This is the start of the stable review cycle for the 4.19.203 release.
There are 54 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 12 Aug 2021 17:29:30 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.203-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.203-rc1
Anson Huang <[email protected]>
ARM: imx: add mmdc ipg clock operation for mmdc
Letu Ren <[email protected]>
net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
Prarit Bhargava <[email protected]>
alpha: Send stop IPI to send to online CPUs
Shreyansh Chouhan <[email protected]>
reiserfs: check directory items on read from disk
Yu Kuai <[email protected]>
reiserfs: add check for root_inode in reiserfs_fill_super
Christoph Hellwig <[email protected]>
libata: fix ata_pio_sector for CONFIG_HIGHMEM
Reinhard Speyerer <[email protected]>
qmi_wwan: add network device usage statistics for qmimux devices
Like Xu <[email protected]>
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
Dongliang Mu <[email protected]>
spi: meson-spicc: fix memory leak in meson_spicc_remove
Sean Christopherson <[email protected]>
KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
Paolo Bonzini <[email protected]>
KVM: x86: accept userspace interrupt only if no event is injected
Zheyu Ma <[email protected]>
pcmcia: i82092: fix a null pointer dereference bug
Maciej W. Rozycki <[email protected]>
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
Maciej W. Rozycki <[email protected]>
serial: 8250: Mask out floating 16/32-bit bus bits
Theodore Ts'o <[email protected]>
ext4: fix potential htree corruption when growing large_dir directories
Alex Xu (Hello71) <[email protected]>
pipe: increase minimum default pipe size to 2 pages
Johan Hovold <[email protected]>
media: rtl28xxu: fix zero-length control request
Xiangyang Zhang <[email protected]>
staging: rtl8723bs: Fix a resource leak in sd_int_dpc
Jens Wiklander <[email protected]>
tee: add tee_shm_alloc_kernel_buf()
Tyler Hicks <[email protected]>
optee: Clear stale cache entries during initialization
Steven Rostedt (VMware) <[email protected]>
tracing/histogram: Rename "cpu" to "common_cpu"
Steven Rostedt (VMware) <[email protected]>
tracing / histogram: Give calculation hist_fields a size
Hui Su <[email protected]>
scripts/tracing: fix the bug that can't parse raw_trace_func
Dmitry Osipenko <[email protected]>
usb: otg-fsm: Fix hrtimer list corruption
Maxim Devaev <[email protected]>
usb: gadget: f_hid: idle uses the highest byte for duration
Phil Elwell <[email protected]>
usb: gadget: f_hid: fixed NULL pointer dereference
Maxim Devaev <[email protected]>
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
Alexander Tsoy <[email protected]>
ALSA: usb-audio: Add registration quirk for JBL Quantum 600
Anirudh Rayabharam <[email protected]>
firmware_loader: fix use-after-free in firmware_fallback_sysfs
Anirudh Rayabharam <[email protected]>
firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback
David Bauer <[email protected]>
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
Willy Tarreau <[email protected]>
USB: serial: ch341: fix character loss at high transfer rates
Daniele Palmas <[email protected]>
USB: serial: option: add Telit FD980 composition 0x1056
Qiang.zhang <[email protected]>
USB: usbtmc: Fix RCU stall warning
Tetsuo Handa <[email protected]>
Bluetooth: defer cleanup of resources in hci_unregister_dev()
Yu Kuai <[email protected]>
blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()
Pavel Skripkin <[email protected]>
net: vxge: fix use-after-free in vxge_device_unregister
Pavel Skripkin <[email protected]>
net: fec: fix use-after-free in fec_drv_remove
Pavel Skripkin <[email protected]>
net: pegasus: fix uninit-value in get_interrupt_interval
Dan Carpenter <[email protected]>
bnx2x: fix an error code in bnx2x_nic_load()
H. Nikolaus Schaller <[email protected]>
mips: Fix non-POSIX regexp
Antoine Tenart <[email protected]>
net: ipv6: fix returned variable type in ip6_skb_dst_mtu
Fei Qin <[email protected]>
nfp: update ethtool reporting of pauseframe control
Xin Long <[email protected]>
sctp: move the active_key update after sh_keys is added
Wang Hai <[email protected]>
net: natsemi: Fix missing pci_disable_device() in probe and remove
Hans Verkuil <[email protected]>
media: videobuf2-core: dequeue if start_streaming fails
Li Manyi <[email protected]>
scsi: sr: Return correct event when media event code is 3
H. Nikolaus Schaller <[email protected]>
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
Dario Binacchi <[email protected]>
clk: stm32f4: fix post divisor setup for I2S/SAI PLLs
chihhao.chen <[email protected]>
ALSA: usb-audio: fix incorrect clock source setting
Oleksandr Suvorov <[email protected]>
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
Yang Yingliang <[email protected]>
ARM: imx: add missing iounmap()
Takashi Iwai <[email protected]>
ALSA: seq: Fix racy deletion of subscriber
Rafael J. Wysocki <[email protected]>
Revert "ACPICA: Fix memory leak caused by _CID repair function"
-------------
Diffstat:
Documentation/trace/histogram.rst | 2 +-
Makefile | 4 +-
arch/alpha/kernel/smp.c | 2 +-
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 1 +
arch/arm/boot/dts/omap5-board-common.dtsi | 9 +--
arch/arm/mach-imx/mmdc.c | 21 +++++-
arch/mips/Makefile | 2 +-
arch/mips/mti-malta/malta-platform.c | 3 +-
arch/x86/events/perf_event.h | 3 +-
arch/x86/kvm/mmu.c | 2 +-
arch/x86/kvm/x86.c | 13 +++-
block/blk-iolatency.c | 6 +-
drivers/acpi/acpica/nsrepair2.c | 7 --
drivers/ata/libata-sff.c | 35 +++++++---
drivers/base/firmware_loader/fallback.c | 14 ++--
drivers/base/firmware_loader/firmware.h | 10 ++-
drivers/base/firmware_loader/main.c | 2 +
drivers/clk/clk-stm32f4.c | 10 +--
drivers/media/common/videobuf2/videobuf2-core.c | 13 +++-
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 +++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-
drivers/net/ethernet/freescale/fec_main.c | 2 +-
drivers/net/ethernet/natsemi/natsemi.c | 8 +--
drivers/net/ethernet/neterion/vxge/vxge-main.c | 6 +-
.../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 +
drivers/net/ethernet/qlogic/qla3xxx.c | 6 +-
drivers/net/usb/pegasus.c | 14 +++-
drivers/net/usb/qmi_wwan.c | 76 ++++++++++++++++++++--
drivers/pcmcia/i82092.c | 1 +
drivers/scsi/sr.c | 2 +-
drivers/spi/spi-meson-spicc.c | 2 +
drivers/staging/rtl8723bs/hal/sdio_ops.c | 2 +
drivers/tee/optee/call.c | 36 +++++++++-
drivers/tee/optee/core.c | 9 +++
drivers/tee/optee/optee_private.h | 1 +
drivers/tee/tee_shm.c | 18 +++++
drivers/tty/serial/8250/8250_port.c | 12 +++-
drivers/usb/class/usbtmc.c | 9 +--
drivers/usb/common/usb-otg-fsm.c | 6 +-
drivers/usb/gadget/function/f_hid.c | 44 +++++++++++--
drivers/usb/serial/ch341.c | 1 +
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 3 +
drivers/usb/serial/option.c | 2 +
fs/ext4/namei.c | 2 +-
fs/pipe.c | 19 +++++-
fs/reiserfs/stree.c | 31 +++++++--
fs/reiserfs/super.c | 8 +++
include/linux/tee_drv.h | 1 +
include/linux/usb/otg-fsm.h | 1 +
include/net/bluetooth/hci_core.h | 1 +
include/net/ip6_route.h | 2 +-
kernel/trace/trace.c | 4 ++
kernel/trace/trace_events_hist.c | 25 +++++--
net/bluetooth/hci_core.c | 16 ++---
net/bluetooth/hci_sock.c | 49 +++++++++-----
net/bluetooth/hci_sysfs.c | 3 +
net/sctp/auth.c | 14 ++--
scripts/tracing/draw_functrace.py | 6 +-
sound/core/seq/seq_ports.c | 39 +++++++----
sound/usb/clock.c | 6 ++
sound/usb/quirks.c | 1 +
62 files changed, 512 insertions(+), 152 deletions(-)
From: Dario Binacchi <[email protected]>
[ Upstream commit 24b5b1978cd5a80db58e2a19db2f9c36fe8d4f7a ]
Enabling the framebuffer leads to a system hang. Running, as a debug
hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c
without taking the console_lock, allows to see the crash backtrace on
the serial line.
~ # echo 0 0 > /sys/class/graphics/fb0/pan
[ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1
[ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.733008] Hardware name: STM32 (Device Tree Support)
[ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28
[ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38
[ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b
[ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4
[ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560
[ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0
[ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8
[ 9.779911] xPSR: 0100000b
[ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.788791] Hardware name: STM32 (Device Tree Support)
[ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc)
[ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c)
The `pll_num' field in the post_div_data configuration contained a wrong
value which also referenced an uninitialized hardware clock when
clk_register_pll_div() was called.
Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs")
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Gabriel Fernandez <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-stm32f4.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 294850bdc195..61de486dec41 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -454,7 +454,7 @@ struct stm32f4_pll {
struct stm32f4_pll_post_div_data {
int idx;
- u8 pll_num;
+ int pll_idx;
const char *name;
const char *parent;
u8 flag;
@@ -485,13 +485,13 @@ static const struct clk_div_table post_divr_table[] = {
#define MAX_POST_DIV 3
static const struct stm32f4_pll_post_div_data post_div_data[MAX_POST_DIV] = {
- { CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q",
+ { CLK_I2SQ_PDIV, PLL_VCO_I2S, "plli2s-q-div", "plli2s-q",
CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},
- { CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
+ { CLK_SAIQ_PDIV, PLL_VCO_SAI, "pllsai-q-div", "pllsai-q",
CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
- { NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
+ { NO_IDX, PLL_VCO_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
};
@@ -1499,7 +1499,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
post_div->width,
post_div->flag_div,
post_div->div_table,
- clks[post_div->pll_num],
+ clks[post_div->pll_idx],
&stm32f4_clk_lock);
if (post_div->idx != NO_IDX)
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ]
Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current
code returns success.
Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index cf01e73d1bcc..2610acf9ac36 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2668,7 +2668,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
}
/* Allocated memory for FW statistics */
- if (bnx2x_alloc_fw_stats_mem(bp))
+ rc = bnx2x_alloc_fw_stats_mem(bp);
+ if (rc)
LOAD_ERROR_EXIT(bp, load_error0);
/* request pf to initialize status blocks */
--
2.30.2
From: H. Nikolaus Schaller <[email protected]>
[ Upstream commit c68ef4ad180e09805fa46965d15e1dfadf09ffa5 ]
This device tree include file describes a fixed-regulator
connecting smps7_reg output (1.8V) to some 1.8V rail and
consumers (vdds_1v8_main).
This regulator does not physically exist.
I assume it was introduced as a wrapper around smps7_reg
to provide a speaking signal name "vdds_1v8_main" as label.
This fixed-regulator without real function was not an issue
in driver code until
Commit 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")
introduced a new check for regulator initialization which
makes Palmas regulator registration fail:
[ 5.407712] ldo1: supplied by vsys_cobra
[ 5.412748] ldo2: supplied by vsys_cobra
[ 5.417603] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
The reason is that the supply-chain of regulators is too
long and goes from ldo3 through the virtual vdds_1v8_main
regulator and then back to smps7. This adds a cross-dependency
of probing Palmas regulators and the fixed-regulator which
leads to probe deferral by the new check and is no longer
resolved.
