
@@ -1991,9 +1992,9 @@ ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos,
lock_sock(sk);
- timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
+ timeo = sock_rcvtimeo(sk, flags & SPLICE_F_NONBLOCK);
- skb = tls_wait_data(sk, NULL, flags, timeo, &err);
+ skb = tls_wait_data(sk, NULL, flags & SPLICE_F_NONBLOCK, timeo, &err);
if (!skb)
goto splice_read_end;
--
2.30.2
From: Anirudh Rayabharam <[email protected]>
[ Upstream commit 54433367840b46a1555c8ed36c4c0cfc5dbf1358 ]
Propagate error code from failure of ath6kl_wmi_cmd_send() to the
caller.
Signed-off-by: Anirudh Rayabharam <[email protected]>
Cc: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath6kl/debug.c | 5 ++++-
drivers/net/wireless/ath/ath6kl/wmi.c | 4 +---
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index 7506cea46f58..433a047f3747 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -1027,14 +1027,17 @@ static ssize_t ath6kl_lrssi_roam_write(struct file *file,
{
struct ath6kl *ar = file->private_data;
unsigned long lrssi_roam_threshold;
+ int ret;
if (kstrtoul_from_user(user_buf, count, 0, &lrssi_roam_threshold))
return -EINVAL;
ar->lrssi_roam_threshold = lrssi_roam_threshold;
- ath6kl_wmi_set_roam_lrssi_cmd(ar->wmi, ar->lrssi_roam_threshold);
+ ret = ath6kl_wmi_set_roam_lrssi_cmd(ar->wmi, ar->lrssi_roam_threshold);
+ if (ret)
+ return ret;
return count;
}
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 99be0d20f9a5..dbc47702a268 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -776,10 +776,8 @@ int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi)
cmd->info.params.roam_rssi_floor = DEF_LRSSI_ROAM_FLOOR;
cmd->roam_ctrl = WMI_SET_LRSSI_SCAN_PARAMS;
- ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID,
+ return ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID,
NO_SYNC_WMIFLAG);
-
- return 0;
}
int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)
--
2.30.2
From: Yunsheng Lin <[email protected]>
[ Upstream commit 102b55ee92f9fda4dde7a45d2b20538e6e3e3d1e ]
Currently qdisc_run() checks the STATE_DEACTIVATED of lockless
qdisc before calling __qdisc_run(), which ultimately clear the
STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED
is set before clearing STATE_MISSED, there may be rescheduling
of net_tx_action() at the end of qdisc_run_end(), see below:
CPU0(net_tx_atcion) CPU1(__dev_xmit_skb) CPU2(dev_deactivate)
. . .
. set STATE_MISSED .
. __netif_schedule() .
. . set STATE_DEACTIVATED
. . qdisc_reset()
. . .
.<--------------- . synchronize_net()
clear __QDISC_STATE_SCHED | . .
. | . .
. | . some_qdisc_is_busy()
. | . return *false*
. | . .
test STATE_DEACTIVATED | . .
__qdisc_run() *not* called | . .
. | . .
test STATE_MISS | . .
__netif_schedule()--------| . .
. . .
. . .
__qdisc_run() is not called by net_tx_atcion() in CPU0 because
CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and
STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule
is called at the end of qdisc_run_end(), causing tx action
rescheduling problem.
qdisc_run() called by net_tx_action() runs in the softirq context,
which should has the same semantic as the qdisc_run() called by
__dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a
synchronize_net() between STATE_DEACTIVATED flag being set and
qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely
bail out for the deactived lockless qdisc in net_tx_action(), and
qdisc_reset() will reset all skb not dequeued yet.
So add the rcu_read_lock() explicitly to protect the qdisc_run()
and do the STATE_DEACTIVATED checking in net_tx_action() before
calling qdisc_run_begin(). Another option is to do the checking in
the qdisc_run_end(), but it will add unnecessary overhead for
non-tx_action case, because __dev_queue_xmit() will not see qdisc
with STATE_DEACTIVATED after synchronize_net(), the qdisc with
STATE_DEACTIVATED can only be seen by net_tx_action() because of
__netif_schedule().
The STATE_DEACTIVATED checking in qdisc_run() is to avoid race
between net_tx_action() and qdisc_reset(), see:
commit d518d2ed8640 ("net/sched: fix race between deactivation
and dequeue for NOLOCK qdisc"). As the bailout added above for
deactived lockless qdisc in net_tx_action() provides better
protection for the race without calling qdisc_run() at all, so
remove the STATE_DEACTIVATED checking in qdisc_run().
After qdisc_reset(), there is no skb in qdisc to be dequeued, so
clear the STATE_MISSED in dev_reset_queue() too.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Yunsheng Lin <[email protected]>
V8: Clearing STATE_MISSED before calling __netif_schedule() has
avoid the endless rescheduling problem, but there may still
be a unnecessary rescheduling, so adjust the commit log.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/pkt_sched.h | 7 +------
net/core/dev.c | 26 ++++++++++++++++++++++----
net/sched/sch_generic.c | 4 +++-
3 files changed, 26 insertions(+), 11 deletions(-)
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 4ed32e6b0201..2be90a54a404 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -123,12 +123,7 @@ void __qdisc_run(struct Qdisc *q);
static inline void qdisc_run(struct Qdisc *q)
{
if (qdisc_run_begin(q)) {
- /* NOLOCK qdisc must check 'state' under the qdisc seqlock
- * to avoid racing with dev_qdisc_reset()
- */
- if (!(q->flags & TCQ_F_NOLOCK) ||
- likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state)))
- __qdisc_run(q);
+ __qdisc_run(q);
qdisc_run_end(q);
}
}
diff --git a/net/core/dev.c b/net/core/dev.c
index 2f17a4ac82f0..76a932c52255 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4910,25 +4910,43 @@ static __latent_entropy void net_tx_action(struct softirq_action *h)
sd->output_queue_tailp = &sd->output_queue;
local_irq_enable();
+ rcu_read_lock();
+
while (head) {
struct Qdisc *q = head;
spinlock_t *root_lock = NULL;
head = head->next_sched;
- if (!(q->flags & TCQ_F_NOLOCK)) {
- root_lock = qdisc_lock(q);
- spin_lock(root_lock);
- }
/* We need to make sure head->next_sched is read
* before clearing __QDISC_STATE_SCHED
*/
smp_mb__before_atomic();
+
+ if (!(q->flags & TCQ_F_NOLOCK)) {
+ root_lock = qdisc_lock(q);
+ spin_lock(root_lock);
+ } else if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED,
+ &q->state))) {
+ /* There is a synchronize_net() between
+ * STATE_DEACTIVATED flag being set and
+ * qdisc_reset()/some_qdisc_is_busy() in
+ * dev_deactivate(), so we can safely bail out
+ * early here to avoid data race between
+ * qdisc_deactivate() and some_qdisc_is_busy()
+ * for lockless qdisc.
+ */
+ clear_bit(__QDISC_STATE_SCHED, &q->state);
+ continue;
+ }
+
clear_bit(__QDISC_STATE_SCHED, &q->state);
qdisc_run(q);
if (root_lock)
spin_unlock(root_lock);
}
+
+ rcu_read_unlock();
}
xfrm_dev_backlog(sd);
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 8c6b97cc5e41..e6844d3567ca 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1177,8 +1177,10 @@ static void dev_reset_queue(struct net_device *dev,
qdisc_reset(qdisc);
spin_unlock_bh(qdisc_lock(qdisc));
- if (nolock)
+ if (nolock) {
+ clear_bit(__QDISC_STATE_MISSED, &qdisc->state);
spin_unlock_bh(&qdisc->seqlock);
+ }
}
static bool some_qdisc_is_busy(struct net_device *dev)
--
2.30.2
From: Yunsheng Lin <[email protected]>
[ Upstream commit a90c57f2cedd52a511f739fb55e6244e22e1a2fb ]
Lockless qdisc has below concurrent problem:
cpu0 cpu1
. .
q->enqueue .
. .
qdisc_run_begin() .
. .
dequeue_skb() .
. .
sch_direct_xmit() .
. .
. q->enqueue
. qdisc_run_begin()
. return and do nothing
. .
qdisc_run_end() .
cpu1 enqueue a skb without calling __qdisc_run() because cpu0
has not released the lock yet and spin_trylock() return false
for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb
enqueued by cpu1 when calling dequeue_skb() because cpu1 may
enqueue the skb after cpu0 calling dequeue_skb() and before
cpu0 calling qdisc_run_end().
Lockless qdisc has below another concurrent problem when
tx_action is involved:
cpu0(serving tx_action) cpu1 cpu2
. . .
. q->enqueue .
. qdisc_run_begin() .
. dequeue_skb() .
. . q->enqueue
. . .
. sch_direct_xmit() .
. . qdisc_run_begin()
. . return and do nothing
. . .
clear __QDISC_STATE_SCHED . .
qdisc_run_begin() . .
return and do nothing . .
. . .
. qdisc_run_end() .
This patch fixes the above data race by:
1. If the first spin_trylock() return false and STATE_MISSED is
not set, set STATE_MISSED and retry another spin_trylock() in
case other CPU may not see STATE_MISSED after it releases the
lock.
2. reschedule if STATE_MISSED is set after the lock is released
at the end of qdisc_run_end().
For tx_action case, STATE_MISSED is also set when cpu1 is at the
end if qdisc_run_end(), so tx_action will be rescheduled again
to dequeue the skb enqueued by cpu2.
Clear STATE_MISSED before retrying a dequeuing when dequeuing
returns NULL in order to reduce the overhead of the second
spin_trylock() and __netif_schedule() calling.
Also clear the STATE_MISSED before calling __netif_schedule()
at the end of qdisc_run_end() to avoid doing another round of
dequeuing in the pfifo_fast_dequeue().
The performance impact of this patch, tested using pktgen and
dummy netdev with pfifo_fast qdisc attached:
threads without+this_patch with+this_patch delta
1 2.61Mpps 2.60Mpps -0.3%
2 3.97Mpps 3.82Mpps -3.7%
4 5.62Mpps 5.59Mpps -0.5%
8 2.78Mpps 2.77Mpps -0.3%
16 2.22Mpps 2.22Mpps -0.0%
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <[email protected]>
Tested-by: Juergen Gross <[email protected]>
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/sch_generic.h | 35 ++++++++++++++++++++++++++++++++++-
net/sched/sch_generic.c | 19 +++++++++++++++++++
2 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 3648164faa06..4dd2c9e34976 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -36,6 +36,7 @@ struct qdisc_rate_table {
enum qdisc_state_t {
__QDISC_STATE_SCHED,
__QDISC_STATE_DEACTIVATED,
+ __QDISC_STATE_MISSED,
};
struct qdisc_size_table {
@@ -159,8 +160,33 @@ static inline bool qdisc_is_empty(const struct Qdisc *qdisc)
static inline bool qdisc_run_begin(struct Qdisc *qdisc)
{
if (qdisc->flags & TCQ_F_NOLOCK) {
+ if (spin_trylock(&qdisc->seqlock))
+ goto nolock_empty;
+
+ /* If the MISSED flag is set, it means other thread has
+ * set the MISSED flag before second spin_trylock(), so
+ * we can return false here to avoid multi cpus doing
+ * the set_bit() and second spin_trylock() concurrently.
+ */
+ if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))
+ return false;
+
+ /* Set the MISSED flag before the second spin_trylock(),
+ * if the second spin_trylock() return false, it means
+ * other cpu holding the lock will do dequeuing for us
+ * or it will see the MISSED flag set after releasing
+ * lock and reschedule the net_tx_action() to do the
+ * dequeuing.
+ */
+ set_bit(__QDISC_STATE_MISSED, &qdisc->state);
+
+ /* Retry again in case other CPU may not see the new flag
+ * after it releases the lock at the end of qdisc_run_end().
+ */
if (!spin_trylock(&qdisc->seqlock))
return false;
+
+nolock_empty:
WRITE_ONCE(qdisc->empty, false);
} else if (qdisc_is_running(qdisc)) {
return false;
@@ -176,8 +202,15 @@ static inline bool qdisc_run_begin(struct Qdisc *qdisc)
static inline void qdisc_run_end(struct Qdisc *qdisc)
{
write_seqcount_end(&qdisc->running);
- if (qdisc->flags & TCQ_F_NOLOCK)
+ if (qdisc->flags & TCQ_F_NOLOCK) {
spin_unlock(&qdisc->seqlock);
+
+ if (unlikely(test_bit(__QDISC_STATE_MISSED,
+ &qdisc->state))) {
+ clear_bit(__QDISC_STATE_MISSED, &qdisc->state);
+ __netif_schedule(qdisc);
+ }
+ }
}
static inline bool qdisc_may_bulk(const struct Qdisc *qdisc)
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 49eae93d1489..8c6b97cc5e41 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -640,8 +640,10 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
{
struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
struct sk_buff *skb = NULL;
+ bool need_retry = true;
int band;
+retry:
for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
struct skb_array *q = band2list(priv, band);
@@ -652,6 +654,23 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
}
if (likely(skb)) {
qdisc_update_stats_at_dequeue(qdisc, skb);
+ } else if (need_retry &&
+ test_bit(__QDISC_STATE_MISSED, &qdisc->state)) {
+ /* Delay clearing the STATE_MISSED here to reduce
+ * the overhead of the second spin_trylock() in
+ * qdisc_run_begin() and __netif_schedule() calling
+ * in qdisc_run_end().
+ */
+ clear_bit(__QDISC_STATE_MISSED, &qdisc->state);
+
+ /* Make sure dequeuing happens after clearing
+ * STATE_MISSED.
+ */
+ smp_mb__after_atomic();
+
+ need_retry = false;
+
+ goto retry;
} else {
WRITE_ONCE(qdisc->empty, true);
}
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ]
Fix to return -EPERM from the error handling case instead of 0, as done
elsewhere in this function.
Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 3e8a179f39db..633b10389653 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8247,9 +8247,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
BNX2_WR(bp, PCI_COMMAND, reg);
} else if ((BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A1) &&
!(bp->flags & BNX2_FLAG_PCIX)) {
-
dev_err(&pdev->dev,
"5706 A1 can only be used in a PCIX bus, aborting\n");
+ rc = -EPERM;
goto err_out_unmap;
}
--
2.30.2
From: Yunsheng Lin <[email protected]>
[ Upstream commit dcad9ee9e0663d74a89b25b987f9c7be86432812 ]
The netdev qeueue might be stopped when byte queue limit has
reached or tx hw ring is full, net_tx_action() may still be
rescheduled if STATE_MISSED is set, which consumes unnecessary
cpu without dequeuing and transmiting any skb because the
netdev queue is stopped, see qdisc_run_end().
This patch fixes it by checking the netdev queue state before
calling qdisc_run() and clearing STATE_MISSED if netdev queue is
stopped during qdisc_run(), the net_tx_action() is rescheduled
again when netdev qeueue is restarted, see netif_tx_wake_queue().
