These 2 functions only do I2C reads/writes and don't require any of the
private data of the driver.
They're also used in the PM suspend/resume part of the driver.
Converting them to take an i2c_client object as parameter simplifies things
a bit (especially in the suspend/resume) as the driver mostly needs the
reference for i2c_client, so no need to jump through hoops to get it from
the private data (as was done in many places).
The rfd77402_measure() function has also been converted to take an
i2c_client object, since it also does only I2C ops.
Signed-off-by: Alexandru Ardelean <[email protected]>
---
drivers/iio/proximity/rfd77402.c | 60 ++++++++++++++------------------
1 file changed, 27 insertions(+), 33 deletions(-)
diff --git a/drivers/iio/proximity/rfd77402.c b/drivers/iio/proximity/rfd77402.c
index 7a0472323f17..f349526421f3 100644
--- a/drivers/iio/proximity/rfd77402.c
+++ b/drivers/iio/proximity/rfd77402.c
@@ -90,18 +90,18 @@ static const struct iio_chan_spec rfd77402_channels[] = {
},
};
-static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
+static int rfd77402_set_state(struct i2c_client *client, u8 state, u16 check)
{
int ret;
- ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
+ ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
state | RFD77402_CMD_VALID);
if (ret < 0)
return ret;
usleep_range(10000, 20000);
- ret = i2c_smbus_read_word_data(data->client, RFD77402_STATUS_R);
+ ret = i2c_smbus_read_word_data(client, RFD77402_STATUS_R);
if (ret < 0)
return ret;
if ((ret & RFD77402_STATUS_PM_MASK) != check)
@@ -110,24 +110,24 @@ static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
return 0;
}
-static int rfd77402_measure(struct rfd77402_data *data)
+static int rfd77402_measure(struct i2c_client *client)
{
int ret;
int tries = 10;
- ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
+ ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
RFD77402_STATUS_MCPU_ON);
if (ret < 0)
return ret;
- ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
+ ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
RFD77402_CMD_SINGLE |
RFD77402_CMD_VALID);
if (ret < 0)
goto err;
while (tries-- > 0) {
- ret = i2c_smbus_read_byte_data(data->client, RFD77402_ICSR);
+ ret = i2c_smbus_read_byte_data(client, RFD77402_ICSR);
if (ret < 0)
goto err;
if (ret & RFD77402_ICSR_RESULT)
@@ -140,7 +140,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
goto err;
}
- ret = i2c_smbus_read_word_data(data->client, RFD77402_RESULT_R);
+ ret = i2c_smbus_read_word_data(client, RFD77402_RESULT_R);
if (ret < 0)
goto err;
@@ -153,7 +153,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
return (ret & RFD77402_RESULT_DIST_MASK) >> 2;
err:
- rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
+ rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
RFD77402_STATUS_MCPU_OFF);
return ret;
}
@@ -168,7 +168,7 @@ static int rfd77402_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&data->lock);
- ret = rfd77402_measure(data);
+ ret = rfd77402_measure(data->client);
mutex_unlock(&data->lock);
if (ret < 0)
return ret;
@@ -188,23 +188,23 @@ static const struct iio_info rfd77402_info = {
.read_raw = rfd77402_read_raw,
};
-static int rfd77402_init(struct rfd77402_data *data)
+static int rfd77402_init(struct i2c_client *client)
{
int ret, i;
- ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
+ ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
RFD77402_STATUS_STANDBY);
if (ret < 0)
return ret;
/* configure INT pad as push-pull, active low */
- ret = i2c_smbus_write_byte_data(data->client, RFD77402_ICSR,
+ ret = i2c_smbus_write_byte_data(client, RFD77402_ICSR,
RFD77402_ICSR_INT_MODE);
if (ret < 0)
return ret;
/* I2C configuration */
- ret = i2c_smbus_write_word_data(data->client, RFD77402_I2C_INIT_CFG,
+ ret = i2c_smbus_write_word_data(client, RFD77402_I2C_INIT_CFG,
RFD77402_I2C_ADDR_INCR |
RFD77402_I2C_DATA_INCR |
RFD77402_I2C_HOST_DEBUG |
@@ -213,42 +213,42 @@ static int rfd77402_init(struct rfd77402_data *data)
return ret;
/* set initialization */
- ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0500);
+ ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0500);
if (ret < 0)
return ret;
- ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
+ ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
RFD77402_STATUS_MCPU_OFF);
if (ret < 0)
return ret;
/* set initialization */
- ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0600);
+ ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0600);
if (ret < 0)
return ret;
- ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
+ ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
RFD77402_STATUS_MCPU_ON);
if (ret < 0)
return ret;
for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) {
