This series applied on top of the "mfd: simple-mfd-i2c: Add support for
registering devices via MFD cells" patch. Once "mfd: simple-mfd-i2c: Add
support for registering devices via MFD cells" is merged this series is
ready to go.
v11:
- Address comments on hwmon
- Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message
v10:
- Use dev_get_regmap() instead of dev_get_drvdata()
v9:
- Convert to use the simple-mfd-i2c instead
Alistair Francis (10):
dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml
mfd: simple-mfd-i2c: Add a Kconfig name
mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a
regulator: sy7636a: Remove requirement on sy7636a mfd
thermal: sy7636a: Add thermal driver for sy7636a
hwmon: sy7636a: Add temperature driver for sy7636a
ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
ARM: imx_v6_v7_defconfig: Enable backlight class devices
ARM: dts: imx7d: remarkable2: Enable lcdif
.../bindings/mfd/silergy,sy7636a.yaml | 79 ++++++++++++
arch/arm/boot/dts/imx7d-remarkable2.dts | 115 ++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 5 +
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sy7636a-hwmon.c | 77 ++++++++++++
drivers/mfd/Kconfig | 2 +-
drivers/mfd/simple-mfd-i2c.c | 12 ++
drivers/regulator/Kconfig | 1 -
drivers/regulator/sy7636a-regulator.c | 2 +-
drivers/thermal/Kconfig | 6 +
drivers/thermal/Makefile | 1 +
drivers/thermal/sy7636a_thermal.c | 94 ++++++++++++++
include/linux/mfd/sy7636a.h | 41 +++++++
14 files changed, 443 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
create mode 100644 drivers/hwmon/sy7636a-hwmon.c
create mode 100644 drivers/thermal/sy7636a_thermal.c
create mode 100644 include/linux/mfd/sy7636a.h
--
2.31.1
Initial support for the Silergy SY7636A Power Management chip
and regulator.
Signed-off-by: Alistair Francis <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/mfd/silergy,sy7636a.yaml | 79 +++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..0566f9498e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+ - Alistair Francis <[email protected]>
+
+properties:
+ compatible:
+ const: silergy,sy7636a
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ '#thermal-sensor-cells':
+ const: 0
+
+ epd-pwr-good-gpios:
+ description:
+ Specifying the power good GPIOs.
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ properties:
+ compatible:
+ const: silergy,sy7636a-regulator
+
+ vcom:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ regulator-name:
+ const: vcom
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #thermal-sensor-cells = <0>;
+
+ regulators {
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+...
--
2.31.1
Add a Kconfig name to the "Simple Multi-Functional Device support (I2C)"
device so that it can be enabled via menuconfig.
Signed-off-by: Alistair Francis <[email protected]>
---
drivers/mfd/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6a3fd2d75f96..ff95d00dc1ac 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1176,7 +1176,7 @@ config MFD_SI476X_CORE
module will be called si476x-core.
config MFD_SIMPLE_MFD_I2C
- tristate
+ tristate "Simple Multi-Functional Device support (I2C)"
depends on I2C
select REGMAP_I2C
help
--
2.31.1
Signed-off-by: Alistair Francis <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
---
drivers/mfd/simple-mfd-i2c.c | 12 +++++++++++
include/linux/mfd/sy7636a.h | 41 ++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 include/linux/mfd/sy7636a.h
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 583e8c7924af..ce213c68b8cf 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -62,8 +62,20 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
return ret;
}
+static const struct mfd_cell sy7636a_cells[] = {
+ { .name = "sy7636a-regulator", },
+ { .name = "sy7636a-temperature", },
+ { .name = "sy7636a-thermal", },
+};
+
+static const struct simple_mfd_data silergy_sy7636a = {
+ .mfd_cell = sy7636a_cells,
+ .mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
+};
+
static const struct of_device_id simple_mfd_i2c_of_match[] = {
{ .compatible = "kontron,sl28cpld" },
+ { .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
{}
};
MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h
new file mode 100644
index 000000000000..15caa54f0432
--- /dev/null
+++ b/include/linux/mfd/sy7636a.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Functions to access SY3686A power management chip.