As there is time window between netif_xmit_frozen_or_stopped()
checking and STATE_MISSED clearing, between which STATE_MISSED
may set by net_tx_action() scheduled by netif_tx_wake_queue(),
so set the STATE_MISSED again if netdev queue is restarted.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Reported-by: Michal Kubecek <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/dev.c | 3 ++-
net/sched/sch_generic.c | 27 ++++++++++++++++++++++++++-
2 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 76a932c52255..0c9ce36afc8c 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3764,7 +3764,8 @@ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
if (q->flags & TCQ_F_NOLOCK) {
rc = q->enqueue(skb, q, &to_free) & NET_XMIT_MASK;
- qdisc_run(q);
+ if (likely(!netif_xmit_frozen_or_stopped(txq)))
+ qdisc_run(q);
if (unlikely(to_free))
kfree_skb_list(to_free);
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index e6844d3567ca..854d2b38db85 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -35,6 +35,25 @@
const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
EXPORT_SYMBOL(default_qdisc_ops);
+static void qdisc_maybe_clear_missed(struct Qdisc *q,
+ const struct netdev_queue *txq)
+{
+ clear_bit(__QDISC_STATE_MISSED, &q->state);
+
+ /* Make sure the below netif_xmit_frozen_or_stopped()
+ * checking happens after clearing STATE_MISSED.
+ */
+ smp_mb__after_atomic();
+
+ /* Checking netif_xmit_frozen_or_stopped() again to
+ * make sure STATE_MISSED is set if the STATE_MISSED
+ * set by netif_tx_wake_queue()'s rescheduling of
+ * net_tx_action() is cleared by the above clear_bit().
+ */
+ if (!netif_xmit_frozen_or_stopped(txq))
+ set_bit(__QDISC_STATE_MISSED, &q->state);
+}
+
/* Main transmission queue. */
/* Modifications to data participating in scheduling must be protected with
@@ -74,6 +93,7 @@ static inline struct sk_buff *__skb_dequeue_bad_txq(struct Qdisc *q)
}
} else {
skb = SKB_XOFF_MAGIC;
+ qdisc_maybe_clear_missed(q, txq);
}
}
@@ -242,6 +262,7 @@ static struct sk_buff *dequeue_skb(struct Qdisc *q, bool *validate,
}
} else {
skb = NULL;
+ qdisc_maybe_clear_missed(q, txq);
}
if (lock)
spin_unlock(lock);
@@ -251,8 +272,10 @@ validate:
*validate = true;
if ((q->flags & TCQ_F_ONETXQUEUE) &&
- netif_xmit_frozen_or_stopped(txq))
+ netif_xmit_frozen_or_stopped(txq)) {
+ qdisc_maybe_clear_missed(q, txq);
return skb;
+ }
skb = qdisc_dequeue_skb_bad_txq(q);
if (unlikely(skb)) {
@@ -311,6 +334,8 @@ bool sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q,
HARD_TX_LOCK(dev, txq, smp_processor_id());
if (!netif_xmit_frozen_or_stopped(txq))
skb = dev_hard_start_xmit(skb, dev, txq, &ret);
+ else
+ qdisc_maybe_clear_missed(q, txq);
HARD_TX_UNLOCK(dev, txq);
} else {
--
2.30.2
From: Catherine Sullivan <[email protected]>
[ Upstream commit 5aec55b46c6238506cdf0c60cd0e42ab77a1e5e0 ]
Correctly check the TX QPL was assigned and unassigned if
other steps in the allocation fail.
Fixes: f5cedc84a30d (gve: Add transmit and receive support)
Signed-off-by: Catherine Sullivan <[email protected]>
Signed-off-by: David Awogbemila <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_tx.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/google/gve/gve_tx.c b/drivers/net/ethernet/google/gve/gve_tx.c
index d0244feb0301..30532ee28dd3 100644
--- a/drivers/net/ethernet/google/gve/gve_tx.c
+++ b/drivers/net/ethernet/google/gve/gve_tx.c
@@ -207,10 +207,12 @@ static int gve_tx_alloc_ring(struct gve_priv *priv, int idx)
goto abort_with_info;
tx->tx_fifo.qpl = gve_assign_tx_qpl(priv);
+ if (!tx->tx_fifo.qpl)
+ goto abort_with_desc;
/* map Tx FIFO */
if (gve_tx_fifo_init(priv, &tx->tx_fifo))
- goto abort_with_desc;
+ goto abort_with_qpl;
tx->q_resources =
dma_alloc_coherent(hdev,
@@ -229,6 +231,8 @@ static int gve_tx_alloc_ring(struct gve_priv *priv, int idx)
abort_with_fifo:
gve_tx_fifo_release(priv, &tx->tx_fifo);
+abort_with_qpl:
+ gve_unassign_qpl(priv, tx->tx_fifo.qpl->id);
abort_with_desc:
dma_free_coherent(hdev, bytes, tx->desc, tx->bus);
tx->desc = NULL;
--
2.30.2
From: Taehee Yoo <[email protected]>
[ Upstream commit 020ef930b826d21c5446fdc9db80fd72a791bc21 ]
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip netns exec B ip link set veth1 up
ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
for i in {1..99}
do
let A=$i-1
ip netns exec A ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
ip netns exec A ip link set ip6gre$i up
ip netns exec B ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
ip netns exec B ip link set ip6gre$i up
done
Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS: 0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
skb_put.cold.104+0x22/0x22
ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? rcu_read_lock_sched_held+0x91/0xc0
mld_newpack+0x398/0x8f0
? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
? lock_contended+0xc40/0xc40
add_grhead.isra.33+0x280/0x380
add_grec+0x5ca/0xff0
? mld_sendpack+0xf40/0xf40
? lock_downgrade+0x690/0x690
mld_send_initial_cr.part.34+0xb9/0x180
ipv6_mc_dad_complete+0x15d/0x1b0
addrconf_dad_completed+0x8d2/0xbb0
? lock_downgrade+0x690/0x690
? addrconf_rs_timer+0x660/0x660
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
Allowing high order page allocation could fix this problem.
Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/mcast.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 8cd2782a31e4..9fb5077f8e9a 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1601,10 +1601,7 @@ static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu)
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- /* limit our allocations to order-0 page */
- size = min_t(int, size, SKB_MAX_ORDER(0, 0));
skb = sock_alloc_send_skb(sk, size, 1, &err);
-
if (!skb)
return NULL;
--
2.30.2
From: Catherine Sullivan <[email protected]>
[ Upstream commit f81781835f0adfae8d701545386030d223efcd6f ]
As currently written, if the driver checks for more work (via
gve_tx_poll or gve_rx_poll) before the device posts work and the
irq doorbell is not unmasked
(via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device
attempts to raise an interrupt, an interrupt is lost and this could
potentially lead to the traffic being completely halted. For
example, if a tx queue has already been stopped, the driver won't get
the chance to complete work and egress will be halted.
We need a full memory barrier in the poll
routine to ensure that the irq doorbell is unmasked before the driver
checks for more work.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <[email protected]>
Signed-off-by: David Awogbemila <[email protected]>
Acked-by: Willem de Brujin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 839102ea6aa1..d6e35421d8f7 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -180,7 +180,7 @@ static int gve_napi_poll(struct napi_struct *napi, int budget)
/* Double check we have no extra work.
* Ensure unmask synchronizes with checking for work.
*/
- dma_rmb();
+ mb();
if (block->tx)
reschedule |= gve_tx_poll(block, -1);
if (block->rx)
--
2.30.2
From: Julian Wiedmann <[email protected]>
[ Upstream commit 444d7be9532dcfda8e0385226c862fd7e986f607 ]
If the device_add() for a smcd_dev fails, there's no cleanup step that
rolls back the earlier list_add(). The device subsequently gets freed,
and we end up with a corrupted list.
Add some error handling that removes the device from the list.
Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/smc_ism.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c
index 024ca21392f7..8e33c0128d73 100644
--- a/net/smc/smc_ism.c
+++ b/net/smc/smc_ism.c
@@ -331,6 +331,8 @@ EXPORT_SYMBOL_GPL(smcd_alloc_dev);
int smcd_register_dev(struct smcd_dev *smcd)
{
+ int rc;
+
mutex_lock(&smcd_dev_list.mutex);
if (list_empty(&smcd_dev_list.list)) {
u8 *system_eid = NULL;
@@ -350,7 +352,14 @@ int smcd_register_dev(struct smcd_dev *smcd)
dev_name(&smcd->dev), smcd->pnetid,
smcd->pnetid_by_user ? " (user defined)" : "");
- return device_add(&smcd->dev);
+ rc = device_add(&smcd->dev);
+ if (rc) {
+ mutex_lock(&smcd_dev_list.mutex);
+ list_del(&smcd->list);
+ mutex_unlock(&smcd_dev_list.mutex);
+ }
+
+ return rc;
}
EXPORT_SYMBOL_GPL(smcd_register_dev);
--
2.30.2
From: Andy Gospodarek <[email protected]>
[ Upstream commit ab21494be9dc7d62736c5fcd06be65d49df713ee ]
Otherwise, some of the recently added HyperV VF IDs would not be
recognized as VF devices and they would not initialize properly.
Fixes: 7fbf359bb2c1 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.")
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 4385b42a2b63..ff86324c7fb8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -280,7 +280,8 @@ static bool bnxt_vf_pciid(enum board_idx idx)
{
return (idx == NETXTREME_C_VF || idx == NETXTREME_E_VF ||
idx == NETXTREME_S_VF || idx == NETXTREME_C_VF_HV ||
- idx == NETXTREME_E_VF_HV || idx == NETXTREME_E_P5_VF);
+ idx == NETXTREME_E_VF_HV || idx == NETXTREME_E_P5_VF ||
+ idx == NETXTREME_E_P5_VF_HV);
}
#define DB_CP_REARM_FLAGS (DB_KEY_CP | DB_IDX_VALID)
--
2.30.2
From: David Awogbemila <[email protected]>
[ Upstream commit fbd4a28b4fa66faaa7f510c0adc531d37e0a7848 ]
SKBs with skb_get_queue_mapping(skb) == tx_cfg.num_queues should also be
considered invalid.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <[email protected]>
Acked-by: Willem de Brujin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/google/gve/gve_tx.c b/drivers/net/ethernet/google/gve/gve_tx.c
index 30532ee28dd3..b653197b34d1 100644
--- a/drivers/net/ethernet/google/gve/gve_tx.c
+++ b/drivers/net/ethernet/google/gve/gve_tx.c
@@ -482,7 +482,7 @@ netdev_tx_t gve_tx(struct sk_buff *skb, struct net_device *dev)
struct gve_tx_ring *tx;
int nsegs;
- WARN(skb_get_queue_mapping(skb) > priv->tx_cfg.num_queues,
+ WARN(skb_get_queue_mapping(skb) >= priv->tx_cfg.num_queues,
"skb queue index out of range");
tx = &priv->tx[skb_get_queue_mapping(skb)];
if (unlikely(gve_maybe_stop_tx(tx, skb))) {
--
2.30.2
From: Subbaraman Narayanamurthy <[email protected]>
[ Upstream commit a00593737f8bac2c9e97b696e7ff84a4446653e8 ]
Add a missing of_node_put() in of_bcm_voter_get() to avoid the
reference leak.
Signed-off-by: Subbaraman Narayanamurthy <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/interconnect/qcom/bcm-voter.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
index 887d13721e52..7c3ef817e99c 100644
--- a/drivers/interconnect/qcom/bcm-voter.c
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
*/
#include <asm/div64.h>
@@ -212,6 +212,7 @@ struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name)
}
mutex_unlock(&bcm_voter_lock);
+ of_node_put(node);
return voter;
}
EXPORT_SYMBOL_GPL(of_bcm_voter_get);
--
2.30.2
From: Jiaran Zhang <[email protected]>
[ Upstream commit a710b9ffbebaf713f7dbd4dbd9524907e5d66f33 ]
In hclge_mbx_handler(), if there are two consecutive mailbox
messages that requires resp_msg, the resp_msg is not cleared
after processing the first message, which will cause the resp_msg
data of second message incorrect.
Fix it by clearing the resp_msg before processing every mailbox
message.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jiaran Zhang <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index e0254672831f..2c2d53f5c56e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -678,7 +678,6 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
unsigned int flag;
int ret = 0;
- memset(&resp_msg, 0, sizeof(resp_msg));
/* handle all the mailbox requests in the queue */
while (!hclge_cmd_crq_empty(&hdev->hw)) {
if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) {
@@ -706,6 +705,9 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
trace_hclge_pf_mbx_get(hdev, req);
+ /* clear the resp_msg before processing every mailbox message */
+ memset(&resp_msg, 0, sizeof(resp_msg));
+
switch (req->msg.code) {
case HCLGE_MBX_MAP_RING_TO_VECTOR:
ret = hclge_map_unmap_ring_to_vf_vector(vport, true,
--
2.30.2
From: Lu Baolu <[email protected]>
[ Upstream commit 54c80d907400189b09548039be8f3b6e297e8ae3 ]
When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Jacob Pan <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel/iommu.c | 7 +++++--
drivers/iommu/intel/pasid.c | 3 ++-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index eececdeaa40f..b21c8224b1c8 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -2606,9 +2606,9 @@ static int domain_setup_first_level(struct intel_iommu *iommu,
struct device *dev,
u32 pasid)
{
- int flags = PASID_FLAG_SUPERVISOR_MODE;
struct dma_pte *pgd = domain->pgd;
int agaw, level;
+ int flags = 0;
/*
* Skip top levels of page tables for iommu which has
@@ -2624,7 +2624,10 @@ static int domain_setup_first_level(struct intel_iommu *iommu,
if (level != 4 && level != 5)
return -EINVAL;
- flags |= (level == 5) ? PASID_FLAG_FL5LP : 0;
+ if (pasid != PASID_RID2PASID)
+ flags |= PASID_FLAG_SUPERVISOR_MODE;
+ if (level == 5)
+ flags |= PASID_FLAG_FL5LP;
if (domain->domain.type == IOMMU_DOMAIN_UNMANAGED)
flags |= PASID_FLAG_PAGE_SNOOP;
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index ce4ef2d245e3..1e7c17989084 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -677,7 +677,8 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
* Since it is a second level only translation setup, we should
* set SRE bit as well (addresses are expected to be GPAs).
*/
- pasid_set_sre(pte);
+ if (pasid != PASID_RID2PASID)
+ pasid_set_sre(pte);
pasid_set_present(pte);
pasid_flush_caches(iommu, pte, pasid, did);
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 31db0dbd72444abe645d90c20ecb84d668f5af5e ]
In current kernels, small allocations never actually fail so this
patch shouldn't affect runtime.
Originally this error handling code written with the idea that if
the "serial->tiocmget" allocation failed, then we would continue
operating instead of bailing out early. But in later years we added
an unchecked dereference on the next line.
serial->tiocmget->serial_state_notification = kzalloc();
^^^^^^^^^^^^^^^^^^
Since these allocations are never going fail in real life, this is
mostly a philosophical debate, but I think bailing out early is the
correct behavior that the user would want. And generally it's safer to
bail as soon an error happens.
