During standby some PSUs turn off the microcontroller. A re-init is
required during resume or the microcontroller stays unresponsive.
Fixes: 726c945ab2eb ("hwmon: (corsair-psu) Remove unneeded semicolons")
Signed-off-by: Wilken Gottwalt <[email protected]>
---
drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index 02298b86b57b..731d5117f9f1 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo
return 0;
}
+#ifdef CONFIG_PM
+static int corsairpsu_resume(struct hid_device *hdev)
+{
+ struct corsairpsu_data *priv = hid_get_drvdata(hdev);
+
+ /* some PSUs turn off the microcontroller during standby, so a reinit is required */
+ return corsairpsu_init(priv);
+}
+#endif
+
static const struct hid_device_id corsairpsu_idtable[] = {
{ HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
{ HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
@@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
.probe = corsairpsu_probe,
.remove = corsairpsu_remove,
.raw_event = corsairpsu_raw_event,
+#ifdef CONFIG_PM
+ .resume = corsairpsu_resume,
+ .reset_resume = corsairpsu_resume,
+#endif
};
module_hid_driver(corsairpsu_driver);
--
2.31.1
On Thu, Jun 03, 2021 at 05:23:38AM +0000, Wilken Gottwalt wrote:
> During standby some PSUs turn off the microcontroller. A re-init is
> required during resume or the microcontroller stays unresponsive.
>
> Fixes: 726c945ab2eb ("hwmon: (corsair-psu) Remove unneeded semicolons")
That seems wrong. Removing semicolons doesn't typically introduce resume bugs.
This should fix the patch introducing the driver.
Guenter
> Signed-off-by: Wilken Gottwalt <[email protected]>
> ---
> drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> index 02298b86b57b..731d5117f9f1 100644
> --- a/drivers/hwmon/corsair-psu.c
> +++ b/drivers/hwmon/corsair-psu.c
> @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int corsairpsu_resume(struct hid_device *hdev)
> +{
> + struct corsairpsu_data *priv = hid_get_drvdata(hdev);
> +
> + /* some PSUs turn off the microcontroller during standby, so a reinit is required */
> + return corsairpsu_init(priv);
> +}
> +#endif
> +
> static const struct hid_device_id corsairpsu_idtable[] = {
> { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
> { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
> @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
> .probe = corsairpsu_probe,
> .remove = corsairpsu_remove,
> .raw_event = corsairpsu_raw_event,
> +#ifdef CONFIG_PM
> + .resume = corsairpsu_resume,
> + .reset_resume = corsairpsu_resume,
> +#endif
> };
> module_hid_driver(corsairpsu_driver);
>
> --
> 2.31.1
>
On Thu, 3 Jun 2021 03:41:56 -0700
Guenter Roeck <[email protected]> wrote:
> On Thu, Jun 03, 2021 at 05:23:38AM +0000, Wilken Gottwalt wrote:
> > During standby some PSUs turn off the microcontroller. A re-init is
> > required during resume or the microcontroller stays unresponsive.
> >
> > Fixes: 726c945ab2eb ("hwmon: (corsair-psu) Remove unneeded semicolons")
>
> That seems wrong. Removing semicolons doesn't typically introduce resume bugs.
> This should fix the patch introducing the driver.
Oh yes, you are right. Wasn't really thinking about it. I will send a proper
patch.
greetings,
Will
> Guenter
>
> > Signed-off-by: Wilken Gottwalt <[email protected]>
> > ---
> > drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> > index 02298b86b57b..731d5117f9f1 100644
> > --- a/drivers/hwmon/corsair-psu.c
> > +++ b/drivers/hwmon/corsair-psu.c
> > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report
> > *repo return 0;
> > }
> >
> > +#ifdef CONFIG_PM
> > +static int corsairpsu_resume(struct hid_device *hdev)
> > +{
> > + struct corsairpsu_data *priv = hid_get_drvdata(hdev);
> > +
> > + /* some PSUs turn off the microcontroller during standby, so a reinit is required */
> > + return corsairpsu_init(priv);
> > +}
> > +#endif
> > +
> > static const struct hid_device_id corsairpsu_idtable[] = {
> > { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
> > { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
> > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
> > .probe = corsairpsu_probe,
> > .remove = corsairpsu_remove,
> > .raw_event = corsairpsu_raw_event,
> > +#ifdef CONFIG_PM
> > + .resume = corsairpsu_resume,
> > + .reset_resume = corsairpsu_resume,
> > +#endif
> > };
> > module_hid_driver(corsairpsu_driver);
> >
> > --
> > 2.31.1
> >