Hi,
This series adds support for another General Electric patient
monitor series (similar to existing Bx50v3), which is based on
i.MX6DL using Congatec's QMX6 module.
This series has a runtime dependency on two commits, that have
already been merged to linux-next:
1. Any imx6dl-qmx6 based boards without f765e349c3e1 ("rtc: m41t80:
add support for fixed clock") and CONFIG_RTC_DRV_M41T80 enabled
will result in unstable system. Because the kernel will disable
one of the CPU clocks.
2. Booting B155(P)v2 additionally requires 94dfec48fca7 ("drm/imx:
Add 8 pixel alignment fix") to avoid boot hanging indefinitely.
Changes since PATCHv2:
* https://lore.kernel.org/lkml/[email protected]/
* Add Acked-by from Rob Herring to patch DT binding patches
* Drop RTC and DRM patch (applied)
* order DT Makefile entries alphabetically
* order DT nodes alphabetically
* Remove a couple of superfluous status = 'okay';
* Move compatible property to start of nodes
* Move status property to end of nodes (but before sub-nodes)
* Drop useless fsl,spi-num-chipselects property
* Update pinctrl config for audio pins fixing noise issue affecting some boards
* rebased to v5.13-rc1
Changes since PATCHv1:
* https://lore.kernel.org/lkml/[email protected]/
* drop patch 5 (applied)
* instead of using 'protected-clocks' in RTC node, add fixed-clock
node as suggested by Saravana Kannan
* rebased to current master (68a32ba14177)
Thanks,
-- Sebastian
Sebastian Reichel (3):
dt-bindings: vendor-prefixes: add congatec
dt-bindings: arm: fsl: add GE B1x5pv2 boards
ARM: dts: imx6: Add GE B1x5v2
.../devicetree/bindings/arm/fsl.yaml | 11 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 5 +
arch/arm/boot/dts/imx6dl-b105pv2.dts | 32 +
arch/arm/boot/dts/imx6dl-b105v2.dts | 32 +
arch/arm/boot/dts/imx6dl-b125pv2.dts | 30 +
arch/arm/boot/dts/imx6dl-b125v2.dts | 30 +
arch/arm/boot/dts/imx6dl-b155v2.dts | 32 +
arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 413 ++++++++++++
arch/arm/boot/dts/imx6dl-b1x5v2.dtsi | 58 ++
arch/arm/boot/dts/imx6dl-qmx6.dtsi | 612 ++++++++++++++++++
11 files changed, 1257 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi
--
2.30.2
On Wed, May 26, 2021 at 05:22:40PM +0200, Sebastian Reichel wrote:
> Hi,
>
> This series adds support for another General Electric patient
> monitor series (similar to existing Bx50v3), which is based on
> i.MX6DL using Congatec's QMX6 module.
>
> This series has a runtime dependency on two commits, that have
> already been merged to linux-next:
>
> 1. Any imx6dl-qmx6 based boards without f765e349c3e1 ("rtc: m41t80:
> add support for fixed clock") and CONFIG_RTC_DRV_M41T80 enabled
> will result in unstable system. Because the kernel will disable
> one of the CPU clocks.
>
> 2. Booting B155(P)v2 additionally requires 94dfec48fca7 ("drm/imx:
> Add 8 pixel alignment fix") to avoid boot hanging indefinitely.
>
> Changes since PATCHv2:
> * https://lore.kernel.org/lkml/[email protected]/
> * Add Acked-by from Rob Herring to patch DT binding patches
> * Drop RTC and DRM patch (applied)
> * order DT Makefile entries alphabetically
> * order DT nodes alphabetically
> * Remove a couple of superfluous status = 'okay';
> * Move compatible property to start of nodes
> * Move status property to end of nodes (but before sub-nodes)
> * Drop useless fsl,spi-num-chipselects property
> * Update pinctrl config for audio pins fixing noise issue affecting some boards
> * rebased to v5.13-rc1
>
> Changes since PATCHv1:
> * https://lore.kernel.org/lkml/[email protected]/
> * drop patch 5 (applied)
> * instead of using 'protected-clocks' in RTC node, add fixed-clock
> node as suggested by Saravana Kannan
> * rebased to current master (68a32ba14177)
>
> Thanks,
>
> -- Sebastian
>
> Sebastian Reichel (3):
> dt-bindings: vendor-prefixes: add congatec
> dt-bindings: arm: fsl: add GE B1x5pv2 boards
> ARM: dts: imx6: Add GE B1x5v2
Applied all, thanks.