- ret = i2c_smbus_write_word_data(data->client,
+ ret = i2c_smbus_write_word_data(client,
rf77402_tof_config[i].reg,
rf77402_tof_config[i].val);
if (ret < 0)
return ret;
}
- ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
+ ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
RFD77402_STATUS_STANDBY);
return ret;
}
-static int rfd77402_powerdown(struct rfd77402_data *data)
+static int rfd77402_powerdown(struct i2c_client *client)
{
- return rfd77402_set_state(data, RFD77402_CMD_STANDBY,
+ return rfd77402_set_state(client, RFD77402_CMD_STANDBY,
RFD77402_STATUS_STANDBY);
}
@@ -280,7 +280,7 @@ static int rfd77402_probe(struct i2c_client *client,
indio_dev->name = RFD77402_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
- ret = rfd77402_init(data);
+ ret = rfd77402_init(client);
if (ret < 0)
return ret;
@@ -291,7 +291,7 @@ static int rfd77402_probe(struct i2c_client *client,
return 0;
err_powerdown:
- rfd77402_powerdown(data);
+ rfd77402_powerdown(client);
return ret;
}
@@ -300,7 +300,7 @@ static int rfd77402_remove(struct i2c_client *client)
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
- rfd77402_powerdown(iio_priv(indio_dev));
+ rfd77402_powerdown(client);
return 0;
}
@@ -308,18 +308,12 @@ static int rfd77402_remove(struct i2c_client *client)
#ifdef CONFIG_PM_SLEEP
static int rfd77402_suspend(struct device *dev)
{
- struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
- to_i2c_client(dev)));
-
- return rfd77402_powerdown(data);
+ return rfd77402_powerdown(to_i2c_client(dev));
}
static int rfd77402_resume(struct device *dev)
{
- struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
- to_i2c_client(dev)));
-
- return rfd77402_init(data);
+ return rfd77402_init(to_i2c_client(dev));
}
#endif
--
2.31.1
On Wed, 30 Jun 2021 16:16:35 +0300
Alexandru Ardelean <[email protected]> wrote:
> These 2 functions only do I2C reads/writes and don't require any of the
> private data of the driver.
>
> They're also used in the PM suspend/resume part of the driver.
>
> Converting them to take an i2c_client object as parameter simplifies things
> a bit (especially in the suspend/resume) as the driver mostly needs the
> reference for i2c_client, so no need to jump through hoops to get it from
> the private data (as was done in many places).
>
> The rfd77402_measure() function has also been converted to take an
> i2c_client object, since it also does only I2C ops.
Not sure I'd have bothered with this function, but it doesn't hurt
and is perhaps more consistent than leaving it alone..
>
> Signed-off-by: Alexandru Ardelean <[email protected]>
+CC Peter
I'm fine with this change, but it should sit on the list a little longer
(not to mention I'm not taking anything today anyway as mid merge window!)
Jonathan
> ---
> drivers/iio/proximity/rfd77402.c | 60 ++++++++++++++------------------
> 1 file changed, 27 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/iio/proximity/rfd77402.c b/drivers/iio/proximity/rfd77402.c
> index 7a0472323f17..f349526421f3 100644
> --- a/drivers/iio/proximity/rfd77402.c
> +++ b/drivers/iio/proximity/rfd77402.c
> @@ -90,18 +90,18 @@ static const struct iio_chan_spec rfd77402_channels[] = {
> },
> };
>
> -static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
> +static int rfd77402_set_state(struct i2c_client *client, u8 state, u16 check)
> {
> int ret;
>
> - ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
> + ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
> state | RFD77402_CMD_VALID);
> if (ret < 0)
> return ret;
>
> usleep_range(10000, 20000);
>
> - ret = i2c_smbus_read_word_data(data->client, RFD77402_STATUS_R);
> + ret = i2c_smbus_read_word_data(client, RFD77402_STATUS_R);
> if (ret < 0)
> return ret;
> if ((ret & RFD77402_STATUS_PM_MASK) != check)
> @@ -110,24 +110,24 @@ static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
> return 0;
> }
>
> -static int rfd77402_measure(struct rfd77402_data *data)
> +static int rfd77402_measure(struct i2c_client *client)
> {
> int ret;
> int tries = 10;
>
> - ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
> + ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
> RFD77402_STATUS_MCPU_ON);
> if (ret < 0)
> return ret;
>
> - ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
> + ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
> RFD77402_CMD_SINGLE |
> RFD77402_CMD_VALID);
> if (ret < 0)
> goto err;
>
> while (tries-- > 0) {
> - ret = i2c_smbus_read_byte_data(data->client, RFD77402_ICSR);
> + ret = i2c_smbus_read_byte_data(client, RFD77402_ICSR);
> if (ret < 0)
> goto err;
> if (ret & RFD77402_ICSR_RESULT)
> @@ -140,7 +140,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
> goto err;
