2021-06-16 09:02:27

by Kyle Tso

[permalink] [raw]
Subject: [PATCH v3] usb: typec: tcpm: Relax disconnect threshold during power negotiation

If the voltage is being decreased in power negotiation, the Source will
set the power supply to operate at the new voltage level before sending
PS_RDY. Relax the threshold before sending Request Message so that it
will not race with Source which begins to adjust the voltage right after
it sends Accept Message (PPS) or tSrcTransition (25~35ms) after it sends
Accept Message (non-PPS).

The real threshold will be set after Sink receives PS_RDY Message.

Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
Cc: Badhri Jagan Sridharan <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
---
Changes in v3:
- move the timing of setting threshold for Fixed RDO as I did for PPS in
v2, i.e. move it to tcpm_pd_send_request.
- add Cc: tag for Badhri
- update the commit message for the above changes

Changes in v2:
- move the timing of setting threshold up to "before sending Request"
for PPS power negotiation so that it won't race with the Source.
- PPS: if it fails to send the Request, fallback to previous threshold
- PPS: if the Source doesn't respond Accept, fallback to previous
threshold
- update the commit message for above changes

drivers/usb/typec/tcpm/tcpm.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 197556038ba4..b1d310ab84c4 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2604,6 +2604,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
} else {
next_state = SNK_WAIT_CAPABILITIES;
}
+
+ /* Threshold was relaxed before sending Request. Restore it back. */
+ tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+ port->pps_data.active,
+ port->supply_voltage);
tcpm_set_state(port, next_state, 0);
break;
case SNK_NEGOTIATE_PPS_CAPABILITIES:
@@ -2617,6 +2622,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
port->send_discover)
port->vdm_sm_running = true;

+ /* Threshold was relaxed before sending Request. Restore it back. */
+ tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+ port->pps_data.active,
+ port->supply_voltage);
+
tcpm_set_state(port, SNK_READY, 0);
break;
case DR_SWAP_SEND:
@@ -3336,6 +3346,12 @@ static int tcpm_pd_send_request(struct tcpm_port *port)
if (ret < 0)
return ret;

+ /*
+ * Relax the threshold as voltage will be adjusted after Accept Message plus tSrcTransition.
+ * It is safer to modify the threshold here.
+ */
+ tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
+
memset(&msg, 0, sizeof(msg));
msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
port->pwr_role,
@@ -3433,6 +3449,9 @@ static int tcpm_pd_send_pps_request(struct tcpm_port *port)
if (ret < 0)
return ret;

+ /* Relax the threshold as voltage will be adjusted right after Accept Message. */
+ tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
+
memset(&msg, 0, sizeof(msg));
msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
port->pwr_role,
@@ -4196,6 +4215,10 @@ static void run_state_machine(struct tcpm_port *port)
port->hard_reset_count = 0;
ret = tcpm_pd_send_request(port);
if (ret < 0) {
+ /* Restore back to the original state */
+ tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+ port->pps_data.active,
+ port->supply_voltage);
/* Let the Source send capabilities again. */
tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
} else {
@@ -4206,6 +4229,10 @@ static void run_state_machine(struct tcpm_port *port)
case SNK_NEGOTIATE_PPS_CAPABILITIES:
ret = tcpm_pd_send_pps_request(port);
if (ret < 0) {
+ /* Restore back to the original state */
+ tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
+ port->pps_data.active,
+ port->supply_voltage);
port->pps_status = ret;
/*
* If this was called due to updates to sink
--
2.32.0.272.g935e593368-goog


2021-06-16 19:51:13

by Heikki Krogerus

[permalink] [raw]
Subject: Re: [PATCH v3] usb: typec: tcpm: Relax disconnect threshold during power negotiation

On Wed, Jun 16, 2021 at 05:01:02PM +0800, Kyle Tso wrote:
> If the voltage is being decreased in power negotiation, the Source will
> set the power supply to operate at the new voltage level before sending
> PS_RDY. Relax the threshold before sending Request Message so that it
> will not race with Source which begins to adjust the voltage right after
> it sends Accept Message (PPS) or tSrcTransition (25~35ms) after it sends
> Accept Message (non-PPS).
>
> The real threshold will be set after Sink receives PS_RDY Message.
>
> Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
> Cc: Badhri Jagan Sridharan <[email protected]>
> Signed-off-by: Kyle Tso <[email protected]>

