Since the EMMC pins can be used for other functions as well, we need to
configure the pinctrl.
Signed-off-by: Michael Riesch <[email protected]>
---
v3:
- revise alias
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 1c34d529b771..1bc79e95b2fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -17,6 +17,7 @@
ethernet0 = &gmac0;
ethernet1 = &gmac1;
mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
};
chosen: chosen {
@@ -363,6 +364,8 @@
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
--
2.17.1