sgpio-aspeed bindings should be converted to yaml format.
Signed-off-by: Steven Lee <[email protected]>
---
.../bindings/gpio/aspeed,sgpio.yaml | 75 +++++++++++++++++++
.../devicetree/bindings/gpio/sgpio-aspeed.txt | 46 ------------
2 files changed, 75 insertions(+), 46 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
new file mode 100644
index 000000000000..b2ae211411ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SGPIO controller
+
+maintainers:
+ - Andrew Jeffery <[email protected]>
+
+description:
+ This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
+ featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
+ support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity option (level-high, level-low, edge-high, edge-low)
+ - Support reset tolerance option for each output port
+ - Directly connected to APB bus and its shift clock is from APB bus clock
+ divided by a programmable value.
+ - Co-work with external signal-chained TTL components (74LV165/74LV595)
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-sgpio
+ - aspeed,ast2500-sgpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ clocks:
+ maxItems: 1
+
+ ngpios: true
+
+ bus-frequency: true
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - interrupt-controller
+ - ngpios
+ - clocks
+ - bus-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ sgpio: sgpio@1e780200 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2500-sgpio";
+ gpio-controller;
+ interrupts = <40>;
+ reg = <0x1e780200 0x0100>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ interrupt-controller;
+ ngpios = <80>;
+ bus-frequency = <12000000>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
deleted file mode 100644
index be329ea4794f..000000000000
--- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Aspeed SGPIO controller Device Tree Bindings
---------------------------------------------
-
-This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
-featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
-support the following options:
-- Support interrupt option for each input port and various interrupt
- sensitivity option (level-high, level-low, edge-high, edge-low)
-- Support reset tolerance option for each output port
-- Directly connected to APB bus and its shift clock is from APB bus clock
- divided by a programmable value.
-- Co-work with external signal-chained TTL components (74LV165/74LV595)
-
-Required properties:
-
-- compatible : Should be one of
- "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio"
-- #gpio-cells : Should be 2, see gpio.txt
-- reg : Address and length of the register set for the device
-- gpio-controller : Marks the device node as a GPIO controller
-- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
-- interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
- 2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
- output. Up to 80 pins, must be a multiple of 8.
-- clocks : A phandle to the APB clock for SGPM clock division
-- bus-frequency : SGPM CLK frequency
-
-The sgpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- Example:
- sgpio: sgpio@1e780200 {
- #gpio-cells = <2>;
- compatible = "aspeed,ast2500-sgpio";
- gpio-controller;
- interrupts = <40>;
- reg = <0x1e780200 0x0100>;
- clocks = <&syscon ASPEED_CLK_APB>;
- interrupt-controller;
- ngpios = <8>;
- bus-frequency = <12000000>;
- };
--
2.17.1