Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
On 8/6/2021 10:44 PM, Matthew Hagan wrote:
> Changes from v2:
> - Introduce boards to Makefile in same patch as the board dts is added
> (Vladimir Oltean)
> - Use alphabetical ordering for labels (Vladimir Oltean)
> - Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
> Oltean)
> - Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
> - Various LED fixes, utilising dt-bindings/leds/common.h and correctly
> specifying LEDs in the form "led-N" and with the color/function/
> function-enumerator properties.
> - Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
>
> The following changes were submitted as a separate series:
> - Introduce patches to disable QSPI by default and enable where used
> (Vladimir Oltean)
> - Move mdio@18032000 node from board related file to SoC (Vladimir
> Oltean)
> - In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
> the resulting usb3_phy issues
>
> Changes from v3:
> - Sort labels on mx64 a0 dts files into alphabetical order as well
> - move include directives for input/input.h and leds/common.h to
> bcm958625-mx6x-common.dtsi
> - Whitespace fixes in bcm958625-mx6x-common.dtsi
> - rename "senao_nvram" partition to "nvram"
>
> Changes from v4:
> - Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
> each .dts file (Arnd Bergmann).
> - Append [@<unit-address>] to memory nodes.
> - Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
> - Append read-only property to at24 eeprom node.
> - Remove L2 properties which should be defined at platform-level.
> - Correct NAND node names.
I applied patch 1 first such that we don't get warnings when we apply
patches from there on during bisection builds.
--
Florian