Fixes: af0de1303c4e ("usb: hso: obey DMA rules in tiocmget")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/hso.c | 37 ++++++++++++++++++-------------------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 01566e4d2003..88f87787833c 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2618,29 +2618,28 @@ static struct hso_device *hso_create_bulk_serial_device(
num_urbs = 2;
serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
GFP_KERNEL);
+ if (!serial->tiocmget)
+ goto exit;
serial->tiocmget->serial_state_notification
= kzalloc(sizeof(struct hso_serial_state_notification),
GFP_KERNEL);
- /* it isn't going to break our heart if serial->tiocmget
- * allocation fails don't bother checking this.
- */
- if (serial->tiocmget && serial->tiocmget->serial_state_notification) {
- tiocmget = serial->tiocmget;
- tiocmget->endp = hso_get_ep(interface,
- USB_ENDPOINT_XFER_INT,
- USB_DIR_IN);
- if (!tiocmget->endp) {
- dev_err(&interface->dev, "Failed to find INT IN ep\n");
- goto exit;
- }
-
- tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (tiocmget->urb) {
- mutex_init(&tiocmget->mutex);
- init_waitqueue_head(&tiocmget->waitq);
- } else
- hso_free_tiomget(serial);
+ if (!serial->tiocmget->serial_state_notification)
+ goto exit;
+ tiocmget = serial->tiocmget;
+ tiocmget->endp = hso_get_ep(interface,
+ USB_ENDPOINT_XFER_INT,
+ USB_DIR_IN);
+ if (!tiocmget->endp) {
+ dev_err(&interface->dev, "Failed to find INT IN ep\n");
+ goto exit;
}
+
+ tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (tiocmget->urb) {
+ mutex_init(&tiocmget->mutex);
+ init_waitqueue_head(&tiocmget->waitq);
+ } else
+ hso_free_tiomget(serial);
}
else
num_urbs = 1;
--
2.30.2
From: Jian Shen <[email protected]>
[ Upstream commit a289a7e5c1d49b7d47df9913c1cc81fb48fab613 ]
Currently, the netdevice is registered before client initializing
complete. So there is a timewindow between netdevice available
and usable. In this case, if user try to change the channel number
or ring param, it may cause the hns3_set_rx_cpu_rmap() being called
twice, and report bug.
[47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0
[47199.430340] hns3 0000:35:00.0 eth1: already uninitialized
[47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1
[47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1
[47200.163524] ------------[ cut here ]------------
[47200.171674] kernel BUG at lib/cpu_rmap.c:142!
[47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge]
[47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1
[47200.215601] Hardware name: , xxxxxx 02/04/2021
[47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[47200.230188] pc : cpu_rmap_add+0x38/0x40
[47200.237472] lr : irq_cpu_rmap_add+0x84/0x140
[47200.243291] sp : ffff800010e93a30
[47200.247295] x29: ffff800010e93a30 x28: ffff082100584880
[47200.254155] x27: 0000000000000000 x26: 0000000000000000
[47200.260712] x25: 0000000000000000 x24: 0000000000000004
[47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0
[47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680
[47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0
[47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0
[47200.293456] x15: fffffc2082990600 x14: dead000000000122
[47200.300059] x13: ffffffffffffffff x12: 000000000000003e
[47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000
[47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700
[47200.319682] x7 : 0000000000000000 x6 : 000000000000003f
[47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20
[47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80
[47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004
[47200.346058] Call trace:
[47200.349324] cpu_rmap_add+0x38/0x40
[47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3]
[47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3]
[47200.370049] hns3_change_channels+0x40/0xb0 [hns3]
[47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3]
[47200.383353] ethtool_set_channels+0x140/0x250
[47200.389772] dev_ethtool+0x714/0x23d0
[47200.394440] dev_ioctl+0x4cc/0x640
[47200.399277] sock_do_ioctl+0x100/0x2a0
[47200.404574] sock_ioctl+0x28c/0x470
[47200.409079] __arm64_sys_ioctl+0xb4/0x100
[47200.415217] el0_svc_common.constprop.0+0x84/0x210
[47200.422088] do_el0_svc+0x28/0x34
[47200.426387] el0_svc+0x28/0x70
[47200.431308] el0_sync_handler+0x1a4/0x1b0
[47200.436477] el0_sync+0x174/0x180
[47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000)
[47200.448869] ---[ end trace a01efe4ce42e5f34 ]---
The process is like below:
excuting hns3_client_init
|
register_netdev()
| hns3_set_channels()
| |
hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet()
| |
| quit without calling function
| hns3_free_rx_cpu_rmap for flag
| HNS3_NIC_STATE_INITED is unset.
| |
| hns3_reset_notify_init_enet()
| |
set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash
Fix it by calling register_netdev() at the end of function
hns3_client_init().
Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index ef3148919970..25fcb624ac20 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4113,12 +4113,6 @@ static int hns3_client_init(struct hnae3_handle *handle)
if (ret)
goto out_init_phy;
- ret = register_netdev(netdev);
- if (ret) {
- dev_err(priv->dev, "probe register netdev fail!\n");
- goto out_reg_netdev_fail;
- }
-
/* the device can work without cpu rmap, only aRFS needs it */
ret = hns3_set_rx_cpu_rmap(netdev);
if (ret)
@@ -4146,17 +4140,23 @@ static int hns3_client_init(struct hnae3_handle *handle)
set_bit(HNS3_NIC_STATE_INITED, &priv->state);
+ ret = register_netdev(netdev);
+ if (ret) {
+ dev_err(priv->dev, "probe register netdev fail!\n");
+ goto out_reg_netdev_fail;
+ }
+
if (netif_msg_drv(handle))
hns3_info_show(priv);
return ret;
+out_reg_netdev_fail:
+ hns3_dbg_uninit(handle);
out_client_start:
hns3_free_rx_cpu_rmap(netdev);
hns3_nic_uninit_irq(priv);
out_init_irq_fail:
- unregister_netdev(netdev);
-out_reg_netdev_fail:
hns3_uninit_phy(netdev);
out_init_phy:
hns3_uninit_all_ring(priv);
--
2.30.2
From: Bixuan Cui <[email protected]>
[ Upstream commit 382d91fc0f4f1b13f8a0dcbf7145f4f175b71a18 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Bixuan Cui <[email protected]>
Fixes: fa4afd78ea12 ("iommu/virtio: Build virtio-iommu as module")
Reviewed-by: Jean-Philippe Brucker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/virtio-iommu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index 2bfdd5734844..81dea4caf561 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -1138,6 +1138,7 @@ static struct virtio_device_id id_table[] = {
{ VIRTIO_ID_IOMMU, VIRTIO_DEV_ANY_ID },
{ 0 },
};
+MODULE_DEVICE_TABLE(virtio, id_table);
static struct virtio_driver virtio_iommu_drv = {
.driver.name = KBUILD_MODNAME,
--
2.30.2
From: Michael Chan <[email protected]>
[ Upstream commit 702279d2ce4650000bb6302013630304e359dc13 ]
There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in
bnxt_hwrm_set_pg_attr(). Fix it and make the code more understandable
with a new macro BNXT_SET_CTX_PAGE_ATTR().
Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.")
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +--------
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 10 ++++++++++
2 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index ff86324c7fb8..adfaa9a850dd 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6834,14 +6834,7 @@ ctx_err:
static void bnxt_hwrm_set_pg_attr(struct bnxt_ring_mem_info *rmem, u8 *pg_attr,
__le64 *pg_dir)
{
- u8 pg_size = 0;
-
- if (BNXT_PAGE_SHIFT == 13)
- pg_size = 1 << 4;
- else if (BNXT_PAGE_SIZE == 16)
- pg_size = 2 << 4;
-
- *pg_attr = pg_size;
+ BNXT_SET_CTX_PAGE_ATTR(*pg_attr);
if (rmem->depth >= 1) {
if (rmem->depth == 2)
*pg_attr |= 2;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index e4e926c65118..a95c5afa2f01 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1440,6 +1440,16 @@ struct bnxt_ctx_pg_info {
#define BNXT_MAX_TQM_RINGS \
(BNXT_MAX_TQM_SP_RINGS + BNXT_MAX_TQM_FP_RINGS)
+#define BNXT_SET_CTX_PAGE_ATTR(attr) \
+do { \
+ if (BNXT_PAGE_SIZE == 0x2000) \
+ attr = FUNC_BACKING_STORE_CFG_REQ_SRQ_PG_SIZE_PG_8K; \
+ else if (BNXT_PAGE_SIZE == 0x10000) \
+ attr = FUNC_BACKING_STORE_CFG_REQ_QPC_PG_SIZE_PG_64K; \
+ else \
+ attr = FUNC_BACKING_STORE_CFG_REQ_QPC_PG_SIZE_PG_4K; \
+} while (0)
+
struct bnxt_ctx_mem_info {
u32 qp_max_entries;
u16 qp_min_qp1_entries;
--
2.30.2
From: Raju Rangoju <[email protected]>
[ Upstream commit 88c380df84fbd03f9b137c2b9d0a44b9f2f553b0 ]
Hardware register having the server TID base can contain
invalid values when adapter is in bad state (for example,
due to AER fatal error). Reading these invalid values in the
register can lead to out-of-bound memory access. So, fix
by using the saved server TID base when clearing filters.
Fixes: b1a79360ee86 ("cxgb4: Delete all hash and TCAM filters before resource cleanup")
Signed-off-by: Raju Rangoju <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
index bde8494215c4..e664e05b9f02 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
@@ -1042,7 +1042,7 @@ void clear_all_filters(struct adapter *adapter)
cxgb4_del_filter(dev, f->tid, &f->fs);
}
- sb = t4_read_reg(adapter, LE_DB_SRVR_START_INDEX_A);
+ sb = adapter->tids.stid_base;
for (i = 0; i < sb; i++) {
f = (struct filter_entry *)adapter->tids.tid_tab[i];
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit e0112a7c9e847ada15a631b88e279d547e8f26a7 ]
The _nbu2ss_ep_done() function calls:
list_del_init(&req->queue);
which means that the loop will never exit.
Fixes: ca3d253eb967 ("Staging: emxx_udc: Iterate list using list_for_each_entry")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/emxx_udc/emxx_udc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index a30b4f5b199b..3897f8e8f5e0 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -2062,7 +2062,7 @@ static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
struct nbu2ss_ep *ep,
int status)
{
- struct nbu2ss_req *req;
+ struct nbu2ss_req *req, *n;
/* Endpoint Disable */
_nbu2ss_epn_exit(udc, ep);
@@ -2074,7 +2074,7 @@ static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
return 0;
/* called with irqs blocked */
- list_for_each_entry(req, &ep->queue, queue) {
+ list_for_each_entry_safe(req, n, &ep->queue, queue) {
_nbu2ss_ep_done(ep, req, status);
}
--
2.30.2
From: Alex Elder <[email protected]>
[ Upstream commit 440c3247cba3d9433ac435d371dd7927d68772a7 ]
IPA configuration data includes an array of memory region
descriptors. That was a fixed-size array at one time, but
at some point we started defining it such that it was only
as big as required for a given platform. The actual number
of entries in the array is recorded in the configuration data
along with the array.
A loop in ipa_mem_config() still assumes the array has entries
for all defined memory region IDs. As a result, this loop can
go past the end of the actual array and attempt to write
"canary" values based on nonsensical data.
Fix this, by stashing the number of entries in the array, and
using that rather than IPA_MEM_COUNT in the initialization loop
found in ipa_mem_config().
The only remaining use of IPA_MEM_COUNT is in a validation check
to ensure configuration data doesn't have too many entries.
That's fine for now.
Fixes: 3128aae8c439a ("net: ipa: redefine struct ipa_mem_data")
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ipa/ipa.h | 2 ++
drivers/net/ipa/ipa_mem.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ipa/ipa.h b/drivers/net/ipa/ipa.h
index 6c2371084c55..da862db09d7b 100644
--- a/drivers/net/ipa/ipa.h
+++ b/drivers/net/ipa/ipa.h
@@ -56,6 +56,7 @@ enum ipa_flag {
* @mem_virt: Virtual address of IPA-local memory space
* @mem_offset: Offset from @mem_virt used for access to IPA memory
* @mem_size: Total size (bytes) of memory at @mem_virt
+ * @mem_count: Number of entries in the mem array
* @mem: Array of IPA-local memory region descriptors
* @imem_iova: I/O virtual address of IPA region in IMEM
* @imem_size; Size of IMEM region
@@ -102,6 +103,7 @@ struct ipa {
void *mem_virt;
u32 mem_offset;
u32 mem_size;
+ u32 mem_count;
const struct ipa_mem *mem;
unsigned long imem_iova;
diff --git a/drivers/net/ipa/ipa_mem.c b/drivers/net/ipa/ipa_mem.c
index 2d45c444a67f..a78d66051a17 100644
--- a/drivers/net/ipa/ipa_mem.c
+++ b/drivers/net/ipa/ipa_mem.c
@@ -181,7 +181,7 @@ int ipa_mem_config(struct ipa *ipa)
* for the region, write "canary" values in the space prior to
* the region's base address.
*/
- for (mem_id = 0; mem_id < IPA_MEM_COUNT; mem_id++) {
+ for (mem_id = 0; mem_id < ipa->mem_count; mem_id++) {
const struct ipa_mem *mem = &ipa->mem[mem_id];
u16 canary_count;
__le32 *canary;
@@ -488,6 +488,7 @@ int ipa_mem_init(struct ipa *ipa, const struct ipa_mem_data *mem_data)
ipa->mem_size = resource_size(res);
/* The ipa->mem[] array is indexed by enum ipa_mem_id values */
+ ipa->mem_count = mem_data->local_count;
ipa->mem = mem_data->local;
ret = ipa_imem_init(ipa, mem_data->imem_addr, mem_data->imem_size);
--
2.30.2
From: David Awogbemila <[email protected]>
[ Upstream commit 5218e919c8d06279884aa0baf76778a6817d5b93 ]
When freeing notification blocks, we index priv->msix_vectors.
If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors)
this could lead to a NULL pointer dereference if the driver is unloaded.
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: David Awogbemila <[email protected]>
Acked-by: Willem de Brujin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_main.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index a8fcf1227391..839102ea6aa1 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -301,20 +301,22 @@ static void gve_free_notify_blocks(struct gve_priv *priv)
{
int i;
- /* Free the irqs */
- for (i = 0; i < priv->num_ntfy_blks; i++) {
- struct gve_notify_block *block = &priv->ntfy_blocks[i];
- int msix_idx = i;
-
- irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector,
- NULL);
- free_irq(priv->msix_vectors[msix_idx].vector, block);
+ if (priv->msix_vectors) {
+ /* Free the irqs */
+ for (i = 0; i < priv->num_ntfy_blks; i++) {
+ struct gve_notify_block *block = &priv->ntfy_blocks[i];
+ int msix_idx = i;
+
+ irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector,
+ NULL);
+ free_irq(priv->msix_vectors[msix_idx].vector, block);
+ }
+ free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
}
dma_free_coherent(&priv->pdev->dev,
priv->num_ntfy_blks * sizeof(*priv->ntfy_blocks),
priv->ntfy_blocks, priv->ntfy_block_bus);
priv->ntfy_blocks = NULL;
- free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
pci_disable_msix(priv->pdev);
kvfree(priv->msix_vectors);
priv->msix_vectors = NULL;
--
2.30.2
From: David Awogbemila <[email protected]>
[ Upstream commit e96b491a0ffa35a8a9607c193fa4d894ca9fb32f ]
If we do not get the expected number of vectors from
pci_enable_msix_range, we update priv->num_ntfy_blks but not
priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx
is updated accordingly.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 02e7d74779f4..a8fcf1227391 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -220,6 +220,7 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
int vecs_left = new_num_ntfy_blks % 2;
priv->num_ntfy_blks = new_num_ntfy_blks;
+ priv->mgmt_msix_idx = priv->num_ntfy_blks;
priv->tx_cfg.max_queues = min_t(int, priv->tx_cfg.max_queues,
vecs_per_type);
priv->rx_cfg.max_queues = min_t(int, priv->rx_cfg.max_queues,
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 0fad605fb0bdc00d8ad78696300ff2fbdee6e048 ]
cs42l42 does not support standard burst transfers so the use_single_read
and use_single_write flags must be set in the regmap config.