> }
>
> - ret = i2c_smbus_read_word_data(data->client, RFD77402_RESULT_R);
> + ret = i2c_smbus_read_word_data(client, RFD77402_RESULT_R);
> if (ret < 0)
> goto err;
>
> @@ -153,7 +153,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
> return (ret & RFD77402_RESULT_DIST_MASK) >> 2;
>
> err:
> - rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
> + rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
> RFD77402_STATUS_MCPU_OFF);
> return ret;
> }
> @@ -168,7 +168,7 @@ static int rfd77402_read_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> mutex_lock(&data->lock);
> - ret = rfd77402_measure(data);
> + ret = rfd77402_measure(data->client);
> mutex_unlock(&data->lock);
> if (ret < 0)
> return ret;
> @@ -188,23 +188,23 @@ static const struct iio_info rfd77402_info = {
> .read_raw = rfd77402_read_raw,
> };
>
> -static int rfd77402_init(struct rfd77402_data *data)
> +static int rfd77402_init(struct i2c_client *client)
> {
> int ret, i;
>
> - ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> + ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> RFD77402_STATUS_STANDBY);
> if (ret < 0)
> return ret;
>
> /* configure INT pad as push-pull, active low */
> - ret = i2c_smbus_write_byte_data(data->client, RFD77402_ICSR,
> + ret = i2c_smbus_write_byte_data(client, RFD77402_ICSR,
> RFD77402_ICSR_INT_MODE);
> if (ret < 0)
> return ret;
>
> /* I2C configuration */
> - ret = i2c_smbus_write_word_data(data->client, RFD77402_I2C_INIT_CFG,
> + ret = i2c_smbus_write_word_data(client, RFD77402_I2C_INIT_CFG,
> RFD77402_I2C_ADDR_INCR |
> RFD77402_I2C_DATA_INCR |
> RFD77402_I2C_HOST_DEBUG |
> @@ -213,42 +213,42 @@ static int rfd77402_init(struct rfd77402_data *data)
> return ret;
>
> /* set initialization */
> - ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0500);
> + ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0500);
> if (ret < 0)
> return ret;
>
> - ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
> + ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
> RFD77402_STATUS_MCPU_OFF);
> if (ret < 0)
> return ret;
>
> /* set initialization */
> - ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0600);
> + ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0600);
> if (ret < 0)
> return ret;
>
> - ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
> + ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
> RFD77402_STATUS_MCPU_ON);
> if (ret < 0)
> return ret;
>
> for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) {
> - ret = i2c_smbus_write_word_data(data->client,
> + ret = i2c_smbus_write_word_data(client,
> rf77402_tof_config[i].reg,
> rf77402_tof_config[i].val);
> if (ret < 0)
> return ret;
> }
>
> - ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> + ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> RFD77402_STATUS_STANDBY);
>
> return ret;
> }
>
> -static int rfd77402_powerdown(struct rfd77402_data *data)
> +static int rfd77402_powerdown(struct i2c_client *client)
> {
> - return rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> + return rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> RFD77402_STATUS_STANDBY);
> }
>
> @@ -280,7 +280,7 @@ static int rfd77402_probe(struct i2c_client *client,
> indio_dev->name = RFD77402_DRV_NAME;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> - ret = rfd77402_init(data);
> + ret = rfd77402_init(client);
> if (ret < 0)
> return ret;
>
> @@ -291,7 +291,7 @@ static int rfd77402_probe(struct i2c_client *client,
> return 0;
>
> err_powerdown:
> - rfd77402_powerdown(data);
> + rfd77402_powerdown(client);
> return ret;
> }
>
> @@ -300,7 +300,7 @@ static int rfd77402_remove(struct i2c_client *client)
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
>
> iio_device_unregister(indio_dev);
> - rfd77402_powerdown(iio_priv(indio_dev));
> + rfd77402_powerdown(client);
>
> return 0;
> }
> @@ -308,18 +308,12 @@ static int rfd77402_remove(struct i2c_client *client)
> #ifdef CONFIG_PM_SLEEP
> static int rfd77402_suspend(struct device *dev)
> {
> - struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
> - to_i2c_client(dev)));
> -
> - return rfd77402_powerdown(data);
> + return rfd77402_powerdown(to_i2c_client(dev));
> }
>
> static int rfd77402_resume(struct device *dev)
> {
> - struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
> - to_i2c_client(dev)));
> -
> - return rfd77402_init(data);
> + return rfd77402_init(to_i2c_client(dev));
> }
> #endif
>
On Sat, 3 Jul 2021 18:05:09 +0100
Jonathan Cameron <[email protected]> wrote:
> On Wed, 30 Jun 2021 16:16:35 +0300
> Alexandru Ardelean <[email protected]> wrote:
>
> > These 2 functions only do I2C reads/writes and don't require any of the
> > private data of the driver.