Since we do not control what device tree files including this
one reference (either &vdds_1v8_main or &smps7_reg or both)
we keep both labels for smps7 for compatibility.
Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap5-board-common.dtsi | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 61a06f6add3c..d1cb9ba080b2 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -33,14 +33,6 @@
regulator-max-microvolt = <5000000>;
};
- vdds_1v8_main: fixedregulator-vdds_1v8_main {
- compatible = "regulator-fixed";
- regulator-name = "vdds_1v8_main";
- vin-supply = <&smps7_reg>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
vmmcsd_fixed: fixedregulator-mmcsd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@@ -490,6 +482,7 @@
regulator-boot-on;
};
+ vdds_1v8_main:
smps7_reg: smps7 {
/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
regulator-name = "smps7";
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ]
Syzbot reported uninit value pegasus_probe(). The problem was in missing
error handling.
get_interrupt_interval() internally calls read_eprom_word() which can
fail in some cases. For example: failed to receive usb control message.
These cases should be handled to prevent uninit value bug, since
read_eprom_word() will not initialize passed stack variable in case of
internal failure.
Fail log:
BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x24c/0x2e0 lib/dump_stack.c:120
kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197
get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
....
Local variable ----data.i@pegasus_probe created at:
get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
Reported-and-tested-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/pegasus.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index b7a0df95d4b0..9f1777e56d7d 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -750,12 +750,16 @@ static inline void disable_net_traffic(pegasus_t *pegasus)
set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
}
-static inline void get_interrupt_interval(pegasus_t *pegasus)
+static inline int get_interrupt_interval(pegasus_t *pegasus)
{
u16 data;
u8 interval;
+ int ret;
+
+ ret = read_eprom_word(pegasus, 4, &data);
+ if (ret < 0)
+ return ret;
- read_eprom_word(pegasus, 4, &data);
interval = data >> 8;
if (pegasus->usb->speed != USB_SPEED_HIGH) {
if (interval < 0x80) {
@@ -770,6 +774,8 @@ static inline void get_interrupt_interval(pegasus_t *pegasus)
}
}
pegasus->intr_interval = interval;
+
+ return 0;
}
static void set_carrier(struct net_device *net)
@@ -1188,7 +1194,9 @@ static int pegasus_probe(struct usb_interface *intf,
| NETIF_MSG_PROBE | NETIF_MSG_LINK);
pegasus->features = usb_dev_id[dev_index].private;
- get_interrupt_interval(pegasus);
+ res = get_interrupt_interval(pegasus);
+ if (res)
+ goto out2;
if (reset_mac(pegasus)) {
dev_err(&intf->dev, "can't reset MAC\n");
res = -EIO;
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 44712965bf12ae1758cec4de53816ed4b914ca1a ]
Smatch says:
drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
Since fep pointer is netdev private data, accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Reported-by: Dan Carpenter <[email protected]>
Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Joakim Zhang <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fec_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 6b9eada1feb2..3fc823e9cdc9 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3733,13 +3733,13 @@ fec_drv_remove(struct platform_device *pdev)
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
of_node_put(fep->phy_node);
- free_netdev(ndev);
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ free_netdev(ndev);
return 0;
}
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 942e560a3d3862dd5dee1411dbdd7097d29b8416 ]
Smatch says:
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
Since vdev pointer is netdev private data accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Fixes: 6cca200362b4 ("vxge: cleanup probe error paths")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/neterion/vxge/vxge-main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 5ae3fa82909f..0766288e2f38 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -3529,13 +3529,13 @@ static void vxge_device_unregister(struct __vxge_hw_device *hldev)
kfree(vdev->vpaths);
- /* we are safe to free it now */
- free_netdev(dev);
-
vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered",
buf);
vxge_debug_entryexit(vdev->level_trace, "%s: %s:%d Exiting...", buf,
__func__, __LINE__);
+
+ /* we are safe to free it now */
+ free_netdev(dev);
}
/*
--
2.30.2
From: Yu Kuai <[email protected]>
[ Upstream commit 8d75d0eff6887bcac7225e12b9c75595e523d92d ]
If queue is dying while iolatency_set_limit() is in progress,
blk_get_queue() won't increment the refcount of the queue. However,
blk_put_queue() will still decrement the refcount later, which will
cause the refcout to be unbalanced.
Thus error out in such case to fix the problem.
Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter")
Signed-off-by: Yu Kuai <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-iolatency.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/block/blk-iolatency.c b/block/blk-iolatency.c
index 0529e94a20f7..019cf002ecee 100644
--- a/block/blk-iolatency.c
+++ b/block/blk-iolatency.c
@@ -800,7 +800,11 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf,
enable = iolatency_set_min_lat_nsec(blkg, lat_val);
if (enable) {
- WARN_ON_ONCE(!blk_get_queue(blkg->q));
+ if (!blk_get_queue(blkg->q)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
blkg_get(blkg);
}
--
2.30.2
From: Maxim Devaev <[email protected]>
commit afcff6dc690e24d636a41fd4bee6057e7c70eebd upstream.
The USB HID standard declares mandatory support for GET_IDLE and SET_IDLE
requests for Boot Keyboard. Most hosts can handle their absence, but others
like some old/strange UEFIs and BIOSes consider this a critical error
and refuse to work with f_hid.
This primitive implementation of saving and returning idle is sufficient
to meet the requirements of the standard and these devices.
Acked-by: Felipe Balbi <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Maxim Devaev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_hid.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -41,6 +41,7 @@ struct f_hidg {
unsigned char bInterfaceSubClass;
unsigned char bInterfaceProtocol;
unsigned char protocol;
+ unsigned char idle;
unsigned short report_desc_length;
char *report_desc;
unsigned short report_length;
@@ -529,6 +530,14 @@ static int hidg_setup(struct usb_functio
goto respond;
break;
+ case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+ | HID_REQ_GET_IDLE):
+ VDBG(cdev, "get_idle\n");
+ length = min_t(unsigned int, length, 1);
+ ((u8 *) req->buf)[0] = hidg->idle;
+ goto respond;
+ break;
+
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
| HID_REQ_SET_REPORT):
VDBG(cdev, "set_report | wLength=%d\n", ctrl->wLength);
@@ -552,6 +561,14 @@ static int hidg_setup(struct usb_functio
goto stall;
break;
+ case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+ | HID_REQ_SET_IDLE):
+ VDBG(cdev, "set_idle\n");
+ length = 0;
+ hidg->idle = value;
+ goto respond;
+ break;
+
case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8
| USB_REQ_GET_DESCRIPTOR):
switch (value >> 8) {
@@ -779,6 +796,7 @@ static int hidg_bind(struct usb_configur
hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
hidg->protocol = HID_REPORT_PROTOCOL;
+ hidg->idle = 1;
hidg_ss_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
hidg_ss_in_comp_desc.wBytesPerInterval =
cpu_to_le16(hidg->report_length);
From: Tetsuo Handa <[email protected]>
[ Upstream commit e04480920d1eec9c061841399aa6f35b6f987d8b ]
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].
It seems that history of this locking problem is a trial and error.
Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.
Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.
Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().
Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.
This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).
But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.
Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.
Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag. There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.
Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_core.c | 16 +++++------
net/bluetooth/hci_sock.c | 49 +++++++++++++++++++++-----------
net/bluetooth/hci_sysfs.c | 3 ++
4 files changed, 45 insertions(+), 24 deletions(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 6a61faf0cc79..75d892dc7796 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1042,6 +1042,7 @@ struct hci_dev *hci_alloc_dev(void);
void hci_free_dev(struct hci_dev *hdev);
int hci_register_dev(struct hci_dev *hdev);
void hci_unregister_dev(struct hci_dev *hdev);
+void hci_cleanup_dev(struct hci_dev *hdev);
int hci_suspend_dev(struct hci_dev *hdev);
int hci_resume_dev(struct hci_dev *hdev);
int hci_reset_dev(struct hci_dev *hdev);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 219cdbb476fb..7a85f215da45 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3261,14 +3261,10 @@ EXPORT_SYMBOL(hci_register_dev);
/* Unregister HCI device */
void hci_unregister_dev(struct hci_dev *hdev)
{
- int id;
-
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
hci_dev_set_flag(hdev, HCI_UNREGISTER);
- id = hdev->id;
-
write_lock(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock(&hci_dev_list_lock);
@@ -3297,7 +3293,14 @@ void hci_unregister_dev(struct hci_dev *hdev)
}
device_del(&hdev->dev);
+ /* Actual cleanup is deferred until hci_cleanup_dev(). */
+ hci_dev_put(hdev);
+}
+EXPORT_SYMBOL(hci_unregister_dev);
+/* Cleanup HCI device */
+void hci_cleanup_dev(struct hci_dev *hdev)
+{
debugfs_remove_recursive(hdev->debugfs);
kfree_const(hdev->hw_info);
kfree_const(hdev->fw_info);
@@ -3320,11 +3323,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
hci_discovery_filter_clear(hdev);
hci_dev_unlock(hdev);
- hci_dev_put(hdev);
-
- ida_simple_remove(&hci_index_ida, id);
+ ida_simple_remove(&hci_index_ida, hdev->id);
}
-EXPORT_SYMBOL(hci_unregister_dev);
/* Suspend HCI device */
int hci_suspend_dev(struct hci_dev *hdev)
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 06156de24c50..3ba0c6df73ce 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -59,6 +59,17 @@ struct hci_pinfo {
char comm[TASK_COMM_LEN];
};
+static struct hci_dev *hci_hdev_from_sock(struct sock *sk)
+{
+ struct hci_dev *hdev = hci_pi(sk)->hdev;
+
+ if (!hdev)
+ return ERR_PTR(-EBADFD);
+ if (hci_dev_test_flag(hdev, HCI_UNREGISTER))
+ return ERR_PTR(-EPIPE);
+ return hdev;
+}
+
void hci_sock_set_flag(struct sock *sk, int nr)
{
set_bit(nr, &hci_pi(sk)->flags);
@@ -752,19 +763,13 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event)
if (event == HCI_DEV_UNREG) {
struct sock *sk;
- /* Detach sockets from device */
+ /* Wake up sockets using this dead device */
read_lock(&hci_sk_list.lock);
sk_for_each(sk, &hci_sk_list.head) {
- lock_sock(sk);
if (hci_pi(sk)->hdev == hdev) {
- hci_pi(sk)->hdev = NULL;
sk->sk_err = EPIPE;
- sk->sk_state = BT_OPEN;
sk->sk_state_change(sk);
-
- hci_dev_put(hdev);
}
- release_sock(sk);
}
read_unlock(&hci_sk_list.lock);
}
@@ -923,10 +928,10 @@ static int hci_sock_blacklist_del(struct hci_dev *hdev, void __user *arg)
static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd,
unsigned long arg)
{
- struct hci_dev *hdev = hci_pi(sk)->hdev;
+ struct hci_dev *hdev = hci_hdev_from_sock(sk);
- if (!hdev)
- return -EBADFD;
+ if (IS_ERR(hdev))
+ return PTR_ERR(hdev);
if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
return -EBUSY;
@@ -1080,6 +1085,18 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr,
lock_sock(sk);
+ /* Allow detaching from dead device and attaching to alive device, if
+ * the caller wants to re-bind (instead of close) this socket in
+ * response to hci_sock_dev_event(HCI_DEV_UNREG) notification.