Because of this bug, the patch:
commit 0a0eb567e1d4 ("ASoC: cs42l42: Minor error paths fixups")
broke cs42l42 probe() because without the use_single_* flags it causes
regmap to issue a burst read.
However, the missing use_single_* could cause problems anyway because the
regmap cache can attempt burst transfers if these flags are not set.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 4d82d24c7828..7c6b10bc0b8c 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -398,6 +398,9 @@ static const struct regmap_config cs42l42_regmap = {
.reg_defaults = cs42l42_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(cs42l42_reg_defaults),
.cache_type = REGCACHE_RBTREE,
+
+ .use_single_read = true,
+ .use_single_write = true,
};
static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit 1fd86e280d8b21762901e43d42d66dbfe8b8e0d3 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/interconnect/qcom/bcm-voter.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
index 7c3ef817e99c..dd0e3bd50b94 100644
--- a/drivers/interconnect/qcom/bcm-voter.c
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -370,6 +370,7 @@ static const struct of_device_id bcm_voter_of_match[] = {
{ .compatible = "qcom,bcm-voter" },
{ }
};
+MODULE_DEVICE_TABLE(of, bcm_voter_of_match);
static struct platform_driver qcom_icc_bcm_voter_driver = {
.probe = qcom_icc_bcm_voter_probe,
--
2.30.2
From: Joakim Zhang <[email protected]>
[ Upstream commit 576f9eacc680d2b1f37e8010cff62f7b227ea769 ]
Both get and set WoL will check device_can_wakeup(), if MAC supports PMT, it
will set device wakeup capability. After commit 1d8e5b0f3f2c ("net: stmmac:
Support WOL with phy"), device wakeup capability will be overwrite in
stmmac_init_phy() according to phy's Wol feature. If phy doesn't support WoL,
then MAC will lose wakeup capability. To fix this issue, only overwrite device
wakeup capability when MAC doesn't support PMT.
For STMMAC now driver checks MAC's WoL capability if MAC supports PMT, if
not support, driver will check PHY's WoL capability.
Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy")
Reviewed-by: Jisheng Zhang <[email protected]>
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4374ce4671ad..3134f7e669f8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1052,7 +1052,6 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
*/
static int stmmac_init_phy(struct net_device *dev)
{
- struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
struct stmmac_priv *priv = netdev_priv(dev);
struct device_node *node;
int ret;
@@ -1078,8 +1077,12 @@ static int stmmac_init_phy(struct net_device *dev)
ret = phylink_connect_phy(priv->phylink, phydev);
}
- phylink_ethtool_get_wol(priv->phylink, &wol);
- device_set_wakeup_capable(priv->device, !!wol.supported);
+ if (!priv->plat->pmt) {
+ struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+
+ phylink_ethtool_get_wol(priv->phylink, &wol);
+ device_set_wakeup_capable(priv->device, !!wol.supported);
+ }
return ret;
}
--
2.30.2
From: Eric Farman <[email protected]>
[ Upstream commit c6c82e0cd8125d30f2f1b29205c7e1a2f1a6785b ]
We have a really nice flag in the channel_program struct that
indicates if it had been initialized by cp_init(), and use it
as a guard in the other cp accessor routines, but not for a
duplicate call into cp_init(). The possibility of this occurring
is low, because that flow is protected by the private->io_mutex
and FSM CP_PROCESSING state. But then why bother checking it
in (for example) cp_prefetch() then?
Let's just be consistent and check for that in cp_init() too.
Fixes: 71189f263f8a3 ("vfio-ccw: make it safe to access channel programs")
Signed-off-by: Eric Farman <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Acked-by: Matthew Rosato <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/vfio_ccw_cp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index b9febc581b1f..8d1b2771c1aa 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -638,6 +638,10 @@ int cp_init(struct channel_program *cp, struct device *mdev, union orb *orb)
static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 1);
int ret;
+ /* this is an error in the caller */
+ if (cp->initialized)
+ return -EBUSY;
+
/*
* We only support prefetching the channel program. We assume all channel
* programs executed by supported guests likewise support prefetching.
--
2.30.2
From: Paolo Abeni <[email protected]>
[ Upstream commit 098116e7e640ba677d9e345cbee83d253c13d556 ]
If the owing socket is shutting down - e.g. the sock reference
count already dropped to 0 and only sk_wmem_alloc is keeping
the sock alive, skb_orphan_partial() becomes a no-op.
When forwarding packets over veth with GRO enabled, the above
causes refcount errors.
This change addresses the issue with a plain skb_orphan() call
in the critical scenario.
Fixes: 9adc89af724f ("net: let skb_orphan_partial wake-up waiters.")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/sock.h | 4 +++-
net/core/sock.c | 8 ++++----
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index 261195598df3..f68184b8c0aa 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2197,13 +2197,15 @@ static inline void skb_set_owner_r(struct sk_buff *skb, struct sock *sk)
sk_mem_charge(sk, skb->truesize);
}
-static inline void skb_set_owner_sk_safe(struct sk_buff *skb, struct sock *sk)
+static inline __must_check bool skb_set_owner_sk_safe(struct sk_buff *skb, struct sock *sk)
{
if (sk && refcount_inc_not_zero(&sk->sk_refcnt)) {
skb_orphan(skb);
skb->destructor = sock_efree;
skb->sk = sk;
+ return true;
}
+ return false;
}
void sk_reset_timer(struct sock *sk, struct timer_list *timer,
diff --git a/net/core/sock.c b/net/core/sock.c
index c75c1e723a84..dee29f41beaf 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2099,10 +2099,10 @@ void skb_orphan_partial(struct sk_buff *skb)
if (skb_is_tcp_pure_ack(skb))
return;
- if (can_skb_orphan_partial(skb))
- skb_set_owner_sk_safe(skb, skb->sk);
- else
- skb_orphan(skb);
+ if (can_skb_orphan_partial(skb) && skb_set_owner_sk_safe(skb, skb->sk))
+ return;
+
+ skb_orphan(skb);
}
EXPORT_SYMBOL(skb_orphan_partial);
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit 6b69546912a57ff8c31061f98e56383cc0beffd3 ]
Currently GPIO CS handling, when descriptors are in use, doesn't
take into consideration that in ACPI case the default polarity
is Active High and can't be altered. Instead we have to use the
per-chip definition provided by SPISerialBus() resource.
Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: Liguang Zhang <[email protected]>
Cc: Jay Fang <[email protected]>
Cc: Sven Van Asbroeck <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Tested-by: Xin Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 419de3d40481..a6f1e94af13c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -814,16 +814,29 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio)) {
if (!(spi->mode & SPI_NO_CS)) {
- if (spi->cs_gpiod)
- /* polarity handled by gpiolib */
- gpiod_set_value_cansleep(spi->cs_gpiod,
- enable1);
- else
+ if (spi->cs_gpiod) {
+ /*
+ * Historically ACPI has no means of the GPIO polarity and
+ * thus the SPISerialBus() resource defines it on the per-chip
+ * basis. In order to avoid a chain of negations, the GPIO
+ * polarity is considered being Active High. Even for the cases
+ * when _DSD() is involved (in the updated versions of ACPI)
+ * the GPIO CS polarity must be defined Active High to avoid
+ * ambiguity. That's why we use enable, that takes SPI_CS_HIGH
+ * into account.
+ */
+ if (has_acpi_companion(&spi->dev))
+ gpiod_set_value_cansleep(spi->cs_gpiod, !enable);
+ else
+ /* Polarity handled by GPIO library */
+ gpiod_set_value_cansleep(spi->cs_gpiod, enable1);
+ } else {
/*
* invert the enable line, as active low is
* default for SPI.
*/
gpio_set_value_cansleep(spi->cs_gpio, !enable);
+ }
}
/* Some SPI masters need both GPIO CS & slave_select */
if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ]
'ret' is known to be 0 here.
The expected error code is stored in 'tx_pipe->dma_queue', so use it
instead.
While at it, switch from %d to %pe which is more user friendly.
Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/netcp_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index d7a144b4a09f..dc50e948195d 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1350,8 +1350,8 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
tx_pipe->dma_queue = knav_queue_open(name, tx_pipe->dma_queue_id,
KNAV_QUEUE_SHARED);
if (IS_ERR(tx_pipe->dma_queue)) {
- dev_err(dev, "Could not open DMA queue for channel \"%s\": %d\n",
- name, ret);
+ dev_err(dev, "Could not open DMA queue for channel \"%s\": %pe\n",
+ name, tx_pipe->dma_queue);
ret = PTR_ERR(tx_pipe->dma_queue);
goto err;
}
--
2.30.2
From: Yinjun Zhang <[email protected]>
[ Upstream commit ceb11679d9fcf3fdb358a310a38760fcbe9b63ed ]
Commit 4976b718c355 ("bpf: Introduce pseudo_btf_id") switched the
order of resolve_pseudo_ldimm(), in which some pseudo instructions
are rewritten. Thus those rewritten instructions cannot be passed
to driver via 'prepare' offload callback.
Reorder the 'prepare' offload callback to fix it.
Fixes: 4976b718c355 ("bpf: Introduce pseudo_btf_id")
Signed-off-by: Yinjun Zhang <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 364b9760d1a7..4f50d6f128be 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -12364,12 +12364,6 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr,
if (is_priv)
env->test_state_freq = attr->prog_flags & BPF_F_TEST_STATE_FREQ;
- if (bpf_prog_is_dev_bound(env->prog->aux)) {
- ret = bpf_prog_offload_verifier_prep(env->prog);
- if (ret)
- goto skip_full_check;
- }
-
env->explored_states = kvcalloc(state_htab_size(env),
sizeof(struct bpf_verifier_state_list *),
GFP_USER);
@@ -12393,6 +12387,12 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr,
if (ret < 0)
goto skip_full_check;
+ if (bpf_prog_is_dev_bound(env->prog->aux)) {
+ ret = bpf_prog_offload_verifier_prep(env->prog);
+ if (ret)
+ goto skip_full_check;
+ }
+
ret = check_cfg(env);
if (ret < 0)
goto skip_full_check;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
There is a build warning using gcc-11 showing a mis-match in the .h and .c
definitions of intel_dp_get_link_status():
CC [M] drivers/gpu/drm/i915/display/intel_dp.o
drivers/gpu/drm/i915/display/intel_dp.c:4139:56: warning: argument 2 of type ‘u8[6]’ {aka ‘unsigned char[6]’} with mismatched bound [-Warray-parameter=]
4139 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STATUS_SIZE])
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/display/intel_dp.c:51:
drivers/gpu/drm/i915/display/intel_dp.h:105:57: note: previously declared as ‘u8 *’ {aka ‘unsigned char *’}
105 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status);
| ~~~~^~~~~~~~~~~
This was fixed accidentally commit b30edfd8d0b4 ("drm/i915: Switch to LTTPR
non-transparent mode link training") by getting rid of the function entirely,
but that is not a viable backport for a stable kernel, so just fix up the
function definition to remove the build warning entirely. There is no
functional change for this, and it fixes up one of the last 'make allmodconfig'
build warnings when using gcc-11 on this kernel tree.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -4136,7 +4136,7 @@ static void chv_dp_post_pll_disable(stru
* link status information
*/
bool
-intel_dp_get_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STATUS_SIZE])
+intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status)
{
return drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS, link_status,
DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
From: Randy Dunlap <[email protected]>
[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]
rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.
ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!
Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: John Crispin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/ralink/of.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index cbae9d23ab7f..a971f1aca096 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -8,6 +8,7 @@
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/sizes.h>
#include <linux/of_fdt.h>
@@ -25,6 +26,7 @@
__iomem void *rt_sysc_membase;
__iomem void *rt_memc_membase;
+EXPORT_SYMBOL_GPL(rt_sysc_membase);
__iomem void *plat_of_remap_node(const char *node)
{
--
2.30.2
From: George McCollister <[email protected]>
[ Upstream commit 48b491a5cc74333c4a6a82fe21cea42c055a3b0b ]
Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
if (skb->mac_len < sizeof(struct hsr_ethhdr))
return -EINVAL;
mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.
Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.
Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info")
Signed-off-by: George McCollister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/hsr/hsr_device.c | 2 ++
net/hsr/hsr_forward.c | 30 +++++++++++++++++++++---------
net/hsr/hsr_forward.h | 8 ++++----
net/hsr/hsr_main.h | 4 ++--
net/hsr/hsr_slave.c | 11 +++++------
5 files changed, 34 insertions(+), 21 deletions(-)
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index 6f4c34b6a5d6..fec1b014c0a2 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -218,6 +218,7 @@ static netdev_tx_t hsr_dev_xmit(struct sk_buff *skb, struct net_device *dev)
if (master) {
skb->dev = master->dev;
skb_reset_mac_header(skb);
+ skb_reset_mac_len(skb);
hsr_forward_skb(skb, master);
} else {
atomic_long_inc(&dev->tx_dropped);
@@ -261,6 +262,7 @@ static struct sk_buff *hsr_init_skb(struct hsr_port *master, u16 proto)
goto out;
skb_reset_mac_header(skb);
+ skb_reset_mac_len(skb);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index 90c72e4c0a8f..baf4765be6d7 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -451,25 +451,31 @@ static void handle_std_frame(struct sk_buff *skb,
}
}
-void hsr_fill_frame_info(__be16 proto, struct sk_buff *skb,
- struct hsr_frame_info *frame)
+int hsr_fill_frame_info(__be16 proto, struct sk_buff *skb,
+ struct hsr_frame_info *frame)
{
if (proto == htons(ETH_P_PRP) ||
proto == htons(ETH_P_HSR)) {
+ /* Check if skb contains hsr_ethhdr */
+ if (skb->mac_len < sizeof(struct hsr_ethhdr))
+ return -EINVAL;
+
/* HSR tagged frame :- Data or Supervision */
frame->skb_std = NULL;
frame->skb_prp = NULL;
frame->skb_hsr = skb;
frame->sequence_nr = hsr_get_skb_sequence_nr(skb);
- return;
+ return 0;
}
/* Standard frame or PRP from master port */
handle_std_frame(skb, frame);
+
+ return 0;
}
-void prp_fill_frame_info(__be16 proto, struct sk_buff *skb,
- struct hsr_frame_info *frame)
+int prp_fill_frame_info(__be16 proto, struct sk_buff *skb,
+ struct hsr_frame_info *frame)
{
/* Supervision frame */
struct prp_rct *rct = skb_get_PRP_rct(skb);
@@ -480,9 +486,11 @@ void prp_fill_frame_info(__be16 proto, struct sk_buff *skb,
frame->skb_std = NULL;
frame->skb_prp = skb;
frame->sequence_nr = prp_get_skb_sequence_nr(rct);
- return;
+ return 0;
}
handle_std_frame(skb, frame);
+
+ return 0;
}
static int fill_frame_info(struct hsr_frame_info *frame,
@@ -492,9 +500,10 @@ static int fill_frame_info(struct hsr_frame_info *frame,
struct hsr_vlan_ethhdr *vlan_hdr;
struct ethhdr *ethhdr;
__be16 proto;
+ int ret;
- /* Check if skb contains hsr_ethhdr */
- if (skb->mac_len < sizeof(struct hsr_ethhdr))
+ /* Check if skb contains ethhdr */
+ if (skb->mac_len < sizeof(struct ethhdr))
return -EINVAL;
memset(frame, 0, sizeof(*frame));
@@ -521,7 +530,10 @@ static int fill_frame_info(struct hsr_frame_info *frame,
frame->is_from_san = false;
frame->port_rcv = port;
- hsr->proto_ops->fill_frame_info(proto, skb, frame);
+ ret = hsr->proto_ops->fill_frame_info(proto, skb, frame);
+ if (ret)
+ return ret;
+
check_local_dest(port->hsr, skb, frame);
return 0;
diff --git a/net/hsr/hsr_forward.h b/net/hsr/hsr_forward.h
index 618140d484ad..008f45786f06 100644
--- a/net/hsr/hsr_forward.h
+++ b/net/hsr/hsr_forward.h
@@ -23,8 +23,8 @@ struct sk_buff *hsr_get_untagged_frame(struct hsr_frame_info *frame,
struct sk_buff *prp_get_untagged_frame(struct hsr_frame_info *frame,
struct hsr_port *port);
bool prp_drop_frame(struct hsr_frame_info *frame, struct hsr_port *port);
-void prp_fill_frame_info(__be16 proto, struct sk_buff *skb,
- struct hsr_frame_info *frame);
-void hsr_fill_frame_info(__be16 proto, struct sk_buff *skb,
- struct hsr_frame_info *frame);
+int prp_fill_frame_info(__be16 proto, struct sk_buff *skb,
+ struct hsr_frame_info *frame);
+int hsr_fill_frame_info(__be16 proto, struct sk_buff *skb,
+ struct hsr_frame_info *frame);
#endif /* __HSR_FORWARD_H */
diff --git a/net/hsr/hsr_main.h b/net/hsr/hsr_main.h
index f79ca55d6986..9a25a5d349ae 100644
--- a/net/hsr/hsr_main.h
+++ b/net/hsr/hsr_main.h
@@ -192,8 +192,8 @@ struct hsr_proto_ops {
struct hsr_port *port);
struct sk_buff * (*create_tagged_frame)(struct hsr_frame_info *frame,
struct hsr_port *port);
- void (*fill_frame_info)(__be16 proto, struct sk_buff *skb,
- struct hsr_frame_info *frame);
+ int (*fill_frame_info)(__be16 proto, struct sk_buff *skb,
+ struct hsr_frame_info *frame);
bool (*invalid_dan_ingress_frame)(__be16 protocol);
void (*update_san_info)(struct hsr_node *node, bool is_sup);
};
diff --git a/net/hsr/hsr_slave.c b/net/hsr/hsr_slave.c
index 36d5fcf09c61..aecc05a28fa1 100644
--- a/net/hsr/hsr_slave.c
+++ b/net/hsr/hsr_slave.c
@@ -58,12 +58,11 @@ static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
goto finish_pass;
skb_push(skb, ETH_HLEN);
-
- if (skb_mac_header(skb) != skb->data) {
- WARN_ONCE(1, "%s:%d: Malformed frame at source port %s)\n",
- __func__, __LINE__, port->dev->name);
- goto finish_consume;
- }
+ skb_reset_mac_header(skb);
+ if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
+ protocol == htons(ETH_P_HSR))
+ skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
+ skb_reset_mac_len(skb);
hsr_forward_skb(skb, port);
--
2.30.2
From: Vlad Buslov <[email protected]>
[ Upstream commit 9453d45ecb6c2199d72e73c993e9d98677a2801b ]
Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:
[ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[ 778.301495] load of value 107 is not a valid value for type '_Bool'
[ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 778.307901] Call Trace:
[ 778.308680] <IRQ>
[ 778.309358] dump_stack+0xbb/0x107
[ 778.310307] ubsan_epilogue+0x5/0x40
[ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48
[ 778.312454] ? memset+0x20/0x40
[ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[ 778.317188] ? create_prof_cpu_mask+0x20/0x20
[ 778.318220] ? arch_stack_walk+0x82/0xf0
[ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb
[ 778.320399] ? stack_trace_save+0x91/0xc0
[ 778.321362] ? stack_trace_consume_entry+0x160/0x160
[ 778.322517] ? lock_release+0x52e/0x760
[ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch]
[ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[ 778.325950] __netif_receive_skb_core+0x771/0x2db0
[ 778.327067] ? lock_downgrade+0x6e0/0x6f0
[ 778.328021] ? lock_acquire+0x565/0x720
[ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0
[ 778.329902] ? inet_gro_receive+0x2a7/0x10a0
[ 778.330914] ? lock_downgrade+0x6f0/0x6f0
[ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0
[ 778.332876] ? lock_release+0x52e/0x760
[ 778.333808] ? dev_gro_receive+0xcc8/0x2380
[ 778.334810] ? lock_downgrade+0x6f0/0x6f0
[ 778.335769] __netif_receive_skb_list_core+0x295/0x820
[ 778.336955] ? process_backlog+0x780/0x780
[ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[ 778.341033] ? kvm_clock_get_cycles+0x14/0x20
[ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0
[ 778.343288] ? __kasan_kmalloc+0x7a/0x90
[ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820
[ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[ 778.349688] ? napi_gro_flush+0x26c/0x3c0
[ 778.350641] napi_complete_done+0x188/0x6b0
[ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[ 778.352853] __napi_poll+0x9f/0x510
[ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[ 778.355158] net_rx_action+0x34c/0xa40
[ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0
[ 778.357083] ? sched_clock_cpu+0x18/0x190
[ 778.358041] ? __common_interrupt+0x8e/0x1a0
[ 778.359045] __do_softirq+0x1ce/0x984
[ 778.359938] __irq_exit_rcu+0x137/0x1d0
[ 778.360865] irq_exit_rcu+0xa/0x20
[ 778.361708] common_interrupt+0x80/0xa0
[ 778.362640] </IRQ>
[ 778.363212] asm_common_interrupt+0x1e/0x40
[ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[ 778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[ 778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[ 778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[ 778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[ 778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[ 778.378491] ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[ 778.379606] ? default_idle_call+0x5e/0xe0
[ 778.380578] default_idle+0xa/0x10
[ 778.381406] default_idle_call+0x96/0xe0
[ 778.382350] do_idle+0x3d4/0x550
[ 778.383153] ? arch_cpu_idle_exit+0x40/0x40
[ 778.384143] cpu_startup_entry+0x19/0x20
[ 778.385078] start_kernel+0x3c7/0x3e5
[ 778.385978] secondary_startup_64_no_verify+0xb0/0xbb
Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.
Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Vlad Buslov <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
include/net/pkt_cls.h | 11 +++++++++++
net/sched/cls_api.c | 2 +-
4 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
index 76177f7c5ec2..e6f782743fbe 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
@@ -643,7 +643,7 @@ bool mlx5e_rep_tc_update_skb(struct mlx5_cqe64 *cqe,
}
if (chain) {
- tc_skb_ext = skb_ext_add(skb, TC_SKB_EXT);
+ tc_skb_ext = tc_skb_ext_alloc(skb);
if (!tc_skb_ext) {
WARN_ON(1);
return false;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index e60b8bc9b804..1bdeb948f56d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -5494,7 +5494,7 @@ bool mlx5e_tc_update_skb(struct mlx5_cqe64 *cqe,
}
if (chain) {
- tc_skb_ext = skb_ext_add(skb, TC_SKB_EXT);
+ tc_skb_ext = tc_skb_ext_alloc(skb);
if (WARN_ON(!tc_skb_ext))
return false;
diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
index d4d461236351..b608be532964 100644
--- a/include/net/pkt_cls.h
+++ b/include/net/pkt_cls.h
@@ -709,6 +709,17 @@ tc_cls_common_offload_init(struct flow_cls_common_offload *cls_common,
cls_common->extack = extack;
}
+#if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
+static inline struct tc_skb_ext *tc_skb_ext_alloc(struct sk_buff *skb)
+{
+ struct tc_skb_ext *tc_skb_ext = skb_ext_add(skb, TC_SKB_EXT);
+
+ if (tc_skb_ext)
+ memset(tc_skb_ext, 0, sizeof(*tc_skb_ext));
+ return tc_skb_ext;
+}
+#endif
+
enum tc_matchall_command {
TC_CLSMATCHALL_REPLACE,
TC_CLSMATCHALL_DESTROY,
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 9383dc29ead5..a281da07bb1d 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1625,7 +1625,7 @@ int tcf_classify_ingress(struct sk_buff *skb,
/* If we missed on some chain */
if (ret == TC_ACT_UNSPEC && last_executed_chain) {
- ext = skb_ext_add(skb, TC_SKB_EXT);
+ ext = tc_skb_ext_alloc(skb);
if (WARN_ON_ONCE(!ext))
return TC_ACT_SHOT;
ext->chain = last_executed_chain;
--
2.30.2
From: Magnus Karlsson <[email protected]>
commit 3b80d106e110d39d3f678954d3b55078669cf07e upstream.
Fix the tx_only micro-benchmark in xdpsock to take frame size into
consideration. It was hardcoded to the default value of frame_size
which is 4K. Changing this on the command line to 2K made half of the
packets illegal as they were outside the umem and were therefore
discarded by the kernel.
Fixes: 46738f73ea4f ("samples/bpf: add use of need_wakeup flag in xdpsock")
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
samples/bpf/xdpsock_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/samples/bpf/xdpsock_user.c
+++ b/samples/bpf/xdpsock_user.c
@@ -1257,7 +1257,7 @@ static void tx_only(struct xsk_socket_in
for (i = 0; i < batch_size; i++) {
struct xdp_desc *tx_desc = xsk_ring_prod__tx_desc(&xsk->tx,
idx + i);
- tx_desc->addr = (*frame_nb + i) << XSK_UMEM__DEFAULT_FRAME_SHIFT;
+ tx_desc->addr = (*frame_nb + i) * opt_xsk_frame_size;
tx_desc->len = PKT_SIZE;
}
From: Jussi Maki <[email protected]>
[ Upstream commit 84316ca4e100d8cbfccd9f774e23817cb2059868 ]
The skb_change_head() helper did not set "skb->mac_len", which is
problematic when it's used in combination with skb_redirect_peer().
Without it, redirecting a packet from a L3 device such as wireguard to
the veth peer device will cause skb->data to point to the middle of the
IP header on entry to tcp_v4_rcv() since the L2 header is not pulled
correctly due to mac_len=0.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Jussi Maki <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/filter.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/core/filter.c b/net/core/filter.c
index 9358bc4a3711..ef6bdbb63ecb 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3782,6 +3782,7 @@ static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room,
__skb_push(skb, head_room);
memset(skb->data, 0, head_room);
skb_reset_mac_header(skb);
+ skb_reset_mac_len(skb);
}
return ret;
--
2.30.2
From: Yunsheng Lin <[email protected]>
commit 9bb5a495424fd4bfa672eb1f31481248562fa156 upstream.
Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.
So adds checking for the return of skb_checksum_help().
Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -792,8 +792,6 @@ static bool hns3_tunnel_csum_bug(struct
l4.udp->dest == htons(4790))))
return false;
- skb_checksum_help(skb);
-
return true;
}
@@ -871,8 +869,7 @@ static int hns3_set_l2l3l4(struct sk_buf
/* the stack computes the IP header already,
* driver calculate l4 checksum when not TSO.
*/
- skb_checksum_help(skb);
- return 0;
+ return skb_checksum_help(skb);
}
hns3_set_outer_l2l3l4(skb, ol4_proto, ol_type_vlan_len_msec);
@@ -917,7 +914,7 @@ static int hns3_set_l2l3l4(struct sk_buf
break;
case IPPROTO_UDP:
if (hns3_tunnel_csum_bug(skb))
- break;
+ return skb_checksum_help(skb);
hns3_set_field(*type_cs_vlan_tso, HNS3_TXD_L4CS_B, 1);
hns3_set_field(*type_cs_vlan_tso, HNS3_TXD_L4T_S,
@@ -942,8 +939,7 @@ static int hns3_set_l2l3l4(struct sk_buf
/* the stack computes the IP header already,
* driver calculate l4 checksum when not TSO.
*/
- skb_checksum_help(skb);
- return 0;
+ return skb_checksum_help(skb);
}
return 0;
From: Trond Myklebust <[email protected]>
commit e86be3a04bc4aeaf12f93af35f08f8d4385bcd98 upstream.
Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.
