From: Ioana Ciornei <[email protected]>
Update the DTS nodes corresponding to the 4 10GBASE-R PHYs to describe
their IRQ lines.
Signed-off-by: Ioana Ciornei <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index 60563917be44..3e4e857db13f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -92,21 +92,25 @@ &emdio2 {
mdio2_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0x0>;
};
mdio2_phy2: ethernet-phy@1 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1>;
};
mdio2_phy3: ethernet-phy@2 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
reg = <0x2>;
};
mdio2_phy4: ethernet-phy@3 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
reg = <0x3>;
};
};
--
2.31.1