> >
> > They're also used in the PM suspend/resume part of the driver.
> >
> > Converting them to take an i2c_client object as parameter simplifies things
> > a bit (especially in the suspend/resume) as the driver mostly needs the
> > reference for i2c_client, so no need to jump through hoops to get it from
> > the private data (as was done in many places).
> >
> > The rfd77402_measure() function has also been converted to take an
> > i2c_client object, since it also does only I2C ops.
> Not sure I'd have bothered with this function, but it doesn't hurt
> and is perhaps more consistent than leaving it alone..
> >
> > Signed-off-by: Alexandru Ardelean <[email protected]>
> +CC Peter
>
> I'm fine with this change, but it should sit on the list a little longer
> (not to mention I'm not taking anything today anyway as mid merge window!)
Enough time I think.
Series applied,
Thanks,
Jonathan
>
> Jonathan
>
>
> > ---
> > drivers/iio/proximity/rfd77402.c | 60 ++++++++++++++------------------
> > 1 file changed, 27 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/iio/proximity/rfd77402.c b/drivers/iio/proximity/rfd77402.c
> > index 7a0472323f17..f349526421f3 100644
> > --- a/drivers/iio/proximity/rfd77402.c
> > +++ b/drivers/iio/proximity/rfd77402.c
> > @@ -90,18 +90,18 @@ static const struct iio_chan_spec rfd77402_channels[] = {
> > },
> > };
> >
> > -static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
> > +static int rfd77402_set_state(struct i2c_client *client, u8 state, u16 check)
> > {
> > int ret;
> >
> > - ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
> > + ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
> > state | RFD77402_CMD_VALID);
> > if (ret < 0)
> > return ret;
> >
> > usleep_range(10000, 20000);
> >
> > - ret = i2c_smbus_read_word_data(data->client, RFD77402_STATUS_R);
> > + ret = i2c_smbus_read_word_data(client, RFD77402_STATUS_R);
> > if (ret < 0)
> > return ret;
> > if ((ret & RFD77402_STATUS_PM_MASK) != check)
> > @@ -110,24 +110,24 @@ static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check)
> > return 0;
> > }
> >
> > -static int rfd77402_measure(struct rfd77402_data *data)
> > +static int rfd77402_measure(struct i2c_client *client)
> > {
> > int ret;
> > int tries = 10;
> >
> > - ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
> > + ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
> > RFD77402_STATUS_MCPU_ON);
> > if (ret < 0)
> > return ret;
> >
> > - ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R,
> > + ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
> > RFD77402_CMD_SINGLE |
> > RFD77402_CMD_VALID);
> > if (ret < 0)
> > goto err;
> >
> > while (tries-- > 0) {
> > - ret = i2c_smbus_read_byte_data(data->client, RFD77402_ICSR);
> > + ret = i2c_smbus_read_byte_data(client, RFD77402_ICSR);
> > if (ret < 0)
> > goto err;
> > if (ret & RFD77402_ICSR_RESULT)
> > @@ -140,7 +140,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
> > goto err;
> > }
> >
> > - ret = i2c_smbus_read_word_data(data->client, RFD77402_RESULT_R);
> > + ret = i2c_smbus_read_word_data(client, RFD77402_RESULT_R);
> > if (ret < 0)
> > goto err;
> >
> > @@ -153,7 +153,7 @@ static int rfd77402_measure(struct rfd77402_data *data)
> > return (ret & RFD77402_RESULT_DIST_MASK) >> 2;
> >
> > err:
> > - rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
> > + rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
> > RFD77402_STATUS_MCPU_OFF);
> > return ret;
> > }
> > @@ -168,7 +168,7 @@ static int rfd77402_read_raw(struct iio_dev *indio_dev,
> > switch (mask) {
> > case IIO_CHAN_INFO_RAW:
> > mutex_lock(&data->lock);
> > - ret = rfd77402_measure(data);
> > + ret = rfd77402_measure(data->client);
> > mutex_unlock(&data->lock);
> > if (ret < 0)
> > return ret;
> > @@ -188,23 +188,23 @@ static const struct iio_info rfd77402_info = {
> > .read_raw = rfd77402_read_raw,