+ */
+ hdev = hci_pi(sk)->hdev;
+ if (hdev && hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
+ hci_pi(sk)->hdev = NULL;
+ sk->sk_state = BT_OPEN;
+ hci_dev_put(hdev);
+ }
+ hdev = NULL;
+
if (sk->sk_state == BT_BOUND) {
err = -EALREADY;
goto done;
@@ -1356,9 +1373,9 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr,
lock_sock(sk);
- hdev = hci_pi(sk)->hdev;
- if (!hdev) {
- err = -EBADFD;
+ hdev = hci_hdev_from_sock(sk);
+ if (IS_ERR(hdev)) {
+ err = PTR_ERR(hdev);
goto done;
}
@@ -1718,9 +1735,9 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg,
goto done;
}
- hdev = hci_pi(sk)->hdev;
- if (!hdev) {
- err = -EBADFD;
+ hdev = hci_hdev_from_sock(sk);
+ if (IS_ERR(hdev)) {
+ err = PTR_ERR(hdev);
goto done;
}
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 9874844a95a9..b69d88b88d2e 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -83,6 +83,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn)
static void bt_host_release(struct device *dev)
{
struct hci_dev *hdev = to_hci_dev(dev);
+
+ if (hci_dev_test_flag(hdev, HCI_UNREGISTER))
+ hci_cleanup_dev(hdev);
kfree(hdev);
module_put(THIS_MODULE);
}
--
2.30.2
From: Daniele Palmas <[email protected]>
commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream.
Add the following Telit FD980 composition 0x1056:
Cfg #1: mass storage
Cfg #2: rndis, tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1203,6 +1203,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1055, 0xff), /* Telit FN980 (PCIe) */
.driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */
+ .driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
From: David Bauer <[email protected]>
commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream.
The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the
USB connection.
Signed-off-by: David Bauer <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 3 +++
2 files changed, 4 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -209,6 +209,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_AUTO_M3_OP_COM_V2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -159,6 +159,9 @@
/* Vardaan Enterprises Serial Interface VEUSB422R3 */
#define FTDI_VARDAAN_PID 0xF070
+/* Auto-M3 Ltd. - OP-COM USB V2 - OBD interface Adapter */
+#define FTDI_AUTO_M3_OP_COM_V2_PID 0x4f50
+
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
From: Willy Tarreau <[email protected]>
commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream.
The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.
The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.
I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ch341.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -625,6 +625,7 @@ static struct usb_serial_driver ch341_de
.owner = THIS_MODULE,
.name = "ch341-uart",
},
+ .bulk_in_size = 512,
.id_table = id_table,
.num_ports = 1,
.open = ch341_open,
From: Anirudh Rayabharam <[email protected]>
commit 0d6434e10b5377a006f6dd995c8fc5e2d82acddc upstream.
The only motivation for using -EAGAIN in commit 0542ad88fbdd81bb
("firmware loader: Fix _request_firmware_load() return val for fw load
abort") was to distinguish the error from -ENOMEM, and so there is no
real reason in keeping it. -EAGAIN is typically used to tell the
userspace to try something again and in this case re-using the sysfs
loading interface cannot be retried when a timeout happens, so the
return value is also bogus.
-ETIMEDOUT is received when the wait times out and returning that
is much more telling of what the reason for the failure was. So, just
propagate that instead of returning -EAGAIN.
Suggested-by: Luis Chamberlain <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/firmware_loader/fallback.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/base/firmware_loader/fallback.c
+++ b/drivers/base/firmware_loader/fallback.c
@@ -581,8 +581,6 @@ static int fw_load_sysfs_fallback(struct
if (fw_state_is_aborted(fw_priv)) {
if (retval == -ERESTARTSYS)
retval = -EINTR;
- else
- retval = -EAGAIN;
} else if (fw_priv->is_paged_buf && !fw_priv->data)
retval = -ENOMEM;
From: Anirudh Rayabharam <[email protected]>
commit 75d95e2e39b27f733f21e6668af1c9893a97de5e upstream.
This use-after-free happens when a fw_priv object has been freed but
hasn't been removed from the pending list (pending_fw_head). The next
time fw_load_sysfs_fallback tries to insert into the list, it ends up
accessing the pending_list member of the previously freed fw_priv.
The root cause here is that all code paths that abort the fw load
don't delete it from the pending list. For example:
_request_firmware()
-> fw_abort_batch_reqs()
-> fw_state_aborted()
To fix this, delete the fw_priv from the list in __fw_set_state() if
the new state is DONE or ABORTED. This way, all aborts will remove
the fw_priv from the list. Accordingly, remove calls to list_del_init
that were being made before calling fw_state_(aborted|done).
Also, in fw_load_sysfs_fallback, don't add the fw_priv to the pending
list if it is already aborted. Instead, just jump out and return early.
Fixes: bcfbd3523f3c ("firmware: fix a double abort case with fw_load_sysfs_fallback")
Cc: stable <[email protected]>
Reported-by: [email protected]
Tested-by: [email protected]
Reviewed-by: Shuah Khan <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/firmware_loader/fallback.c | 12 ++++++++----
drivers/base/firmware_loader/firmware.h | 10 +++++++++-
drivers/base/firmware_loader/main.c | 2 ++
3 files changed, 19 insertions(+), 5 deletions(-)
--- a/drivers/base/firmware_loader/fallback.c
+++ b/drivers/base/firmware_loader/fallback.c
@@ -86,12 +86,11 @@ static void __fw_load_abort(struct fw_pr
{
/*
* There is a small window in which user can write to 'loading'
- * between loading done and disappearance of 'loading'
+ * between loading done/aborted and disappearance of 'loading'
*/
- if (fw_sysfs_done(fw_priv))
+ if (fw_state_is_aborted(fw_priv) || fw_sysfs_done(fw_priv))
return;
- list_del_init(&fw_priv->pending_list);
fw_state_aborted(fw_priv);
}
@@ -297,7 +296,6 @@ static ssize_t firmware_loading_store(st
* Same logic as fw_load_abort, only the DONE bit
* is ignored and we set ABORT only on failure.
*/
- list_del_init(&fw_priv->pending_list);
if (rc) {
fw_state_aborted(fw_priv);
written = rc;
@@ -559,6 +557,11 @@ static int fw_load_sysfs_fallback(struct
}
mutex_lock(&fw_lock);
+ if (fw_state_is_aborted(fw_priv)) {
+ mutex_unlock(&fw_lock);
+ retval = -EINTR;
+ goto out;
+ }
list_add(&fw_priv->pending_list, &pending_fw_head);
mutex_unlock(&fw_lock);
@@ -584,6 +587,7 @@ static int fw_load_sysfs_fallback(struct
} else if (fw_priv->is_paged_buf && !fw_priv->data)
retval = -ENOMEM;
+out:
device_del(f_dev);
err_put_dev:
put_device(f_dev);
--- a/drivers/base/firmware_loader/firmware.h
+++ b/drivers/base/firmware_loader/firmware.h
@@ -106,8 +106,16 @@ static inline void __fw_state_set(struct
WRITE_ONCE(fw_st->status, status);
- if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED)
+ if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED) {
+#ifdef CONFIG_FW_LOADER_USER_HELPER
+ /*
+ * Doing this here ensures that the fw_priv is deleted from
+ * the pending list in all abort/done paths.
+ */
+ list_del_init(&fw_priv->pending_list);
+#endif
complete_all(&fw_st->completion);
+ }
}
static inline void fw_state_aborted(struct fw_priv *fw_priv)
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -558,8 +558,10 @@ static void fw_abort_batch_reqs(struct f
return;
fw_priv = fw->priv;
+ mutex_lock(&fw_lock);
if (!fw_state_is_aborted(fw_priv))
fw_state_aborted(fw_priv);
+ mutex_unlock(&fw_lock);
}
/* called from request_firmware() and request_firmware_work_func() */
From: Alexander Tsoy <[email protected]>
commit 4b0556b96e1fe7723629bd40e3813a30cd632faf upstream.
Apparently JBL Quantum 600 has multiple hardware revisions. Apply
registration quirk to another device id as well.
Signed-off-by: Alexander Tsoy <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1555,6 +1555,7 @@ static const struct registration_quirk r
REG_QUIRK_ENTRY(0x0951, 0x16ea, 2), /* Kingston HyperX Cloud Flight S */
REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2), /* JBL Quantum 600 */
REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2), /* JBL Quantum 400 */
+ REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2), /* JBL Quantum 600 */
REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2), /* JBL Quantum 800 */
{ 0 } /* terminator */
};
From: Phil Elwell <[email protected]>
commit 2867652e4766360adf14dfda3832455e04964f2a upstream.
Disconnecting and reconnecting the USB cable can lead to crashes
and a variety of kernel log spam.
The problem was found and reproduced on the Raspberry Pi [1]
and the original fix was created in Raspberry's own fork [2].
Link: https://github.com/raspberrypi/linux/issues/3870 [1]
Link: https://github.com/raspberrypi/linux/commit/a6e47d5f4efbd2ea6a0b6565cd2f9b7bb217ded5 [2]
Signed-off-by: Maxim Devaev <[email protected]>
Signed-off-by: Phil Elwell <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_hid.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -345,6 +345,11 @@ static ssize_t f_hidg_write(struct file
spin_lock_irqsave(&hidg->write_spinlock, flags);
+ if (!hidg->req) {
+ spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+ return -ESHUTDOWN;
+ }
+
#define WRITE_COND (!hidg->write_pending)
try_again:
/* write queue */
@@ -365,8 +370,14 @@ try_again:
count = min_t(unsigned, count, hidg->report_length);
spin_unlock_irqrestore(&hidg->write_spinlock, flags);
- status = copy_from_user(req->buf, buffer, count);
+ if (!req) {
+ ERROR(hidg->func.config->cdev, "hidg->req is NULL\n");
+ status = -ESHUTDOWN;
+ goto release_write_pending;
+ }
+
+ status = copy_from_user(req->buf, buffer, count);
if (status != 0) {
ERROR(hidg->func.config->cdev,
"copy_from_user error\n");
@@ -394,14 +405,17 @@ try_again:
spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+ if (!hidg->in_ep->enabled) {
+ ERROR(hidg->func.config->cdev, "in_ep is disabled\n");
+ status = -ESHUTDOWN;
+ goto release_write_pending;
+ }
+
status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC);
- if (status < 0) {
- ERROR(hidg->func.config->cdev,
- "usb_ep_queue error on int endpoint %zd\n", status);
+ if (status < 0)
goto release_write_pending;
- } else {
+ else
status = count;
- }
return status;
release_write_pending:
From: Dmitry Osipenko <[email protected]>
commit bf88fef0b6f1488abeca594d377991171c00e52a upstream.
The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.
Unable to handle kernel NULL pointer dereference at virtual address 00000126)
...
PC is at __run_timers.part.0+0x150/0x228
LR is at __next_timer_interrupt+0x51/0x9c
...
