Add the dt-bindings and the driver for ADXL355 3-axis MEMS Accelerometer.
Changes since v4:
1. Fix errors reported by sparse.
Changes since v3:
1. Fix errors in yaml DT doc.
2. Change SPDX-License-Identifier to GPL-2.0-only OR BSD-2-Clause
Changes since v2:
1. Add separate DT binding doc in yaml.
2. Use ____cacheline_aligned buffer for regmap_bulk_read/write calls.
3. Make code consistent by using same style in switch case.
4. Use FIELD_PREP in place of custom macros.
5. Make Kconfig description more informative.
Changes since v1:
1. Remove the declarations for static regmap structures from adxl355.h.
This was missed in the v1 and caused errors.
2. Make switch case statements consistent by directly returning from
each case rather than saving the return in a variable.
3. Some coding style changes.
Changes since v0:
1. Move adxl355_hpf_3db_table to adxl355_data structure. This is done to make
sure that each device gets its own table.
2. Make local regmap definitions private to adxl355_core.c.
3. Other minor coding style changes.
Puranjay Mohan (2):
dt-bindings: iio: accel: Add DT binding doc for ADXL355
iio: accel: Add driver support for ADXL355
.../bindings/iio/accel/adi,adxl355.yaml | 76 +++
MAINTAINERS | 7 +
drivers/iio/accel/Kconfig | 29 +
drivers/iio/accel/Makefile | 3 +
drivers/iio/accel/adxl355.h | 77 +++
drivers/iio/accel/adxl355_core.c | 542 ++++++++++++++++++
drivers/iio/accel/adxl355_i2c.c | 63 ++
drivers/iio/accel/adxl355_spi.c | 66 +++
8 files changed, 863 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
create mode 100644 drivers/iio/accel/adxl355.h
create mode 100644 drivers/iio/accel/adxl355_core.c
create mode 100644 drivers/iio/accel/adxl355_i2c.c
create mode 100644 drivers/iio/accel/adxl355_spi.c
--
2.30.1
Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer.
Signed-off-by: Puranjay Mohan <[email protected]>
---
.../bindings/iio/accel/adi,adxl355.yaml | 76 +++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
new file mode 100644
index 000000000..6e0652ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+
+maintainers:
+ - Puranjay Mohan <[email protected]>
+
+description: |
+ Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
+ both I2C & SPI interfaces
+ https://www.analog.com/en/products/adxl355.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adxl355
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: DRDY PIN
+ - description: INT1 PIN
+ - description: INT2 PIN
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+ vddio-supply:
+ description: Regulator that provides power to the bus
+
+ spi-max-frequency: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a I2C device node */
+ accelerometer@1d {
+ compatible = "adi,adxl355";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@0 {
+ compatible = "adi,adxl355";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
--
2.30.1