Fixes: e877a88d1f06 ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/sunrpc/xprt.h | 2 +
net/sunrpc/xprt.c | 58 +++++++++++++++++++---------------------
net/sunrpc/xprtrdma/transport.c | 12 ++++----
net/sunrpc/xprtrdma/verbs.c | 18 ++++++++++--
net/sunrpc/xprtrdma/xprt_rdma.h | 1
5 files changed, 52 insertions(+), 39 deletions(-)
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -367,6 +367,8 @@ struct rpc_xprt * xprt_alloc(struct net
unsigned int num_prealloc,
unsigned int max_req);
void xprt_free(struct rpc_xprt *);
+void xprt_add_backlog(struct rpc_xprt *xprt, struct rpc_task *task);
+bool xprt_wake_up_backlog(struct rpc_xprt *xprt, struct rpc_rqst *req);
static inline int
xprt_enable_swap(struct rpc_xprt *xprt)
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1575,11 +1575,18 @@ xprt_transmit(struct rpc_task *task)
spin_unlock(&xprt->queue_lock);
}
-static void xprt_add_backlog(struct rpc_xprt *xprt, struct rpc_task *task)
+static void xprt_complete_request_init(struct rpc_task *task)
+{
+ if (task->tk_rqstp)
+ xprt_request_init(task);
+}
+
+void xprt_add_backlog(struct rpc_xprt *xprt, struct rpc_task *task)
{
set_bit(XPRT_CONGESTED, &xprt->state);
- rpc_sleep_on(&xprt->backlog, task, NULL);
+ rpc_sleep_on(&xprt->backlog, task, xprt_complete_request_init);
}
+EXPORT_SYMBOL_GPL(xprt_add_backlog);
static bool __xprt_set_rq(struct rpc_task *task, void *data)
{
@@ -1587,14 +1594,13 @@ static bool __xprt_set_rq(struct rpc_tas
if (task->tk_rqstp == NULL) {
memset(req, 0, sizeof(*req)); /* mark unused */
- task->tk_status = -EAGAIN;
task->tk_rqstp = req;
return true;
}
return false;
}
-static bool xprt_wake_up_backlog(struct rpc_xprt *xprt, struct rpc_rqst *req)
+bool xprt_wake_up_backlog(struct rpc_xprt *xprt, struct rpc_rqst *req)
{
if (rpc_wake_up_first(&xprt->backlog, __xprt_set_rq, req) == NULL) {
clear_bit(XPRT_CONGESTED, &xprt->state);
@@ -1602,6 +1608,7 @@ static bool xprt_wake_up_backlog(struct
}
return true;
}
+EXPORT_SYMBOL_GPL(xprt_wake_up_backlog);
static bool xprt_throttle_congested(struct rpc_xprt *xprt, struct rpc_task *task)
{
@@ -1611,7 +1618,7 @@ static bool xprt_throttle_congested(stru
goto out;
spin_lock(&xprt->reserve_lock);
if (test_bit(XPRT_CONGESTED, &xprt->state)) {
- rpc_sleep_on(&xprt->backlog, task, NULL);
+ xprt_add_backlog(xprt, task);
ret = true;
}
spin_unlock(&xprt->reserve_lock);
@@ -1780,10 +1787,6 @@ xprt_request_init(struct rpc_task *task)
struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req = task->tk_rqstp;
- if (req->rq_task)
- /* Already initialized */
- return;
-
req->rq_task = task;
req->rq_xprt = xprt;
req->rq_buffer = NULL;
@@ -1844,10 +1847,8 @@ void xprt_retry_reserve(struct rpc_task
struct rpc_xprt *xprt = task->tk_xprt;
task->tk_status = 0;
- if (task->tk_rqstp != NULL) {
- xprt_request_init(task);
+ if (task->tk_rqstp != NULL)
return;
- }
task->tk_status = -EAGAIN;
xprt_do_reserve(xprt, task);
@@ -1872,24 +1873,21 @@ void xprt_release(struct rpc_task *task)
}
xprt = req->rq_xprt;
- if (xprt) {
- xprt_request_dequeue_xprt(task);
- spin_lock(&xprt->transport_lock);
- xprt->ops->release_xprt(xprt, task);
- if (xprt->ops->release_request)
- xprt->ops->release_request(task);
- xprt_schedule_autodisconnect(xprt);
- spin_unlock(&xprt->transport_lock);
- if (req->rq_buffer)
- xprt->ops->buf_free(task);
- xdr_free_bvec(&req->rq_rcv_buf);
- xdr_free_bvec(&req->rq_snd_buf);
- if (req->rq_cred != NULL)
- put_rpccred(req->rq_cred);
- if (req->rq_release_snd_buf)
- req->rq_release_snd_buf(req);
- } else
- xprt = task->tk_xprt;
+ xprt_request_dequeue_xprt(task);
+ spin_lock(&xprt->transport_lock);
+ xprt->ops->release_xprt(xprt, task);
+ if (xprt->ops->release_request)
+ xprt->ops->release_request(task);
+ xprt_schedule_autodisconnect(xprt);
+ spin_unlock(&xprt->transport_lock);
+ if (req->rq_buffer)
+ xprt->ops->buf_free(task);
+ xdr_free_bvec(&req->rq_rcv_buf);
+ xdr_free_bvec(&req->rq_snd_buf);
+ if (req->rq_cred != NULL)
+ put_rpccred(req->rq_cred);
+ if (req->rq_release_snd_buf)
+ req->rq_release_snd_buf(req);
task->tk_rqstp = NULL;
if (likely(!bc_prealloc(req)))
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -520,9 +520,8 @@ xprt_rdma_alloc_slot(struct rpc_xprt *xp
return;
out_sleep:
- set_bit(XPRT_CONGESTED, &xprt->state);
- rpc_sleep_on(&xprt->backlog, task, NULL);
task->tk_status = -EAGAIN;
+ xprt_add_backlog(xprt, task);
}
/**
@@ -537,10 +536,11 @@ xprt_rdma_free_slot(struct rpc_xprt *xpr
struct rpcrdma_xprt *r_xprt =
container_of(xprt, struct rpcrdma_xprt, rx_xprt);
- memset(rqst, 0, sizeof(*rqst));
- rpcrdma_buffer_put(&r_xprt->rx_buf, rpcr_to_rdmar(rqst));
- if (unlikely(!rpc_wake_up_next(&xprt->backlog)))
- clear_bit(XPRT_CONGESTED, &xprt->state);
+ rpcrdma_reply_put(&r_xprt->rx_buf, rpcr_to_rdmar(rqst));
+ if (!xprt_wake_up_backlog(xprt, rqst)) {
+ memset(rqst, 0, sizeof(*rqst));
+ rpcrdma_buffer_put(&r_xprt->rx_buf, rpcr_to_rdmar(rqst));
+ }
}
static bool rpcrdma_check_regbuf(struct rpcrdma_xprt *r_xprt,
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1198,6 +1198,20 @@ void rpcrdma_mr_put(struct rpcrdma_mr *m
}
/**
+ * rpcrdma_reply_put - Put reply buffers back into pool
+ * @buffers: buffer pool
+ * @req: object to return
+ *
+ */
+void rpcrdma_reply_put(struct rpcrdma_buffer *buffers, struct rpcrdma_req *req)
+{
+ if (req->rl_reply) {
+ rpcrdma_rep_put(buffers, req->rl_reply);
+ req->rl_reply = NULL;
+ }
+}
+
+/**
* rpcrdma_buffer_get - Get a request buffer
* @buffers: Buffer pool from which to obtain a buffer
*
@@ -1225,9 +1239,7 @@ rpcrdma_buffer_get(struct rpcrdma_buffer
*/
void rpcrdma_buffer_put(struct rpcrdma_buffer *buffers, struct rpcrdma_req *req)
{
- if (req->rl_reply)
- rpcrdma_rep_put(buffers, req->rl_reply);
- req->rl_reply = NULL;
+ rpcrdma_reply_put(buffers, req);
spin_lock(&buffers->rb_lock);
list_add(&req->rl_list, &buffers->rb_send_bufs);
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -472,6 +472,7 @@ void rpcrdma_mrs_refresh(struct rpcrdma_
struct rpcrdma_req *rpcrdma_buffer_get(struct rpcrdma_buffer *);
void rpcrdma_buffer_put(struct rpcrdma_buffer *buffers,
struct rpcrdma_req *req);
+void rpcrdma_reply_put(struct rpcrdma_buffer *buffers, struct rpcrdma_req *req);
void rpcrdma_recv_buffer_put(struct rpcrdma_rep *);
bool rpcrdma_regbuf_realloc(struct rpcrdma_regbuf *rb, size_t size,
From: Johan Hovold <[email protected]>
commit 4d52ebc7ace491d58f96d1f4a1cb9070c506b2e7 upstream.
Commit 31db0dbd7244 ("net: hso: check for allocation failure in
hso_create_bulk_serial_device()") recently started returning an error
when the driver fails to allocate resources for the interrupt endpoint
and tiocmget functionality.
For consistency let's bail out from probe also if the URB allocation
fails.
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/hso.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2635,14 +2635,14 @@ static struct hso_device *hso_create_bul
}
tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (tiocmget->urb) {
- mutex_init(&tiocmget->mutex);
- init_waitqueue_head(&tiocmget->waitq);
- } else
- hso_free_tiomget(serial);
- }
- else
+ if (!tiocmget->urb)
+ goto exit;
+
+ mutex_init(&tiocmget->mutex);
+ init_waitqueue_head(&tiocmget->waitq);
+ } else {
num_urbs = 1;
+ }
if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
BULK_URB_TX_SIZE))
From: Masahiro Yamada <[email protected]>
commit 074075aea2ff72dade5231b4ee9f2ab9a055f1ec upstream.
For the same reason as commit 51839e29cb59 ("scripts: switch explicitly
to Python 3"), switch some more scripts, which I tested and confirmed
working on Python 3.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Nathan Chancellor <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/clang-tools/gen_compile_commands.py | 2 +-
scripts/clang-tools/run-clang-tools.py | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/scripts/clang-tools/gen_compile_commands.py
+++ b/scripts/clang-tools/gen_compile_commands.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0
#
# Copyright (C) Google LLC, 2018
--- a/scripts/clang-tools/run-clang-tools.py
+++ b/scripts/clang-tools/run-clang-tools.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0
#
# Copyright (C) Google LLC, 2020
From: Liu Jian <[email protected]>
commit a8deba8547e39f26440101164a3bbc2899c5b305 upstream.
The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.
Fixes: db94cc0b4805 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/bpf/bpftool/Documentation/bpftool-cgroup.rst | 4 +++-
tools/bpf/bpftool/Documentation/bpftool-prog.rst | 2 +-
tools/bpf/bpftool/bash-completion/bpftool | 6 +++---
tools/bpf/bpftool/cgroup.c | 3 ++-
tools/bpf/bpftool/prog.c | 2 +-
5 files changed, 10 insertions(+), 7 deletions(-)
--- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -30,7 +30,8 @@ CGROUP COMMANDS
| *ATTACH_TYPE* := { **ingress** | **egress** | **sock_create** | **sock_ops** | **device** |
| **bind4** | **bind6** | **post_bind4** | **post_bind6** | **connect4** | **connect6** |
| **getpeername4** | **getpeername6** | **getsockname4** | **getsockname6** | **sendmsg4** |
-| **sendmsg6** | **recvmsg4** | **recvmsg6** | **sysctl** | **getsockopt** | **setsockopt** }
+| **sendmsg6** | **recvmsg4** | **recvmsg6** | **sysctl** | **getsockopt** | **setsockopt** |
+| **sock_release** }
| *ATTACH_FLAGS* := { **multi** | **override** }
DESCRIPTION
@@ -106,6 +107,7 @@ DESCRIPTION
**getpeername6** call to getpeername(2) for an inet6 socket (since 5.8);
**getsockname4** call to getsockname(2) for an inet4 socket (since 5.8);
**getsockname6** call to getsockname(2) for an inet6 socket (since 5.8).
+ **sock_release** closing an userspace inet socket (since 5.9).
**bpftool cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
Detach *PROG* from the cgroup *CGROUP* and attach type
--- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
@@ -44,7 +44,7 @@ PROG COMMANDS
| **cgroup/connect4** | **cgroup/connect6** | **cgroup/getpeername4** | **cgroup/getpeername6** |
| **cgroup/getsockname4** | **cgroup/getsockname6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** |
| **cgroup/recvmsg4** | **cgroup/recvmsg6** | **cgroup/sysctl** |
-| **cgroup/getsockopt** | **cgroup/setsockopt** |
+| **cgroup/getsockopt** | **cgroup/setsockopt** | **cgroup/sock_release** |
| **struct_ops** | **fentry** | **fexit** | **freplace** | **sk_lookup**
| }
| *ATTACH_TYPE* := {
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -478,7 +478,7 @@ _bpftool()
cgroup/recvmsg4 cgroup/recvmsg6 \
cgroup/post_bind4 cgroup/post_bind6 \
cgroup/sysctl cgroup/getsockopt \
- cgroup/setsockopt struct_ops \
+ cgroup/setsockopt cgroup/sock_release struct_ops \
fentry fexit freplace sk_lookup" -- \
"$cur" ) )
return 0
@@ -1008,7 +1008,7 @@ _bpftool()
device bind4 bind6 post_bind4 post_bind6 connect4 connect6 \
getpeername4 getpeername6 getsockname4 getsockname6 \
sendmsg4 sendmsg6 recvmsg4 recvmsg6 sysctl getsockopt \
- setsockopt'
+ setsockopt sock_release'
local ATTACH_FLAGS='multi override'
local PROG_TYPE='id pinned tag name'
case $prev in
@@ -1019,7 +1019,7 @@ _bpftool()
ingress|egress|sock_create|sock_ops|device|bind4|bind6|\
post_bind4|post_bind6|connect4|connect6|getpeername4|\
getpeername6|getsockname4|getsockname6|sendmsg4|sendmsg6|\
- recvmsg4|recvmsg6|sysctl|getsockopt|setsockopt)
+ recvmsg4|recvmsg6|sysctl|getsockopt|setsockopt|sock_release)
COMPREPLY=( $( compgen -W "$PROG_TYPE" -- \
"$cur" ) )
return 0
--- a/tools/bpf/bpftool/cgroup.c
+++ b/tools/bpf/bpftool/cgroup.c
@@ -28,7 +28,8 @@
" connect6 | getpeername4 | getpeername6 |\n" \
" getsockname4 | getsockname6 | sendmsg4 |\n" \
" sendmsg6 | recvmsg4 | recvmsg6 |\n" \
- " sysctl | getsockopt | setsockopt }"
+ " sysctl | getsockopt | setsockopt |\n" \
+ " sock_release }"
static unsigned int query_flags;
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -2105,7 +2105,7 @@ static int do_help(int argc, char **argv
" cgroup/getpeername4 | cgroup/getpeername6 |\n"
" cgroup/getsockname4 | cgroup/getsockname6 | cgroup/sendmsg4 |\n"
" cgroup/sendmsg6 | cgroup/recvmsg4 | cgroup/recvmsg6 |\n"
- " cgroup/getsockopt | cgroup/setsockopt |\n"
+ " cgroup/getsockopt | cgroup/setsockopt | cgroup/sock_release |\n"
" struct_ops | fentry | fexit | freplace | sk_lookup }\n"
" ATTACH_TYPE := { msg_verdict | stream_verdict | stream_parser |\n"
" flow_dissector }\n"
From: Stefan Chulski <[email protected]>
[ Upstream commit 17f9c1b63cdd4439523cfcdf5683e5070b911f24 ]
If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.
Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <[email protected]>
Signed-off-by: Stefan Chulski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 22 ++++++++
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 54 +++++++++++++++----
2 files changed, 67 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 834775843067..a1aefce55e65 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -909,6 +909,14 @@ enum mvpp22_ptp_packet_format {
#define MVPP2_DESC_DMA_MASK DMA_BIT_MASK(40)
+/* Buffer header info bits */
+#define MVPP2_B_HDR_INFO_MC_ID_MASK 0xfff
+#define MVPP2_B_HDR_INFO_MC_ID(info) ((info) & MVPP2_B_HDR_INFO_MC_ID_MASK)
+#define MVPP2_B_HDR_INFO_LAST_OFFS 12
+#define MVPP2_B_HDR_INFO_LAST_MASK BIT(12)
+#define MVPP2_B_HDR_INFO_IS_LAST(info) \
+ (((info) & MVPP2_B_HDR_INFO_LAST_MASK) >> MVPP2_B_HDR_INFO_LAST_OFFS)
+
struct mvpp2_tai;
/* Definitions */
@@ -918,6 +926,20 @@ struct mvpp2_rss_table {
u32 indir[MVPP22_RSS_TABLE_ENTRIES];
};
+struct mvpp2_buff_hdr {
+ __le32 next_phys_addr;
+ __le32 next_dma_addr;
+ __le16 byte_count;
+ __le16 info;
+ __le16 reserved1; /* bm_qset (for future use, BM) */
+ u8 next_phys_addr_high;
+ u8 next_dma_addr_high;
+ __le16 reserved2;
+ __le16 reserved3;
+ __le16 reserved4;
+ __le16 reserved5;
+};
+
/* Shared Packet Processor resources */
struct mvpp2 {
/* Shared registers' base addresses */
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index f5333fc27e14..6aa13c9f9fc9 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -3481,6 +3481,35 @@ mvpp2_run_xdp(struct mvpp2_port *port, struct mvpp2_rx_queue *rxq,
return ret;
}
+static void mvpp2_buff_hdr_pool_put(struct mvpp2_port *port, struct mvpp2_rx_desc *rx_desc,
+ int pool, u32 rx_status)
+{
+ phys_addr_t phys_addr, phys_addr_next;
+ dma_addr_t dma_addr, dma_addr_next;
+ struct mvpp2_buff_hdr *buff_hdr;
+
+ phys_addr = mvpp2_rxdesc_dma_addr_get(port, rx_desc);
+ dma_addr = mvpp2_rxdesc_cookie_get(port, rx_desc);
+
+ do {
+ buff_hdr = (struct mvpp2_buff_hdr *)phys_to_virt(phys_addr);
+
+ phys_addr_next = le32_to_cpu(buff_hdr->next_phys_addr);
+ dma_addr_next = le32_to_cpu(buff_hdr->next_dma_addr);
+
+ if (port->priv->hw_version >= MVPP22) {
+ phys_addr_next |= ((u64)buff_hdr->next_phys_addr_high << 32);
+ dma_addr_next |= ((u64)buff_hdr->next_dma_addr_high << 32);
+ }
+
+ mvpp2_bm_pool_put(port, pool, dma_addr, phys_addr);
+
+ phys_addr = phys_addr_next;
+ dma_addr = dma_addr_next;
+
+ } while (!MVPP2_B_HDR_INFO_IS_LAST(le16_to_cpu(buff_hdr->info)));
+}
+
/* Main rx processing */
static int mvpp2_rx(struct mvpp2_port *port, struct napi_struct *napi,
int rx_todo, struct mvpp2_rx_queue *rxq)
@@ -3527,14 +3556,6 @@ static int mvpp2_rx(struct mvpp2_port *port, struct napi_struct *napi,
MVPP2_RXD_BM_POOL_ID_OFFS;
bm_pool = &port->priv->bm_pools[pool];
- /* In case of an error, release the requested buffer pointer
- * to the Buffer Manager. This request process is controlled
- * by the hardware, and the information about the buffer is
- * comprised by the RX descriptor.
- */
- if (rx_status & MVPP2_RXD_ERR_SUMMARY)
- goto err_drop_frame;
-
if (port->priv->percpu_pools) {
pp = port->priv->page_pool[pool];
dma_dir = page_pool_get_dma_dir(pp);
@@ -3546,6 +3567,18 @@ static int mvpp2_rx(struct mvpp2_port *port, struct napi_struct *napi,
rx_bytes + MVPP2_MH_SIZE,
dma_dir);
+ /* Buffer header not supported */
+ if (rx_status & MVPP2_RXD_BUF_HDR)
+ goto err_drop_frame;
+
+ /* In case of an error, release the requested buffer pointer
+ * to the Buffer Manager. This request process is controlled
+ * by the hardware, and the information about the buffer is
+ * comprised by the RX descriptor.
+ */
+ if (rx_status & MVPP2_RXD_ERR_SUMMARY)
+ goto err_drop_frame;
+
/* Prefetch header */
prefetch(data);
@@ -3627,7 +3660,10 @@ err_drop_frame:
dev->stats.rx_errors++;
mvpp2_rx_error(port, rx_desc);
/* Return the buffer to the pool */
- mvpp2_bm_pool_put(port, pool, dma_addr, phys_addr);
+ if (rx_status & MVPP2_RXD_BUF_HDR)
+ mvpp2_buff_hdr_pool_put(port, rx_desc, pool, rx_status);
+ else
+ mvpp2_bm_pool_put(port, pool, dma_addr, phys_addr);
}
rcu_read_unlock();
--
2.30.2
From: Chinmay Agarwal <[email protected]>
commit eefb45eef5c4c425e87667af8f5e904fbdd47abf upstream.
Following Race Condition was detected:
<CPU A, t0>: Executing: __netif_receive_skb() ->__netif_receive_skb_core()
-> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which
takes a reference on neighbour entry 'n'.
Moves further along, arp_process() and calls neigh_update()->
__neigh_update(). Neighbour entry is unlocked just before a call to
neigh_update_gc_list.
This unlocking paves way for another thread that may take a reference on
the same and mark it dead and remove it from gc_list.
<CPU B, t1> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead. Also n will be
removed from gc_list.
Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t1,
'n' couldn't be destroyed.
<CPU A, t3>- Code hits neigh_update_gc_list, with neighbour entry
set as dead.
<CPU A, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry and we have a destroyed ntry still part of gc_list.
Fixes: eb4e8fac00d1("neighbour: Prevent a dead entry from updating gc_list")
Signed-off-by: Chinmay Agarwal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/neighbour.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -132,6 +132,9 @@ static void neigh_update_gc_list(struct
write_lock_bh(&n->tbl->lock);
write_lock(&n->lock);
+ if (n->dead)
+ goto out;
+
/* remove from the gc list if new state is permanent or if neighbor
* is externally learned; otherwise entry should be on the gc list
*/
@@ -148,6 +151,7 @@ static void neigh_update_gc_list(struct
atomic_inc(&n->tbl->gc_entries);
}
+out:
write_unlock(&n->lock);
write_unlock_bh(&n->tbl->lock);
}
From: Taehee Yoo <[email protected]>
[ Upstream commit 9b76eade16423ef06829cccfe3e100cfce31afcd ]
If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.
Test commands:
sysctl net.core.default_qdisc=dsmark -w
ip link add dummy0 type dummy
ip link add vw0 link dummy0 type virt_wifi
ip link set vw0 up
Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS: 00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? rcu_read_lock_bh_held+0xa0/0xa0
dsmark_reset+0x3d/0xf0 [sch_dsmark]
qdisc_reset+0xa9/0x680
qdisc_destroy+0x84/0x370
qdisc_create_dflt+0x1fe/0x380
attach_one_default_qdisc.constprop.41+0xa4/0x180
dev_activate+0x4d5/0x8c0
? __dev_open+0x268/0x390
__dev_open+0x270/0x390
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_dsmark.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 2b88710994d7..76ed1a05ded2 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -406,7 +406,8 @@ static void dsmark_reset(struct Qdisc *sch)
struct dsmark_qdisc_data *p = qdisc_priv(sch);
pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
- qdisc_reset(p->q);
+ if (p->q)
+ qdisc_reset(p->q);
sch->qstats.backlog = 0;
sch->q.qlen = 0;
}
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ]
board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.
../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
56 | alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
57 | alchemy_gpio2_enable();
Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Cc: Manuel Lauss <[email protected]>
Cc: Ralf Baechle <[email protected]>
Acked-by: Manuel Lauss <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/alchemy/board-xxs1500.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index b184baa4e56a..f175bce2987f 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -18,6 +18,7 @@
#include <asm/reboot.h>
#include <asm/setup.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <prom.h>
const char *get_system_type(void)
--
2.30.2
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit c7718ee96dbc2f9c5fc3b578abdf296dd44b9c20 ]
In a situation where memory allocation or dma mapping fails, an
invalid address is programmed into the descriptor. This can lead
to memory corruption. If the memory allocation fails, DMA should
reuse the previous skb and mapping and drop the packet. This patch
also increments rx drop counter.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/lantiq_xrx200.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 51ed8a54d380..135ba5b6ae98 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -154,6 +154,7 @@ static int xrx200_close(struct net_device *net_dev)
static int xrx200_alloc_skb(struct xrx200_chan *ch)
{
+ dma_addr_t mapping;
int ret = 0;
ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
@@ -163,16 +164,17 @@ static int xrx200_alloc_skb(struct xrx200_chan *ch)
goto skip;
}
- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->priv->dev,
- ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(ch->priv->dev,
- ch->dma.desc_base[ch->dma.desc].addr))) {
+ mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
+ XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
ret = -ENOMEM;
goto skip;
}
+ ch->dma.desc_base[ch->dma.desc].addr = mapping;
+ /* Make sure the address is written before we give it to HW */
+ wmb();
skip:
ch->dma.desc_base[ch->dma.desc].ctl =
LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
@@ -196,6 +198,8 @@ static int xrx200_hw_receive(struct xrx200_chan *ch)
ch->dma.desc %= LTQ_DESC_NUM;
if (ret) {
+ ch->skb[ch->dma.desc] = skb;
+ net_dev->stats.rx_dropped++;
netdev_err(net_dev, "failed to allocate new rx buffer\n");
return ret;
}
--
2.30.2
From: Francesco Ruggeri <[email protected]>
[ Upstream commit e29f011e8fc04b2cdc742a2b9bbfa1b62518381a ]
Commit dbd1759e6a9c ("ipv6: on reassembly, record frag_max_size")
filled the frag_max_size field in IP6CB in the input path.
The field should also be filled in case of atomic fragments.
Fixes: dbd1759e6a9c ('ipv6: on reassembly, record frag_max_size')
Signed-off-by: Francesco Ruggeri <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/reassembly.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 47a0dc46cbdb..28e44782c94d 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -343,7 +343,7 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
hdr = ipv6_hdr(skb);
fhdr = (struct frag_hdr *)skb_transport_header(skb);
- if (!(fhdr->frag_off & htons(0xFFF9))) {
+ if (!(fhdr->frag_off & htons(IP6_OFFSET | IP6_MF))) {
/* It is not a fragmented frame */
skb->transport_header += sizeof(struct frag_hdr);
__IP6_INC_STATS(net,
@@ -351,6 +351,8 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
+ IP6CB(skb)->frag_max_size = ntohs(hdr->payload_len) +
+ sizeof(struct ipv6hdr);
return 1;
}
--
2.30.2
From: Stefan Roese <[email protected]>
[ Upstream commit ad79fd2c42f7626bdf6935cd72134c2a5a59ff2d ]
The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.
Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.
Signed-off-by: Stefan Roese <[email protected]>
Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <[email protected]>
Cc: John Crispin <[email protected]>
Cc: Ilya Lipnitskiy <[email protected]>
Cc: Reto Schneider <[email protected]>
Cc: Reto Schneider <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 67 ++++++++++++++-------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 24 +++++++-
2 files changed, 66 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index d930fcda9c3b..a2d3f04a9ff2 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -679,32 +679,53 @@ static int mtk_set_mac_address(struct net_device *dev, void *p)
void mtk_stats_update_mac(struct mtk_mac *mac)
{
struct mtk_hw_stats *hw_stats = mac->hw_stats;
- unsigned int base = MTK_GDM1_TX_GBCNT;
- u64 stats;
-
- base += hw_stats->reg_offset;
+ struct mtk_eth *eth = mac->hw;
u64_stats_update_begin(&hw_stats->syncp);
- hw_stats->rx_bytes += mtk_r32(mac->hw, base);
- stats = mtk_r32(mac->hw, base + 0x04);
- if (stats)
- hw_stats->rx_bytes += (stats << 32);
- hw_stats->rx_packets += mtk_r32(mac->hw, base + 0x08);
- hw_stats->rx_overflow += mtk_r32(mac->hw, base + 0x10);
- hw_stats->rx_fcs_errors += mtk_r32(mac->hw, base + 0x14);
- hw_stats->rx_short_errors += mtk_r32(mac->hw, base + 0x18);
- hw_stats->rx_long_errors += mtk_r32(mac->hw, base + 0x1c);
- hw_stats->rx_checksum_errors += mtk_r32(mac->hw, base + 0x20);
- hw_stats->rx_flow_control_packets +=
- mtk_r32(mac->hw, base + 0x24);
- hw_stats->tx_skip += mtk_r32(mac->hw, base + 0x28);
- hw_stats->tx_collisions += mtk_r32(mac->hw, base + 0x2c);
- hw_stats->tx_bytes += mtk_r32(mac->hw, base + 0x30);
- stats = mtk_r32(mac->hw, base + 0x34);
- if (stats)
- hw_stats->tx_bytes += (stats << 32);
- hw_stats->tx_packets += mtk_r32(mac->hw, base + 0x38);
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
+ hw_stats->tx_packets += mtk_r32(mac->hw, MT7628_SDM_TPCNT);
+ hw_stats->tx_bytes += mtk_r32(mac->hw, MT7628_SDM_TBCNT);
+ hw_stats->rx_packets += mtk_r32(mac->hw, MT7628_SDM_RPCNT);
+ hw_stats->rx_bytes += mtk_r32(mac->hw, MT7628_SDM_RBCNT);
+ hw_stats->rx_checksum_errors +=
+ mtk_r32(mac->hw, MT7628_SDM_CS_ERR);
+ } else {
+ unsigned int offs = hw_stats->reg_offset;
+ u64 stats;
+
+ hw_stats->rx_bytes += mtk_r32(mac->hw,
+ MTK_GDM1_RX_GBCNT_L + offs);
+ stats = mtk_r32(mac->hw, MTK_GDM1_RX_GBCNT_H + offs);
+ if (stats)
+ hw_stats->rx_bytes += (stats << 32);
+ hw_stats->rx_packets +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_GPCNT + offs);
+ hw_stats->rx_overflow +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_OERCNT + offs);
+ hw_stats->rx_fcs_errors +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_FERCNT + offs);
+ hw_stats->rx_short_errors +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_SERCNT + offs);
+ hw_stats->rx_long_errors +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_LENCNT + offs);
+ hw_stats->rx_checksum_errors +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_CERCNT + offs);
+ hw_stats->rx_flow_control_packets +=
+ mtk_r32(mac->hw, MTK_GDM1_RX_FCCNT + offs);
+ hw_stats->tx_skip +=
+ mtk_r32(mac->hw, MTK_GDM1_TX_SKIPCNT + offs);
+ hw_stats->tx_collisions +=
+ mtk_r32(mac->hw, MTK_GDM1_TX_COLCNT + offs);
+ hw_stats->tx_bytes +=
+ mtk_r32(mac->hw, MTK_GDM1_TX_GBCNT_L + offs);
+ stats = mtk_r32(mac->hw, MTK_GDM1_TX_GBCNT_H + offs);
+ if (stats)
+ hw_stats->tx_bytes += (stats << 32);
+ hw_stats->tx_packets +=
+ mtk_r32(mac->hw, MTK_GDM1_TX_GPCNT + offs);
+ }
+
u64_stats_update_end(&hw_stats->syncp);
}
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 73ce1f0f307a..54a7cd93cc0f 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -266,8 +266,21 @@
/* QDMA FQ Free Page Buffer Length Register */
#define MTK_QDMA_FQ_BLEN 0x1B2C
-/* GMA1 Received Good Byte Count Register */
-#define MTK_GDM1_TX_GBCNT 0x2400
+/* GMA1 counter / statics register */
+#define MTK_GDM1_RX_GBCNT_L 0x2400
+#define MTK_GDM1_RX_GBCNT_H 0x2404
+#define MTK_GDM1_RX_GPCNT 0x2408
+#define MTK_GDM1_RX_OERCNT 0x2410
+#define MTK_GDM1_RX_FERCNT 0x2414
+#define MTK_GDM1_RX_SERCNT 0x2418
+#define MTK_GDM1_RX_LENCNT 0x241c
+#define MTK_GDM1_RX_CERCNT 0x2420
+#define MTK_GDM1_RX_FCCNT 0x2424
+#define MTK_GDM1_TX_SKIPCNT 0x2428
+#define MTK_GDM1_TX_COLCNT 0x242c
+#define MTK_GDM1_TX_GBCNT_L 0x2430
+#define MTK_GDM1_TX_GBCNT_H 0x2434
+#define MTK_GDM1_TX_GPCNT 0x2438
#define MTK_STAT_OFFSET 0x40
/* QDMA descriptor txd4 */
@@ -478,6 +491,13 @@
#define MT7628_SDM_MAC_ADRL (MT7628_SDM_OFFSET + 0x0c)
#define MT7628_SDM_MAC_ADRH (MT7628_SDM_OFFSET + 0x10)
+/* Counter / stat register */
+#define MT7628_SDM_TPCNT (MT7628_SDM_OFFSET + 0x100)
+#define MT7628_SDM_TBCNT (MT7628_SDM_OFFSET + 0x104)
+#define MT7628_SDM_RPCNT (MT7628_SDM_OFFSET + 0x108)
+#define MT7628_SDM_RBCNT (MT7628_SDM_OFFSET + 0x10c)
+#define MT7628_SDM_CS_ERR (MT7628_SDM_OFFSET + 0x110)
+
struct mtk_rx_dma {
unsigned int rxd1;
unsigned int rxd2;
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
commit 27b57bb76a897be80494ee11ee4e85326d19383d upstream.