+ *
+ * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/
+ */
+
+#ifndef __MFD_SY7636A_H
+#define __MFD_SY7636A_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define SY7636A_REG_OPERATION_MODE_CRL 0x00
+#define SY7636A_OPERATION_MODE_CRL_VCOMCTL BIT(6)
+#define SY7636A_OPERATION_MODE_CRL_ONOFF BIT(7)
+#define SY7636A_REG_VCOM_ADJUST_CTRL_L 0x01
+#define SY7636A_REG_VCOM_ADJUST_CTRL_H 0x02
+#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK 0x01ff
+#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL 0x03
+#define SY7636A_REG_POWER_ON_DELAY_TIME 0x06
+#define SY7636A_REG_FAULT_FLAG 0x07
+#define SY7636A_FAULT_FLAG_PG BIT(0)
+#define SY7636A_REG_TERMISTOR_READOUT 0x08
+
+#define SY7636A_REG_MAX 0x08
+
+#define VCOM_MIN 0
+#define VCOM_MAX 5000
+
+#define VCOM_ADJUST_CTRL_MASK 0x1ff
+// Used to shift the high byte
+#define VCOM_ADJUST_CTRL_SHIFT 8
+// Used to scale from VCOM_ADJUST_CTRL to mv
+#define VCOM_ADJUST_CTRL_SCAL 10000
+
+#define FAULT_FLAG_SHIFT 1
+
+#endif /* __LINUX_MFD_SY7636A_H */
--
2.31.1
Signed-off-by: Alistair Francis <[email protected]>
---
drivers/regulator/Kconfig | 1 -
drivers/regulator/sy7636a-regulator.c | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 24ce9a17ab4f..54ba141d114a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1179,7 +1179,6 @@ config REGULATOR_STW481X_VMMC
config REGULATOR_SY7636A
tristate "Silergy SY7636A voltage regulator"
- depends on MFD_SY7636A
help
This driver supports Silergy SY3686A voltage regulator.
diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index 8360b3947ead..22fddf868e4c 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -70,7 +70,7 @@ static const struct regulator_desc desc = {
static int sy7636a_regulator_probe(struct platform_device *pdev)
{
- struct regmap *regmap = dev_get_drvdata(pdev->dev.parent);
+ struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
struct regulator_config config = { };
struct regulator_dev *rdev;
struct gpio_desc *gdp;
--
2.31.1
Add thermal driver to enable kernel based polling
and shutdown of device for temperatures out of spec
Signed-off-by: Alistair Francis <[email protected]>
---
drivers/thermal/Kconfig | 6 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/sy7636a_thermal.c | 94 +++++++++++++++++++++++++++++++
3 files changed, 101 insertions(+)
create mode 100644 drivers/thermal/sy7636a_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44deab5b1..6ee0e7de1b37 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,6 +450,12 @@ depends on (ARCH_STI || ARCH_STM32) && OF
source "drivers/thermal/st/Kconfig"
endmenu
+config SY7636A_THERMAL
+ tristate "SY7636A thermal management"
+ help
+ Enable the sy7636a thermal driver, which supports the
+ temperature sensor embedded in Silabs SY7636A IC.
+
source "drivers/thermal/tegra/Kconfig"
config GENERIC_ADC_THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e616e54..2e1aca8a0a09 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
obj-y += intel/
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-y += st/
+obj-$(CONFIG_SY7636A_THERMAL) += sy7636a_thermal.o
obj-$(CONFIG_QCOM_TSENS) += qcom/
obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
diff --git a/drivers/thermal/sy7636a_thermal.c b/drivers/thermal/sy7636a_thermal.c
new file mode 100644
index 000000000000..9e58305ca3ce
--- /dev/null
+++ b/drivers/thermal/sy7636a_thermal.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <[email protected]>
+ * Alistair Francis <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static int sy7636a_get_temp(void *arg, int *res)
+{
+ unsigned int mode_ctr;
+ int ret, reg_val;
+ struct regmap *regmap = arg;
+ bool isVoltageActive;
+
+ ret = regmap_read(regmap,
+ SY7636A_REG_OPERATION_MODE_CRL, &mode_ctr);
+ if (ret)
+ return ret;
+
+ isVoltageActive = mode_ctr & SY7636A_OPERATION_MODE_CRL_ONOFF;
+
+ /* If operation mode isn't set to control, then let's set it. */
+ if (!isVoltageActive) {
+ ret = regmap_write(regmap,
+ SY7636A_REG_OPERATION_MODE_CRL,
+ mode_ctr | SY7636A_OPERATION_MODE_CRL_ONOFF);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(regmap,
+ SY7636A_REG_TERMISTOR_READOUT, ®_val);
+ if (ret)
+ return ret;
+