(__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50)
(run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0)
(__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8)
(irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60)
(handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c)
(gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac)
Cc: [email protected]
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/common/usb-otg-fsm.c | 6 +++++-
include/linux/usb/otg-fsm.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -193,7 +193,11 @@ static void otg_start_hnp_polling(struct
if (!fsm->host_req_flag)
return;
- INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+ if (!fsm->hnp_work_inited) {
+ INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+ fsm->hnp_work_inited = true;
+ }
+
schedule_delayed_work(&fsm->hnp_polling_work,
msecs_to_jiffies(T_HOST_REQ_POLL));
}
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -196,6 +196,7 @@ struct otg_fsm {
struct mutex lock;
u8 *host_req_flag;
struct delayed_work hnp_polling_work;
+ bool hnp_work_inited;
bool state_changed;
};
From: Maxim Devaev <[email protected]>
commit fa20bada3f934e3b3e4af4c77e5b518cd5a282e5 upstream.
SET_IDLE value must be shifted 8 bits to the right to get duration.
This confirmed by USBCV test.
Fixes: afcff6dc690e ("usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers")
Cc: stable <[email protected]>
Signed-off-by: Maxim Devaev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_hid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -579,7 +579,7 @@ static int hidg_setup(struct usb_functio
| HID_REQ_SET_IDLE):
VDBG(cdev, "set_idle\n");
length = 0;
- hidg->idle = value;
+ hidg->idle = value >> 8;
goto respond;
break;
From: Steven Rostedt (VMware) <[email protected]>
commit 1e3bac71c5053c99d438771fc9fa5082ae5d90aa upstream.
Currently the histogram logic allows the user to write "cpu" in as an
event field, and it will record the CPU that the event happened on.
The problem with this is that there's a lot of events that have "cpu"
as a real field, and using "cpu" as the CPU it ran on, makes it
impossible to run histograms on the "cpu" field of events.
For example, if I want to have a histogram on the count of the
workqueue_queue_work event on its cpu field, running:
># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger
Gives a misleading and wrong result.
Change the command to "common_cpu" as no event should have "common_*"
fields as that's a reserved name for fields used by all events. And
this makes sense here as common_cpu would be a field used by all events.
Now we can even do:
># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger
># cat events/workqueue/workqueue_queue_work/hist
# event histogram
#
# trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active]
#
{ common_cpu: 0, cpu: 2 } hitcount: 1
{ common_cpu: 0, cpu: 4 } hitcount: 1
{ common_cpu: 7, cpu: 7 } hitcount: 1
{ common_cpu: 0, cpu: 7 } hitcount: 1
{ common_cpu: 0, cpu: 1 } hitcount: 1
{ common_cpu: 0, cpu: 6 } hitcount: 2
{ common_cpu: 0, cpu: 5 } hitcount: 2
{ common_cpu: 1, cpu: 1 } hitcount: 4
{ common_cpu: 6, cpu: 6 } hitcount: 4
{ common_cpu: 5, cpu: 5 } hitcount: 14
{ common_cpu: 4, cpu: 4 } hitcount: 26
{ common_cpu: 0, cpu: 0 } hitcount: 39
{ common_cpu: 2, cpu: 2 } hitcount: 184
Now for backward compatibility, I added a trick. If "cpu" is used, and
the field is not found, it will fall back to "common_cpu" and work as
it did before. This way, it will still work for old programs that use
"cpu" to get the actual CPU, but if the event has a "cpu" as a field, it
will get that event's "cpu" field, which is probably what it wants
anyway.
I updated the tracefs/README to include documentation about both the
common_timestamp and the common_cpu. This way, if that text is present in
the README, then an application can know that common_cpu is supported over
just plain "cpu".
Link: https://lkml.kernel.org/r/[email protected]
Cc: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: [email protected]
Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers")
Reviewed-by: Tom Zanussi <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/trace/histogram.rst | 2 +-
kernel/trace/trace.c | 4 ++++
kernel/trace/trace_events_hist.c | 21 +++++++++++++++------
3 files changed, 20 insertions(+), 7 deletions(-)
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
with the event, in nanoseconds. May be
modified by .usecs to have timestamps
interpreted as microseconds.
- cpu int the cpu on which the event occurred.
+ common_cpu int the cpu on which the event occurred.
====================== ==== =======================================
Extended error information
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4727,6 +4727,10 @@ static const char readme_msg[] =
"\t [:pause][:continue][:clear]\n"
"\t [:name=histname1]\n"
"\t [if <filter>]\n\n"
+ "\t Note, special fields can be used as well:\n"
+ "\t common_timestamp - to record current timestamp\n"
+ "\t common_cpu - to record the CPU the event happened on\n"
+ "\n"
"\t When a matching event is hit, an entry is added to a hash\n"
"\t table using the key(s) and value(s) named, and the value of a\n"
"\t sum called 'hitcount' is incremented. Keys and values\n"
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -1773,7 +1773,7 @@ static const char *hist_field_name(struc
field->flags & HIST_FIELD_FL_ALIAS)
field_name = hist_field_name(field->operands[0], ++level);
else if (field->flags & HIST_FIELD_FL_CPU)
- field_name = "cpu";
+ field_name = "common_cpu";
else if (field->flags & HIST_FIELD_FL_EXPR ||
field->flags & HIST_FIELD_FL_VAR_REF) {
if (field->system) {
@@ -2627,14 +2627,23 @@ parse_field(struct hist_trigger_data *hi
hist_data->enable_timestamps = true;
if (*flags & HIST_FIELD_FL_TIMESTAMP_USECS)
hist_data->attrs->ts_in_usecs = true;
- } else if (strcmp(field_name, "cpu") == 0)
+ } else if (strcmp(field_name, "common_cpu") == 0)
*flags |= HIST_FIELD_FL_CPU;
else {
field = trace_find_event_field(file->event_call, field_name);
if (!field || !field->size) {
- hist_err("Couldn't find field: ", field_name);
- field = ERR_PTR(-EINVAL);
- goto out;
+ /*
+ * For backward compatibility, if field_name
+ * was "cpu", then we treat this the same as
+ * common_cpu.
+ */
+ if (strcmp(field_name, "cpu") == 0) {
+ *flags |= HIST_FIELD_FL_CPU;
+ } else {
+ hist_err("Couldn't find field: ", field_name);
+ field = ERR_PTR(-EINVAL);
+ goto out;
+ }
}
}
out:
@@ -5052,7 +5061,7 @@ static void hist_field_print(struct seq_
seq_printf(m, "%s=", hist_field->var.name);
if (hist_field->flags & HIST_FIELD_FL_CPU)
- seq_puts(m, "cpu");
+ seq_puts(m, "common_cpu");
else if (field_name) {
if (hist_field->flags & HIST_FIELD_FL_VAR_REF ||
hist_field->flags & HIST_FIELD_FL_ALIAS)
From: Li Manyi <[email protected]>
[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ]
Media event code 3 is defined in the MMC-6 spec as follows:
"MediaRemoval: The media has been removed from the specified slot, and
the Drive is unable to access the media without user intervention. This
applies to media changers only."
This indicated that treating the condition as an EJECT_REQUEST was
appropriate. However, doing so had the unfortunate side-effect of causing
the drive tray to be physically ejected on resume. Instead treat the event
as a MEDIA_CHANGE request.
Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Li Manyi <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index acf0c244141f..84dd776d36c3 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -217,7 +217,7 @@ static unsigned int sr_get_events(struct scsi_device *sdev)
else if (med->media_event_code == 2)
return DISK_EVENT_MEDIA_CHANGE;
else if (med->media_event_code == 3)
- return DISK_EVENT_EJECT_REQUEST;
+ return DISK_EVENT_MEDIA_CHANGE;
return 0;
}
--
2.30.2
From: Letu Ren <[email protected]>
[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ]
When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver
has already acquired the spin lock, so the driver should not call 'ssleep'
in atomic context.
This bug can be fixed by using 'mdelay' instead of 'ssleep'.
Reported-by: Letu Ren <[email protected]>
Signed-off-by: Letu Ren <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 2d71646640ac..f98e2f417c2e 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -155,7 +155,7 @@ static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev)
"driver lock acquired\n");
return 1;
}
- ssleep(1);
+ mdelay(1000);
} while (++i < 10);
netdev_err(qdev->ndev, "Timed out waiting for driver lock...\n");
@@ -3292,7 +3292,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
if ((value & ISP_CONTROL_SR) == 0)
break;
- ssleep(1);
+ mdelay(1000);
} while ((--max_wait_time));
/*
@@ -3328,7 +3328,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
ispControlStatus);
if ((value & ISP_CONTROL_FSR) == 0)
break;
- ssleep(1);
+ mdelay(1000);
} while ((--max_wait_time));
}
if (max_wait_time == 0)
--
2.30.2
From: Alex Xu (Hello71) <[email protected]>
commit 46c4c9d1beb7f5b4cec4dd90e7728720583ee348 upstream.
This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:
int main()
{
int pipefd[2];
for (int i = 0; i < 1025; i++)
if (pipe(pipefd) == -1)
return 1;
size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
printf("%zd\n", bufsz);
char *buf = calloc(bufsz, 1);
write(pipefd[1], buf, bufsz);
read(pipefd[0], buf, bufsz-1);
write(pipefd[1], buf, 1);
}
Note that you may need to increase your RLIMIT_NOFILE before running the
program.
Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <[email protected]>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/pipe.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -30,6 +30,21 @@
#include "internal.h"
/*
+ * New pipe buffers will be restricted to this size while the user is exceeding
+ * their pipe buffer quota. The general pipe use case needs at least two
+ * buffers: one for data yet to be read, and one for new data. If this is less
+ * than two, then a write to a non-empty pipe may block even if the pipe is not
+ * full. This can occur with GNU make jobserver or similar uses of pipes as
+ * semaphores: multiple processes may be waiting to write tokens back to the
+ * pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/.
+ *
+ * Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their
+ * own risk, namely: pipe writes to non-full pipes may block until the pipe is
+ * emptied.
+ */
+#define PIPE_MIN_DEF_BUFFERS 2
+
+/*
* The max size that a non-root user is allowed to grow the pipe. Can
* be set by root in /proc/sys/fs/pipe-max-size
*/
@@ -654,8 +669,8 @@ struct pipe_inode_info *alloc_pipe_info(
user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
if (too_many_pipe_buffers_soft(user_bufs) && is_unprivileged_user()) {
- user_bufs = account_pipe_buffers(user, pipe_bufs, 1);
- pipe_bufs = 1;
+ user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS);
+ pipe_bufs = PIPE_MIN_DEF_BUFFERS;
}
if (too_many_pipe_buffers_hard(user_bufs) && is_unprivileged_user())
From: Theodore Ts'o <[email protected]>
commit 877ba3f729fd3d8ef0e29bc2a55e57cfa54b2e43 upstream.
Commit b5776e7524af ("ext4: fix potential htree index checksum
corruption) removed a required restart when multiple levels of index
nodes need to be split. Fix this to avoid directory htree corruptions
when using the large_dir feature.
Cc: [email protected] # v5.11
Cc: Благодаренко Артём <[email protected]>
Fixes: b5776e7524af ("ext4: fix potential htree index checksum corruption)
Reported-by: Denis <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2317,7 +2317,7 @@ again:
goto journal_error;
err = ext4_handle_dirty_dx_node(handle, dir,
frame->bh);
- if (err)
+ if (restart || err)
goto journal_error;
} else {
struct dx_root *dxroot;
From: Xiangyang Zhang <[email protected]>
commit 990e4ad3ddcb72216caeddd6e62c5f45a21e8121 upstream.
