Add support for runtime features by using an IOCTL call. The features
can be enabled or disabled on the firmware as well as the features
can configure at runtime by querying IOCTL_SET_FEATURE_CONFIG id.
Similarly, the user can get the configured values of features by
querying IOCTL_GET_FEATURE_CONFIG id. Here, we have added support for
the over temperature and external watchdog features only.
Signed-off-by: Ronak Jain <[email protected]>
---
drivers/firmware/xilinx/zynqmp.c | 27 +++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 25 +++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 15b138326ecc..e2b0a8fb6f44 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1049,6 +1049,33 @@ int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
0, 0, NULL);
}
+/**
+ * zynqmp_pm_set_feature_config - PM call to request IOCTL for feature config
+ * @id: The config ID of the feature to be configured
+ * @value: The config value of the feature to be configured
+ *
+ * Return: Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_FEATURE_CONFIG,
+ id, value, NULL);
+}
+
+/**
+ * zynqmp_pm_get_feature_config - PM call to get value of configured feature
+ * @id: The config id of the feature to be queried
+ * @payload: Returned value array
+ *
+ * Return: Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
+ u32 *payload)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_FEATURE_CONFIG,
+ id, 0, payload);
+}
+
/**
* struct zynqmp_pm_shutdown_scope - Struct for shutdown scope
* @subtype: Shutdown subtype
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 9d1a5c175065..06d82e334d2b 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -119,6 +119,9 @@ enum pm_ioctl_id {
IOCTL_READ_PGGS = 15,
/* Set healthy bit value */
IOCTL_SET_BOOT_HEALTH_STATUS = 17,
+ /* Runtime feature configuration */
+ IOCTL_SET_FEATURE_CONFIG = 26,
+ IOCTL_GET_FEATURE_CONFIG = 27,
};
enum pm_query_id {
@@ -347,6 +350,14 @@ enum zynqmp_pm_shutdown_subtype {
ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM = 2,
};
+enum pm_feature_config_id {
+ PM_FEATURE_INVALID = 0,
+ PM_FEATURE_OVERTEMP_STATUS = 1,
+ PM_FEATURE_OVERTEMP_VALUE = 2,
+ PM_FEATURE_EXTWDT_STATUS = 3,
+ PM_FEATURE_EXTWDT_VALUE = 4,
+};
+
/**
* struct zynqmp_pm_query_data - PM query data
* @qid: query ID
@@ -411,6 +422,8 @@ int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
u32 *value);
int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
u32 value);
+int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
+int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
#else
static inline int zynqmp_pm_get_api_version(u32 *version)
{
@@ -622,6 +635,18 @@ static inline int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_set_feature_config(enum pm_feature_config_id id,
+ u32 value)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
+ u32 *payload)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.32.0.93.g670b81a
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.