Acked-by: Heikki Krogerus <[email protected]>

> ---
> Changes in v3:
> - move the timing of setting threshold for Fixed RDO as I did for PPS in
> v2, i.e. move it to tcpm_pd_send_request.
> - add Cc: tag for Badhri
> - update the commit message for the above changes
>
> Changes in v2:
> - move the timing of setting threshold up to "before sending Request"
> for PPS power negotiation so that it won't race with the Source.
> - PPS: if it fails to send the Request, fallback to previous threshold
> - PPS: if the Source doesn't respond Accept, fallback to previous
> threshold
> - update the commit message for above changes
>
> drivers/usb/typec/tcpm/tcpm.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 197556038ba4..b1d310ab84c4 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -2604,6 +2604,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> } else {
> next_state = SNK_WAIT_CAPABILITIES;
> }
> +
> + /* Threshold was relaxed before sending Request. Restore it back. */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> + port->pps_data.active,
> + port->supply_voltage);
> tcpm_set_state(port, next_state, 0);
> break;
> case SNK_NEGOTIATE_PPS_CAPABILITIES:
> @@ -2617,6 +2622,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> port->send_discover)
> port->vdm_sm_running = true;
>
> + /* Threshold was relaxed before sending Request. Restore it back. */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> + port->pps_data.active,
> + port->supply_voltage);
> +
> tcpm_set_state(port, SNK_READY, 0);
> break;
> case DR_SWAP_SEND:
> @@ -3336,6 +3346,12 @@ static int tcpm_pd_send_request(struct tcpm_port *port)
> if (ret < 0)
> return ret;
>
> + /*
> + * Relax the threshold as voltage will be adjusted after Accept Message plus tSrcTransition.
> + * It is safer to modify the threshold here.
> + */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
> +
> memset(&msg, 0, sizeof(msg));
> msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
> port->pwr_role,
> @@ -3433,6 +3449,9 @@ static int tcpm_pd_send_pps_request(struct tcpm_port *port)
> if (ret < 0)
> return ret;
>
> + /* Relax the threshold as voltage will be adjusted right after Accept Message. */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
> +
> memset(&msg, 0, sizeof(msg));
> msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
> port->pwr_role,
> @@ -4196,6 +4215,10 @@ static void run_state_machine(struct tcpm_port *port)
> port->hard_reset_count = 0;
> ret = tcpm_pd_send_request(port);
> if (ret < 0) {
> + /* Restore back to the original state */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> + port->pps_data.active,
> + port->supply_voltage);
> /* Let the Source send capabilities again. */
> tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> } else {
> @@ -4206,6 +4229,10 @@ static void run_state_machine(struct tcpm_port *port)
> case SNK_NEGOTIATE_PPS_CAPABILITIES:
> ret = tcpm_pd_send_pps_request(port);
> if (ret < 0) {
> + /* Restore back to the original state */
> + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> + port->pps_data.active,
> + port->supply_voltage);
> port->pps_status = ret;
> /*
> * If this was called due to updates to sink
> --
> 2.32.0.272.g935e593368-goog

--
heikki

2021-06-17 02:49:55

by Badhri Jagan Sridharan

[permalink] [raw]
Subject: Re: [PATCH v3] usb: typec: tcpm: Relax disconnect threshold during power negotiation