The "c2h_evt" variable is not freed when function call
"c2h_evt_read_88xx" failed
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Xiangyang Zhang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8723bs/hal/sdio_ops.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/staging/rtl8723bs/hal/sdio_ops.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_ops.c
@@ -1077,6 +1077,8 @@ void sd_int_dpc(struct adapter *adapter)
} else {
rtw_c2h_wk_cmd(adapter, (u8 *)c2h_evt);
}
+ } else {
+ kfree(c2h_evt);
}
} else {
/* Error handling for malloc fail */
From: Hans Verkuil <[email protected]>
[ Upstream commit c592b46907adbeb81243f7eb7a468c36692658b8 ]
If a vb2_queue sets q->min_buffers_needed then when the number of
queued buffers reaches q->min_buffers_needed, vb2_core_qbuf() will call
the start_streaming() callback. If start_streaming() returns an error,
then that error was just returned by vb2_core_qbuf(), but the buffer
was still queued. However, userspace expects that if VIDIOC_QBUF fails,
the buffer is returned dequeued.
So if start_streaming() fails, then remove the buffer from the queue,
thus avoiding this unwanted side-effect.
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Tested-by: Kieran Bingham <[email protected]>
Fixes: b3379c6201bb ("[media] vb2: only call start_streaming if sufficient buffers are queued")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/videobuf2/videobuf2-core.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index 93d250db0b6f..50015a2ea5ce 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -1391,6 +1391,7 @@ static int vb2_start_streaming(struct vb2_queue *q)
int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
{
struct vb2_buffer *vb;
+ enum vb2_buffer_state orig_state;
int ret;
if (q->error) {
@@ -1420,6 +1421,7 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
* Add to the queued buffers list, a buffer will stay on it until
* dequeued in dqbuf.
*/
+ orig_state = vb->state;
list_add_tail(&vb->queued_entry, &q->queued_list);
q->queued_count++;
q->waiting_for_buffers = false;
@@ -1450,8 +1452,17 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
if (q->streaming && !q->start_streaming_called &&
q->queued_count >= q->min_buffers_needed) {
ret = vb2_start_streaming(q);
- if (ret)
+ if (ret) {
+ /*
+ * Since vb2_core_qbuf will return with an error,
+ * we should return it to state DEQUEUED since
+ * the error indicates that the buffer wasn't queued.
+ */
+ list_del(&vb->queued_entry);
+ q->queued_count--;
+ vb->state = orig_state;
return ret;
+ }
}
dprintk(2, "qbuf of buffer %d succeeded\n", vb->index);
--
2.30.2
From: Tyler Hicks <[email protected]>
commit b5c10dd04b7418793517e3286cde5c04759a86de upstream.
The shm cache could contain invalid addresses if
optee_disable_shm_cache() was not called from the .shutdown hook of the
previous kernel before a kexec. These addresses could be unmapped or
they could point to mapped but unintended locations in memory.
Clear the shared memory cache, while being careful to not translate the
addresses returned from OPTEE_SMC_DISABLE_SHM_CACHE, during driver
initialization. Once all pre-cache shm objects are removed, proceed with
enabling the cache so that we know that we can handle cached shm objects
with confidence later in the .shutdown hook.
Cc: [email protected]
Signed-off-by: Tyler Hicks <[email protected]>
Reviewed-by: Jens Wiklander <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tee/optee/call.c | 36 +++++++++++++++++++++++++++++++++---
drivers/tee/optee/core.c | 9 +++++++++
drivers/tee/optee/optee_private.h | 1 +
3 files changed, 43 insertions(+), 3 deletions(-)
--- a/drivers/tee/optee/call.c
+++ b/drivers/tee/optee/call.c
@@ -413,11 +413,13 @@ void optee_enable_shm_cache(struct optee
}
/**
- * optee_disable_shm_cache() - Disables caching of some shared memory allocation
- * in OP-TEE
+ * __optee_disable_shm_cache() - Disables caching of some shared memory
+ * allocation in OP-TEE
* @optee: main service struct
+ * @is_mapped: true if the cached shared memory addresses were mapped by this
+ * kernel, are safe to dereference, and should be freed
*/
-void optee_disable_shm_cache(struct optee *optee)
+static void __optee_disable_shm_cache(struct optee *optee, bool is_mapped)
{
struct optee_call_waiter w;
@@ -436,6 +438,13 @@ void optee_disable_shm_cache(struct opte
if (res.result.status == OPTEE_SMC_RETURN_OK) {
struct tee_shm *shm;
+ /*
+ * Shared memory references that were not mapped by
+ * this kernel must be ignored to prevent a crash.
+ */
+ if (!is_mapped)
+ continue;
+
shm = reg_pair_to_ptr(res.result.shm_upper32,
res.result.shm_lower32);
tee_shm_free(shm);
@@ -446,6 +455,27 @@ void optee_disable_shm_cache(struct opte
optee_cq_wait_final(&optee->call_queue, &w);
}
+/**
+ * optee_disable_shm_cache() - Disables caching of mapped shared memory
+ * allocations in OP-TEE
+ * @optee: main service struct
+ */
+void optee_disable_shm_cache(struct optee *optee)
+{
+ return __optee_disable_shm_cache(optee, true);
+}
+
+/**
+ * optee_disable_unmapped_shm_cache() - Disables caching of shared memory
+ * allocations in OP-TEE which are not
+ * currently mapped
+ * @optee: main service struct
+ */
+void optee_disable_unmapped_shm_cache(struct optee *optee)
+{
+ return __optee_disable_shm_cache(optee, false);
+}
+
#define PAGELIST_ENTRIES_PER_PAGE \
((OPTEE_MSG_NONCONTIG_PAGE_SIZE / sizeof(u64)) - 1)
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -619,6 +619,15 @@ static struct optee *optee_probe(struct
optee->memremaped_shm = memremaped_shm;
optee->pool = pool;
+ /*
+ * Ensure that there are no pre-existing shm objects before enabling
+ * the shm cache so that there's no chance of receiving an invalid
+ * address during shutdown. This could occur, for example, if we're
+ * kexec booting from an older kernel that did not properly cleanup the
+ * shm cache.
+ */
+ optee_disable_unmapped_shm_cache(optee);
+
optee_enable_shm_cache(optee);
pr_info("initialized driver\n");
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -160,6 +160,7 @@ int optee_cancel_req(struct tee_context
void optee_enable_shm_cache(struct optee *optee);
void optee_disable_shm_cache(struct optee *optee);
+void optee_disable_unmapped_shm_cache(struct optee *optee);
int optee_shm_register(struct tee_context *ctx, struct tee_shm *shm,
struct page **pages, size_t num_pages,
From: Fei Qin <[email protected]>
[ Upstream commit 9fdc5d85a8fe684cdf24dc31c6bc4a727decfe87 ]
Pauseframe control is set to symmetric mode by default on the NFP.
Pause frames can not be configured through ethtool now, but ethtool can
report the supported mode.
Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()")
Signed-off-by: Fei Qin <[email protected]>
Signed-off-by: Louis Peens <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
index 9043d2cadd5d..2e75d0af4a58 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -292,6 +292,8 @@ nfp_net_get_link_ksettings(struct net_device *netdev,
/* Init to unknowns */
ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+ ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
+ ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause);
cmd->base.port = PORT_OTHER;
cmd->base.speed = SPEED_UNKNOWN;
cmd->base.duplex = DUPLEX_UNKNOWN;
--
2.30.2
From: Antoine Tenart <[email protected]>
[ Upstream commit 4039146777a91e1576da2bf38e0d8a1061a1ae47 ]
The patch fixing the returned value of ip6_skb_dst_mtu (int -> unsigned
int) was rebased between its initial review and the version applied. In
the meantime fade56410c22 was applied, which added a new variable (int)
used as the returned value. This lead to a mismatch between the function
prototype and the variable used as the return value.
Fixes: 40fc3054b458 ("net: ipv6: fix return value of ip6_skb_dst_mtu")
Cc: Vadim Fedorenko <[email protected]>
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/ip6_route.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index a8f5410ae0d4..f237573a2651 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -243,7 +243,7 @@ int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
static inline unsigned int ip6_skb_dst_mtu(struct sk_buff *skb)
{
- int mtu;
+ unsigned int mtu;
struct ipv6_pinfo *np = skb->sk && !dev_recursion_level() ?
inet6_sk(skb->sk) : NULL;
--
2.30.2
From: Xin Long <[email protected]>
[ Upstream commit ae954bbc451d267f7d60d7b49db811d5a68ebd7b ]
In commit 58acd1009226 ("sctp: update active_key for asoc when old key is
being replaced"), sctp_auth_asoc_init_active_key() is called to update
the active_key right after the old key is deleted and before the new key
is added, and it caused that the active_key could be found with the key_id.
In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was
triggered:
[ ] kernel BUG at net/sctp/auth.c:416!
[ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp]
[ ] Call Trace:
[ ] sctp_auth_set_key+0x16d/0x1b0 [sctp]
[ ] sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp]
[ ] __sys_setsockopt+0xd6/0x1d0
[ ] __x64_sys_setsockopt+0x20/0x30
[ ] do_syscall_64+0x5b/0x1a0
So fix it by moving the active_key update after sh_keys is added.
Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: Ying Xu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/auth.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index b2ca66c4a21d..9e0c98df20da 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -880,14 +880,18 @@ int sctp_auth_set_key(struct sctp_endpoint *ep,
memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylength);
cur_key->key = key;
- if (replace) {
- list_del_init(&shkey->key_list);
- sctp_auth_shkey_release(shkey);
- if (asoc && asoc->active_key_id == auth_key->sca_keynumber)
- sctp_auth_asoc_init_active_key(asoc, GFP_KERNEL);
+ if (!replace) {
+ list_add(&cur_key->key_list, sh_keys);
+ return 0;
}
+
+ list_del_init(&shkey->key_list);
+ sctp_auth_shkey_release(shkey);
list_add(&cur_key->key_list, sh_keys);
+ if (asoc && asoc->active_key_id == auth_key->sca_keynumber)
+ sctp_auth_asoc_init_active_key(asoc, GFP_KERNEL);
+
return 0;
}
--
2.30.2
From: Maciej W. Rozycki <[email protected]>
commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream.
Correct big-endian accesses to the CBUS UART, a Malta on-board discrete
TI16C550C part wired directly to the system controller's device bus, and
do not use byte swapping with the 32-bit accesses to the device.
The CBUS is used for devices such as the boot flash memory needed early
on in system bootstrap even before PCI has been initialised. Therefore
it uses the system controller's device bus, which follows the endianness
set with the CPU, which means no byte-swapping is ever required for data
accesses to CBUS, unlike with PCI.
The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and
`writel' MMIO accessors, which on the MIPS platform imply byte-swapping
with PCI systems. Consequently the wrong byte lane is accessed with the
big-endian configuration and the UART is not correctly accessed.
As it happens the UPIO_MEM32BE access method makes use of the `ioread32'
and `iowrite32' MMIO accessors, which still use `readl' and `writel'
respectively, however they byte-swap data passed, effectively cancelling
swapping done with the accessors themselves and making it suitable for
the CBUS UART.
Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then,
based on the endianness selected. With this change in place the device
is correctly recognised with big-endian Malta at boot, along with the
Super I/O devices behind PCI:
Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart8250] disabled
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A
Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence")
Cc: [email protected] # v2.6.23+
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/mti-malta/malta-platform.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -47,7 +47,8 @@ static struct plat_serial8250_port uart8
.mapbase = 0x1f000900, /* The CBUS UART */
.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
.uartclk = 3686400, /* Twice the usual clk! */
- .iotype = UPIO_MEM32,
+ .iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+ UPIO_MEM32BE : UPIO_MEM32,
.flags = CBUS_UART_FLAGS,
.regshift = 3,
},
From: H. Nikolaus Schaller <[email protected]>
[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ]
When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like
SYNC include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
UPD include/config/kernel.release
HOSTCC scripts/dtc/dtc.o - due to target missing
It turns out that egrep uses this egrep pattern:
(|MINOR_|PATCHLEVEL_)
This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html
It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.
