The shift setting can be calculated via the corresponding mask field,
so remove modeset_shift.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/mt6397-regulator.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c
index 0a30df5e414f..b9bf7ade1f8a 100644
--- a/drivers/regulator/mt6397-regulator.c
+++ b/drivers/regulator/mt6397-regulator.c
@@ -32,7 +32,6 @@ struct mt6397_regulator_info {
u32 vselctrl_mask;
u32 modeset_reg;
u32 modeset_mask;
- u32 modeset_shift;
};
#define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
@@ -61,7 +60,6 @@ struct mt6397_regulator_info {
.vselctrl_mask = BIT(1), \
.modeset_reg = _modeset_reg, \
.modeset_mask = BIT(_modeset_shift), \
- .modeset_shift = _modeset_shift \
}
#define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
@@ -175,11 +173,11 @@ static int mt6397_regulator_set_mode(struct regulator_dev *rdev,
goto err_mode;
}
- dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n",
- info->modeset_reg, info->modeset_mask,
- info->modeset_shift, val);
+ dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x\n",
+ info->modeset_reg, info->modeset_mask, val);
+
+ val <<= ffs(info->modeset_mask) - 1;
- val <<= info->modeset_shift;
ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
info->modeset_mask, val);
err_mode:
@@ -204,7 +202,10 @@ static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev)
return ret;
}
- switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+ regval &= info->modeset_mask;
+ regval >>= ffs(info->modeset_mask) - 1;
+
+ switch (regval) {
case MT6397_BUCK_MODE_AUTO:
return REGULATOR_MODE_NORMAL;
case MT6397_BUCK_MODE_FORCE_PWM:
--
2.25.1