As we know, spi core layer has removed spi_set_cs_timing() API.
So this patch moved spi_delay for cs_timing from spi_controller
to spi_device, because cs timing should be set by spi_device but
not controller.
Signed-off-by: Mason Zhang <[email protected]>
---
drivers/spi/spi.c | 6 +++---
include/linux/spi/spi.h | 20 +++++++++-----------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c99181165321..5d68e6cd2a18 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -842,9 +842,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
if (activate)
- spi_delay_exec(&spi->controller->cs_setup, NULL);
+ spi_delay_exec(&spi->cs_setup, NULL);
else
- spi_delay_exec(&spi->controller->cs_hold, NULL);
+ spi_delay_exec(&spi->cs_hold, NULL);
}
if (spi->mode & SPI_CS_HIGH)
@@ -887,7 +887,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
!spi->controller->set_cs_timing) {
if (!activate)
- spi_delay_exec(&spi->controller->cs_inactive, NULL);
+ spi_delay_exec(&spi->cs_inactive, NULL);
}
}
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 97b8d12b5f2b..651e19ba3415 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -147,7 +147,11 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
* not using a GPIO line)
* @word_delay: delay to be inserted between consecutive
* words of a transfer
- *
+ * @cs_setup: delay to be introduced by the controller after CS is asserted
+ * @cs_hold: delay to be introduced by the controller before CS is deasserted
+ * @cs_inactive: delay to be introduced by the controller after CS is
+ * deasserted. If @cs_change_delay is used from @spi_transfer, then the
+ * two delays will be added up.
* @statistics: statistics for the spi_device
*
* A @spi_device is used to interchange data between an SPI slave
@@ -188,6 +192,10 @@ struct spi_device {
int cs_gpio; /* LEGACY: chip select gpio */
struct gpio_desc *cs_gpiod; /* chip select gpio desc */
struct spi_delay word_delay; /* inter-word delay */
+ /* CS delays */
+ struct spi_delay cs_setup;
+ struct spi_delay cs_hold;
+ struct spi_delay cs_inactive;
/* the statistics */
struct spi_statistics statistics;
@@ -412,11 +420,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
* controller has native support for memory like operations.
* @unprepare_message: undo any work done by prepare_message().
* @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @cs_setup: delay to be introduced by the controller after CS is asserted
- * @cs_hold: delay to be introduced by the controller before CS is deasserted
- * @cs_inactive: delay to be introduced by the controller after CS is
- * deasserted. If @cs_change_delay is used from @spi_transfer, then the
- * two delays will be added up.
* @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per
* CS number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods
@@ -638,11 +641,6 @@ struct spi_controller {
/* Optimized handlers for SPI memory-like operations. */
const struct spi_controller_mem_ops *mem_ops;
- /* CS delays */
- struct spi_delay cs_setup;
- struct spi_delay cs_hold;
- struct spi_delay cs_inactive;
-
/* gpio chip select */
int *cs_gpios;
struct gpio_desc **cs_gpiods;
--
2.18.0