Such patterns can be replaced by a transformation like
"(|p1|p2)" -> "(p1|p2)?"
Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 63e2ad43bd6a..8f4e169cde11 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -325,7 +325,7 @@ KBUILD_LDFLAGS += -m $(ld-emul)
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
- egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
+ egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
endif
--
2.30.2
From: Shreyansh Chouhan <[email protected]>
[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ]
While verifying the leaf item that we read from the disk, reiserfs
doesn't check the directory items, this could cause a crash when we
read a directory item from the disk that has an invalid deh_location.
This patch adds a check to the directory items read from the disk that
does a bounds check on deh_location for the directory entries. Any
directory entry header with a directory entry offset greater than the
item length is considered invalid.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: [email protected]
Signed-off-by: Shreyansh Chouhan <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/reiserfs/stree.c | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index 5229038852ca..4ebad6781b0e 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -387,6 +387,24 @@ void pathrelse(struct treepath *search_path)
search_path->path_length = ILLEGAL_PATH_ELEMENT_OFFSET;
}
+static int has_valid_deh_location(struct buffer_head *bh, struct item_head *ih)
+{
+ struct reiserfs_de_head *deh;
+ int i;
+
+ deh = B_I_DEH(bh, ih);
+ for (i = 0; i < ih_entry_count(ih); i++) {
+ if (deh_location(&deh[i]) > ih_item_len(ih)) {
+ reiserfs_warning(NULL, "reiserfs-5094",
+ "directory entry location seems wrong %h",
+ &deh[i]);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
{
struct block_head *blkh;
@@ -454,11 +472,14 @@ static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
"(second one): %h", ih);
return 0;
}
- if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
- reiserfs_warning(NULL, "reiserfs-5093",
- "item entry count seems wrong %h",
- ih);
- return 0;
+ if (is_direntry_le_ih(ih)) {
+ if (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE)) {
+ reiserfs_warning(NULL, "reiserfs-5093",
+ "item entry count seems wrong %h",
+ ih);
+ return 0;
+ }
+ return has_valid_deh_location(bh, ih);
}
prev_location = ih_location(ih);
}
--
2.30.2
From: Hui Su <[email protected]>
commit 1c0cec64a7cc545eb49f374a43e9f7190a14defa upstream.
Since commit 77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info
to default trace output"), the default trace output format has been changed to:
<idle>-0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt
<idle>-0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains
<idle>-0 [011] d.h. 22420.068695: account_process_tick <-update_process_times
origin trace output format:(before v3.2.0)
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func,
So we need modify draw_functrace.py to adapt the new version trace output format.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output
Signed-off-by: Hui Su <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/tracing/draw_functrace.py | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -17,7 +17,7 @@ Usage:
$ cat /sys/kernel/debug/tracing/trace_pipe > ~/raw_trace_func
Wait some times but not too much, the script is a bit slow.
Break the pipe (Ctrl + Z)
- $ scripts/draw_functrace.py < raw_trace_func > draw_functrace
+ $ scripts/tracing/draw_functrace.py < ~/raw_trace_func > draw_functrace
Then you have your drawn trace in draw_functrace
"""
@@ -103,10 +103,10 @@ def parseLine(line):
line = line.strip()
if line.startswith("#"):
raise CommentLineException
- m = re.match("[^]]+?\\] +([0-9.]+): (\\w+) <-(\\w+)", line)
+ m = re.match("[^]]+?\\] +([a-z.]+) +([0-9.]+): (\\w+) <-(\\w+)", line)
if m is None:
raise BrokenLineException
- return (m.group(1), m.group(2), m.group(3))
+ return (m.group(2), m.group(3), m.group(4))
def main():
From: Steven Rostedt (VMware) <[email protected]>
commit 2c05caa7ba8803209769b9e4fe02c38d77ae88d0 upstream.
When working on my user space applications, I found a bug in the synthetic
event code where the automated synthetic event field was not matching the
event field calculation it was attached to. Looking deeper into it, it was
because the calculation hist_field was not given a size.
The synthetic event fields are matched to their hist_fields either by
having the field have an identical string type, or if that does not match,
then the size and signed values are used to match the fields.
The problem arose when I tried to match a calculation where the fields
were "unsigned int". My tool created a synthetic event of type "u32". But
it failed to match. The string was:
diff=field1-field2:onmatch(event).trace(synth,$diff)
Adding debugging into the kernel, I found that the size of "diff" was 0.
And since it was given "unsigned int" as a type, the histogram fallback
code used size and signed. The signed matched, but the size of u32 (4) did
not match zero, and the event failed to be created.
This can be worse if the field you want to match is not one of the
acceptable fields for a synthetic event. As event fields can have any type
that is supported in Linux, this can cause an issue. For example, if a
type is an enum. Then there's no way to use that with any calculations.
Have the calculation field simply take on the size of what it is
calculating.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Tom Zanussi <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: [email protected]
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events_hist.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -2911,6 +2911,10 @@ static struct hist_field *parse_expr(str
expr->operands[0] = operand1;
expr->operands[1] = operand2;
+
+ /* The operand sizes should be the same, so just pick one */
+ expr->size = operand1->size;
+
expr->operator = field_op;
expr->name = expr_str(expr, 0);
expr->type = kstrdup(operand1->type, GFP_KERNEL);
From: Wang Hai <[email protected]>
[ Upstream commit 7fe74dfd41c428afb24e2e615470832fa997ff14 ]
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/natsemi/natsemi.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
index b9a1a9f999ea..039d5dd98dfe 100644
--- a/drivers/net/ethernet/natsemi/natsemi.c
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -819,7 +819,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
printk(version);
#endif
- i = pci_enable_device(pdev);
+ i = pcim_enable_device(pdev);
if (i) return i;
/* natsemi has a non-standard PM control register
@@ -852,7 +852,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
ioaddr = ioremap(iostart, iosize);
if (!ioaddr) {
i = -ENOMEM;
- goto err_ioremap;
+ goto err_pci_request_regions;
}
/* Work around the dropped serial bit. */
@@ -974,9 +974,6 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
err_register_netdev:
iounmap(ioaddr);
- err_ioremap:
- pci_release_regions(pdev);
-
err_pci_request_regions:
free_netdev(dev);
return i;
@@ -3242,7 +3239,6 @@ static void natsemi_remove1(struct pci_dev *pdev)
NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
unregister_netdev (dev);
- pci_release_regions (pdev);
iounmap(ioaddr);
free_netdev (dev);
}
--
2.30.2
From: chihhao.chen <[email protected]>
[ Upstream commit 4511781f95da0a3b2bad34f3f5e3967e80cd2d18 ]
The following scenario describes an echo test for
Samsung USBC Headset (AKG) with VID/PID (0x04e8/0xa051).
We first start a capture stream(USB IN transfer) in 96Khz/24bit/1ch mode.
In clock find source function, we get value 0x2 for clock selector
and 0x1 for clock source.
Kernel-4.14 behavior
Since clock source is valid so clock selector was not set again.
We pass through this function and start a playback stream(USB OUT transfer)
in 48Khz/32bit/2ch mode. This time we get value 0x1 for clock selector
and 0x1 for clock source. Finally clock id with this setting is 0x9.
Kernel-5.10 behavior
Clock selector was always set one more time even it is valid.
When we start a playback stream, we will get 0x2 for clock selector
and 0x1 for clock source. In this case clock id becomes 0xA.
This is an incorrect clock source setting and results in severe noises.
We see wrong data rate in USB IN transfer.
(From 288 bytes/ms becomes 144 bytes/ms) It should keep in 288 bytes/ms.
This earphone works fine on older kernel version load because
this is a newly-added behavior.
Fixes: d2e8f641257d ("ALSA: usb-audio: Explicitly set up the clock selector")
Signed-off-by: chihhao.chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/clock.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 863ac42076e5..d1455fb2c6fc 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -296,6 +296,12 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
selector->baCSourceID[ret - 1],
visited, validate);
if (ret > 0) {
+ /*
+ * For Samsung USBC Headset (AKG), setting clock selector again
+ * will result in incorrect default clock setting problems
+ */
+ if (chip->usb_id == USB_ID(0x04e8, 0xa051))
+ return ret;
err = uac_clock_selector_set_val(chip, entity_id, cur);
if (err < 0)
return err;
--
2.30.2
From: Christoph Hellwig <[email protected]>
[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ]
Data transfers are not required to be block aligned in memory, so they
span two pages. Fix this by splitting the call to >sff_data_xfer into
two for that case.
This has been broken since the initial libata import before the damn
of git, but was uncovered by the legacy ide driver removal.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/libata-sff.c | 35 +++++++++++++++++++++++++++--------
1 file changed, 27 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 7484ffdabd54..ec62d26c32a9 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -657,6 +657,20 @@ unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf,
}
EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
+static void ata_pio_xfer(struct ata_queued_cmd *qc, struct page *page,
+ unsigned int offset, size_t xfer_size)
+{
+ bool do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ unsigned char *buf;
+
+ buf = kmap_atomic(page);
+ qc->ap->ops->sff_data_xfer(qc, buf + offset, xfer_size, do_write);
+ kunmap_atomic(buf);
+
+ if (!do_write && !PageSlab(page))
+ flush_dcache_page(page);
+}
+
/**
* ata_pio_sector - Transfer a sector of data.
* @qc: Command on going
@@ -668,11 +682,9 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
*/
static void ata_pio_sector(struct ata_queued_cmd *qc)
{
- int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
struct ata_port *ap = qc->ap;
struct page *page;
unsigned int offset;
- unsigned char *buf;
if (!qc->cursg) {
qc->curbytes = qc->nbytes;
@@ -690,13 +702,20 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
- /* do the actual data transfer */
- buf = kmap_atomic(page);
- ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write);
- kunmap_atomic(buf);
+ /*
+ * Split the transfer when it splits a page boundary. Note that the
+ * split still has to be dword aligned like all ATA data transfers.
+ */
+ WARN_ON_ONCE(offset % 4);
+ if (offset + qc->sect_size > PAGE_SIZE) {
+ unsigned int split_len = PAGE_SIZE - offset;
- if (!do_write && !PageSlab(page))
- flush_dcache_page(page);
+ ata_pio_xfer(qc, page, offset, split_len);
+ ata_pio_xfer(qc, nth_page(page, 1), 0,
+ qc->sect_size - split_len);
+ } else {
+ ata_pio_xfer(qc, page, offset, qc->sect_size);
+ }
qc->curbytes += qc->sect_size;
qc->cursg_ofs += qc->sect_size;
--
2.30.2
From: Reinhard Speyerer <[email protected]>
commit 44f82312fe9113bab6642f4d0eab6b1b7902b6e1 upstream.