This reverts commit 4667a6fc1777ce071504bab570d3599107f4790f.
Takashi writes:
I have already started working on the bigger cleanup of this driver
code based on 5.13-rc1, so could you drop this revert?
I missed our previous discussion about this, my fault for applying it.
Reported-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/usx2y/usb_stream.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/sound/usb/usx2y/usb_stream.c
+++ b/sound/usb/usx2y/usb_stream.c
@@ -91,7 +91,12 @@ static int init_urbs(struct usb_stream_k
for (u = 0; u < USB_STREAM_NURBS; ++u) {
sk->inurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL);
+ if (!sk->inurb[u])
+ return -ENOMEM;
+
sk->outurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL);
+ if (!sk->outurb[u])
+ return -ENOMEM;
}
if (init_pipe_urbs(sk, use_packsize, sk->inurb, indata, dev, in_pipe) ||
From: Chunfeng Yun <[email protected]>
commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.
Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.
Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -148,8 +148,10 @@ static inline unsigned hub_power_on_good
{
unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
- /* Wait at least 100 msec for power to become stable */
- return max(delay, 100U);
+ if (!hub->hdev->parent) /* root hub */
+ return delay;
+ else /* Wait at least 100 msec for power to become stable */
+ return max(delay, 100U);
}
static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
From: Dan Carpenter <[email protected]>
[ Upstream commit 833bc4cf9754643acc69b3c6b65988ca78df4460 ]
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs35l33.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/cs35l33.c b/sound/soc/codecs/cs35l33.c
index 6042194d95d3..8894369e329a 100644
--- a/sound/soc/codecs/cs35l33.c
+++ b/sound/soc/codecs/cs35l33.c
@@ -1201,6 +1201,7 @@ static int cs35l33_i2c_probe(struct i2c_client *i2c_client,
dev_err(&i2c_client->dev,
"CS35L33 Device ID (%X). Expected ID %X\n",
devid, CS35L33_CHIP_ID);
+ ret = -EINVAL;
goto err_enable;
}
--
2.30.2
From: Stephen Boyd <[email protected]>
[ Upstream commit af2702549d68519ac78228e915d9b2c199056787 ]
This driver spits out a warning for me at boot:
sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2
but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.
Cc: Srinivas Kandagatla <[email protected]>
Cc: Banajit Goswami <[email protected]>
Fixes: 3e53ac8230c1 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/lpass-cpu.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 4fb2ec7c8867..7a30a12519a7 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -839,18 +839,8 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
if (dai_id == LPASS_DP_RX)
continue;
- drvdata->mi2s_osr_clk[dai_id] = devm_clk_get(dev,
+ drvdata->mi2s_osr_clk[dai_id] = devm_clk_get_optional(dev,
variant->dai_osr_clk_names[i]);
- if (IS_ERR(drvdata->mi2s_osr_clk[dai_id])) {
- dev_warn(dev,
- "%s() error getting optional %s: %ld\n",
- __func__,
- variant->dai_osr_clk_names[i],
- PTR_ERR(drvdata->mi2s_osr_clk[dai_id]));
-
- drvdata->mi2s_osr_clk[dai_id] = NULL;
- }
-
drvdata->mi2s_bit_clk[dai_id] = devm_clk_get(dev,
variant->dai_bit_clk_names[i]);
if (IS_ERR(drvdata->mi2s_bit_clk[dai_id])) {
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ]
If sas_notify_lldd_dev_found() fails then this code calls:
sas_unregister_dev(port, dev);
which removes "dev", our list iterator, from the list. This could lead to
an endless loop. We need to use list_for_each_entry_safe().
Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda
Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support")
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libsas/sas_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 19cf418928fa..e3d03d744713 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -25,7 +25,7 @@ static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy
static void sas_resume_port(struct asd_sas_phy *phy)
{
- struct domain_device *dev;
+ struct domain_device *dev, *n;
struct asd_sas_port *port = phy->port;
struct sas_ha_struct *sas_ha = phy->ha;
struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt);
@@ -44,7 +44,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
* 1/ presume every device came back
* 2/ force the next revalidation to check all expander phys
*/
- list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
int i, rc;
rc = sas_notify_lldd_dev_found(dev);
--
2.30.2
From: Jesse Brandeburg <[email protected]>
[ Upstream commit 63e39d29b3da02e901349f6cd71159818a4737a6 ]
Check that the MTU value requested by the VF is in the supported
range of MTUs before attempting to set the VF large packet enable,
otherwise reject the request. This also avoids unnecessary
register updates in the case of the 82599 controller.
Fixes: 872844ddb9e4 ("ixgbe: Enable jumbo frames support w/ SR-IOV")
Co-developed-by: Piotr Skajewski <[email protected]>
Signed-off-by: Piotr Skajewski <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
Co-developed-by: Mateusz Palczewski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 988db46bff0e..214a38de3f41 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -467,12 +467,16 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
return err;
}
-static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
+static int ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 max_frame, u32 vf)
{
struct ixgbe_hw *hw = &adapter->hw;
- int max_frame = msgbuf[1];
u32 max_frs;
+ if (max_frame < ETH_MIN_MTU || max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
+ e_err(drv, "VF max_frame %d out of range\n", max_frame);
+ return -EINVAL;
+ }
+
/*
* For 82599EB we have to keep all PFs and VFs operating with
* the same max_frame value in order to avoid sending an oversize
@@ -533,12 +537,6 @@ static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
}
}
- /* MTU < 68 is an error and causes problems on some kernels */
- if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
- e_err(drv, "VF max_frame %d out of range\n", max_frame);
- return -EINVAL;
- }
-
/* pull current max frame size from hardware */
max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
max_frs &= IXGBE_MHADD_MFS_MASK;
@@ -1249,7 +1247,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
break;
case IXGBE_VF_SET_LPE:
- retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
+ retval = ixgbe_set_vf_lpe(adapter, msgbuf[1], vf);
break;
case IXGBE_VF_SET_MACVLAN:
retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
--
2.30.2
From: kernel test robot <[email protected]>
[ Upstream commit 2b899f31f1a6db2db4608bac2ac04fe2c4ad89eb ]
sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?
Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/mixer_scarlett_gen2.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 01ffef6a5146..9a98b0c048e3 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -1997,8 +1997,8 @@ static int scarlett2_mixer_status_create(struct usb_mixer_interface *mixer)
return usb_submit_urb(mixer->urb, GFP_KERNEL);
}
-int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer,
- const struct scarlett2_device_info *info)
+static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer,
+ const struct scarlett2_device_info *info)
{
int err;
--
2.30.2
From: Zhang Xiaoxu <[email protected]>
commit e67afa7ee4a59584d7253e45d7f63b9528819a13 upstream.
Since commit bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.
This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.
Fixes: bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors")
Cc: <stable.vger.kernel.org> # 4.2
Signed-off-by: Zhang Xiaoxu <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -211,7 +211,7 @@ static loff_t nfs4_file_llseek(struct fi
case SEEK_HOLE:
case SEEK_DATA:
ret = nfs42_proc_llseek(filep, offset, whence);
- if (ret != -ENOTSUPP)
+ if (ret != -EOPNOTSUPP)
return ret;
fallthrough;
default:
On Mon, 31 May 2021 15:11:05 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.10.42 release.
> There are 252 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.42-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.10.42-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
Hi!
> This is the start of the stable review cycle for the 5.10.42 release.
> There are 252 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> From: Ondrej Mosnacek <[email protected]>
...
> Fixes: 794edf30ee6c ("lockdown: Lock down TIOCSSERIAL")
> Acked-by: Kees Cook <[email protected]>
> Signed-off-by: Ondrej Mosnacek <[email protected]>
> Cc: stable <[email protected]>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
I'm not sure if it is going to cause any problems, but two signoffs
like this look quite unusual.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 5/31/2021 6:11 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.42 release.
> There are 252 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.42-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Mon, 31 May 2021 at 19:03, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.42 release.
> There are 252 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.42-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.42-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 2a1bdede969e234cf4e4e8d31566ea1804d3b443
* git describe: v5.10.40-263-g2a1bdede969e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.40-263-g2a1bdede969e
## No regressions (compared to v5.10.40-10-gec1cc3ee7be2)
## No fixes (compared to v5.10.40-10-gec1cc3ee7be2)
## Test result summary
total: 74784, pass: 63100, fail: 550, skip: 10569, xfail: 565,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* i386: 25 total, 25 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed
## Test suites summary
* fwts
* kselftest-android
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* v4l2-compliance
--
Naresh Kamboju
https://lkft.linaro.org
On 2021/5/31 21:11, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.42 release.
> There are 252 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.42-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.10.42-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.42-rc1
Commit: 2a1bdede969e234cf4e4e8d31566ea1804d3b443
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8898
passed: 8898
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8898
passed: 8898
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
Hi!
So this changes bool variables to u8:1, but still assigns true/false
there, which looks like "interesting" style. Should we switch to 0/1?
Best regards,
Pavel
> --- a/net/mac80211/rx.c
> +++ b/net/mac80211/rx.c
> @@ -2284,6 +2284,7 @@ ieee80211_rx_h_defragment(struct ieee802
> * next fragment has a sequential PN value.
> */
> entry->check_sequential_pn = true;
> + entry->is_protected = true;
> entry->key_color = rx->key->color;
> memcpy(entry->last_pn,
> rx->key->u.ccmp.rx_pn[queue],
> @@ -2296,6 +2297,9 @@ ieee80211_rx_h_defragment(struct ieee802
> sizeof(rx->key->u.gcmp.rx_pn[queue]));
> BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN !=
> IEEE80211_GCMP_PN_LEN);
> + } else if (rx->key && ieee80211_has_protected(fc)) {
> + entry->is_protected = true;
> + entry->key_color = rx->key->color;
> }
> return RX_QUEUED;
> }
> @@ -2337,6 +2341,14 @@ ieee80211_rx_h_defragment(struct ieee802
> if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN))
> return RX_DROP_UNUSABLE;
> memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
> + } else if (entry->is_protected &&
> + (!rx->key || !ieee80211_has_protected(fc) ||
> + rx->key->color != entry->key_color)) {
> + /* Drop this as a mixed key or fragment cache attack, even
> + * if for TKIP Michael MIC should protect us, and WEP is a
> + * lost cause anyway.
> + */
> + return RX_DROP_UNUSABLE;
> }
>
> skb_pull(rx->skb, ieee80211_hdrlen(fc));
> --- a/net/mac80211/sta_info.h
> +++ b/net/mac80211/sta_info.h
> @@ -453,7 +453,8 @@ struct ieee80211_fragment_entry {
> u16 extra_len;
> u16 last_frag;
> u8 rx_queue;
> - bool check_sequential_pn; /* needed for CCMP/GCMP */
> + u8 check_sequential_pn:1, /* needed for CCMP/GCMP */
> + is_protected:1;
> u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
> unsigned int key_color;
> };
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, May 31, 2021 at 03:11:05PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.42 release.
> There are 252 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 455 pass: 455 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
Hi!
> From: kernel test robot <[email protected]>
>
> [ Upstream commit 2b899f31f1a6db2db4608bac2ac04fe2c4ad89eb ]
>
> sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?
>
> Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
> Reported-by: kernel test robot <[email protected]>
> Signed-off-by: kernel test robot <[email protected]>
> Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9
> Signed-off-by: Takashi Iwai <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
We normally require real, legal names for commit authors and
signoffs. I guess it is a bit late now, but... we don't take
pseudonyms so we should not take robots.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Sat, Jun 05, 2021 at 03:42:22PM +0200, Pavel Machek wrote:
> Hi!
>
> > From: kernel test robot <[email protected]>
> >
> > [ Upstream commit 2b899f31f1a6db2db4608bac2ac04fe2c4ad89eb ]
> >
> > sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?
> >
> > Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
> > Reported-by: kernel test robot <[email protected]>
> > Signed-off-by: kernel test robot <[email protected]>
> > Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9
> > Signed-off-by: Takashi Iwai <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
>
> We normally require real, legal names for commit authors and
> signoffs. I guess it is a bit late now, but... we don't take
> pseudonyms so we should not take robots.
We have long-taken patches from the kernel test robot, this is not
something new.
On Mon, 31 May 2021 at 16:06, Greg Kroah-Hartman
<[email protected]> wrote:
>
> From: Jingwen Chen <[email protected]>
>
> [ Upstream commit fa7e6abc75f3d491bc561734312d065dc9dc2a77 ]
>
> [Why]
> the gem object rfb->base.obj[0] is get according to num_planes
> in amdgpufb_create, but is not put according to num_planes
>
> [How]
> put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes
>
> Signed-off-by: Jingwen Chen <[email protected]>
> Acked-by: Christian König <[email protected]>
> Reviewed-by: Alex Deucher <[email protected]>
> Signed-off-by: Alex Deucher <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +++
> 1 file changed, 3 insertions(+)
The original commit looks like a partial fix for 37ac3dc00da0
("drm/amdgpu: Use device specific BO size & stride check.") which came
in v5.14. Or putting it differently: this does not look entirely good
without 37ac3dc00da0 which is a fix for f258907fdd83 ("drm/amdgpu:
Verify bo size can fit framebuffer size on init.") merged in v5.13.
Backporting it earlier might cause use-after-free errors (due to GEM
refcnt dropping too early).
Can the AMD guys:
1. Confirm where this should be backported (for example not for v4.19,
v5.4, v5.10, v5.12)?
2. Mark fixes with the "Fixes" tag so we know where the fix should go?
Please include such checks in your Acking and Reviewing (unless Acks
and Reviews are just formality, not a check).
Best regards,
Krzysztof