2021-06-02 15:06:03

by Dario Binacchi

[permalink] [raw]
Subject: [RESEND PATCH] pinctrl: single: config: enable the pin's input

It enables / disables the input buffer. As explained in the description
of 'enum pin_config_param' this does not affect the pin's ability to
drive output.

Signed-off-by: Dario Binacchi <[email protected]>

---

drivers/pinctrl/pinctrl-single.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 2c9c9835f375..4e7cdb9ee855 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -534,6 +534,7 @@ static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
case PIN_CONFIG_MODE_LOW_POWER:
+ case PIN_CONFIG_INPUT_ENABLE:
default:
*config = data;
break;
@@ -572,6 +573,7 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
case PIN_CONFIG_MODE_LOW_POWER:
+ case PIN_CONFIG_INPUT_ENABLE:
shift = ffs(func->conf[i].mask) - 1;
data &= ~func->conf[i].mask;
data |= (arg << shift) & func->conf[i].mask;
@@ -918,6 +920,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
static const struct pcs_conf_type prop2[] = {
{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
+ { "pinctrl-single,input-enable", PIN_CONFIG_INPUT_ENABLE, },
{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
{ "pinctrl-single,low-power-mode", PIN_CONFIG_MODE_LOW_POWER, },
};
--
2.17.1


2021-06-04 08:11:36

by Tony Lindgren

[permalink] [raw]
Subject: Re: [RESEND PATCH] pinctrl: single: config: enable the pin's input

* Dario Binacchi <[email protected]> [210602 15:04]:
> It enables / disables the input buffer. As explained in the description
> of 'enum pin_config_param' this does not affect the pin's ability to
> drive output.

Looks OK to me:

Acked-by: Tony Lindgren <[email protected]>

2021-06-07 07:06:51

by Linus Walleij

[permalink] [raw]
Subject: Re: [RESEND PATCH] pinctrl: single: config: enable the pin's input

On Wed, Jun 2, 2021 at 5:04 PM Dario Binacchi <[email protected]> wrote:

> It enables / disables the input buffer. As explained in the description
> of 'enum pin_config_param' this does not affect the pin's ability to
> drive output.
>
> Signed-off-by: Dario Binacchi <[email protected]>

Patch applied!

Yours,
Linus Walleij