+ /* Restore the operation mode if it wasn't set */
+ if (!isVoltageActive) {
+ ret = regmap_write(regmap,
+ SY7636A_REG_OPERATION_MODE_CRL,
+ mode_ctr);
+ if (ret)
+ return ret;
+ }
+
+ *res = reg_val * 1000;
+
+ return ret;
+}
+
+static const struct thermal_zone_of_device_ops ops = {
+ .get_temp = sy7636a_get_temp,
+};
+
+static int sy7636a_thermal_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ struct thermal_zone_device *thermal_zone_dev;
+
+ thermal_zone_dev = devm_thermal_zone_of_sensor_register(
+ pdev->dev.parent,
+ 0,
+ regmap,
+ &ops);
+
+ return PTR_ERR_OR_ZERO(thermal_zone_dev);
+}
+
+static const struct platform_device_id sy7636a_thermal_id_table[] = {
+ { "sy7636a-thermal", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_thermal_id_table);
+
+static struct platform_driver sy7636a_thermal_driver = {
+ .driver = {
+ .name = "sy7636a-thermal",
+ },
+ .probe = sy7636a_thermal_probe,
+ .id_table = sy7636a_thermal_id_table,
+};
+module_platform_driver(sy7636a_thermal_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <[email protected]>");
+MODULE_DESCRIPTION("SY7636A thermal driver");
+MODULE_LICENSE("GPL v2");
--
2.31.1
This is a multi-function device to interface with the sy7636a
EPD PMIC chip from Silergy.
Signed-off-by: Alistair Francis <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/hwmon/Kconfig | 10 ++++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sy7636a-hwmon.c | 77 ++++++++++++++++++++++++++++
4 files changed, 89 insertions(+)
create mode 100644 drivers/hwmon/sy7636a-hwmon.c
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 477dac1edc75..ef8c6dca1277 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -229,6 +229,7 @@ CONFIG_RN5T618_POWER=m
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_SY7636A=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_CPU_THERMAL=y
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e3675377bc5d..6cae12de59cd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1631,6 +1631,16 @@ config SENSORS_SIS5595
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_SY7636A
+ tristate "Silergy SY7636A"
+ depends on I2C
+ help
+ If you say yes here you get support for the thermistor readout of
+ the Silergy SY7636A PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called sy7636a-hwmon.
+
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
depends on I2C && !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d712c61c1f5e..8b2e09e25b24 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
obj-$(CONFIG_SENSORS_STTS751) += stts751.o
+obj-$(CONFIG_SENSORS_SY7636A) += sy7636a-hwmon.o
obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_TC74) += tc74.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
new file mode 100644
index 000000000000..e0204278339b
--- /dev/null
+++ b/drivers/hwmon/sy7636a-hwmon.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <[email protected]>
+ * Alistair Francis <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned int reg_val;
+ struct regmap *regmap = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_read(regmap,
+ SY7636A_REG_TERMISTOR_READOUT, ®_val);
+ if (ret)
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", reg_val);
+}
+
+static SENSOR_DEVICE_ATTR(temp0, 0444, show_temp, NULL, 0);
+
+static struct attribute *sy7636a_attrs[] = {
+ &sensor_dev_attr_temp0.dev_attr.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(sy7636a);
+
+static int sy7636a_sensor_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ struct device *hwmon_dev;
+ int err;
+
+ if (!regmap)
+ return -EPROBE_DEFER;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "sy7636a_temperature", regmap, sy7636a_groups);
+
+ if (IS_ERR(hwmon_dev)) {
+ err = PTR_ERR(hwmon_dev);
+ dev_err(&pdev->dev, "Unable to register hwmon device, returned %d", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static struct platform_driver sy7636a_sensor_driver = {
+ .probe = sy7636a_sensor_probe,
+ .driver = {
+ .name = "sy7636a-temperature",
+ },
+};
+module_platform_driver(sy7636a_sensor_driver);
+
+MODULE_DESCRIPTION("SY7636A sensor driver");
+MODULE_LICENSE("GPL");
--
2.31.1
Enable the silergy,sy7636a and silergy,sy7636a-regulator for the
reMarkable2.