On Wed, Jun 16, 2021 at 6:42 AM Heikki Krogerus
<[email protected]> wrote:
>
> On Wed, Jun 16, 2021 at 05:01:02PM +0800, Kyle Tso wrote:
> > If the voltage is being decreased in power negotiation, the Source will
> > set the power supply to operate at the new voltage level before sending
> > PS_RDY. Relax the threshold before sending Request Message so that it
> > will not race with Source which begins to adjust the voltage right after
> > it sends Accept Message (PPS) or tSrcTransition (25~35ms) after it sends
> > Accept Message (non-PPS).
> >
> > The real threshold will be set after Sink receives PS_RDY Message.
> >
> > Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
> > Cc: Badhri Jagan Sridharan <[email protected]>
> > Signed-off-by: Kyle Tso <[email protected]>
>
> Acked-by: Heikki Krogerus <[email protected]>
Reviewed-by: Badhri Jagan Sridharan <[email protected]>
>
> > ---
> > Changes in v3:
> > - move the timing of setting threshold for Fixed RDO as I did for PPS in
> > v2, i.e. move it to tcpm_pd_send_request.
> > - add Cc: tag for Badhri
> > - update the commit message for the above changes
> >
> > Changes in v2:
> > - move the timing of setting threshold up to "before sending Request"
> > for PPS power negotiation so that it won't race with the Source.
> > - PPS: if it fails to send the Request, fallback to previous threshold
> > - PPS: if the Source doesn't respond Accept, fallback to previous
> > threshold
> > - update the commit message for above changes
> >
> > drivers/usb/typec/tcpm/tcpm.c | 27 +++++++++++++++++++++++++++
> > 1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> > index 197556038ba4..b1d310ab84c4 100644
> > --- a/drivers/usb/typec/tcpm/tcpm.c
> > +++ b/drivers/usb/typec/tcpm/tcpm.c
> > @@ -2604,6 +2604,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> > } else {
> > next_state = SNK_WAIT_CAPABILITIES;
> > }
> > +
> > + /* Threshold was relaxed before sending Request. Restore it back. */
> > + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> > + port->pps_data.active,
> > + port->supply_voltage);
> > tcpm_set_state(port, next_state, 0);
> > break;
> > case SNK_NEGOTIATE_PPS_CAPABILITIES:
> > @@ -2617,6 +2622,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> > port->send_discover)
> > port->vdm_sm_running = true;
> >
> > + /* Threshold was relaxed before sending Request. Restore it back. */
> > + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> > + port->pps_data.active,
> > + port->supply_voltage);
> > +
> > tcpm_set_state(port, SNK_READY, 0);
> > break;
> > case DR_SWAP_SEND:
> > @@ -3336,6 +3346,12 @@ static int tcpm_pd_send_request(struct tcpm_port *port)
> > if (ret < 0)
> > return ret;
> >
> > + /*
> > + * Relax the threshold as voltage will be adjusted after Accept Message plus tSrcTransition.
> > + * It is safer to modify the threshold here.
> > + */
> > + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
> > +
> > memset(&msg, 0, sizeof(msg));
> > msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
> > port->pwr_role,
> > @@ -3433,6 +3449,9 @@ static int tcpm_pd_send_pps_request(struct tcpm_port *port)
> > if (ret < 0)
> > return ret;
> >
> > + /* Relax the threshold as voltage will be adjusted right after Accept Message. */
> > + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, 0);
> > +
> > memset(&msg, 0, sizeof(msg));
> > msg.header = PD_HEADER_LE(PD_DATA_REQUEST,
> > port->pwr_role,
> > @@ -4196,6 +4215,10 @@ static void run_state_machine(struct tcpm_port *port)
> > port->hard_reset_count = 0;
> > ret = tcpm_pd_send_request(port);
> > if (ret < 0) {
> > + /* Restore back to the original state */
> > + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> > + port->pps_data.active,
> > + port->supply_voltage);
> > /* Let the Source send capabilities again. */
> > tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
> > } else {
> > @@ -4206,6 +4229,10 @@ static void run_state_machine(struct tcpm_port *port)
> > case SNK_NEGOTIATE_PPS_CAPABILITIES:
> > ret = tcpm_pd_send_pps_request(port);
> > if (ret < 0) {
> > + /* Restore back to the original state */
> > + tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
> > + port->pps_data.active,
> > + port->supply_voltage);
> > port->pps_status = ret;
> > /*
> > * If this was called due to updates to sink
> > --
> > 2.32.0.272.g935e593368-goog
>
> --
> heikki