Add support for SFP cages connected to the Marvell 88E1512 transceiver.
88E1512 supports for SGMII/1000Base-X/100Base-FX media type with RGMII
on system interface. Configure PHY to appropriate mode depending on the
type of SFP inserted. On SFP removal configure PHY to the RGMII-copper
mode so RJ-45 port can still work.
Signed-off-by: Ivan Bornyakov <[email protected]>
---
drivers/net/phy/marvell.c | 105 +++++++++++++++++++++++++++++++++++++-
1 file changed, 104 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3de93c9f2744..ce0a7de1e08f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -32,6 +32,7 @@
#include <linux/marvell_phy.h>
#include <linux/bitfield.h>
#include <linux/of.h>
+#include <linux/sfp.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -46,6 +47,7 @@
#define MII_MARVELL_MISC_TEST_PAGE 0x06
#define MII_MARVELL_VCT7_PAGE 0x07
#define MII_MARVELL_WOL_PAGE 0x11
+#define MII_MARVELL_MODE_PAGE 0x12
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
@@ -176,7 +178,14 @@
#define MII_88E1510_GEN_CTRL_REG_1 0x14
#define MII_88E1510_GEN_CTRL_REG_1_MODE_MASK 0x7
+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII 0x0 /* RGMII to copper */
#define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */
+/* RGMII to 1000BASE-X */
+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X 0x2
+/* RGMII to 100BASE-FX */
+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX 0x3
+/* RGMII to SGMII */
+#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII 0x4
#define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */
#define MII_VCT5_TX_RX_MDI0_COUPLING 0x10
@@ -2701,6 +2710,100 @@ static int marvell_probe(struct phy_device *phydev)
return marvell_hwmon_probe(phydev);
}
+static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+ struct phy_device *phydev = upstream;
+ phy_interface_t interface;
+ struct device *dev;
+ int oldpage;
+ int ret = 0;
+ u16 mode;
+
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+
+ dev = &phydev->mdio.dev;
+
+ sfp_parse_support(phydev->sfp_bus, id, supported);
+ interface = sfp_select_interface(phydev->sfp_bus, supported);
+
+ dev_info(dev, "%s SFP module inserted\n", phy_modes(interface));
+
+ switch (interface) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X;
+
+ break;
+ case PHY_INTERFACE_MODE_100BASEX:
+ mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX;
+
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII;
+
+ break;
+ default:
+ dev_err(dev, "Incompatible SFP module inserted\n");
+
+ return -EINVAL;
+ }
+
+ oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE);
+ if (oldpage < 0)
+ goto error;
+
+ ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
+ MII_88E1510_GEN_CTRL_REG_1_MODE_MASK, mode);
+ if (ret < 0)
+ goto error;
+
+ ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
+ MII_88E1510_GEN_CTRL_REG_1_RESET);
+
+error:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
+static void m88e1510_sfp_remove(void *upstream)
+{
+ struct phy_device *phydev = upstream;
+ int oldpage;
+ int ret = 0;
+
+ oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE);
+ if (oldpage < 0)
+ goto error;
+
+ ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
+ MII_88E1510_GEN_CTRL_REG_1_MODE_MASK,
+ MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII);
+ if (ret < 0)
+ goto error;
+
+ ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
+ MII_88E1510_GEN_CTRL_REG_1_RESET);
+
+error:
+ phy_restore_page(phydev, oldpage, ret);
+}
+
+static const struct sfp_upstream_ops m88e1510_sfp_ops = {
+ .module_insert = m88e1510_sfp_insert,
+ .module_remove = m88e1510_sfp_remove,
+ .attach = phy_sfp_attach,
+ .detach = phy_sfp_detach,
+};
+
+static int m88e1510_probe(struct phy_device *phydev)
+{
+ int err;
+
+ err = marvell_probe(phydev);
+ if (err)
+ return err;
+
+ return phy_sfp_probe(phydev, &m88e1510_sfp_ops);
+}
+
static struct phy_driver marvell_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88E1101,
@@ -2927,7 +3030,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
.features = PHY_GBIT_FIBRE_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
- .probe = marvell_probe,
+ .probe = m88e1510_probe,
.config_init = m88e1510_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
--
2.31.1
Hello:
This patch was applied to netdev/net-next.git (refs/heads/master):
On Thu, 12 Aug 2021 16:42:56 +0300 you wrote:
> Add support for SFP cages connected to the Marvell 88E1512 transceiver.
> 88E1512 supports for SGMII/1000Base-X/100Base-FX media type with RGMII
> on system interface. Configure PHY to appropriate mode depending on the
> type of SFP inserted. On SFP removal configure PHY to the RGMII-copper
> mode so RJ-45 port can still work.
>
> Signed-off-by: Ivan Bornyakov <[email protected]>
>
> [...]
Here is the summary with links:
- [net-next] net: phy: marvell: add SFP support for 88E1510
https://git.kernel.org/netdev/net-next/c/b697d9d38a5a
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html