2021-08-17 13:09:18

by Ronak Jain

[permalink] [raw]
Subject: [PATCH 0/3] Add support for runtime features

Adds support for runtime feature configuration by using the IOCTL
calls. The user can enable or disable as well as can configure the
runtime features. The support is added for the over temperature and
external watchdog. The user can configure the over temperature limit
and external watchdog timer interval at runtime by using PM_IOCTL
calls.

Also, added support for sysfs interface for runtime feature
configuration for the over temperature and external watchdog features.

Ronak Jain (3):
firmware: xilinx: Add support for runtime features
firmware: zynqmp: Add sysfs entry for runtime features
firmware: xilinx: Add sysfs support for feature config

.../ABI/stable/sysfs-driver-firmware-zynqmp | 84 ++++++++++++++++
drivers/firmware/xilinx/zynqmp.c | 98 +++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 25 +++++
3 files changed, 207 insertions(+)

--
2.32.0.93.g670b81a

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.


2021-08-17 13:11:49

by Ronak Jain

[permalink] [raw]
Subject: [PATCH 2/3] firmware: zynqmp: Add sysfs entry for runtime features

Create sysfs entry for runtime feature configuration. Here the support
is added for an over temperature and external watchdog feature.

The below listed path is used for runtime features configuration:
/sys/devices/platform/firmware\:zynqmp-firmware/*

Here there are two files to configure features at runtime.
1. feature_config_id
2. feature_config_value

In order to configure an over temperature or external watchdog
features, first the user need to select the valid config id and then
the user can configure the value for selected feature config id.

Signed-off-by: Ronak Jain <[email protected]>
---
.../ABI/stable/sysfs-driver-firmware-zynqmp | 84 +++++++++++++++++++
1 file changed, 84 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
index f5724bb5b462..2fde354715a5 100644
--- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -113,3 +113,87 @@ Description:
# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status

Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_*
+Date: Aug 2021
+KernelVersion: 5.14
+Contact: "Ronak Jain" <[email protected]>
+Description:
+ This sysfs interface allows to configure features at runtime.
+ The user can enable or disable features running at firmware.
+ Also, the user can configure the parameters of the features
+ at runtime. The supported features are over temperature and
+ external watchdog. Here, the external watchdog is completely
+ different than the /dev/watchdog as the external watchdog is
+ running on the firmware and it is used to monitor the health
+ of firmware not APU(Linux). Also, the external watchdog is
+ interfaced outside of the zynqmp soc.
+
+ By default the features are disabled in the firmware. The user
+ can enable features by querying appropriate config id of the
+ features.
+
+ The default limit for the over temperature is 90 Degree Celsius.
+ The default timer interval for the external watchdog is 570ms.
+
+ The supported config ids are for the feature configuration is,
+ 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+ disable the over temperature feature.
+ 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+ over temperature limit in Degree Celsius.
+ 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+ the external watchdog feature.
+ 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+ external watchdog feature.
+
+ Usage:
+
+ Enable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure over temperature limit to 50 Degree Celsius
+ # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature limit is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 50.
+
+ Enable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure external watchdog timer interval to 500ms
+ # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog timer interval is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 500.
+
+Users: Xilinx
--
2.32.0.93.g670b81a

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

2021-08-18 06:44:55

by Michael Tretter

[permalink] [raw]
Subject: Re: [PATCH 0/3] Add support for runtime features

Hi Ronak,

On Tue, 17 Aug 2021 06:05:50 -0700, Ronak Jain wrote:
> Adds support for runtime feature configuration by using the IOCTL
> calls. The user can enable or disable as well as can configure the
> runtime features. The support is added for the over temperature and
> external watchdog. The user can configure the over temperature limit
> and external watchdog timer interval at runtime by using PM_IOCTL
> calls.
>
> Also, added support for sysfs interface for runtime feature
> configuration for the over temperature and external watchdog features.

Can we have proper kernel drivers instead of the sysfs interface?

Michael

>
> Ronak Jain (3):
> firmware: xilinx: Add support for runtime features
> firmware: zynqmp: Add sysfs entry for runtime features
> firmware: xilinx: Add sysfs support for feature config
>
> .../ABI/stable/sysfs-driver-firmware-zynqmp | 84 ++++++++++++++++
> drivers/firmware/xilinx/zynqmp.c | 98 +++++++++++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 25 +++++
> 3 files changed, 207 insertions(+)
>
> --
> 2.32.0.93.g670b81a
>
> This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

2021-08-18 08:10:38

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 0/3] Add support for runtime features

On Tue, Aug 17, 2021 at 06:05:50AM -0700, Ronak Jain wrote:
> This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

This footer means that this has to be ignored and can not be used for
kernel development at all.

2021-08-19 04:01:06

by Ronak Jain

[permalink] [raw]
Subject: RE: [PATCH 0/3] Add support for runtime features

Hi Greg KH,

Thanks for reviewing.

I will fix footer and submit new version.

Thanks,
Ronak

> -----Original Message-----
> From: Greg KH <[email protected]>
> Sent: Wednesday, August 18, 2021 1:38 PM
> To: Ronak Jain <[email protected]>
> Cc: Michal Simek <[email protected]>; [email protected]; Rajan
> Vaja <[email protected]>; [email protected]; linux-arm-
> [email protected]; [email protected]; Sai Krishna Potthuri
> <[email protected]>
> Subject: Re: [PATCH 0/3] Add support for runtime features
>
> On Tue, Aug 17, 2021 at 06:05:50AM -0700, Ronak Jain wrote:
> > This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be proprietary,
> privileged or copyrighted under applicable law. If you are not the intended
> recipient, do not read, copy, or forward this email message or any attachments.
> Delete this email message and any attachments immediately.
>
> This footer means that this has to be ignored and can not be used for kernel
> development at all.