Add proper network device usage statistics for qmimux devices
instead of reporting all-zero values for them.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <[email protected]>
Signed-off-by: Reinhard Speyerer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 76 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 71 insertions(+), 5 deletions(-)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -22,6 +22,7 @@
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc-wdm.h>
+#include <linux/u64_stats_sync.h>
/* This driver supports wwan (3G/LTE/?) devices using a vendor
* specific management protocol called Qualcomm MSM Interface (QMI) -
@@ -74,6 +75,7 @@ struct qmimux_hdr {
struct qmimux_priv {
struct net_device *real_dev;
u8 mux_id;
+ struct pcpu_sw_netstats __percpu *stats64;
};
static int qmimux_open(struct net_device *dev)
@@ -100,19 +102,65 @@ static netdev_tx_t qmimux_start_xmit(str
struct qmimux_priv *priv = netdev_priv(dev);
unsigned int len = skb->len;
struct qmimux_hdr *hdr;
+ netdev_tx_t ret;
hdr = skb_push(skb, sizeof(struct qmimux_hdr));
hdr->pad = 0;
hdr->mux_id = priv->mux_id;
hdr->pkt_len = cpu_to_be16(len);
skb->dev = priv->real_dev;
- return dev_queue_xmit(skb);
+ ret = dev_queue_xmit(skb);
+
+ if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
+ struct pcpu_sw_netstats *stats64 = this_cpu_ptr(priv->stats64);
+
+ u64_stats_update_begin(&stats64->syncp);
+ stats64->tx_packets++;
+ stats64->tx_bytes += len;
+ u64_stats_update_end(&stats64->syncp);
+ } else {
+ dev->stats.tx_dropped++;
+ }
+
+ return ret;
+}
+
+static void qmimux_get_stats64(struct net_device *net,
+ struct rtnl_link_stats64 *stats)
+{
+ struct qmimux_priv *priv = netdev_priv(net);
+ unsigned int start;
+ int cpu;
+
+ netdev_stats_to_stats64(stats, &net->stats);
+
+ for_each_possible_cpu(cpu) {
+ struct pcpu_sw_netstats *stats64;
+ u64 rx_packets, rx_bytes;
+ u64 tx_packets, tx_bytes;
+
+ stats64 = per_cpu_ptr(priv->stats64, cpu);
+
+ do {
+ start = u64_stats_fetch_begin_irq(&stats64->syncp);
+ rx_packets = stats64->rx_packets;
+ rx_bytes = stats64->rx_bytes;
+ tx_packets = stats64->tx_packets;
+ tx_bytes = stats64->tx_bytes;
+ } while (u64_stats_fetch_retry_irq(&stats64->syncp, start));
+
+ stats->rx_packets += rx_packets;
+ stats->rx_bytes += rx_bytes;
+ stats->tx_packets += tx_packets;
+ stats->tx_bytes += tx_bytes;
+ }
}
static const struct net_device_ops qmimux_netdev_ops = {
- .ndo_open = qmimux_open,
- .ndo_stop = qmimux_stop,
- .ndo_start_xmit = qmimux_start_xmit,
+ .ndo_open = qmimux_open,
+ .ndo_stop = qmimux_stop,
+ .ndo_start_xmit = qmimux_start_xmit,
+ .ndo_get_stats64 = qmimux_get_stats64,
};
static void qmimux_setup(struct net_device *dev)
@@ -197,8 +245,19 @@ static int qmimux_rx_fixup(struct usbnet
}
skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len);
- if (netif_rx(skbn) != NET_RX_SUCCESS)
+ if (netif_rx(skbn) != NET_RX_SUCCESS) {
+ net->stats.rx_errors++;
return 0;
+ } else {
+ struct pcpu_sw_netstats *stats64;
+ struct qmimux_priv *priv = netdev_priv(net);
+
+ stats64 = this_cpu_ptr(priv->stats64);
+ u64_stats_update_begin(&stats64->syncp);
+ stats64->rx_packets++;
+ stats64->rx_bytes += pkt_len;
+ u64_stats_update_end(&stats64->syncp);
+ }
skip:
offset += len + qmimux_hdr_sz;
@@ -222,6 +281,12 @@ static int qmimux_register_device(struct
priv->mux_id = mux_id;
priv->real_dev = real_dev;
+ priv->stats64 = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
+ if (!priv->stats64) {
+ err = -ENOBUFS;
+ goto out_free_newdev;
+ }
+
err = register_netdevice(new_dev);
if (err < 0)
goto out_free_newdev;
@@ -252,6 +317,7 @@ static void qmimux_unregister_device(str
struct qmimux_priv *priv = netdev_priv(dev);
struct net_device *real_dev = priv->real_dev;
+ free_percpu(priv->stats64);
netdev_upper_dev_unlink(real_dev, dev);
unregister_netdevice_queue(dev, head);
From: Maciej W. Rozycki <[email protected]>
commit e5227c51090e165db4b48dcaa300605bfced7014 upstream.
Make sure only actual 8 bits of the IIR register are used in determining
the port type in `autoconfig'.
The `serial_in' port accessor returns the `unsigned int' type, meaning
that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types
more than 8 bits of data are returned, of which the high order bits will
often come from bus lines that are left floating in the data phase. For
example with the MIPS Malta board's CBUS UART, where the registers are
aligned on 8-byte boundaries and which uses 32-bit accesses, data as
follows is returned:
YAMON> dump -32 0xbf000900 0x40
BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........
BF000910: 1F000901 1F000901 1F000900 1F000900 ................
BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...`
BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................
YAMON>
Evidently high-order 24 bits return values previously driven in the
address phase (the 3 highest order address bits used with the command
above are masked out in the simple virtual address mapping used here and
come out at zeros on the external bus), a common scenario with bus lines
left floating, due to bus capacitance.
Consequently when the value of IIR, mapped at 0x1f000910, is retrieved
in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted
by 6 and then assigned to 8-bit `scratch' variable, the value calculated
is 0x27, not one of 0, 1, 2, 3 expected in port type determination.
Fix the issue then, by assigning the value returned from `serial_in' to
`scratch' first, which masks out 24 high-order bits retrieved, and only
then right-shift the resulting 8-bit data quantity, producing the value
of 3 in this case, as expected. Fix the same issue in `serial_dl_read'.
The problem first appeared with Linux 2.6.9-rc3 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in
`serial_in' was updated with this case:
+ case UPIO_MEM32:
+ return readl(up->port.membase + offset);
+
which made it produce results outside the unsigned 8-bit range for the
first time, though obviously it is system dependent what actual values
appear in the high order bits retrieved and it may well have been zeros
in the relevant positions with the system the change originally was
intended for. It is at that point that code in `autoconf' should have
been updated accordingly, but clearly it was overlooked.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected] # v2.6.12+
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_port.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -313,7 +313,11 @@ static const struct serial8250_config ua
/* Uart divisor latch read */
static int default_serial_dl_read(struct uart_8250_port *up)
{
- return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+ /* Assign these in pieces to truncate any bits above 7. */
+ unsigned char dll = serial_in(up, UART_DLL);
+ unsigned char dlm = serial_in(up, UART_DLM);
+
+ return dll | dlm << 8;
}
/* Uart divisor latch write */
@@ -1301,9 +1305,11 @@ static void autoconfig(struct uart_8250_
serial_out(up, UART_LCR, 0);
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- scratch = serial_in(up, UART_IIR) >> 6;
- switch (scratch) {
+ /* Assign this as it is to truncate any bits above 7. */
+ scratch = serial_in(up, UART_IIR);
+
+ switch (scratch >> 6) {
case 0:
autoconfig_8250(up);
break;
From: Jens Wiklander <[email protected]>
commit dc7019b7d0e188d4093b34bd0747ed0d668c63bf upstream.
Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory
from a kernel driver. This function can later be made more lightweight
by unnecessary dma-buf export.
Cc: [email protected]
Reviewed-by: Tyler Hicks <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tee/tee_shm.c | 18 ++++++++++++++++++
include/linux/tee_drv.h | 1 +
2 files changed, 19 insertions(+)
--- a/drivers/tee/tee_shm.c
+++ b/drivers/tee/tee_shm.c
@@ -228,6 +228,24 @@ struct tee_shm *tee_shm_priv_alloc(struc
}
EXPORT_SYMBOL_GPL(tee_shm_priv_alloc);
+/**
+ * tee_shm_alloc_kernel_buf() - Allocate shared memory for kernel buffer
+ * @ctx: Context that allocates the shared memory
+ * @size: Requested size of shared memory
+ *
+ * The returned memory registered in secure world and is suitable to be
+ * passed as a memory buffer in parameter argument to
+ * tee_client_invoke_func(). The memory allocated is later freed with a
+ * call to tee_shm_free().
+ *
+ * @returns a pointer to 'struct tee_shm'
+ */
+struct tee_shm *tee_shm_alloc_kernel_buf(struct tee_context *ctx, size_t size)
+{
+ return tee_shm_alloc(ctx, size, TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+}
+EXPORT_SYMBOL_GPL(tee_shm_alloc_kernel_buf);
+
struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr,
size_t length, u32 flags)
{
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -317,6 +317,7 @@ void *tee_get_drvdata(struct tee_device
* @returns a pointer to 'struct tee_shm'
*/
struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags);
+struct tee_shm *tee_shm_alloc_kernel_buf(struct tee_context *ctx, size_t size);
/**
* tee_shm_priv_alloc() - Allocate shared memory privately
From: Johan Hovold <[email protected]>
commit 76f22c93b209c811bd489950f17f8839adb31901 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
The driver uses a zero-length i2c-read request for type detection so
update the control-request code to use usb_sndctrlpipe() in this case.
Note that actually trying to read the i2c register in question does not
work as the register might not exist (e.g. depending on the demodulator)
as reported by Eero Lehtinen <[email protected]>.
Reported-by: [email protected]
Reported-by: Eero Lehtinen <[email protected]>
Tested-by: Eero Lehtinen <[email protected]>
Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc: [email protected] # 4.0
Cc: Antti Palosaari <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -50,7 +50,16 @@ static int rtl28xxu_ctrl_msg(struct dvb_
} else {
/* read */
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
- pipe = usb_rcvctrlpipe(d->udev, 0);
+
+ /*
+ * Zero-length transfers must use usb_sndctrlpipe() and
+ * rtl28xxu_identify_state() uses a zero-length i2c read
+ * command to determine the chip type.
+ */
+ if (req->size)
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ else
+ pipe = usb_sndctrlpipe(d->udev, 0);
}
ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
From: Dongliang Mu <[email protected]>
commit 8311ee2164c5cd1b63a601ea366f540eae89f10e upstream.
In meson_spicc_probe, the error handling code needs to clean up master
by calling spi_master_put, but the remove function does not have this
function call. This will lead to memory leak of spicc->master.
Reported-by: Dongliang Mu <[email protected]>
Fixes: 454fa271bc4e("spi: Add Meson SPICC driver")
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-meson-spicc.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -599,6 +599,8 @@ static int meson_spicc_remove(struct pla
clk_disable_unprepare(spicc->core);
+ spi_master_put(spicc->master);
+
return 0;
}
From: Anson Huang <[email protected]>
[ Upstream commit 9454a0caff6ac6d2a5ea17dd624dc13387bbfcd3 ]
i.MX6 SoCs have MMDC ipg clock for registers access, to make
sure MMDC registers access successfully, add optional clock
enable for MMDC driver.
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-imx/mmdc.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index 1d340fda5e4f..ae0a61c61a6e 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -11,6 +11,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
#include <linux/hrtimer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -547,7 +548,20 @@ static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
void __iomem *mmdc_base, *reg;
+ struct clk *mmdc_ipg_clk;
u32 val;
+ int err;
+
+ /* the ipg clock is optional */
+ mmdc_ipg_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mmdc_ipg_clk))
+ mmdc_ipg_clk = NULL;
+
+ err = clk_prepare_enable(mmdc_ipg_clk);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to enable mmdc ipg clock.\n");
+ return err;
+ }
mmdc_base = of_iomap(np, 0);
WARN_ON(!mmdc_base);
--
2.30.2
From: Zheyu Ma <[email protected]>
commit e39cdacf2f664b09029e7c1eb354c91a20c367af upstream.
