This adds support for the Radxa Zero SBC. The device-tree is loosely
based upon existing support for SEI510 and U200 (also G12A boards)
and has been developed with the 4/32 board configuration.
Changes since v1:
- Drop flash_1v8 and use vcc_1v8
- Rename dc_in to ao_5v
- Rename vcc_5v to hdmi_pw and drop GPIO control
Christian Hewitt (2):
dt-bindings: arm: amlogic: add support for Radxa Zero
arm64: dts: amlogic: add support for Radxa Zero
.../devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-g12a-radxa-zero.dts | 407 ++++++++++++++++++
3 files changed, 409 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
--
2.17.1