> > };
> >
> > -static int rfd77402_init(struct rfd77402_data *data)
> > +static int rfd77402_init(struct i2c_client *client)
> > {
> > int ret, i;
> >
> > - ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> > + ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> > RFD77402_STATUS_STANDBY);
> > if (ret < 0)
> > return ret;
> >
> > /* configure INT pad as push-pull, active low */
> > - ret = i2c_smbus_write_byte_data(data->client, RFD77402_ICSR,
> > + ret = i2c_smbus_write_byte_data(client, RFD77402_ICSR,
> > RFD77402_ICSR_INT_MODE);
> > if (ret < 0)
> > return ret;
> >
> > /* I2C configuration */
> > - ret = i2c_smbus_write_word_data(data->client, RFD77402_I2C_INIT_CFG,
> > + ret = i2c_smbus_write_word_data(client, RFD77402_I2C_INIT_CFG,
> > RFD77402_I2C_ADDR_INCR |
> > RFD77402_I2C_DATA_INCR |
> > RFD77402_I2C_HOST_DEBUG |
> > @@ -213,42 +213,42 @@ static int rfd77402_init(struct rfd77402_data *data)
> > return ret;
> >
> > /* set initialization */
> > - ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0500);
> > + ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0500);
> > if (ret < 0)
> > return ret;
> >
> > - ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF,
> > + ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
> > RFD77402_STATUS_MCPU_OFF);
> > if (ret < 0)
> > return ret;
> >
> > /* set initialization */
> > - ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0600);
> > + ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0600);
> > if (ret < 0)
> > return ret;
> >
> > - ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON,
> > + ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
> > RFD77402_STATUS_MCPU_ON);
> > if (ret < 0)
> > return ret;
> >
> > for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) {
> > - ret = i2c_smbus_write_word_data(data->client,
> > + ret = i2c_smbus_write_word_data(client,
> > rf77402_tof_config[i].reg,
> > rf77402_tof_config[i].val);
> > if (ret < 0)
> > return ret;
> > }
> >
> > - ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> > + ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> > RFD77402_STATUS_STANDBY);
> >
> > return ret;
> > }
> >
> > -static int rfd77402_powerdown(struct rfd77402_data *data)
> > +static int rfd77402_powerdown(struct i2c_client *client)
> > {
> > - return rfd77402_set_state(data, RFD77402_CMD_STANDBY,
> > + return rfd77402_set_state(client, RFD77402_CMD_STANDBY,
> > RFD77402_STATUS_STANDBY);
> > }
> >
> > @@ -280,7 +280,7 @@ static int rfd77402_probe(struct i2c_client *client,
> > indio_dev->name = RFD77402_DRV_NAME;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > - ret = rfd77402_init(data);
> > + ret = rfd77402_init(client);
> > if (ret < 0)
> > return ret;
> >
> > @@ -291,7 +291,7 @@ static int rfd77402_probe(struct i2c_client *client,
> > return 0;
> >
> > err_powerdown:
> > - rfd77402_powerdown(data);
> > + rfd77402_powerdown(client);
> > return ret;
> > }
> >
> > @@ -300,7 +300,7 @@ static int rfd77402_remove(struct i2c_client *client)
> > struct iio_dev *indio_dev = i2c_get_clientdata(client);
> >
> > iio_device_unregister(indio_dev);
> > - rfd77402_powerdown(iio_priv(indio_dev));
> > + rfd77402_powerdown(client);
> >
> > return 0;
> > }
> > @@ -308,18 +308,12 @@ static int rfd77402_remove(struct i2c_client *client)
> > #ifdef CONFIG_PM_SLEEP
> > static int rfd77402_suspend(struct device *dev)
> > {
> > - struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
> > - to_i2c_client(dev)));
> > -
> > - return rfd77402_powerdown(data);
> > + return rfd77402_powerdown(to_i2c_client(dev));
> > }
> >
> > static int rfd77402_resume(struct device *dev)
> > {
> > - struct rfd77402_data *data = iio_priv(i2c_get_clientdata(
> > - to_i2c_client(dev)));
> > -
> > - return rfd77402_init(data);
> > + return rfd77402_init(to_i2c_client(dev));
> > }
> > #endif
> >
>