Signed-off-by: Alistair Francis <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index ef8c6dca1277..0ac7c61c6f3d 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -234,6 +234,7 @@ CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_CPU_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_SY7636A_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=m
@@ -249,6 +250,7 @@ CONFIG_MFD_RN5T618=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9062=y
@@ -258,6 +260,7 @@ CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_RN5T618=y
+CONFIG_REGULATOR_SY7636A=y
CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
--
2.31.1
Connect the dispaly on the reMarkable2.
Signed-off-by: Alistair Francis <[email protected]>
---
arch/arm/boot/dts/imx7d-remarkable2.dts | 74 +++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index ab2f61d9c635..7a48ffb14498 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -47,6 +47,16 @@ reg_digitizer: regulator-digitizer {
startup-delay-us = <100000>; /* 100 ms */
};
+ reg_sdoe: regulator-sdoe {
+ compatible = "regulator-fixed";
+ regulator-name = "SDOE";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sdoe_reg>;
+ pinctrl-1 = <&pinctrl_sdoe_reg>;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -55,6 +65,16 @@ wifi_pwrseq: wifi_pwrseq {
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
+
+ panel {
+ compatible = "eink,vb3300-kca";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&clks {
@@ -113,6 +133,20 @@ reg_epdpmic: vcom {
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ lcd-supply = <®_epdpmic>;
+ lcd2-supply = <®_sdoe>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -227,6 +261,46 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_sdoe_reg: sdoereggrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
The BACKLIGHT_CLASS_DEVICE config is required for the already enabled
DRM_SIMPLE_PANEL to work so let's enable BACKLIGHT_CLASS_DEVICE.
This allows the mxsfb probe to complete successfully on the reMarkable
2.
Signed-off-by: Alistair Francis <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0ac7c61c6f3d..486c59cdb174 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -300,6 +300,7 @@ CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
--
2.31.1
Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.
Signed-off-by: Alistair Francis <[email protected]>
---
arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 052f9da32398..ab2f61d9c635 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -86,6 +86,33 @@ wacom_digitizer: digitizer@9 {
};
};
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ epd_pmic: sy7636a@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <0>;
+
+ epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ regulators {
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -179,6 +206,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_epdpmic: epdpmicgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
@@ -186,6 +220,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
On Thu, Aug 19, 2021 at 9:15 PM Alistair Francis <[email protected]> wrote:
>
> This series applied on top of the "mfd: simple-mfd-i2c: Add support for
> registering devices via MFD cells" patch. Once "mfd: simple-mfd-i2c: Add
> support for registering devices via MFD cells" is merged this series is
> ready to go.
>
> v11:
> - Address comments on hwmon
> - Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message
> v10:
> - Use dev_get_regmap() instead of dev_get_drvdata()
> v9:
> - Convert to use the simple-mfd-i2c instead
>
> Alistair Francis (10):
> dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml
> mfd: simple-mfd-i2c: Add a Kconfig name
> mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a
> regulator: sy7636a: Remove requirement on sy7636a mfd
> thermal: sy7636a: Add thermal driver for sy7636a
> hwmon: sy7636a: Add temperature driver for sy7636a
> ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
> ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
> ARM: imx_v6_v7_defconfig: Enable backlight class devices
> ARM: dts: imx7d: remarkable2: Enable lcdif
It doesn't look like "mfd: simple-mfd-i2c: Add support for registering
devices via MFD cells" has made it into 5.15, is something else
required?
Alistair
>
> .../bindings/mfd/silergy,sy7636a.yaml | 79 ++++++++++++
> arch/arm/boot/dts/imx7d-remarkable2.dts | 115 ++++++++++++++++++
> arch/arm/configs/imx_v6_v7_defconfig | 5 +
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/sy7636a-hwmon.c | 77 ++++++++++++
> drivers/mfd/Kconfig | 2 +-
> drivers/mfd/simple-mfd-i2c.c | 12 ++
> drivers/regulator/Kconfig | 1 -
> drivers/regulator/sy7636a-regulator.c | 2 +-
> drivers/thermal/Kconfig | 6 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/sy7636a_thermal.c | 94 ++++++++++++++
> include/linux/mfd/sy7636a.h | 41 +++++++
> 14 files changed, 443 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
> create mode 100644 drivers/hwmon/sy7636a-hwmon.c
> create mode 100644 drivers/thermal/sy7636a_thermal.c
> create mode 100644 include/linux/mfd/sy7636a.h
>
> --
> 2.31.1
>