During the driver loading process, the 'dev' field was not assigned, but
the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map'
function.
Signed-off-by: Zheyu Ma <[email protected]>
CC: <[email protected]>
[[email protected]: shorten commit message, add Cc to stable]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pcmcia/i82092.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -105,6 +105,7 @@ static int i82092aa_pci_probe(struct pci
for (i = 0;i<socket_count;i++) {
sockets[i].card_state = 1; /* 1 = present but empty */
sockets[i].io_base = pci_resource_start(dev, 0);
+ sockets[i].dev = dev;
sockets[i].socket.features |= SS_CAP_PCCARD;
sockets[i].socket.map_size = 0x1000;
sockets[i].socket.irq_mask = 0;
From: Paolo Bonzini <[email protected]>
commit fa7a549d321a4189677b0cea86e58d9db7977f7b upstream.
Once an exception has been injected, any side effects related to
the exception (such as setting CR2 or DR6) have been taked place.
Therefore, once KVM sets the VM-entry interruption information
field or the AMD EVENTINJ field, the next VM-entry must deliver that
exception.
Pending interrupts are processed after injected exceptions, so
in theory it would not be a problem to use KVM_INTERRUPT when
an injected exception is present. However, DOSEMU is using
run->ready_for_interrupt_injection to detect interrupt windows
and then using KVM_SET_SREGS/KVM_SET_REGS to inject the
interrupt manually. For this to work, the interrupt window
must be delayed after the completion of the previous event
injection.
Cc: [email protected]
Reported-by: Stas Sergeev <[email protected]>
Tested-by: Stas Sergeev <[email protected]>
Fixes: 71cc849b7093 ("KVM: x86: Fix split-irqchip vs interrupt injection window request")
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3366,8 +3366,17 @@ static int kvm_cpu_accept_dm_intr(struct
static int kvm_vcpu_ready_for_interrupt_injection(struct kvm_vcpu *vcpu)
{
- return kvm_arch_interrupt_allowed(vcpu) &&
- kvm_cpu_accept_dm_intr(vcpu);
+ /*
+ * Do not cause an interrupt window exit if an exception
+ * is pending or an event needs reinjection; userspace
+ * might want to inject the interrupt manually using KVM_SET_REGS
+ * or KVM_SET_SREGS. For that to work, we must be at an
+ * instruction boundary and with no events half-injected.
+ */
+ return (kvm_arch_interrupt_allowed(vcpu) &&
+ kvm_cpu_accept_dm_intr(vcpu) &&
+ !kvm_event_needs_reinjection(vcpu) &&
+ !vcpu->arch.exception.pending);
}
static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
From: Like Xu <[email protected]>
commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream.
If we use "perf record" in an AMD Milan guest, dmesg reports a #GP
warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx:
[] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20)
[] Call Trace:
[] amd_pmu_disable_event+0x22/0x90
[] x86_pmu_stop+0x4c/0xa0
[] x86_pmu_del+0x3a/0x140
The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host,
while the guest perf driver should avoid such use.
Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled")
Signed-off-by: Like Xu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Tested-by: Kim Phillips <[email protected]>
Tested-by: Liam Merwick <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/perf_event.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -799,9 +799,10 @@ void x86_pmu_stop(struct perf_event *eve
static inline void x86_pmu_disable_event(struct perf_event *event)
{
+ u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
struct hw_perf_event *hwc = &event->hw;
- wrmsrl(hwc->config_base, hwc->config);
+ wrmsrl(hwc->config_base, hwc->config & ~disable_mask);
}
void x86_pmu_enable_event(struct perf_event *event);
From: Sean Christopherson <[email protected]>
commit d5aaad6f83420efb8357ac8e11c868708b22d0a9 upstream.
Take a signed 'long' instead of an 'unsigned long' for the number of
pages to add/subtract to the total number of pages used by the MMU. This
fixes a zero-extension bug on 32-bit kernels that effectively corrupts
the per-cpu counter used by the shrinker.
Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit
kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus
an unsigned 32-bit value on 32-bit kernels. As a result, the value used
to adjust the per-cpu counter is zero-extended (unsigned -> signed), not
sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to
4294967295 and effectively corrupts the counter.
This was found by a staggering amount of sheer dumb luck when running
kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick
in while running tests and do_shrink_slab() logged an error about trying
to free a negative number of objects. The truly lucky part is that the
kernel just happened to be a slightly stale build, as the shrinker no
longer yells about negative objects as of commit 18bb473e5031 ("mm:
vmscan: shrink deferred objects proportional to priority").
vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460
Fixes: bc8a3d8925a8 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation")
Cc: [email protected]
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2042,7 +2042,7 @@ static int is_empty_shadow_page(u64 *spt
* aggregate version in order to make the slab shrinker
* faster
*/
-static inline void kvm_mod_used_mmu_pages(struct kvm *kvm, unsigned long nr)
+static inline void kvm_mod_used_mmu_pages(struct kvm *kvm, long nr)
{
kvm->arch.n_used_mmu_pages += nr;
percpu_counter_add(&kvm_total_used_mmu_pages, nr);
From: Yu Kuai <[email protected]>
[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ]
Our syzcaller report a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0
Oops: 0010 [#1] SMP KASAN
CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888114e779b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa
RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0
RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001
R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00
R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0
FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__lookup_slow+0x116/0x2d0
? page_put_link+0x120/0x120
? __d_lookup+0xfc/0x320
? d_lookup+0x49/0x90
lookup_one_len+0x13c/0x170
? __lookup_slow+0x2d0/0x2d0
? reiserfs_schedule_old_flush+0x31/0x130
reiserfs_lookup_privroot+0x64/0x150
reiserfs_fill_super+0x158c/0x1b90
? finish_unfinished+0xb10/0xb10
? bprintf+0xe0/0xe0
? __mutex_lock_slowpath+0x30/0x30
? __kasan_check_write+0x20/0x30
? up_write+0x51/0xb0
? set_blocksize+0x9f/0x1f0
mount_bdev+0x27c/0x2d0
? finish_unfinished+0xb10/0xb10
? reiserfs_kill_sb+0x120/0x120
get_super_block+0x19/0x30
legacy_get_tree+0x76/0xf0
vfs_get_tree+0x49/0x160
? capable+0x1d/0x30
path_mount+0xacc/0x1380
? putname+0x97/0xd0
? finish_automount+0x450/0x450
? kmem_cache_free+0xf8/0x5a0
? putname+0x97/0xd0
do_mount+0xe2/0x110
? path_mount+0x1380/0x1380
? copy_mount_options+0x69/0x140
__x64_sys_mount+0xf0/0x190
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is because 'root_inode' is initialized with wrong mode, and
it's i_op is set to 'reiserfs_special_inode_operations'. Thus add
check for 'root_inode' to fix the problem.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yu Kuai <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/reiserfs/super.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index ec5716dd58c2..831a542c22c6 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2085,6 +2085,14 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
unlock_new_inode(root_inode);
}
+ if (!S_ISDIR(root_inode->i_mode) || !inode_get_bytes(root_inode) ||
+ !root_inode->i_size) {
+ SWARN(silent, s, "", "corrupt root inode, run fsck");
+ iput(root_inode);
+ errval = -EUCLEAN;
+ goto error;
+ }
+
s->s_root = d_make_root(root_inode);
if (!s->s_root)
goto error;
--
2.30.2
From: Prarit Bhargava <[email protected]>
[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ]
This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly. A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.
On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.
Send the stop IPI to only the online CPUs.
[1] https://lkml.org/lkml/2020/1/10/250
Signed-off-by: Prarit Bhargava <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/alpha/kernel/smp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index d0dccae53ba9..8a89b9adb4fe 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -585,7 +585,7 @@ void
smp_send_stop(void)
{
cpumask_t to_whom;
- cpumask_copy(&to_whom, cpu_possible_mask);
+ cpumask_copy(&to_whom, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &to_whom);
#ifdef DEBUG_IPI_MSG
if (hard_smp_processor_id() != boot_cpu_id)
--
2.30.2
On 2021/8/11 1:29, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.203 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 12 Aug 2021 17:29:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.203-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 4.19.203-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.203-rc1
Commit: f9d1a17ebeccc490534fe19202f7315bab3f0b7f
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8859
passed: 8859
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8859
passed: 8859
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
Hi!
> commit dc7019b7d0e188d4093b34bd0747ed0d668c63bf upstream.
>
> Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory
> from a kernel driver. This function can later be made more lightweight
> by unnecessary dma-buf export.
5.10 contains follow-up patches actually using the export, but 4.19
does not. I believe it should be dropped from 4.19.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi Greg,
On Tue, Aug 10, 2021 at 07:29:54PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.203 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 12 Aug 2021 17:29:30 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.1.1 20210723): 63 configs -> no failure
arm (gcc version 11.1.1 20210723): 116 configs -> no new failure
arm64 (gcc version 11.1.1 20210723): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/18
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On 2021-08-11 09:24:34, Pavel Machek wrote:
> Hi!
>
> > commit dc7019b7d0e188d4093b34bd0747ed0d668c63bf upstream.
> >
> > Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory
> > from a kernel driver. This function can later be made more lightweight
> > by unnecessary dma-buf export.
>
> 5.10 contains follow-up patches actually using the export, but 4.19
> does not. I believe it should be dropped from 4.19.
That's correct. Those follow-up patches that made use of this function
were only needed back to 5.4.
Tyler
>
> Best regards,
> Pavel
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, 10 Aug 2021 at 23:01, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.203 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 12 Aug 2021 17:29:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.203-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.19.203-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: 752ef2004f4b5225de4a6c8e3275d84e3ccdcba8
* git describe: v4.19.202-55-g752ef2004f4b
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.202-55-g752ef2004f4b
## No regressions (compared to v4.19.202-48-g491a60cb51d4)
## No fixes (compared to v4.19.202-48-g491a60cb51d4)
## Test result summary
total: 76731, pass: 59259, fail: 1882, skip: 13252, xfail: 2338
## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 39 total, 39 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* timesync-off
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On 8/10/21 10:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.203 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 12 Aug 2021 17:29:30 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 439 pass: 439 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 8/10/21 11:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.203 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 12 Aug 2021 17:29:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.203-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Wed, Aug 11, 2021 at 08:34:27AM -0500, Tyler Hicks wrote:
> On 2021-08-11 09:24:34, Pavel Machek wrote:
> > Hi!
> >
> > > commit dc7019b7d0e188d4093b34bd0747ed0d668c63bf upstream.
> > >
> > > Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory
> > > from a kernel driver. This function can later be made more lightweight
> > > by unnecessary dma-buf export.
> >
> > 5.10 contains follow-up patches actually using the export, but 4.19
> > does not. I believe it should be dropped from 4.19.
>
> That's correct. Those follow-up patches that made use of this function
> were only needed back to 5.4.
Now dropped, thanks.
greg k-h
Hi!
> This is the start of the stable review cycle for the 4.19.203 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any kernel problems here: (but we have some
problems with testing infrastructure).
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP) <[email protected]>
I noticed that 4.4.281-rc1 was tagged, and our bots are working on it,
too, but I don't see corresponding announcement.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany